mirror of
https://github.com/libretro/virtualjaguar-libretro.git
synced 2026-11-07 12:47:58 -10:00
Joseph MattielloandClaude Sonnet 5.5
a20867bd2d
- install.ps1: the interactive channel choice is a local assignment ($script: missed the parameter under & ([scriptblock]::Create(...))); silence progress for 5.1; portable zip is one top folder, its CONTENTS go to the destination; setup default args are /VERYSILENT /NORESTART /SUPPRESSMSGBOXES and the Inno AppId uninstall key is checked first. - install.sh: AppImage menu entry and icon use io.github.libretro.VirtualJaguar (hicolor tree extracted from the AppImage); FUSE probe checks /sbin/ldconfig and multiarch dirs without globs (zsh); a nightly receipt beats the project version Info.plist/dpkg report, so a release is still offered over a nightly. - tests and CI: portable file:// URLs, narrower dry-run snapshots, 5.1-safe child-process error handling, nightly-vs-release checks, documented PSScriptAnalyzer exclusions. Refs #840 Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
1329 lines
52 KiB
Bash
Executable File
1329 lines
52 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Virtual Jaguar -- installer / updater for the RetroArch core and the app.
|
|
#
|
|
# https://github.com/libretro/virtualjaguar-libretro
|
|
#
|
|
# POSIX sh. Runs under sh, bash, zsh, dash, busybox ash. Safe to pipe:
|
|
#
|
|
# curl -fsSL https://raw.githubusercontent.com/libretro/virtualjaguar-libretro/develop/tools/install.sh | sh
|
|
#
|
|
# Piping into a shell means stdin is the script, so prompts read /dev/tty
|
|
# instead. Where there is no tty (CI, a pipe with no terminal) the script goes
|
|
# non-interactive and uses defaults rather than hanging on a read.
|
|
#
|
|
# Read it before you run it -- sensible for anything off the internet, and the
|
|
# core install may ask for sudo. `--dry-run` prints the whole plan and changes
|
|
# nothing.
|
|
#
|
|
# Usage:
|
|
# ./install.sh interactive when a terminal is present
|
|
# ./install.sh --yes no prompts, all defaults
|
|
# ./install.sh --what core|app|both what to install or update (default: ask;
|
|
# no terminal -> the core, plus the app if
|
|
# this script installed it before)
|
|
# ./install.sh --core | --app | --both same, shorter
|
|
# ./install.sh --channel nightly
|
|
# ./install.sh --channel v3.5.1
|
|
# ./install.sh --dest /path/to/cores core: skip frontend discovery
|
|
# ./install.sh --app-dest /path app: Applications dir (macOS) or bin dir (Linux)
|
|
# ./install.sh --app-format F app: zip|dmg (macOS), appimage|deb (Linux)
|
|
# ./install.sh --allow-unsigned macOS: allow clearing quarantine on an
|
|
# app Gatekeeper rejects (see below)
|
|
# ./install.sh --force reinstall even if already up to date
|
|
# ./install.sh --list show what was found, install nothing
|
|
# ./install.sh --dry-run
|
|
# ./install.sh --auto-update weekly install a background updater
|
|
# ./install.sh --auto-update off remove it
|
|
#
|
|
# Environment:
|
|
# VJ_INSTALL_BASE_URL release host, default https://github.com/<repo>/releases
|
|
# (the layout is <base>/latest/download/<file> and
|
|
# <base>/download/<tag>/<file>; file:// works)
|
|
# VJ_INSTALL_RETROARCH path to the RetroArch binary, skips the search
|
|
# VJ_INSTALL_NO_TTY 1 = behave as if there were no terminal (tests, CI)
|
|
#
|
|
# THE APP
|
|
# macOS Virtual Jaguar.app from the zip (or the DMG) into /Applications, or
|
|
# ~/Applications when that is not writable. Updated where it already is.
|
|
# Linux the AppImage into ~/.local/bin plus a .desktop entry; or the .deb
|
|
# through apt/dpkg with --app-format deb (that needs sudo). x86_64 and
|
|
# aarch64 builds only, chosen from the USERLAND, not the kernel.
|
|
# Every download is checked against the release's SHA256SUMS.txt first.
|
|
# Windows is install.ps1.
|
|
#
|
|
# Gatekeeper: files fetched with curl carry no quarantine flag, so a signed and
|
|
# notarized app opens without a prompt and this script never touches its
|
|
# protections. The one exception: if the app is rejected by `spctl` AND carries
|
|
# a quarantine flag, the flag is cleared only after you say yes (or pass
|
|
# --allow-unsigned). --yes alone never does it.
|
|
#
|
|
# ---------------------------------------------------------------------------
|
|
# THE MISTAKE THIS EXISTS TO PREVENT
|
|
#
|
|
# Release builds are named by board AND word size: `rpi4` is 32-bit armhf,
|
|
# `rpi4_64` is 64-bit aarch64. Picking by `uname -m` gets this wrong on the
|
|
# many Raspberry Pi setups that run a 64-bit KERNEL with a 32-bit USERLAND --
|
|
# uname says `aarch64` while every binary is 32-bit. Install the 64-bit core
|
|
# there and RetroArch says only "Failed to open libretro core".
|
|
#
|
|
# The core must match RETROARCH, not the kernel. So the word size is read out
|
|
# of the RetroArch binary itself, and a mismatch aborts before anything is
|
|
# written. The app's Linux builds follow the same rule: they are matched to
|
|
# the userland (read from /bin/sh), never to the kernel.
|
|
# ---------------------------------------------------------------------------
|
|
|
|
set -eu
|
|
|
|
REPO="libretro/virtualjaguar-libretro"
|
|
RAW="https://raw.githubusercontent.com/$REPO/develop/tools/install.sh"
|
|
BASE="${VJ_INSTALL_BASE_URL:-https://github.com/$REPO/releases}"
|
|
BASE="${BASE%/}"
|
|
CORE_NAME="virtualjaguar_libretro"
|
|
MAC_APP_NAME="Virtual Jaguar.app"
|
|
APPIMAGE_NAME="VirtualJaguar.AppImage"
|
|
DEB_PKG="virtualjaguar"
|
|
|
|
CHANNEL="latest"
|
|
DEST=""
|
|
APP_DEST=""
|
|
APP_FORMAT=""
|
|
WHAT=""
|
|
ASSUME_YES=0
|
|
DRY_RUN=0
|
|
LIST_ONLY=0
|
|
FORCE=0
|
|
ALLOW_UNSIGNED=0
|
|
AUTO_UPDATE=""
|
|
CORE_SOFT=0
|
|
|
|
# --------------------------------------------------------------------------
|
|
# output helpers
|
|
# --------------------------------------------------------------------------
|
|
if [ -t 1 ] && [ -z "${NO_COLOR:-}" ]; then
|
|
B=$(printf '\033[1m'); D=$(printf '\033[2m'); R=$(printf '\033[0m')
|
|
GRN=$(printf '\033[32m'); YLW=$(printf '\033[33m'); RED=$(printf '\033[31m')
|
|
else
|
|
B=''; D=''; R=''; GRN=''; YLW=''; RED=''
|
|
fi
|
|
say() { printf '%s\n' "$*"; }
|
|
step() { printf '\n%s==>%s %s%s%s\n' "$GRN" "$R" "$B" "$*" "$R"; }
|
|
ok() { printf ' %s+%s %s\n' "$GRN" "$R" "$*"; }
|
|
note() { printf ' %s-%s %s\n' "$D" "$R" "$*"; }
|
|
warn() { printf ' %s!%s %s\n' "$YLW" "$R" "$*" >&2; }
|
|
die() { printf '\n%sERROR%s %s\n' "$RED" "$R" "$*" >&2; exit 1; }
|
|
|
|
# Run a file-mutating command, elevating only when we actually need to.
|
|
#
|
|
# `command` on the non-sudo path bypasses any alias or shell function named
|
|
# rm/cp/mv -- the interactive `-i` variants are a common default, and a prompt
|
|
# with nothing attached to answer it blocks forever rather than failing.
|
|
# The sudo path needs no such guard (sudo execs the binary, never a shell
|
|
# alias) and could not take one anyway, since `command` is a shell builtin.
|
|
# $SUDO is set just before the install step; empty means "we can write here".
|
|
as_root() {
|
|
if [ -n "${SUDO:-}" ]; then sudo "$@"; else command "$@"; fi
|
|
}
|
|
|
|
# --------------------------------------------------------------------------
|
|
# interactivity
|
|
#
|
|
# When piped, stdin is the script text, so reading it would consume the script
|
|
# or block. /dev/tty is the user's terminal regardless of redirection -- if it
|
|
# is not openable there is genuinely no one to ask.
|
|
# --------------------------------------------------------------------------
|
|
TTY=""
|
|
# VJ_INSTALL_NO_TTY=1 forces the no-terminal path (the test suite runs from terminals).
|
|
if [ -z "${VJ_INSTALL_NO_TTY:-}" ] && [ -r /dev/tty ] && [ -w /dev/tty ] 2>/dev/null; then TTY=/dev/tty; fi
|
|
INTERACTIVE=0
|
|
[ -n "$TTY" ] && INTERACTIVE=1
|
|
|
|
ask() {
|
|
# ask "<prompt>" "<default>" -> echoes the answer
|
|
_p="$1"; _d="$2"
|
|
if [ "$INTERACTIVE" -eq 0 ] || [ "$ASSUME_YES" -eq 1 ]; then
|
|
printf '%s' "$_d"; return 0
|
|
fi
|
|
printf '%s [%s]: ' "$_p" "$_d" > "$TTY"
|
|
IFS= read -r _a < "$TTY" || _a=""
|
|
[ -n "$_a" ] || _a="$_d"
|
|
printf '%s' "$_a"
|
|
}
|
|
|
|
confirm() {
|
|
# confirm "<prompt>" -> 0 for yes
|
|
[ "$ASSUME_YES" -eq 1 ] && return 0
|
|
[ "$INTERACTIVE" -eq 0 ] && return 0
|
|
printf '%s [Y/n]: ' "$1" > "$TTY"
|
|
IFS= read -r _a < "$TTY" || _a=""
|
|
case "$_a" in [nN]*) return 1 ;; *) return 0 ;; esac
|
|
}
|
|
|
|
confirm_no() {
|
|
# confirm_no "<prompt>" -> 0 only on an explicit yes; default NO, and NO
|
|
# whenever nobody can be asked. For the one decision that weakens a protection.
|
|
[ "$INTERACTIVE" -eq 0 ] && return 1
|
|
[ "$ASSUME_YES" -eq 1 ] && return 1
|
|
printf '%s [y/N]: ' "$1" > "$TTY"
|
|
IFS= read -r _a < "$TTY" || _a=""
|
|
case "$_a" in [yY]*) return 0 ;; *) return 1 ;; esac
|
|
}
|
|
|
|
# How to tell the user to re-run us. When piped into a shell, $0 is the shell
|
|
# name and not a file, so neither `sed "$0"` nor a `$0 --flag` hint works.
|
|
if [ -r "$0" ] && [ "$0" != "sh" ] && [ "$0" != "-sh" ] && [ "$0" != "bash" ]; then
|
|
SELF="$0"; SELF_IS_FILE=1
|
|
else
|
|
SELF="curl -fsSL $RAW | sh -s --"; SELF_IS_FILE=0
|
|
fi
|
|
|
|
usage() {
|
|
if [ "$SELF_IS_FILE" -eq 1 ]; then
|
|
sed -n '3,/^# ---/{/^# ---/!p;}' "$SELF" | sed 's/^#\{1,\} \{0,1\}//'
|
|
else
|
|
cat <<'USAGE'
|
|
Virtual Jaguar -- installer / updater for the RetroArch core and the app.
|
|
https://github.com/libretro/virtualjaguar-libretro
|
|
|
|
--what core|app|both what to install or update (--core --app --both)
|
|
--channel latest|nightly|<tag> which build (default: latest)
|
|
--dest <dir> core: install here, skip frontend discovery
|
|
--app-dest <dir> app: Applications dir (macOS) / bin dir (Linux)
|
|
--app-format zip|dmg|appimage|deb app package (default: zip / appimage)
|
|
--allow-unsigned macOS: may clear quarantine on a rejected app
|
|
--force reinstall even if already up to date
|
|
--list show what was found, install nothing
|
|
--dry-run print the plan, change nothing
|
|
--yes no prompts, take every default
|
|
--auto-update daily|weekly|off background updater
|
|
--help
|
|
|
|
Piped into a shell, prompts read /dev/tty; with no tty it takes defaults.
|
|
Windows: use install.ps1. Download this script and read it first if you like:
|
|
curl -fLO https://raw.githubusercontent.com/libretro/virtualjaguar-libretro/develop/tools/install.sh
|
|
USAGE
|
|
fi
|
|
exit 0
|
|
}
|
|
|
|
while [ $# -gt 0 ]; do
|
|
case "$1" in
|
|
--channel) CHANNEL="${2:-}"; [ -n "$CHANNEL" ] || die "--channel needs a value"; shift 2 ;;
|
|
--dest) DEST="${2:-}"; [ -n "$DEST" ] || die "--dest needs a path"; shift 2 ;;
|
|
--app-dest) APP_DEST="${2:-}"; [ -n "$APP_DEST" ] || die "--app-dest needs a path"; shift 2 ;;
|
|
--app-format) APP_FORMAT="${2:-}"; [ -n "$APP_FORMAT" ] || die "--app-format needs a value"; shift 2 ;;
|
|
--what) WHAT="${2:-}"; [ -n "$WHAT" ] || die "--what needs core, app or both"; shift 2 ;;
|
|
--core) WHAT=core; shift ;;
|
|
--app) WHAT=app; shift ;;
|
|
--both) WHAT=both; shift ;;
|
|
--auto-update) AUTO_UPDATE="${2:-}"; [ -n "$AUTO_UPDATE" ] || die "--auto-update needs daily|weekly|off"; shift 2 ;;
|
|
--yes|-y) ASSUME_YES=1; shift ;;
|
|
--dry-run) DRY_RUN=1; shift ;;
|
|
--list) LIST_ONLY=1; shift ;;
|
|
--force) FORCE=1; shift ;;
|
|
--allow-unsigned) ALLOW_UNSIGNED=1; shift ;;
|
|
-h|--help) usage ;;
|
|
*) die "unknown option: $1 (try --help)" ;;
|
|
esac
|
|
done
|
|
|
|
case "$AUTO_UPDATE" in ''|daily|weekly|off) ;; *) die "--auto-update takes daily, weekly or off (got '$AUTO_UPDATE')" ;; esac
|
|
case "$WHAT" in ''|core|app|both) ;; *) die "--what takes core, app or both (got '$WHAT')" ;; esac
|
|
case "$APP_FORMAT" in ''|zip|dmg|appimage|deb) ;; *) die "--app-format takes zip, dmg, appimage or deb (got '$APP_FORMAT')" ;; esac
|
|
|
|
command -v curl >/dev/null 2>&1 || die "curl is required. Debian/RetroPie: sudo apt install -y curl"
|
|
|
|
# Scratch space for the whole run. Parts that run in a subshell (see main) share
|
|
# it through files, and one trap removes it.
|
|
WORK=$(mktemp -d 2>/dev/null || mktemp -d -t vjinstall) || die "could not create a temp directory"
|
|
trap 'command rm -rf "$WORK"' EXIT INT TERM
|
|
|
|
# --------------------------------------------------------------------------
|
|
# release access: URLs, SHA256SUMS.txt, hashing
|
|
# --------------------------------------------------------------------------
|
|
release_url() {
|
|
# release_url <file> -> URL of that file on the selected channel
|
|
case "$CHANNEL" in
|
|
latest) printf '%s/latest/download/%s' "$BASE" "$1" ;;
|
|
nightly) printf '%s/download/nightly/%s' "$BASE" "$1" ;;
|
|
*) printf '%s/download/%s/%s' "$BASE" "$CHANNEL" "$1" ;;
|
|
esac
|
|
}
|
|
|
|
# Fetch SHA256SUMS.txt once per run. Returns 1 when the channel has none.
|
|
ensure_sums() {
|
|
[ -s "$WORK/SHA256SUMS.txt" ] && return 0
|
|
curl -fsSL --retry 3 -o "$WORK/SHA256SUMS.txt" "$(release_url SHA256SUMS.txt)" 2>/dev/null || {
|
|
command rm -f "$WORK/SHA256SUMS.txt"; return 1
|
|
}
|
|
[ -s "$WORK/SHA256SUMS.txt" ]
|
|
}
|
|
|
|
# First SHA256SUMS entry named <prefix>*<suffix>. Prefix/suffix are matched
|
|
# literally; a glob in a variable is NOT portable (zsh does not treat an
|
|
# unquoted expansion in a case pattern as a pattern).
|
|
sums_find() {
|
|
while read -r _h _n; do
|
|
_n=${_n#\*}
|
|
case "$_n" in
|
|
"$1"*"$2") printf '%s' "$_n"; return 0 ;;
|
|
esac
|
|
done < "$WORK/SHA256SUMS.txt"
|
|
return 1
|
|
}
|
|
|
|
sums_hash() {
|
|
while read -r _h _n; do
|
|
_n=${_n#\*}
|
|
[ "$_n" = "$1" ] && { printf '%s' "$_h" | tr 'A-F' 'a-f'; return 0; }
|
|
done < "$WORK/SHA256SUMS.txt"
|
|
return 1
|
|
}
|
|
|
|
sha256_of() {
|
|
if command -v sha256sum >/dev/null 2>&1; then sha256sum "$1" | cut -d' ' -f1
|
|
elif command -v shasum >/dev/null 2>&1; then shasum -a 256 "$1" | cut -d' ' -f1
|
|
elif command -v openssl >/dev/null 2>&1; then openssl dgst -sha256 "$1" | sed 's/.*= *//'
|
|
else return 1
|
|
fi
|
|
}
|
|
|
|
# verify_sum <file> <asset-name> -> 0 verified; 1 mismatch / unlisted (hard);
|
|
# 2 no way to check (no SHA256SUMS, or no hashing tool). Callers decide.
|
|
verify_sum() {
|
|
ensure_sums || return 2
|
|
_want=$(sums_hash "$2") || return 1
|
|
[ -n "$_want" ] || return 1
|
|
_got=$(sha256_of "$1") || return 2
|
|
[ "$_got" = "$_want" ] || { printf 'expected %s\n got %s' "$_want" "$_got" >&2; return 1; }
|
|
return 0
|
|
}
|
|
|
|
# --------------------------------------------------------------------------
|
|
# binary inspection
|
|
#
|
|
# ELF: byte 4 is the class (1=32-bit, 2=64-bit), bytes 18-19 the machine.
|
|
# Mach-O: read the arch with `file`, which macOS always has.
|
|
# `od` is used rather than `file` on Linux because `file` is NOT installed on a
|
|
# stock RetroPie or Lakka image, while coreutils always is.
|
|
# --------------------------------------------------------------------------
|
|
elf_class() { od -An -t u1 -j 4 -N 1 "$1" 2>/dev/null | tr -d ' '; }
|
|
elf_machine() { od -An -t u1 -j 18 -N 1 "$1" 2>/dev/null | tr -d ' '; }
|
|
|
|
# Prints e.g. "64 aarch64" / "32 arm" / "64 x86_64" / "32 i386", or "" if unreadable.
|
|
binary_arch() {
|
|
_f="$1"
|
|
[ -f "$_f" ] || { printf ''; return; }
|
|
case "$(uname -s)" in
|
|
Darwin)
|
|
# macOS frontends are usually UNIVERSAL binaries carrying both slices, so
|
|
# "does it contain arm64" is the wrong question -- RetroArch.app contains
|
|
# both, and on an Intel Mac the x86_64 slice is the one that runs. Which
|
|
# slice runs is the host architecture, so when there is more than one,
|
|
# that is what decides.
|
|
_archs=""
|
|
if command -v lipo >/dev/null 2>&1; then
|
|
_archs=$(lipo -archs "$_f" 2>/dev/null || true)
|
|
fi
|
|
if [ -z "$_archs" ]; then
|
|
# No developer tools: parse `file`, which lists every slice.
|
|
_fo=$(file -b "$_f" 2>/dev/null || true)
|
|
case "$_fo" in *arm64*) _archs="arm64" ;; esac
|
|
case "$_fo" in *x86_64*) _archs="$_archs x86_64" ;; esac
|
|
fi
|
|
_host=$(uname -m)
|
|
# Substring match rather than `for _a in $_archs`: zsh does NOT word-split
|
|
# unquoted variables, so that loop sees "x86_64 arm64" as ONE item, never
|
|
# matches, and silently falls through to the first slice -- picking the
|
|
# x86_64 core on an Apple Silicon Mac. zsh is macOS's default shell, so
|
|
# this is the likely invocation, not an exotic one. `case` is split-free
|
|
# and behaves identically in every shell.
|
|
case " $_archs " in
|
|
*" $_host "*) _pick="$_host" ;;
|
|
*) _pick=${_archs%% *} ;;
|
|
esac
|
|
case "$_pick" in
|
|
arm64) printf '64 aarch64' ;;
|
|
x86_64) printf '64 x86_64' ;;
|
|
*) printf '' ;;
|
|
esac
|
|
;;
|
|
*)
|
|
_c=$(elf_class "$_f"); _m=$(elf_machine "$_f")
|
|
case "$_c" in 1) _bits=32 ;; 2) _bits=64 ;; *) printf ''; return ;; esac
|
|
# EM_386=3 EM_ARM=40 EM_X86_64=62 EM_AARCH64=183
|
|
case "$_m" in
|
|
3) printf '%s i386' "$_bits" ;;
|
|
40) printf '%s arm' "$_bits" ;;
|
|
62) printf '%s x86_64' "$_bits" ;;
|
|
183) printf '%s aarch64' "$_bits" ;;
|
|
*) printf '' ;;
|
|
esac
|
|
;;
|
|
esac
|
|
}
|
|
|
|
# ==========================================================================
|
|
# THE CORE
|
|
#
|
|
# Runs in a subshell (see main), so a die here ends only this part and `both`
|
|
# can still go on to the app. Shared results go through files in $WORK.
|
|
# ==========================================================================
|
|
CANDIDATES="" # newline-separated: <label>|<retroarch-binary>|<core-dir>
|
|
|
|
cfg_value() {
|
|
# cfg_value <file> <key> -- strips quotes and expands a leading ~
|
|
_v=$(sed -n "s/^[[:space:]]*$2[[:space:]]*=[[:space:]]*//p" "$1" 2>/dev/null | head -1 | tr -d '"')
|
|
case "$_v" in "~"*) _v="$HOME${_v#\~}" ;; esac
|
|
printf '%s' "$_v"
|
|
}
|
|
|
|
add_candidate() {
|
|
# add_candidate <label> <retroarch-bin> <core-dir>
|
|
[ -n "$3" ] || return 0
|
|
case "$CANDIDATES" in *"|$3"*) return 0 ;; esac # already have this core dir
|
|
CANDIDATES="$CANDIDATES$1|$2|$3
|
|
"
|
|
}
|
|
|
|
find_retroarch() {
|
|
if [ -n "${VJ_INSTALL_RETROARCH:-}" ]; then
|
|
[ -x "$VJ_INSTALL_RETROARCH" ] && printf '%s' "$VJ_INSTALL_RETROARCH"
|
|
return 0
|
|
fi
|
|
for _c in /opt/retropie/emulators/retroarch/bin/retroarch \
|
|
/usr/bin/retroarch /usr/local/bin/retroarch /bin/retroarch \
|
|
"$HOME/.local/bin/retroarch" \
|
|
/Applications/RetroArch.app/Contents/MacOS/RetroArch \
|
|
"$HOME/Applications/RetroArch.app/Contents/MacOS/RetroArch"; do
|
|
[ -x "$_c" ] && { printf '%s' "$_c"; return; }
|
|
done
|
|
command -v retroarch 2>/dev/null || printf ''
|
|
}
|
|
|
|
discover_frontends() {
|
|
RA_BIN=$(find_retroarch)
|
|
|
|
for _cfg in \
|
|
"${XDG_CONFIG_HOME:-$HOME/.config}/retroarch/retroarch.cfg" \
|
|
"$HOME/.config/retroarch/retroarch.cfg" \
|
|
"$HOME/Library/Application Support/RetroArch/config/retroarch.cfg" \
|
|
"$HOME/.var/app/org.libretro.RetroArch/config/retroarch/retroarch.cfg" \
|
|
"$HOME/snap/retroarch/current/.config/retroarch/retroarch.cfg" \
|
|
/opt/retropie/configs/all/retroarch.cfg \
|
|
/etc/retroarch.cfg \
|
|
/storage/.config/retroarch/retroarch.cfg \
|
|
/userdata/system/configs/retroarch/retroarch.cfg \
|
|
/recalbox/share/system/configs/retroarch/retroarch.cfg ; do
|
|
[ -r "$_cfg" ] || continue
|
|
_dir=$(cfg_value "$_cfg" libretro_directory)
|
|
[ -n "$_dir" ] && [ -d "$_dir" ] || continue
|
|
add_candidate "RetroArch ($_cfg)" "$RA_BIN" "$_dir"
|
|
done
|
|
|
|
# RetroPie keeps each core in its own directory, named by package, and that is
|
|
# what its emulators.cfg points at -- not libretro_directory.
|
|
if [ -r /opt/retropie/configs/atarijaguar/emulators.cfg ]; then
|
|
_p=$(sed -n 's/.*-L[[:space:]]\{1,\}\([^[:space:]]*virtualjaguar[^[:space:]]*\.so\).*/\1/p' \
|
|
/opt/retropie/configs/atarijaguar/emulators.cfg 2>/dev/null | head -1)
|
|
[ -n "$_p" ] && add_candidate "RetroPie (lr-virtualjaguar)" "$RA_BIN" "$(dirname "$_p")"
|
|
fi
|
|
[ -d /opt/retropie/libretrocores/lr-virtualjaguar ] && \
|
|
add_candidate "RetroPie (lr-virtualjaguar)" "$RA_BIN" /opt/retropie/libretrocores/lr-virtualjaguar
|
|
|
|
# Distro core directories, only when they already contain cores.
|
|
for _d in /usr/lib/libretro /usr/lib64/libretro \
|
|
/usr/lib/x86_64-linux-gnu/libretro /usr/lib/aarch64-linux-gnu/libretro \
|
|
/usr/lib/arm-linux-gnueabihf/libretro /usr/local/lib/libretro ; do
|
|
[ -d "$_d" ] || continue
|
|
set -- "$_d"/*_libretro.so
|
|
[ -e "$1" ] || continue
|
|
add_candidate "System cores ($_d)" "$RA_BIN" "$_d"
|
|
done
|
|
|
|
if [ -n "$DEST" ]; then
|
|
CANDIDATES="Chosen with --dest|$RA_BIN|$DEST
|
|
"
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
core_install() {
|
|
# ------------------------------------------------------------------------
|
|
# 1. find frontends
|
|
#
|
|
# The core directory is read from RetroArch's OWN config (libretro_directory)
|
|
# rather than a hardcoded per-distro table. That is authoritative on every
|
|
# distribution, including the ones with a read-only root where a guessed path
|
|
# would be wrong (Lakka, Batocera, EmuELEC, Recalbox).
|
|
# ------------------------------------------------------------------------
|
|
step "Looking for RetroArch and its core directory"
|
|
discover_frontends
|
|
|
|
_n=$(printf '%s' "$CANDIDATES" | grep -c . || true)
|
|
if [ "${_n:-0}" -eq 0 ]; then
|
|
if [ "$CORE_SOFT" -eq 1 ]; then
|
|
note "no RetroArch core directory found; skipping the core (the app is still updated)."
|
|
return 0
|
|
fi
|
|
warn "no RetroArch core directory found automatically."
|
|
say ""
|
|
say " If RetroArch is installed, its core folder is shown under"
|
|
say " ${B}Settings -> Directory -> Cores${R} in the RetroArch menu."
|
|
say " Re-run with: $SELF --dest /that/path"
|
|
say ""
|
|
[ "$INTERACTIVE" -eq 1 ] || die "nothing to install into."
|
|
_manual=$(ask " Core directory" "")
|
|
[ -n "$_manual" ] || die "nothing to install into."
|
|
[ -d "$_manual" ] || die "not a directory: $_manual"
|
|
CANDIDATES="Entered by hand|$RA_BIN|$_manual
|
|
"
|
|
_n=1
|
|
fi
|
|
|
|
# ------------------------------------------------------------------------
|
|
# 2. pick one
|
|
# ------------------------------------------------------------------------
|
|
if [ "$LIST_ONLY" -eq 1 ]; then
|
|
step "Frontends found"
|
|
printf '%s' "$CANDIDATES" | while IFS='|' read -r _l _b _d; do
|
|
[ -n "$_l" ] || continue
|
|
say " $_l"
|
|
say " cores: $_d"
|
|
say " retroarch: ${_b:-(not found)}"
|
|
done
|
|
say ""
|
|
say "Install into one with: $SELF --dest <core dir>"
|
|
return 0
|
|
fi
|
|
|
|
if [ "$_n" -eq 1 ]; then
|
|
CHOICE=$(printf '%s' "$CANDIDATES" | head -1)
|
|
ok "$(printf '%s' "$CHOICE" | cut -d'|' -f1)"
|
|
else
|
|
step "More than one frontend found -- pick one"
|
|
_i=0
|
|
printf '%s' "$CANDIDATES" | while IFS='|' read -r _l _b _d; do
|
|
[ -n "$_l" ] || continue
|
|
_i=$((_i + 1)); say " $_i) $_l"; say " $D$_d$R"
|
|
done
|
|
say ""
|
|
_sel=$(ask " Number" "1")
|
|
CHOICE=$(printf '%s' "$CANDIDATES" | sed -n "${_sel}p")
|
|
[ -n "$CHOICE" ] || die "no such choice: $_sel"
|
|
ok "$(printf '%s' "$CHOICE" | cut -d'|' -f1)"
|
|
fi
|
|
|
|
FE_LABEL=$(printf '%s' "$CHOICE" | cut -d'|' -f1)
|
|
RA_BIN=$(printf '%s' "$CHOICE" | cut -d'|' -f2)
|
|
CORE_DIR=$(printf '%s' "$CHOICE" | cut -d'|' -f3)
|
|
note "cores -> $CORE_DIR"
|
|
|
|
[ -d "$CORE_DIR" ] || die "core directory does not exist: $CORE_DIR"
|
|
if [ ! -w "$CORE_DIR" ] && [ "$(id -u)" -ne 0 ]; then
|
|
case "$(uname -s)" in
|
|
Linux)
|
|
if ! command -v sudo >/dev/null 2>&1; then
|
|
die "$CORE_DIR is not writable and sudo is unavailable.
|
|
|
|
Distributions like Lakka, Batocera, EmuELEC and Recalbox mount the root
|
|
filesystem read-only and cores cannot be replaced in place. Use that
|
|
distribution's own core-update mechanism instead."
|
|
fi
|
|
;;
|
|
esac
|
|
fi
|
|
printf '%s' "$CORE_DIR" > "$WORK/core_dir"
|
|
|
|
# ------------------------------------------------------------------------
|
|
# 3. word size and machine -- from the frontend binary
|
|
# ------------------------------------------------------------------------
|
|
step "Working out which build you need"
|
|
|
|
ARCHINFO=""
|
|
[ -n "$RA_BIN" ] && ARCHINFO=$(binary_arch "$RA_BIN")
|
|
|
|
if [ -z "$ARCHINFO" ]; then
|
|
# Fall back to an existing core in the same directory -- still the frontend's
|
|
# own ABI, which is the thing that has to match.
|
|
for _c in "$CORE_DIR"/*_libretro.so "$CORE_DIR"/*_libretro.dylib; do
|
|
[ -f "$_c" ] || continue
|
|
ARCHINFO=$(binary_arch "$_c"); [ -n "$ARCHINFO" ] && { note "read from $(basename "$_c")"; break; }
|
|
done
|
|
fi
|
|
[ -n "$ARCHINFO" ] || die "could not determine the frontend's architecture.
|
|
Neither the RetroArch binary nor an existing core could be read."
|
|
|
|
BITS=$(printf '%s' "$ARCHINFO" | cut -d' ' -f1)
|
|
MACH=$(printf '%s' "$ARCHINFO" | cut -d' ' -f2)
|
|
ok "frontend is ${BITS}-bit $MACH"
|
|
|
|
_kern=$(uname -m)
|
|
if [ "$BITS" = 32 ] && [ "$_kern" = "aarch64" ]; then
|
|
warn "kernel says '$_kern' but the frontend is 32-bit: 64-bit kernel, 32-bit userland."
|
|
warn "Using the 32-bit core. This is the case picking by \`uname -m\` gets wrong."
|
|
fi
|
|
|
|
# board, for the Pi-tuned builds
|
|
MODEL=""
|
|
[ -r /proc/device-tree/model ] && MODEL=$(tr -d '\0' < /proc/device-tree/model 2>/dev/null)
|
|
[ -n "$MODEL" ] || MODEL=$(sed -n 's/^Model[[:space:]]*:[[:space:]]*//p' /proc/cpuinfo 2>/dev/null | head -1)
|
|
|
|
OS=$(uname -s)
|
|
ASSET=""
|
|
case "$OS" in
|
|
Darwin)
|
|
case "$MACH" in
|
|
aarch64) ASSET="$CORE_NAME-macos-arm64.dylib" ;;
|
|
x86_64) ASSET="$CORE_NAME-macos-x86_64.dylib" ;;
|
|
esac
|
|
;;
|
|
Linux)
|
|
case "$MODEL" in
|
|
*"Raspberry Pi 5"*) PI=rpi5; SUF=cortex-a76 ;;
|
|
*"Raspberry Pi 4"*|*"Pi 400"*) PI=rpi4; SUF=cortex-a72 ;;
|
|
*"Compute Module 4"*) PI=rpi4; SUF=cortex-a72 ;;
|
|
*"Raspberry Pi 3"*|*"Pi Zero 2"*) PI=rpi3; SUF=cortex-a53 ;;
|
|
*"Compute Module 3"*) PI=rpi3; SUF=cortex-a53 ;;
|
|
*"Raspberry Pi 2"*) PI=rpi2; SUF=cortex-a7 ;;
|
|
*"Raspberry Pi"*) PI=rpi1; SUF=armv6 ;;
|
|
*) PI=""; SUF="" ;;
|
|
esac
|
|
if [ -n "$PI" ]; then
|
|
[ -n "$MODEL" ] && ok "board: $MODEL"
|
|
case "$BITS:$PI" in
|
|
64:rpi1|64:rpi2) ASSET="$CORE_NAME-linux-aarch64.so" ;; # no 64-bit build for these parts
|
|
64:*) ASSET="$CORE_NAME-linux-${PI}_64-${SUF}.so" ;;
|
|
32:*) ASSET="$CORE_NAME-linux-${PI}-${SUF}.so" ;;
|
|
esac
|
|
else
|
|
case "$BITS $MACH" in
|
|
"64 x86_64") ASSET="$CORE_NAME-linux-x86_64.so" ;;
|
|
"32 i386") ASSET="$CORE_NAME-linux-i686.so" ;;
|
|
"64 aarch64") ASSET="$CORE_NAME-linux-aarch64.so" ;;
|
|
"32 arm") ASSET="$CORE_NAME-linux-rpi2-cortex-a7.so"
|
|
warn "generic 32-bit ARM: using the ARMv7 build (rpi2/cortex-a7)." ;;
|
|
esac
|
|
fi
|
|
;;
|
|
*)
|
|
die "unsupported OS '$OS'. This installer handles Linux and macOS.
|
|
Windows: use install.ps1 (see https://github.com/$REPO#install)."
|
|
;;
|
|
esac
|
|
[ -n "$ASSET" ] || die "no build matches ${BITS}-bit $MACH on $OS.
|
|
Please open an issue at https://github.com/$REPO/issues with:
|
|
os=$OS mach=$MACH bits=$BITS model=${MODEL:-n/a} uname=$_kern"
|
|
ok "build: $ASSET"
|
|
|
|
URL=$(release_url "$ASSET")
|
|
ok "channel: $CHANNEL"
|
|
|
|
# ------------------------------------------------------------------------
|
|
# 5. download and check BEFORE touching anything installed
|
|
# ------------------------------------------------------------------------
|
|
case "$ASSET" in *.dylib) EXT=dylib ;; *) EXT=so ;; esac
|
|
CORE_PATH="$CORE_DIR/$CORE_NAME.$EXT"
|
|
|
|
step "Downloading"
|
|
note "$URL"
|
|
|
|
mkdir -p "$WORK/core"
|
|
curl -fsSL --retry 3 -o "$WORK/core/core" "$URL" || die "download failed.
|
|
|
|
That release may not ship a build named '$ASSET'.
|
|
What it does ship: https://github.com/$REPO/releases"
|
|
|
|
SIZE=$(wc -c < "$WORK/core/core" | tr -d ' ')
|
|
[ "${SIZE:-0}" -gt 100000 ] || die "downloaded $SIZE bytes -- that is not a core."
|
|
ok "$((SIZE / 1024)) KB"
|
|
|
|
step "Checking it"
|
|
_vout=$(verify_sum "$WORK/core/core" "$ASSET" 2>&1) && _vrc=0 || _vrc=$?
|
|
case "$_vrc" in
|
|
0) ok "SHA-256 matches SHA256SUMS.txt" ;;
|
|
1) die "SHA-256 mismatch for $ASSET -- nothing was changed.
|
|
$_vout
|
|
Retry in a minute (a nightly may have been replaced mid-download); if it
|
|
persists, report it at https://github.com/$REPO/issues" ;;
|
|
*) warn "could not check SHA-256 (no SHA256SUMS.txt for this channel, or no hashing tool)." ;;
|
|
esac
|
|
|
|
DL=$(binary_arch "$WORK/core/core")
|
|
[ -n "$DL" ] || die "the downloaded file is not a shared library this script can read."
|
|
[ "$DL" = "$ARCHINFO" ] || die "architecture mismatch -- nothing was changed.
|
|
frontend: $ARCHINFO
|
|
downloaded: $DL
|
|
Please report at https://github.com/$REPO/issues with:
|
|
asset=$ASSET model=${MODEL:-n/a} uname=$_kern"
|
|
ok "matches your frontend ($ARCHINFO)"
|
|
|
|
if [ "$DRY_RUN" -eq 1 ]; then
|
|
step "--dry-run: nothing was changed (core)"
|
|
say " would install $ASSET"
|
|
say " into $CORE_PATH"
|
|
return 0
|
|
fi
|
|
|
|
# ------------------------------------------------------------------------
|
|
# 6. install
|
|
# ------------------------------------------------------------------------
|
|
SUDO=""
|
|
[ "$(id -u)" -eq 0 ] || { [ -w "$CORE_DIR" ] || SUDO="sudo"; }
|
|
|
|
if [ -f "$CORE_PATH" ]; then
|
|
confirm " Replace the core already at $CORE_PATH?" || die "cancelled -- nothing changed."
|
|
fi
|
|
|
|
step "Installing the core"
|
|
BACKUP=""
|
|
if [ -f "$CORE_PATH" ]; then
|
|
BACKUP="$CORE_PATH.bak-$(date +%Y%m%d-%H%M%S)"
|
|
as_root cp -p "$CORE_PATH" "$BACKUP" || die "could not back up the existing core."
|
|
ok "backed up -> $(basename "$BACKUP")"
|
|
fi
|
|
as_root mkdir -p "$CORE_DIR"
|
|
as_root cp "$WORK/core/core" "$CORE_PATH" || die "could not write $CORE_PATH"
|
|
as_root chmod 0644 "$CORE_PATH" 2>/dev/null || true
|
|
ok "installed -> $CORE_PATH"
|
|
|
|
if [ -n "$RA_BIN" ] && [ -x "$RA_BIN" ]; then
|
|
step "Asking RetroArch to load it"
|
|
if _out=$("$RA_BIN" -L "$CORE_PATH" --version 2>&1); then
|
|
ok "loaded"
|
|
printf '%s\n' "$_out" | sed -n '1,2p' | sed 's/^/ /'
|
|
else
|
|
warn "RetroArch could not load it. Over SSH with no display this check is"
|
|
warn "not conclusive, but if games fail too, restore the backup:"
|
|
[ -n "$BACKUP" ] && say " sudo cp -p '$BACKUP' '$CORE_PATH'"
|
|
printf '%s\n' "$_out" | sed -n '1,4p' | sed 's/^/ /'
|
|
fi
|
|
fi
|
|
|
|
step "Core installed"
|
|
say " frontend: $FE_LABEL"
|
|
say " core: $CORE_PATH"
|
|
say " channel: $CHANNEL"
|
|
[ -n "$BACKUP" ] && say " undo: ${SUDO:+sudo }cp -p '$BACKUP' '$CORE_PATH'"
|
|
say ""
|
|
say " Put Jaguar ROMs where your frontend scans for them, then restart it so"
|
|
say " the new core is picked up."
|
|
return 0
|
|
}
|
|
|
|
# ==========================================================================
|
|
# THE APP
|
|
# ==========================================================================
|
|
INST_KIND=""; INST_PATH=""; INST_VER=""
|
|
|
|
if [ "$(uname -s)" = Darwin ]; then
|
|
RCPT_DIR="$HOME/Library/Application Support/VirtualJaguar"
|
|
else
|
|
RCPT_DIR="${XDG_DATA_HOME:-$HOME/.local/share}/VirtualJaguar"
|
|
fi
|
|
RCPT="$RCPT_DIR/install-receipt"
|
|
|
|
# The receipt is a CACHE (channel, asset hash), never the source of truth for
|
|
# whether the app is installed: a DMG drag-install or a hand-run .deb has none.
|
|
rcpt_get() { [ -r "$RCPT" ] && sed -n "s/^$1=//p" "$RCPT" 2>/dev/null | head -1; return 0; }
|
|
|
|
rcpt_write() {
|
|
# rcpt_write <kind> <path> <version> <asset> <sha256>
|
|
mkdir -p "$RCPT_DIR" 2>/dev/null || return 0
|
|
{
|
|
printf 'channel=%s\n' "$CHANNEL"
|
|
printf 'kind=%s\n' "$1"
|
|
printf 'path=%s\n' "$2"
|
|
printf 'version=%s\n' "$3"
|
|
printf 'asset=%s\n' "$4"
|
|
printf 'sha256=%s\n' "$5"
|
|
printf 'installed=%s\n' "$(date -u +%Y-%m-%dT%H:%M:%SZ)"
|
|
} > "$RCPT" 2>/dev/null || true
|
|
}
|
|
|
|
plist_version() {
|
|
# plist_version <Foo.app>
|
|
_pl="$1/Contents/Info"
|
|
_v=$(defaults read "$_pl" CFBundleShortVersionString 2>/dev/null || true)
|
|
if [ -z "$_v" ]; then
|
|
_v=$(sed -n '/CFBundleShortVersionString/{n;s/.*<string>\(.*\)<\/string>.*/\1/p;}' "$_pl.plist" 2>/dev/null | head -1)
|
|
fi
|
|
printf '%s' "$_v"
|
|
}
|
|
|
|
app_probe_mac() {
|
|
[ -n "$INST_PATH" ] && return 0
|
|
[ -d "$1/$MAC_APP_NAME" ] || return 0
|
|
INST_KIND=app; INST_PATH="$1/$MAC_APP_NAME"; INST_VER=$(plist_version "$INST_PATH")
|
|
return 0
|
|
}
|
|
|
|
app_probe_appimage() {
|
|
_ai="${APP_DEST:-$HOME/.local/bin}/$APPIMAGE_NAME"
|
|
[ -f "$_ai" ] || return 0
|
|
INST_KIND=appimage; INST_PATH="$_ai"
|
|
# An AppImage has no readable version without running it (and running it needs
|
|
# FUSE), so the version comes from the receipt, and only if it describes THIS file.
|
|
if [ "$(rcpt_get path)" = "$_ai" ]; then INST_VER=$(rcpt_get version); fi
|
|
return 0
|
|
}
|
|
|
|
app_probe_deb() {
|
|
command -v dpkg-query >/dev/null 2>&1 || return 0
|
|
# shellcheck disable=SC2016 # ${Status} is dpkg-query's field syntax, not ours
|
|
_st=$(dpkg-query -W -f='${Status}|${Version}' "$DEB_PKG" 2>/dev/null || true)
|
|
case "$_st" in
|
|
"install ok installed|"*) INST_KIND=deb; INST_PATH="dpkg:$DEB_PKG"; INST_VER=${_st#*|} ;;
|
|
esac
|
|
return 0
|
|
}
|
|
|
|
# Look for an installed app. Sets INST_KIND / INST_PATH / INST_VER (empty = none).
|
|
app_detect() {
|
|
INST_KIND=""; INST_PATH=""; INST_VER=""
|
|
case "$(uname -s)" in
|
|
Darwin)
|
|
if [ -n "$APP_DEST" ]; then app_probe_mac "$APP_DEST"
|
|
else app_probe_mac /Applications; app_probe_mac "$HOME/Applications"; fi
|
|
;;
|
|
Linux)
|
|
case "$APP_FORMAT" in
|
|
deb) app_probe_deb ;;
|
|
appimage) app_probe_appimage ;;
|
|
*) app_probe_appimage; [ -n "$INST_KIND" ] || app_probe_deb ;;
|
|
esac
|
|
;;
|
|
esac
|
|
# Nightlies and PR builds report the PROJECT version (4.0.0) in Info.plist / dpkg, the
|
|
# same string a release uses, so that string cannot tell them apart. If our receipt
|
|
# says this install came from a nightly, it is "nightly" whatever the bundle claims.
|
|
if [ -n "$INST_KIND" ] && [ "$(rcpt_get path)" = "$INST_PATH" ] && [ "$(rcpt_get version)" = nightly ]; then
|
|
INST_VER=nightly
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
# Is the app something THIS script installed (so unattended runs may update it)?
|
|
app_has_receipt() { [ -r "$RCPT" ] && [ -n "$INST_KIND" ] && [ "$(rcpt_get kind)" = "$INST_KIND" ]; }
|
|
|
|
# Strip a Debian revision / leading v so "4.0.0-1" and "v4.0.0" compare to "4.0.0".
|
|
norm_ver() { _x=${1#v}; printf '%s' "${_x%%-*}"; }
|
|
|
|
app_status() {
|
|
step "Virtual Jaguar app"
|
|
app_detect
|
|
if [ -z "$INST_KIND" ]; then
|
|
note "not installed"
|
|
else
|
|
ok "installed: $INST_PATH version: ${INST_VER:-unknown}"
|
|
[ -r "$RCPT" ] && note "channel last installed from: $(rcpt_get channel)"
|
|
fi
|
|
}
|
|
|
|
# Maps the userland (not the kernel) to the app's Linux arch names.
|
|
linux_app_arch() {
|
|
_ua=$(binary_arch /bin/sh)
|
|
case "$_ua" in
|
|
"64 x86_64") printf 'x86_64' ;;
|
|
"64 aarch64") printf 'aarch64' ;;
|
|
"") # unreadable: fall back to the kernel, which is right on every
|
|
# 64-bit userland and merely optimistic on a 32-bit one
|
|
case "$(uname -m)" in
|
|
x86_64|amd64) printf 'x86_64' ;;
|
|
aarch64|arm64) printf 'aarch64' ;;
|
|
esac ;;
|
|
esac
|
|
return 0
|
|
}
|
|
|
|
app_no_build() {
|
|
# app_no_build <why> -- the graceful "nothing to install" exit
|
|
say ""
|
|
say " ${B}No app build is published for this channel yet.${R}"
|
|
say " $1"
|
|
say " The standalone app ships from v4.0. To get the core now: $SELF --core"
|
|
[ "$CHANNEL" = nightly ] || say " Try the nightly channel: $SELF --app --channel nightly"
|
|
return 3
|
|
}
|
|
|
|
app_install() {
|
|
step "Virtual Jaguar app"
|
|
OS=$(uname -s)
|
|
case "$OS" in
|
|
Darwin)
|
|
FORMAT=${APP_FORMAT:-zip}
|
|
case "$FORMAT" in zip|dmg) ;; *) die "--app-format $FORMAT does not apply on macOS (use zip or dmg)." ;; esac
|
|
PRE="VirtualJaguar-"; SUF="-macos-universal.$FORMAT"
|
|
;;
|
|
Linux)
|
|
app_detect
|
|
FORMAT=$APP_FORMAT
|
|
if [ -z "$FORMAT" ]; then
|
|
if [ "$INST_KIND" = deb ]; then FORMAT=deb; else FORMAT=appimage; fi
|
|
fi
|
|
case "$FORMAT" in appimage|deb) ;; *) die "--app-format $FORMAT does not apply on Linux (use appimage or deb)." ;; esac
|
|
LARCH=$(linux_app_arch)
|
|
if [ -z "$LARCH" ]; then
|
|
app_no_build "No app build for this machine: the app is x86_64 and aarch64 (64-bit) only, and this userland is $(binary_arch /bin/sh)."
|
|
return 3
|
|
fi
|
|
if [ "$LARCH" != "$(uname -m | sed 's/amd64/x86_64/;s/arm64/aarch64/')" ]; then
|
|
warn "kernel says '$(uname -m)' but the userland is $LARCH: matching the userland."
|
|
fi
|
|
if [ "$FORMAT" = deb ]; then
|
|
case "$LARCH" in x86_64) DARCH=amd64 ;; *) DARCH=arm64 ;; esac
|
|
if command -v dpkg >/dev/null 2>&1 && [ "$(dpkg --print-architecture 2>/dev/null || echo "$DARCH")" != "$DARCH" ]; then
|
|
die "dpkg is configured for $(dpkg --print-architecture), not $DARCH; the .deb would not install."
|
|
fi
|
|
PRE="virtualjaguar_"; SUF="_$DARCH.deb"
|
|
else
|
|
PRE="VirtualJaguar-"; SUF="-linux-$LARCH.AppImage"
|
|
fi
|
|
;;
|
|
MINGW*|MSYS*|CYGWIN*)
|
|
die "this is a Windows shell. Use install.ps1 in PowerShell instead:
|
|
irm https://raw.githubusercontent.com/$REPO/develop/tools/install.ps1 | iex" ;;
|
|
*) die "unsupported OS '$OS' for the app (macOS and Linux; Windows is install.ps1)." ;;
|
|
esac
|
|
|
|
app_detect
|
|
if [ -n "$INST_KIND" ]; then
|
|
ok "installed now: $INST_PATH version: ${INST_VER:-unknown}"
|
|
else
|
|
note "no existing app install found"
|
|
fi
|
|
|
|
if ! ensure_sums; then
|
|
app_no_build "Could not read $(release_url SHA256SUMS.txt) -- that release does not exist (yet), or you are offline."
|
|
return 3
|
|
fi
|
|
AASSET=$(sums_find "$PRE" "$SUF") || {
|
|
app_no_build "The '$CHANNEL' release has no file named ${PRE}*${SUF}."
|
|
return 3
|
|
}
|
|
AHASH=$(sums_hash "$AASSET") || die "SHA256SUMS.txt is malformed (no hash for $AASSET)."
|
|
case "$FORMAT" in
|
|
deb) AVER=${AASSET#virtualjaguar_}; AVER=${AVER%_*} ;;
|
|
*) AVER=${AASSET#VirtualJaguar-}; AVER=${AVER%%-macos-*}; AVER=${AVER%%-linux-*} ;;
|
|
esac
|
|
ok "channel $CHANNEL ships $AASSET (version $AVER)"
|
|
|
|
# --- update decision ------------------------------------------------------
|
|
ACTION=install
|
|
if [ -n "$INST_KIND" ]; then
|
|
ACTION=update
|
|
if [ "$(rcpt_get path)" = "$INST_PATH" ] && [ "$(rcpt_get sha256)" = "$AHASH" ]; then
|
|
ACTION=current
|
|
elif [ "$AVER" != nightly ] && [ -n "$INST_VER" ] && [ "$(norm_ver "$INST_VER")" = "$(norm_ver "$AVER")" ]; then
|
|
ACTION=current
|
|
fi
|
|
[ "$FORCE" -eq 1 ] && [ "$ACTION" = current ] && ACTION=reinstall
|
|
fi
|
|
|
|
# --- where it goes --------------------------------------------------------
|
|
case "$FORMAT" in
|
|
zip|dmg)
|
|
if [ -n "$APP_DEST" ]; then ADIR=$APP_DEST
|
|
elif [ -n "$INST_PATH" ]; then ADIR=$(dirname "$INST_PATH")
|
|
elif [ -w /Applications ]; then ADIR=/Applications
|
|
else ADIR="$HOME/Applications"; fi
|
|
ATARGET="$ADIR/$MAC_APP_NAME"
|
|
;;
|
|
appimage)
|
|
ADIR=${APP_DEST:-$HOME/.local/bin}
|
|
ATARGET="$ADIR/$APPIMAGE_NAME"
|
|
;;
|
|
deb) ATARGET="dpkg:$DEB_PKG" ;;
|
|
esac
|
|
|
|
case "$ACTION" in
|
|
current) ok "already up to date ($AVER); nothing to do. --force reinstalls." ;;
|
|
update) ok "update: ${INST_VER:-unknown} -> $AVER" ;;
|
|
install) ok "fresh install" ;;
|
|
reinstall) ok "reinstall of $AVER (--force)" ;;
|
|
esac
|
|
|
|
if [ "$DRY_RUN" -eq 1 ]; then
|
|
step "--dry-run: nothing was changed (app)"
|
|
if [ "$ACTION" = current ]; then
|
|
say " app is up to date: $AASSET"
|
|
else
|
|
say " would $ACTION $AASSET (sha256 ${AHASH%"${AHASH#????????????}"}...)"
|
|
say " from $(release_url "$AASSET")"
|
|
say " into $ATARGET"
|
|
if [ "$FORMAT" = deb ]; then say " using apt-get install / dpkg -i (root needed)"; fi
|
|
fi
|
|
return 0
|
|
fi
|
|
[ "$ACTION" = current ] && return 0
|
|
|
|
# --- download and verify BEFORE touching anything -------------------------
|
|
mkdir -p "$WORK/app"
|
|
note "$(release_url "$AASSET")"
|
|
curl -fsSL --retry 3 -o "$WORK/app/$AASSET" "$(release_url "$AASSET")" || die "download of $AASSET failed."
|
|
_vout=$(verify_sum "$WORK/app/$AASSET" "$AASSET" 2>&1) && _vrc=0 || _vrc=$?
|
|
case "$_vrc" in
|
|
0) ok "SHA-256 matches SHA256SUMS.txt" ;;
|
|
1) die "SHA-256 mismatch for $AASSET -- nothing was changed.
|
|
$_vout" ;;
|
|
*) die "could not verify $AASSET (no sha256sum / shasum / openssl on this machine). Nothing was installed." ;;
|
|
esac
|
|
|
|
if [ "$ACTION" != install ]; then
|
|
confirm " Replace the app at $ATARGET?" || die "cancelled -- nothing changed."
|
|
fi
|
|
|
|
case "$FORMAT" in
|
|
zip|dmg) app_install_mac ;;
|
|
appimage) app_install_appimage ;;
|
|
deb) app_install_deb ;;
|
|
esac
|
|
rcpt_write "$INST_KIND_NEW" "$ATARGET" "$AVER" "$AASSET" "$AHASH"
|
|
|
|
step "App installed"
|
|
say " app: $ATARGET"
|
|
say " version: $AVER channel: $CHANNEL"
|
|
[ -n "${APP_BACKUP:-}" ] && say " undo: replace it with $APP_BACKUP"
|
|
return 0
|
|
}
|
|
|
|
# macOS: extract to scratch, move the old bundle aside, move the new one in.
|
|
# NEVER copy over an existing bundle: that merges, leaves stale files behind and
|
|
# breaks the code signature.
|
|
app_install_mac() {
|
|
step "Installing the app"
|
|
XD="$WORK/app/x"; mkdir -p "$XD"
|
|
if [ "$FORMAT" = dmg ]; then
|
|
MNT="$WORK/app/mnt"; mkdir -p "$MNT"
|
|
hdiutil attach -nobrowse -readonly -quiet -mountpoint "$MNT" "$WORK/app/$AASSET" >/dev/null \
|
|
|| die "could not mount the DMG."
|
|
_src=""
|
|
for _a in "$MNT"/*.app; do [ -d "$_a" ] && { _src=$_a; break; }; done
|
|
if [ -n "$_src" ]; then ditto "$_src" "$XD/$(basename "$_src")" || { hdiutil detach -quiet "$MNT" || true; die "could not copy out of the DMG."; }; fi
|
|
hdiutil detach -quiet "$MNT" >/dev/null 2>&1 || hdiutil detach -force -quiet "$MNT" >/dev/null 2>&1 || true
|
|
else
|
|
if command -v ditto >/dev/null 2>&1; then ditto -x -k "$WORK/app/$AASSET" "$XD" || die "could not unpack the zip."
|
|
else unzip -q "$WORK/app/$AASSET" -d "$XD" || die "could not unpack the zip."; fi
|
|
fi
|
|
NEWAPP=""
|
|
[ -d "$XD/$MAC_APP_NAME" ] && NEWAPP="$XD/$MAC_APP_NAME"
|
|
if [ -z "$NEWAPP" ]; then
|
|
for _a in "$XD"/*.app "$XD"/*/*.app; do [ -d "$_a" ] && { NEWAPP=$_a; break; }; done
|
|
fi
|
|
[ -n "$NEWAPP" ] || die "no .app inside $AASSET."
|
|
|
|
if [ ! -d "$ADIR" ]; then mkdir -p "$ADIR" || die "could not create $ADIR"; fi
|
|
[ -w "$ADIR" ] || die "$ADIR is not writable. Re-run with --app-dest \"\$HOME/Applications\"."
|
|
if pgrep -xq virtualjaguar 2>/dev/null; then warn "Virtual Jaguar looks like it is running; quit it to finish the update cleanly."; fi
|
|
|
|
APP_BACKUP=""
|
|
if [ -d "$ATARGET" ]; then
|
|
APP_BACKUP="$ATARGET.bak"
|
|
command rm -rf "$APP_BACKUP"
|
|
command mv "$ATARGET" "$APP_BACKUP" || die "could not move the old app aside."
|
|
ok "old app kept as $(basename "$APP_BACKUP")"
|
|
fi
|
|
if ! ditto "$NEWAPP" "$ATARGET"; then
|
|
command rm -rf "$ATARGET"
|
|
[ -n "$APP_BACKUP" ] && command mv "$APP_BACKUP" "$ATARGET"
|
|
die "could not copy the app into $ADIR; the previous one was restored."
|
|
fi
|
|
INST_KIND_NEW=app
|
|
ok "installed -> $ATARGET"
|
|
|
|
# Gatekeeper. curl does not set com.apple.quarantine, so a notarized build
|
|
# opens cleanly and there is nothing to strip. We only ever act when macOS
|
|
# rejects the app AND it is quarantined, and then only with consent.
|
|
if command -v spctl >/dev/null 2>&1; then
|
|
if spctl --assess --type execute "$ATARGET" >/dev/null 2>&1; then
|
|
ok "Gatekeeper accepts it (signed and notarized)"
|
|
else
|
|
warn "Gatekeeper does not accept this build (not notarized)."
|
|
if xattr -p com.apple.quarantine "$ATARGET" >/dev/null 2>&1; then
|
|
if [ "$ALLOW_UNSIGNED" -eq 1 ] || confirm_no " Clear the quarantine flag so it can open?"; then
|
|
xattr -dr com.apple.quarantine "$ATARGET" && ok "quarantine cleared"
|
|
else
|
|
note "left quarantined. To open it: right-click the app, Open -- or"
|
|
note " xattr -dr com.apple.quarantine '$ATARGET'"
|
|
fi
|
|
else
|
|
note "it carries no quarantine flag, so it should still open. If macOS blocks it:"
|
|
note " right-click the app, Open -- or: xattr -dr com.apple.quarantine '$ATARGET'"
|
|
fi
|
|
fi
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
app_install_appimage() {
|
|
step "Installing the app"
|
|
mkdir -p "$ADIR" || die "could not create $ADIR"
|
|
APP_BACKUP=""
|
|
if [ -f "$ATARGET" ]; then
|
|
APP_BACKUP="$ATARGET.bak"
|
|
command cp -pf "$ATARGET" "$APP_BACKUP" || die "could not back up the existing AppImage."
|
|
ok "old AppImage kept as $(basename "$APP_BACKUP")"
|
|
fi
|
|
# copy next to the target, then rename over it: replacing a RUNNING AppImage in
|
|
# place fails with "text file busy", a rename does not.
|
|
command cp -f "$WORK/app/$AASSET" "$ATARGET.new" || die "could not write into $ADIR"
|
|
chmod 0755 "$ATARGET.new"
|
|
command mv -f "$ATARGET.new" "$ATARGET" || die "could not move the AppImage into place."
|
|
INST_KIND_NEW=appimage
|
|
ok "installed -> $ATARGET"
|
|
|
|
_data="${XDG_DATA_HOME:-$HOME/.local/share}"
|
|
_apps="$_data/applications"
|
|
_did=io.github.libretro.VirtualJaguar # desktop id and icon name, as the .deb uses
|
|
mkdir -p "$_apps" 2>/dev/null || true
|
|
cat > "$_apps/$_did.desktop" 2>/dev/null <<DESK || warn "could not write the .desktop entry"
|
|
[Desktop Entry]
|
|
Type=Application
|
|
Name=Virtual Jaguar
|
|
Comment=Atari Jaguar emulator
|
|
Exec="$ATARGET" %f
|
|
Icon=$_did
|
|
Terminal=false
|
|
Categories=Game;Emulator;
|
|
DESK
|
|
[ -f "$_apps/$_did.desktop" ] && ok "menu entry -> $_apps/$_did.desktop"
|
|
# Icons: the AppImage carries its hicolor tree. --appimage-extract needs no FUSE; the
|
|
# file has already been verified against SHA256SUMS.txt. Best effort: a menu entry
|
|
# without an icon is still a working entry.
|
|
_ex="$WORK/app/ai"; mkdir -p "$_ex"
|
|
( cd "$_ex" && "$ATARGET" --appimage-extract 'usr/share/icons' >/dev/null 2>&1 ) || true
|
|
if [ -d "$_ex/squashfs-root/usr/share/icons/hicolor" ]; then
|
|
mkdir -p "$_data/icons/hicolor" 2>/dev/null || true
|
|
if command cp -R "$_ex/squashfs-root/usr/share/icons/hicolor/." "$_data/icons/hicolor/" 2>/dev/null; then
|
|
ok "icons -> $_data/icons/hicolor"
|
|
command -v gtk-update-icon-cache >/dev/null 2>&1 && gtk-update-icon-cache -q -t "$_data/icons/hicolor" >/dev/null 2>&1 || true
|
|
fi
|
|
else
|
|
note "no icon found inside the AppImage; the menu entry will use a generic one"
|
|
fi
|
|
command -v update-desktop-database >/dev/null 2>&1 && update-desktop-database "$_apps" >/dev/null 2>&1 || true
|
|
|
|
case ":$PATH:" in *":$ADIR:"*) ;; *) note "$ADIR is not on your PATH; start it from the menu or run $ATARGET" ;; esac
|
|
# ldconfig is in /sbin, which a non-root PATH on Debian lacks; the library sits in a
|
|
# multiarch directory, so also look there.
|
|
_fuse=0
|
|
{ /sbin/ldconfig -p 2>/dev/null || ldconfig -p 2>/dev/null; } | grep -q 'libfuse\.so\.2' && _fuse=1
|
|
# (listed, not globbed: an unmatched glob is a hard error in zsh)
|
|
for _l in /usr/lib /usr/lib64 /lib /usr/lib/x86_64-linux-gnu /usr/lib/aarch64-linux-gnu \
|
|
/lib/x86_64-linux-gnu /lib/aarch64-linux-gnu; do
|
|
[ -e "$_l/libfuse.so.2" ] && _fuse=1
|
|
done
|
|
if [ "$_fuse" -eq 0 ]; then
|
|
warn "AppImages need FUSE 2 (libfuse.so.2). Debian/Ubuntu: sudo apt install libfuse2"
|
|
warn " (Ubuntu 24.04: libfuse2t64). Without it: $ATARGET --appimage-extract-and-run"
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
app_install_deb() {
|
|
step "Installing the app (.deb, needs root)"
|
|
SUDO=""
|
|
if [ "$(id -u)" -ne 0 ]; then
|
|
command -v sudo >/dev/null 2>&1 || die "installing a .deb needs root and sudo is not available."
|
|
SUDO="sudo"
|
|
fi
|
|
chmod 0755 "$WORK" "$WORK/app" 2>/dev/null || true # apt's sandbox user must be able to read it
|
|
chmod 0644 "$WORK/app/$AASSET"
|
|
if command -v apt-get >/dev/null 2>&1; then
|
|
as_root apt-get install -y "$WORK/app/$AASSET" || die "apt-get could not install $AASSET."
|
|
elif command -v dpkg >/dev/null 2>&1; then
|
|
as_root dpkg -i "$WORK/app/$AASSET" || die "dpkg could not install $AASSET."
|
|
else
|
|
die "neither apt-get nor dpkg is available; use --app-format appimage."
|
|
fi
|
|
INST_KIND_NEW=deb
|
|
APP_BACKUP=""
|
|
ok "installed package $DEB_PKG"
|
|
return 0
|
|
}
|
|
|
|
# ==========================================================================
|
|
# auto-update
|
|
#
|
|
# systemd user timer where available, else cron. Both are removable with
|
|
# `--auto-update off`, and both just re-run this script with --yes.
|
|
# ==========================================================================
|
|
UPDATER="$HOME/.local/bin/vj-core-update"
|
|
SYSTEMD_DIR="$HOME/.config/systemd/user"
|
|
|
|
remove_auto_update() {
|
|
_did=0
|
|
if command -v systemctl >/dev/null 2>&1; then
|
|
systemctl --user disable --now vj-core-update.timer >/dev/null 2>&1 && _did=1 || true
|
|
command rm -f "$SYSTEMD_DIR/vj-core-update.timer" "$SYSTEMD_DIR/vj-core-update.service" 2>/dev/null || true
|
|
systemctl --user daemon-reload >/dev/null 2>&1 || true
|
|
fi
|
|
if command -v crontab >/dev/null 2>&1 && crontab -l 2>/dev/null | grep -q vj-core-update; then
|
|
crontab -l 2>/dev/null | grep -v vj-core-update | crontab - && _did=1
|
|
fi
|
|
command rm -f "$UPDATER" 2>/dev/null || true
|
|
if [ "$_did" -eq 1 ]; then ok "auto-update removed"; else note "no auto-update was installed"; fi
|
|
}
|
|
|
|
setup_auto_update() {
|
|
# setup_auto_update <what-done> <core-dir or empty>
|
|
step "Setting up $AUTO_UPDATE auto-update"
|
|
mkdir -p "$(dirname "$UPDATER")"
|
|
# Every flag is passed explicitly, including --what: the updater must never
|
|
# depend on what a future default decides to install.
|
|
_args="--yes --channel \"$CHANNEL\" --what $1"
|
|
[ -n "$2" ] && _args="$_args --dest \"$2\""
|
|
[ -n "$APP_DEST" ] && _args="$_args --app-dest \"$APP_DEST\""
|
|
[ -n "$APP_FORMAT" ] && _args="$_args --app-format $APP_FORMAT"
|
|
cat > "$UPDATER" <<UPD
|
|
#!/bin/sh
|
|
# Auto-generated by the Virtual Jaguar installer. Remove with:
|
|
# sh <(curl -fsSL $RAW) --auto-update off
|
|
set -eu
|
|
curl -fsSL "$RAW" -o "\$0.tmp.\$\$"
|
|
sh "\$0.tmp.\$\$" $_args
|
|
command rm -f "\$0.tmp.\$\$"
|
|
UPD
|
|
chmod +x "$UPDATER"
|
|
ok "updater -> $UPDATER"
|
|
|
|
if command -v systemctl >/dev/null 2>&1 && systemctl --user show-environment >/dev/null 2>&1; then
|
|
mkdir -p "$SYSTEMD_DIR"
|
|
cat > "$SYSTEMD_DIR/vj-core-update.service" <<SVC
|
|
[Unit]
|
|
Description=Update Virtual Jaguar (core and/or app)
|
|
|
|
[Service]
|
|
Type=oneshot
|
|
ExecStart=$UPDATER
|
|
SVC
|
|
cat > "$SYSTEMD_DIR/vj-core-update.timer" <<TMR
|
|
[Unit]
|
|
Description=Update Virtual Jaguar ($AUTO_UPDATE)
|
|
|
|
[Timer]
|
|
OnCalendar=$AUTO_UPDATE
|
|
Persistent=true
|
|
|
|
[Install]
|
|
WantedBy=timers.target
|
|
TMR
|
|
systemctl --user daemon-reload >/dev/null 2>&1 || true
|
|
if systemctl --user enable --now vj-core-update.timer >/dev/null 2>&1; then
|
|
ok "systemd user timer enabled ($AUTO_UPDATE)"
|
|
note "status: systemctl --user status vj-core-update.timer"
|
|
else
|
|
warn "could not enable the systemd timer; falling back to cron"
|
|
AUTO_UPDATE_CRON=1
|
|
fi
|
|
else
|
|
AUTO_UPDATE_CRON=1
|
|
fi
|
|
|
|
if [ "${AUTO_UPDATE_CRON:-0}" = 1 ]; then
|
|
if command -v crontab >/dev/null 2>&1; then
|
|
case "$AUTO_UPDATE" in
|
|
daily) _sched="17 4 * * *" ;;
|
|
weekly) _sched="17 4 * * 0" ;;
|
|
esac
|
|
{ crontab -l 2>/dev/null | grep -v vj-core-update; printf '%s %s\n' "$_sched" "$UPDATER"; } | crontab -
|
|
ok "cron entry added ($AUTO_UPDATE)"
|
|
else
|
|
warn "neither a systemd user session nor crontab is available."
|
|
warn "Run $UPDATER yourself when you want to update."
|
|
fi
|
|
fi
|
|
note "remove later with: $SELF --auto-update off"
|
|
}
|
|
|
|
# ==========================================================================
|
|
# main
|
|
# ==========================================================================
|
|
if [ "$AUTO_UPDATE" = "off" ]; then
|
|
step "Removing auto-update"; remove_auto_update; exit 0
|
|
fi
|
|
|
|
# --list: report, install nothing. The core half is allowed to find nothing.
|
|
if [ "$LIST_ONLY" -eq 1 ]; then
|
|
set +e; ( set -e; core_install ); set -e
|
|
app_status
|
|
exit 0
|
|
fi
|
|
|
|
# What to install. Unattended runs must keep doing what they always did -- the
|
|
# core -- so the app is added only when THIS script installed it before.
|
|
app_detect
|
|
if [ -z "$WHAT" ]; then
|
|
if [ "$INTERACTIVE" -eq 1 ] && [ "$ASSUME_YES" -eq 0 ]; then
|
|
_def=1
|
|
[ -n "$INST_KIND" ] && _def=3
|
|
step "What do you want to install?"
|
|
say " 1) the RetroArch core ${D}for RetroArch, RetroPie, Lakka ...${R}"
|
|
say " 2) the Virtual Jaguar app ${D}standalone, no RetroArch needed (from v4.0)${R}"
|
|
say " 3) both"
|
|
[ -n "$INST_KIND" ] && note "app found: $INST_PATH ${INST_VER:+(version $INST_VER)}"
|
|
case "$(ask ' Number' "$_def")" in
|
|
2) WHAT=app ;;
|
|
3) WHAT=both ;;
|
|
*) WHAT=core ;;
|
|
esac
|
|
else
|
|
WHAT=core
|
|
if app_has_receipt; then WHAT=both; CORE_SOFT=1; fi
|
|
fi
|
|
fi
|
|
|
|
# Channel
|
|
if [ "$CHANNEL" = "latest" ] && [ "$INTERACTIVE" -eq 1 ] && [ "$ASSUME_YES" -eq 0 ] && [ -z "$AUTO_UPDATE" ]; then
|
|
step "Which build?"
|
|
say " 1) latest release ${D}stable, recommended${R}"
|
|
say " 2) nightly ${D}every push to develop; gated on compiling, not on tests${R}"
|
|
say " 3) a specific version ${D}e.g. v3.5.1${R}"
|
|
case "$(ask ' Number' '1')" in
|
|
2) CHANNEL="nightly" ;;
|
|
3) CHANNEL=$(ask " Tag" "v3.5.1") ;;
|
|
*) CHANNEL="latest" ;;
|
|
esac
|
|
fi
|
|
|
|
CORE_RC=0; APP_RC=0
|
|
if [ "$WHAT" = core ] || [ "$WHAT" = both ]; then
|
|
# `set +e` around the subshell: inside `cmd || ...` errexit is ignored, which
|
|
# would let a failed step carry on silently. The subshell turns -e back on.
|
|
set +e; ( set -e; core_install ); CORE_RC=$?; set -e
|
|
if [ "$CORE_RC" -ne 0 ]; then
|
|
if [ "$WHAT" = both ]; then warn "the core step failed (see above); carrying on with the app."
|
|
else exit "$CORE_RC"; fi
|
|
fi
|
|
fi
|
|
if [ "$WHAT" = app ] || [ "$WHAT" = both ]; then
|
|
set +e; ( set -e; app_install ); APP_RC=$?; set -e
|
|
if [ "$APP_RC" -ne 0 ]; then
|
|
# 3 = "no app build published for this channel": graceful when the core ran
|
|
if [ "$APP_RC" -eq 3 ] && [ "$WHAT" = both ]; then APP_RC=0; fi
|
|
fi
|
|
fi
|
|
|
|
# optional auto-update (never on a dry run)
|
|
if [ "$DRY_RUN" -eq 0 ] && [ "$CORE_RC" -eq 0 ] && [ "$APP_RC" -eq 0 ]; then
|
|
if [ -z "$AUTO_UPDATE" ] && [ "$INTERACTIVE" -eq 1 ] && [ "$ASSUME_YES" -eq 0 ]; then
|
|
step "Keep it up to date automatically?"
|
|
say " 1) no ${D}re-run this script when you want to update${R}"
|
|
say " 2) weekly"
|
|
say " 3) daily"
|
|
case "$(ask ' Number' '1')" in
|
|
2) AUTO_UPDATE=weekly ;;
|
|
3) AUTO_UPDATE=daily ;;
|
|
*) AUTO_UPDATE="" ;;
|
|
esac
|
|
fi
|
|
if [ -n "$AUTO_UPDATE" ]; then
|
|
_cd=""
|
|
[ -s "$WORK/core_dir" ] && _cd=$(cat "$WORK/core_dir")
|
|
setup_auto_update "$WHAT" "$_cd"
|
|
fi
|
|
fi
|
|
|
|
[ "$CORE_RC" -ne 0 ] && exit "$CORE_RC"
|
|
exit "$APP_RC"
|