The NEON hscale function only supports X8 filter sizes and should only
be selected when these are being used. At the moment filterAlign is
set to 8 but in the future when extra NEON assembly for specific sizes is
added they will need to have checks here too.
The immediate usecase for this change is making the hscale checkasm
test easier and without NEON specific edge-cases (x86 already has these
guards).
This applies the same fix from 718c8f9aa5
on the 32 bit arm version of the function, fixing fate-checkasm-sw_scale
there.
Signed-off-by: Martin Storsjö <martin@martin.st>
The NEON hscale function only supports X8 filter sizes and should only
be selected when these are being used. At the moment filterAlign is
set to 8 but in the future when extra NEON assembly for specific sizes is
added they will need to have checks here too.
The immediate usecase for this change is making the hscale checkasm
test easier and without NEON specific edge-cases (x86 already has these
guards).
Signed-off-by: Josh de Kock <josh@itanimul.li>
libswscale/vscale.c makes extensive use of function pointers and in
doing so it converts these function pointers to and from a pointer to
void. Yet this is actually against the C standard:
C90 only guarantees that one can convert a pointer to any incomplete
type or object type to void* and back with the result comparing equal
to the original which makes pointers to void generic pointers to
incomplete or object type. Yet C90 lacks a generic function pointer
type.
C99 additionally guarantees that a pointer to a function of one type may
be converted to a pointer to a function of another type with the result
and the original comparing equal when converting back.
This makes any function pointer type a generic function pointer type.
Yet even this does not make pointers to void generic function pointers.
Both GCC and Clang emit warnings for this when in pedantic mode.
This commit fixes this by using a union that can hold one member of any
of the required function pointer types to store the function pointer.
This works even for C90.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The x18 is a reserved platform register on Darwin and Windows.
x8/w8 seems to be unused in this function though (and same about
x10 and x14), so there's really no reason to use x18 here - just change
the uses of x18/w18 into x8/w8 instead without any further rewrites.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes: signed integer overflow: 1169365504 + 981452800 cannot be represented in type 'int'
Fixes: ticket8293
Found-by: Suhwan
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 524280 * 4432 cannot be represented in type 'int'
Fixes: ticket8322
Found-by: Suhwan
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add swscale input support for Y210LE, output support and fate
test could be added later if there is requirement for software
CSC to this packed format.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Tested using this command:
/ffmpeg -pix_fmt yuv420p -s 1920*1080 -i ArashRawYuv420.yuv \
-vcodec rawvideo -s 1920*1080 -pix_fmt rgb24 -f null /dev/null
The fps increase from 389 to 640 on Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz
Signed-off-by: Ting Fu <ting.fu@intel.com>
Bug #8255 points out a double free error in libwscale/utils.c file.
The double free is because the pointer to cascaded_context of an
sw_context is not set to NULL after freeing it. When the sw_context
is later freed, sws_freeContext is called on the cascaded_context,
causing a double free.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The original inline assembly and nasm code have the same fps when called by command.
NASM code almost has no impact on the perfromance.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch rewrites the innermost loop of ff_yuv2planeX_8_neon to avoid zips and
horizontal adds by using fused multiply adds. The patch also uses ld1r to load
one element and replicate it across all lanes of the vector. The patch also
improves the clipping code by removing the shift right instructions and
performing the shift with the shift-right narrow instructions.
I see 8% difference on an m6g instance with neoverse-n1 CPUs:
$ ffmpeg -nostats -f lavfi -i testsrc2=4k:d=2 -vf bench=start,scale=1024x1024,bench=stop -f null -
before: t:0.014015 avg:0.014096 max:0.015018 min:0.013971
after: t:0.012985 avg:0.013013 max:0.013996 min:0.012818
Tested with `make check` on aarch64-linux.
Signed-off-by: Sebastian Pop <spop@amazon.com>
Reviewed-by: Clément Bœsch <u@pkh.me>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch implements ff_hscale_8_to_15_neon with NEON fused multiply accumulate
and bumps the vectorization factor from 2 to 4.
The speedup is of 25% on Graviton1 A1 instances based on A-72 cpus:
$ ffmpeg -nostats -f lavfi -i testsrc2=4k:d=2 -vf bench=start,scale=1024x1024,bench=stop -f null -
before: t:0.040303 avg:0.040287 max:0.040371 min:0.039214
after: t:0.032168 avg:0.032215 max:0.033081 min:0.032146
The speedup is of 39% on Graviton2 m6g instances based on Neoverse-N1 cpus:
$ ffmpeg -nostats -f lavfi -i testsrc2=4k:d=2 -vf bench=start,scale=1024x1024,bench=stop -f null -
before: t:0.019446 avg:0.019423 max:0.019493 min:0.019181
after: t:0.014015 avg:0.014096 max:0.015018 min:0.013971
Tested with `make check` on aarch64-linux.
Signed-off-by: Sebastian Pop <spop@amazon.com>
Reviewed-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The argument to vec_splat_u16 must be a literal. By making the
function always inline and marking the arguments const, gcc can
turn those into literals, and avoid build errors like:
swscale_vsx.c:165:53: error: argument 1 must be a 5-bit signed literal
Fixes#7861.
Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Lauri Kasanen <cand@gmx.com>
While this technically compiles in current ffmpeg, this is only
because ffmpeg is compiled in strict ISO C mode, which disables
the builtin 'vector' keyword for AltiVec/VSX. Instead this gets
replaced with a macro inside altivec.h, which defines vector to
be actually __vector, which accepts random types.
Normally, the vector keyword should be used only with plain
scalar non-typedef types, such as unsigned int. But we have the
vec_(s|u)(8|16|32) macros, which can be used in a portable manner,
in util_altivec.h in libavutil.
This is also consistent with other AltiVec/VSX code elsewhere in
the tree.
Fixes#7861.
Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Affected the FATE-tests vsynth_lena-dv-411, vsynth1-dv-411,
vsynth2-dv-411 and hevc-paramchange-yuv420p.yuv420p10.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This affected many FATE-tests: The number of failing tests went down
from 663 to 344. (Both numbers exclude tests that failed because of
unaligned accesses in code that is inside #if HAVE_FAST_UNALIGNED.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
