when the segments largest duration value is look like 4.000000, the
EXT-X-TARGETDURATION value should equ 4.
it's wrong when hlsenc use ceil, so fix it.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
The following three commits created a regression by writing initially
invalid mkv headers:
a0dc38e1a9 avformat/matroskaenc: write a
CRC32 element on Tags
e0ea601ecc avformat/matroskaenc: write a
CRC32 element on Info
4d829ebeb1 avformat/matroskaenc: postpone
writing the Tracks master
Symptoms:
- You can no longer playback a file that is still processed by ffmpeg,
e.g. VLC fails playback
- You can no longer stream a file to a client while if is still being
processed
- Various diagnosing tools show header errors or incomplete headers
(e.g. ffprobe, mediainfo, mkvalidator)
Note: The symptoms do not apply to completed files or ffmpeg runs that
were interrupted with 'q'
Cause:
The mentioned commits made changes in a way that some header elements
are only partially written in
mkv_write_header, leaving the header in an invalid state. Only in
mkv_write_trailer, these elements
are finished correctly, but that does only occur at the end of the
process.
Regression:
Before these commits were applied, mkv headers have always been valid,
even before completion of ffmpeg.
This has worked reliably over many versions of ffmpeg, to it was an
obvious regression.
Bugtracker:
This issue has been recorded as #5977 which is resolved by this patch
Patch:
The patch adds a new function 'end_ebml_master_crc32_preliminary' that
preliminarily finishes the ebml
element without destroying the buffer. The buffer can be used to update
the ebml element later during
mkv_write_trailer. But most important: mkv_write_header finishes with a
valid mkv header again.
Signed-off-by: James Almer <jamrial@gmail.com>
This commit adds the avio_get_dyn_buf function which allows accessing
the
content of a DynBuffer without destroying it.
This is required in matroskaenc for preliminary writing (correct) mkv
headers.
Context for this change is fixing regression bug #5977.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
CID: 1398228
Passing null pointer dirname to strlen, which dereferences it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in get_default_pattern_localtime_fmt the default pattern contains
%Y%m%d%H%I%S but the original intention was %Y%m%d%H%M%S
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
fix CID: 1398364 Resource leak
refine the code of the new options
Reviewed-by: Bodecs Bela <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
A wrong, unitialized variable is used for testing. This patch fixes this
typo.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
1st:
This patch makes it possible to put actual segment file size (measured
in bytes) and/or duration (calculated in microseconds) into segment
filenames. This feature is useful when post-processing live streaming
access log files. New behaviour works only when -use_localtime option
is set and second_level_segment_size or/and
second_level_segment_duration new hls_flags are specified. %%s is the
placeholder for size and %%t for duration in hls_segment_filename
option. Fix sized trailing zeropadding also works eg. %%09s or %%023t.
A command to test new features:
./ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i sine=f=440:b=4:r=44100 -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags
second_level_segment_index+second_level_segment_size+second_level_segment_duration
-use_localtime 1 -use_localtime_mkdir 1 -hls_segment_filename
"segment_%Y%m%d%H%M%S_%%04d_%%08s_%%013t.ts" stream.m3u8
2nd:
doc/muxers: beside second_level_segment_duration and second_level_segment_size,
added some more details and example to hls_segment_filename,
use_localtime, use_localtime_mkdir, hls_flags. hls_flags option list
reformatted to table
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
if the http server don't response the http command,
then the thread will be blocked and never be interrupted.
Reported-by: yinyunjiang <yinyunjiang1991@qq.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current implementation of finding duplicate segment filenames may fail
if use_localtime_mkdir and use_localtime are in effect and
segment_filename option expression contains subdirectories with
date/time specifiers. This patch fixes this false behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in hlcenc.c, in the hls_write_header() function the default format
string for strftime() function contains %s specifier when use_localtime
is true. This %s specifier will insert the seconds since EPOCH. But %s
is not available on all system/environment. This patch check %s
availabilty at runtine and alter the default format string if necessary.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
In ff_index_search_timestamp(), if b == num_entries,
m == num_entries - 1, and entries[m].flags & AVINDEX_DISCARD_FRAME is
true, then the search for the next non-discarded packet could access
entries[nb_entries], exceeding its bounds. This change adds a protection
against that scenario. Reference: https://crbug.com/666770
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When delete_segments hls_flag is specified, deleting old segments may
fail in certain cases when use_localtime_mkdir is in effect and
hls_segment_filename expression contains subdirs. This patch fixes this
behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in filenames
Putting date/time values into segment filenames is very usefull.
But to produce non-conflicting segment filenames with -use_localtime
option with date/time
values in hls_segment_filename option, sometimes is not enough.
Like in cases when multiple segments produced in the same second.
But hlsenc currently does not make possible to use segment index (%d) at
the
same time whe use_localtime is in effect, due to identifier conflict.
This patch makes possible to use strftime identifiers and still put
segment index (%d) at same time in segment filenames by introducing
second_level_segment_index flag. When -use_localtime is active,
identifier %d is for month day index, so %%d is the segment index
placeholder. This enhanced behaviour only exists when new
second_level_segment_index flag is specified.
For instance putting 'segment_%Y%m%d%H%M%S_%%05d.ts' value into
-hls_segment_filename option and specifing -hls_flags
second_level_segment_index and -use_localtime 1, may produce segment
filename as 'segment_20161230235758_00002.ts'
An example:
ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i anullsrc=r=44100:cl=stereo -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags delete_segments+second_level_segment_index -use_localtime 1
-hls_segment_filename "segment_%Y%m%d%H%M%S_%%05d.ts" stream.m3u8
will produce segments filenames:
....
segment_20161227005902_00013.ts
segment_20161227005902_00014.ts
segment_20161227005902_00015.ts
segment_20161227005903_00016.ts
segment_20161227005903_00017.ts
segment_20161227005903_00018.ts
segment_20161227005903_00019.ts
segment_20161227005903_00020.ts
....
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
initial_prog_date_time shouldn't be adjusted when deleting segments
from disk, but rather when segments are removed from the playlist.
Signed-off-by: Jesper Ek <deadbeef84@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
ffmpeg-devel
with use_localtime parameter hlsenc may produce identical filenames for
different but still existing segments. It happens when
hls_segment_filename contains
syntacticaly correct but inadequate format parameters. Currently there
is no any log message when such a situaton occurs but these cases should
be avoided in most times. This patch generate warning log messages in
these cases.
ticketID: #6043
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Fixes pts gaps when reading AVI files > 256GiB generated by FFmpeg.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it possible to decode motion jpeg 2000
encoded in a transport stream without a correct PMT/PAT.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Clang is not able to eliminate the reference to ff_spdif_probe() when
there is a goto target in the same block and optimization is disabled.
This fixes the following build failure on OS X:
./configure --disable-everything --disable-doc \
--enable-decoder=pcm_s16le --enable-demuxer=wav \
--enable-protocol=file --disable-optimizations --cc=clang
make
...
Undefined symbols for architecture x86_64:
"_ff_spdif_probe", referenced from:
_set_spdif in libavformat.a(wavdec.o)
ld: symbol(s) not found for architecture x86_64
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
MPEG Audio frame header must be 4 bytes. If we fail to read
4 bytes bail early to avoid Use-of-uninitialized-value msan error.
Reference https://crbug.com/666874.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The demuxer doesn't fill the defaults if the master isn't present.
This results in codecpar->color_space being set with a value of
zero (RGB) on such files.
Signed-off-by: James Almer <jamrial@gmail.com>
Steven Liu