Enables option for hevc_qsv encoder:
-extbrc
Improvements in BD-Rate could be observed with extbrc on.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Currently width_align and height_align are zero when encoding with mjpeg_qsv,
which causes "Error submitting the frame for encoding". This patch sets the alignments.
There is a little bit more about the problem here http://ffmpeg.org/pipermail/ffmpeg-user/2019-November/046143.html
Signed-off-by: JonCookCubic <jon.cook@cubicmotion.com>
Signed-off-by: Zhong Li <zhongli_dev@126.com>
Add -tile_rows and -tile_cols option to specify the number of tile rows
and columns for ICL+ (gen 11) platform.
A tile must wholly contain all the slices within it. Slices cannot cross
tile boundaries. So the slice number would be implicitly resized to the
max(nSlice, nTile).
Example:
ffmpeg -v verbose -hwaccel qsv -init_hw_device qsv=hw
-filter_hw_device hw -f rawvideo -s:v 1920x1080 -i ./input.nv12 -vf
format=nv12,hwupload=extra_hw_frames=64 -c:v hevc_qsv -tile_rows 2
-tile_cols 2 -slices 4 -y output.h265
Also dump the actual quantity of encoded tiled rows and columns in run
time.
Fix the enhancement #8400.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
1. must enable low_power mode since just VDENC can be supported by iHD
driver right now
2. Coding option1 and extra_data are not supported by MSDK
3. IVF header will be inserted in MSDK by default, but it is not needed
for FFmpeg, so disable it.
Signed-off-by: Zhong Li <zhongli_dev@126.com>
MFXVideoENCODE_Query calls CheckVideoParamQueryLike in MSDK and
will determine whether to set param.mfx.TargetKbps to the allowed
minTargetKbps according to the bitrate_limit in extco2 buffer.
Thus q->param.ExtParam must be set before MFXVideoENCODE_Query in case
minTargetKbps is written to TargetKbps by default.
1080P AVC encoding with option "-bitrate_limit 0 -b:v 100k":
Before patch:
902 kbps
After patch:
156 kbps
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
GPU copy enables or disables GPU accelerated copying between video
and system memory. This may lead to a notable performance improvement.
Memory must be sequent and aligned with 128x64.
CMD:
ffmpeg -init_hw_device qsv=hw -filter_hw_device hw -c:v h264_qsv
-gpu_copy on -i input.h264 -f null -
or:
ffmpeg -c:v h264_qsv -gpu_copy on -i input.h264 -f null -
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: ChaoX A Liu <chaox.a.liu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
MSDK does not create internal acceleration device on Linux,
So MFXVideoCORE_SetHandle() is necessary.
It has been added for ff_qsv_init_session_device().
But missed for ff_qsv_init_internal_session() due to commit
1f26a23 overwrited commit db89f45Fix#7030
Signed-off-by: Zhong Li <zhong.li@intel.com>
frame->enc_ctrl.Payload is malloced in get_free_frame, directly memset
the whole structure of enc_ctrl to zero will cause the memory leak for
enc_ctrl.Payload.
frame->enc_ctrl as a structure will be malloc and init to zero by calling
frame = av_mallocz(sizeof(*frame)), so the memset is redundant and can
be removed.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
GPB is the default type, just contains forward references but the
slice_type is B slice with higher encoding efficiency than regular P
slice, but lower performance.
Add an option to allow user to set regular P slice.
Fix ticket#6870
Test data on Intel Kabylake (i7-7567U CPU @ 3.50GHz):
1. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 0 -bf 0 -q 25 test_gpb_off_bf0_kbl.mp4
transcoding fps: 85
encoded file size of test_gpb_off_bf0_kbl.mp4: 21960100 (bytes)
2. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 1 -bf 0 -q 25 test_gpb_on_bf0_kbl.mp4
transcoding fps: 79
encoded file size oftest_gpb_on_bf0_kbl.mp4: 21211449 (bytes)
In this case, enable gpb can bring about 7% performance drop but 3.4% encoding efficiency improvment.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Always exposes low_power option for all qsv encoder, and reports a warning
if VDENC is not supported in current version of MSDK.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Fix ticket #7663
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Add VDENC(lowpower mode) support for QSV H264
It's an experimental function(like lowpower in vaapi) with
some limitations:
- CBR/VBR require HuC which should be explicitly loaded via i915
module parameter(i915.enable_guc=2 for linux kernel version >= 4.16)
Use option "-low_power 1" to enable VDENC.
Add in dump_video_param() to show the status of VDENC in runtime log.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Fix the (m)jpeg encoding regression issue as decription in tikect #7593,
due to bs->FrameType is not set in such case in
MSDK (https://github.com/Intel-Media-SDK/MediaSDK/issues/970).
(And assert on a value coming from an external library is not proper.)
Add default type check for bs->FrameType, and return invalid data error in function
ff_qsv_encode to avoid using uninitialized value.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
RepeatPPS is enabled by default in mfx. It is not necessary mostly and
wasting encoding bits.
Add an option to control it and disable it by default.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Assert in function ff_qsv_encode to avoid using uninitialized value:
FF_DISABLE_DEPRECATION_WARNINGS
avctx->coded_frame->pict_type = pict_type;
FF_ENABLE_DEPRECATION_WARNINGS
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
This option can be used to repect original input I/IDR frame type.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Fixes high memory usage and prevents over allocation of the frames via
proper unref.
Can be checked as:
-hwaccel qsv -c:v h264_qsv -i ../h264-conformance/CANL2_Sony_E.jsv -c:v
h264_qsv -b:v 2000k -y qsv.mp4
* commit 'f8060865f3e1a16c62e0d337ef0979b6ee4ba457':
qsvenc: use the compression_level to replace private option
Merged-by: James Almer <jamrial@gmail.com>
Add fix a memory leak issue as James's comments.
V2: use a local pict_type since coded_frame is deprecated.
Signed-off-by: Zhong Li <zhong.li@intel.com>
we need to make sure that memory allocation for Y/UV planes is continuous and re-used from a
pool
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Use a common way to control target_usage, keeping consistent with vaapi
encoders. The private option preset is kept only for compatibility.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
