This removes the use of the nonstandard combined structures, which
generated some warnings with clang and will cause alignment problems
with some parameter buffer types.
Following 41a10e11f1 they contain allocated
unit arrays which will get leaked. These operations were inconsistently
applied and never actually needed (the old uninit left them in the correct
state), so just drop them entirely.
Currently, a fragment's unit array is constantly reallocated during
splitting of a packet. This commit changes this: One can keep the units
array by distinguishing between the number of allocated and the number
of valid units in the units array.
The more units a packet is split into, the bigger the benefit.
So MPEG-2 benefits the most; for a video coming from an NTSC-DVD
(usually 32 units per frame) the average cost of cbs_insert_unit (for a
single unit) went down from 6717 decicycles to 450 decicycles (based
upon 10 runs with 4194304 runs each); if each packet consists of only
one unit, it went down from 2425 to 448; for a H.264 video where most
packets contain nine units, it went from 4431 to 450.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
The SAR of the input could have a numerator or denominator greater than
2^16 which would then be truncated to a 16-bit integer when written to
the VUI parameters, giving a random result. Instead, reduce the SAR to
the nearest representable fraction.
Fixes#7502.
A recent version of the standard changed the max and default to 15, from
16 in older versions. This updates the default to 15 to match, but the
max stays as 16 so that we don't reject older streams.
constraint_set1_flag should be set for constrained baseline and main
profiles, because the stream conforms to main profile.
constraint_set3_flag should be set for high profile when the stream
is intra-only.
constraint_set4_flag should always be set for main and high profiles
because interlaced encoding is not supported.
constraint_set5_flag should be set for main and high profiles when
B-frames are not used.
Also fix the setting of max_num_ref_frames - use the gop_size value
to check for intra-only rather than the constraint flag (which is not
necessarily set).
Add a larger warning more clearly explaining the consequences of missing
packed header support in the driver. Also only write the extradata if the
user actually requests it via the GLOBAL_HEADER flag.
Choose what types of reference frames will be used based on what types
are available, and make the intra-only mode explicit (GOP size one,
which must be used for MJPEG).
This was added in libva 2.1.0 (VAAPI 1.1.0). Use AVCodecContext.qmax,
matching the existing behaviour for qmin, and clean up the defaults so
that we only pass min/max when explicitly set.
Query which modes are supported and select between VBR and CBR based
on that - this removes all of the codec-specific rate control mode
selection code.
Previously there was one fixed choice for each codec (e.g. H.265 -> Main
profile), and using anything else then required an explicit option from
the user. This changes to selecting the profile based on the input format
and the set of profiles actually supported by the driver (e.g. P010 input
will choose Main 10 profile for H.265 if the driver supports it).
The entrypoint and render target format are also chosen dynamically in the
same way, removing those explicit selections from the per-codec code.
* commit '499f82201a1cdce7a82f77cb1162e05daff7e8d3':
cbs: Refcount all the things!
Some changes for bitstream API.
Merged-by: Mark Thompson <sw@jkqxz.net>
This makes it easier for users of the CBS API to get alloc/free right -
all subelements use the buffer API so that it's clear how to free them.
It also allows eliding some redundant copies: the packet -> fragment copy
disappears after this change if the input packet is refcounted, and more
codec-specific cases are now possible (but not included in this patch).
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
From ffmpeg commit 349ea7b2a3.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
* commit 'd543d6a676a317d7a350f0cd67572274ba1f5454':
vaapi_h264: Add workaround for bad SEI in old Intel drivers
Merged-by: Mark Thompson <sw@jkqxz.net>
With pre-2.0 Intel drivers in CBR mode, if an explicit SEI message with
the old (now deprecated) type is not included, the driver generates and
inserts some timing SEI which is almost certainly invlaid. Before
87b3a0f783 we always inserted our own SEI
so this would not be visible, but since then it has been possible to
disable that. We would also like to avoid using the deprecated type,
and using the new type, while working in old drivers, does not suppress
the spurious message like the old type does.
Therefore, suppress the bad SEI insertion by providing a zero-length
buffer with the old type, which the driver can insert harmlessly.
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This has been deprecated in libva2 because hardware does not and will not
support it. Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
(cherry picked from commit 19388a7200)
Mark Thompson