Passes following piglit:
- spec@khr_parallel_shader_compile@basic
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16172>
Utgard supports MSAA 4x, so wire it up.
RSW bits were already REd by Luc, the only remaining part was storing
non-resolved buffers, reloading them (including for depth/stencil) and
doing MSAA resolve.
To store non-resolved buffer we need to set mrt_pitch and mrt_bits
registers in WB, and to resolve non-resolved buffer we need to reload
it into individual samples and then write out with mrt_bits = 0, it's
now done by lima blitter.
We also need to do resolve on transfer_map() of multi-sampled buffers,
so utilize u_transfer_helper for that.
As a side fix, it turns out that our wb_reg definition wasn't correct,
'zero' isn't always zero, it's set if we need to swap channels, and
it goes before mrt_bits. mrt_bits actually enables multiple MRTs,
so this commit renames 'zero' to 'flags' and changes its position.
If mrt_bits == 0 and MSAA is enabled, GPU does resolve
in place, to expose this functionality we set PIPE_CAP_SURFACE_SAMPLE_COUNT.
Fixes dEQP-GLES2.functional.multisample.*
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13963>
st/mesa will expose GL_ARM_shader_framebuffer_fetch_depth_stencil
if this new capability is supported by the driver.
Signed-off-by: Pavel Asyutchenko <sventeam@yandex.ru>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13979>
It seems recent versions of Sphinx has started issuing a warning when
language isn't set to a recognized value. Since we're building with
warnings as errors on CI, this causes issues for people.
We're writing English docs, so we should set this to English. I probably
confused this setting with the highlight_language setting or something
when I set this up initially.
Fixes: 00cd1346bf ("docs: use sphinx")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6711
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17159>
this is for drivers like zink that may or may not
handle dithering and so getting blend state changes
when this state changes isn't useful
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17043>
On GFX9 and older, the driver needs to swizzle itself it seems.
Exposing it on GFX10+, allows us to test it with Zink, at least.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17057>
By doing this, now the global variable impl_tss_dtor_tbl are only defined one time.
So the memory usage would reduced
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15087>
This requirement is for ARB_texture_buffer_object_rgb32, which obviously
needs the UNIFORM_TEXEL_BUFFER bit, not SAMPLED_IMAGE.
Fixes: c3d7de47cd ("docs/zink: add GL 4.0 requirements")
Fixes: 6b38907b7f ("zink: fix feature requirement")
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17024>
If this environment variable is set, then a detected compute engine
will be used as described in docs/envvars.rst.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14395>
piglit select tests fail, so add a gallium cap to disable
for crocus explicitly.
crocus may choose to enable hardware select only for GPU
SKU which tested to be OK again.
Fixes: 6489af145c ("mesa: enable HardwareAcceleratedSelect")
Closes: #6644
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16955>
This is a clearer name for what it does than MUL_ZERO_WINS, and matches up
to the new name in shader_info.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16176>
It should be more efficient than u_blitter since it skips
vertex shader stage. Also it's a prerequisite for supporting
MSAA since u_blitter can't do MSAA resolve for us.
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16686>
Pass all dEQP-VK.transform_feedback.primitives_generated_query.*.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15639>
When lower_wpos_pntc is used, the state tracker inserts code to
transform gl_PointCoord.y according to a uniform, to account for
API-requested point coordinate origin and framebuffer orientation. With
the transformation, driver-supplied point coordinates are expected to
have an upper left origin.
If the hardware point coordinate supports (only) a lower left origin,
the backend has to use lower_wpos_pntc and then lower *again* to flip
back. This ends up transforming twice, which is wasteful:
a = load point coord Y with lower left origin
a' = 1.0 - a
a'' = uniform_transform(a')
However, lower_wpos_pntc is quite capable of transforming for a lower
left origin too, it just needs to flip the transformation. Add a CAP
specifying the point coordinate origin convention, rather than assuming
upper-left. This simplifies the Asahi code greatly.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16829>
to allow exposing 4G - 1. The "SIZE" was also a misnomer because it meant
elements. This no longer clamps the size to INT_MAX in st/mesa.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16881>
The drivers not setting it were:
- nv30, which gets lowering using NIR's lower_fsat flag.
- r300, which gets lowering using NIR's lower_fsat flag.
- a2xx, which has was getting it optimized back to fsat anyway.
This drops the check for the cap from gallium nine. While nine does have
a non-nir path, I think it's safe to assume that if you have SM3
texturing, you can do fsat.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16823>
There's no way currently in virgl to determine whether it's running
above CPU or GPU. This info will be used to disable HW SELECT.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15765>
This is used for the old, buggy and slow GLSL IR loop unrolling
code. All drivers have now switched to the NIR unrolling code so
here we remove the CAP.
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16366>
This is already allowed by the gallium driver, which uses the same code
for image layout and image views, so everything Just Works and the tests
pass. radv doesn't enable the sampler feature, but I don't see any
reason it wouldn't work and the tests pass.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16806>
VK_KHR_format_feature_flags2 is mostly about define a new 64-bit
VkFormatFeatureFlagBits2KHR format feature flag type, as 29 bits of
the 32-bit VkFormatFeatureFlagBits are already in use.
So all the bits from VkFormatFeatureFlagBits are being replicated, and
most of the work here consist on switch to the new flags.
From the new (not replicated from VkFormatFeatureFlagBits) flag bits,
we don't support
VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT_KHR or
VK_FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT_KHR, as right now
we require the format on the shader for doing the read and stores.
We use now VK_FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT_KHR,
but only applying it for depth formats.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16718>
No FMASK on GFX11 which means I don't think we can expose this ext.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16557>
Ray queries and acceleration structure builds
are quite stable now and so we can enable those
features for CI and more feedback and bug reports.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16007>
It looks like we don't need to do anything special to enable it.
Piglit spec@arb_buffer_storage@bufferstorage-persistent skip: 16 =>
skip: 12, pass: 4. The rest require GL_ARB_shader_image_load_store
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16660>
Fix the syntax to show the files in the generated sphinx, otherwise
they just don't show at all.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15599>
gallium can't directly support vertex attribute instance rate zero, since
the instance rate is also used to determine if the data is per-vertex or
per-instance in the first place (hence divisor zero meaning the data is
per vertex).
While it's an optional feature for VK_EXT_vertex_attribute_divisor, some
apps require it to work (it's a standard d3d10 feature and widely
supported), hence translate it away as MAX_UINT32 divisor instead (which
at this point probably makes more sense than to change the gallium
interface), which should work all the same.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16526>
This pass new dEQP-VK.pipeline.*.image_2d_view_3d_image.*.
This should also fix a GPU hang with Deus Ex: Mankind Divided and Zink.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16294>
This allows to support at least one binary format in
GL_ARB_get_program_binary extension.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16433>
Now that all consumers of GLSL use NIR, make the remaining drivers take
the path that relies on NIR to really do optimization.
nouveau steam shader-db runtime -6.69631% +/- 1.29235% (n=12).
No change on shader-db there.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16364>
The only interesting ones here were LOWER_IF_THRESHOLD (which previously
had connected to some lowering in GLSL that was broken in the face of side
effects), and FMA (which turned GLSL IR's fma() into TGSI_OPCODE_FMA
instead of MAD).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8044>
We don't currently benefit from seeing barriers and layout
transitions that affect just the depth or stencil aspects,
so we don't expose this feature.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16344>
