I created a new and cleaner favicon for mesa3d.org, and it seems like a
good idea to use that one for the docs as well.
While we're at it, replace the original PNG with the original SVG asset
the ICO-file was generated from.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5643>
Now that tu_cs_emit_regs is used for the scissor, it hits an assert when
the scissor is too large. Fixes this dEQP test:
dEQP-VK.draw.scissor.static_scissor_max_int32
Fixes: 9c0ae5704d ("turnip: fix empty scissor case")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5655>
My attempt to be clever here backfired, it overwrites the pNext and stops
the loop (causing deqp to fail to query extension features after that).
Fixes: 62de79ac44 ("turnip: implement VK_KHR_shader_draw_parameters")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5654>
This was already done correctly for the indirect variants, and turnip
was setting the correct value, but it seems freedreno missed the change
in the non-indirect variant. Also, fix a misspelling of "indices" and
add a type to INDX_SIZE.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5644>
This was assuming that unused temporaries are written but never read,
since the NOP register can only be used as a destination register,
but we can end up here also for temporaries that are read once but
never written.
This was found with a graphicsfuzz test that has a switch with
cases that have unreachable discards. In that test, NIR genrates
code like this:
decl_reg vec3 32 r19
...
r20 = mov r19.z
r21 = mov r19.y
r22 = mov r19.x
Where r19.xyz would generate 3 temporary registers that are read but
never written, so we would rewrite them to point to the NOP register
as QPU instruction sources, which is not allowed and would hit an
assert that expect magic reads to be from [r0,r5] only.
Fixes:
dEQP-VK.graphicsfuzz.unreachable-switch-case-with-discards
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5645>
The offset for the VPM write for storing outputs from the geometry
shader isn’t necessarily uniform across all the lanes. This can happen
if some of the lanes don’t emit some of the vertices. In that case the
offset for the subsequent vertices will be different in each lane. In
that case we need to use the stvpmd instruction instead of stvpmv
because it will scatter the values out.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3150
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5621>
Fossilize is really verbose and it's easy to reach the buffer
limit in GitLab CI.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5627>
The shared runners are set up for concurrent jobs ~= CPUs / 4 (x86)
or 8 (ARM).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5627>
Fixes a performance regression in alacritty, and rendering is still
fine in GLQuake ports.
Fixes: 361fb38662 ("panfrost: Copy resources when mapping to avoid waiting for readers")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5642>
This is a 64 bits value that might not be aligned on 32 bit plaforms.
Since it's used with atomics, let's make sure it gets properly aligned
to avoid any potential performance loss.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5637>
last_seqnos is used in atomic operations. Specially on 32 bit platorms,
it tends to be slower if it's not aligned to 64 bits (see
cdc331c6f9). This fixes a small regression
on Bioshock.
Fixes: aba3aed96e ("iris: fix export of GEM handles")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5637>
This was making it so that the CI would error if the set of files modified
or the pipeline involvd meant the jobs we depend on weren't enabled. It
was just some misplaced debug leftovers of mine.
Fixes: b88c46fa11 ("ci: Add a freedreno a630 tracie run.")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5653>
Produced by comparing the traces of:
dEQP-VK.rasterization.culling.front_triangles
dEQP-VK.rasterization.culling.front_triangles_point
dEQP-VK.rasterization.culling.front_triangles_line
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5650>
This job runs in about one minute on the current set of traces, and has
successfully revealed some bugs in our current rendering. Takes about 7
minutes currently.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
Builds the renderdoc and apitrace programs so we can replay GL traces on
DUTs.
[Separated out from 5472's commit that also enabled the jobs in LAVA,
dropped unnecessary python packages from arm_build, fixed up arm64_test
build, traces-db in baremetal, new commit message by anholt]
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
We build in Debian buster but were currently testing in bullseye-based
ramdisks. This has started being a problem since Python 3.7 was removed
from bullseye.
[ Also bumped arm_test containers, by anholt ]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
Note: going by the blob, VFD_INDEX_OFFSET/FD_INSTANCE_START_OFFSET seem
completely unused by indirect draws, so this changes them to only be set
for non-indirect draws (and moves them to the vs_params draw state).
Passes dEQP-VK.draw.shader_draw_parameters.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5635>
This is part of adding VK_KHR_shader_draw_parameters for turnip.
IR3_DP_VTXID_BASE/IR3_DP_VTXCNT_MAX offsets are changed to match what
CP_DRAW_INDIRECT_MULTI requires.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5635>
