Age of Empire IV generates a shader of ~2.3Mb on DG2 which is above
the limit we currently have.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19669>
(cherry picked from commit ae76bba34a878dbd299f911bceaa9acdf01eb38a)
Seems the intention was to check that both flags were not enabled
instead we were checking that the floor flag was both set and not
set so the result would always be false.
Fixes: 3749a6ecd2 ("nir: honor lower_double options for ffloor and ffract")
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19642>
(cherry picked from commit 34c52d8cb98e74a9debcd2605b377170c025582a)
We were resetting the BO struct right before dumping its data. Fix
this by moving the reset later.
Fixes: 44fa8304d4 ('v3dv: add a refcount mechanism to BOs')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19672>
(cherry picked from commit 2c44597181e28b05d4b269ee73d4f3a59bc0a806)
If we're in handle_collect()'s dst allocation and are part of a merge set
near the end of the file, our check for reg_elem_size(reg) would let us
use the preferred reg when that would immediately lead to
allocate_dst_fixed() creating an interval extending thruogh reg_size(reg)
that overflows the file.
Avoids a regression on gfxbench5/gl_5_high_off/17.shader_test in the next
commit. No change on shader-db.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18946>
(cherry picked from commit a39113b616099a7bcce9e62337731f040c7cad64)
If an application was transitioning out of fullscreen exclusive
display mode, the wsi_display_connector->active state was not
reset in vkReleaseDisplay() from fullscreen. When the app then
later tried to go to fullscreen display mode again on the same
display output with the same video mode, this caused
_wsi_display_queue_next() to skip a required drmModeSetCrtc()
during the first vkQueuePresent() after entering direct display
mode.
While this often worked by pure luck on a single-display setup,
it goes sideways on a multi-display setup where the viewport
of the associated crtc does not have a (x,y) offset of (0,0).
E.g., XOrg/X11 RandR output leasing of an output whose viewport
starts at x = 1920:
1. X-Server has RandR outputs viewport at x = 1920, in a shared
framebuffer, shared across all crtc's on a X-Screen.
2. Application leases that output for direct display mode,
1st vkQueuePresent() triggers drmModeSetCrtc() of output
to (x,y) = 0,0, as required for Vulkan/wsi/direct framebuffer
setup.
3. Application does rendering and presenting.
4. Application vkReleaseDisplay() the output, terminates the
RandR lease. X-Server takes over again.
5. X-Server modesets to reconfigure output back to viewport
with (x,y) = 1920, 0.
6. Application leases same output again later on, and tries
vkQueuePresent() again. Because of the bug fixed in this
commit, the required drmModeSetCrtc() to (x,y) = 0,0 is
erroneously skipped due to the stale cached connector state.
7. drmModePageflip() fails due to the wrong crtc viewport
(x,y) = 1920, 0, mismatched for the need of the Vulkan
framebuffer of (x,y) = 0,0. Kernel returns -ENOSPACE,
Swapchain goes into permanent VK_ERROR_SURFACE_LOST state.
Destroying and recreating the swapchain, as recommended
by the Vulkan spec for error handling won't help. Game over!
Resetting wsi_display_connector->active = false; fixes the
problem of wrong / stale connector state and Vulkan/wsi/display
clients are happy on multi-display setups again, as tested
in various single- and multi-display configurations.
This bug affects all Mesa releases with Vulkan/WSI/Display
support and should therefore be backported.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes: 352d320a07 ("vulkan: Add EXT_direct_mode_display [v2]")
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19484>
(cherry picked from commit 24094ee03d625fbcd2d154e8c2dd5434ba88f166)
Implement Wa_1508744258:
Disable RHWO by setting 0x7010[14] by default except during resolve
pass.
Disable the RCC RHWO optimization at all times except when resolving
single sampled color surfaces.
v2: Move stalling to genX(cmd_buffer_apply_pipe_flushes) for clarity (Mark)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: mesa-stable
(cherry picked from commit ba0336ab3f69f958e4346c1465c2fe0859d4ac59)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19671>
Implement Wa_1508744258:
Disable RHWO by setting 0x7010[14] by default except during resolve
pass.
Disable the RCC RHWO optimization at all times except when resolving
single sampled color surfaces. MCS partial resolves are done via
software (i.e., not via a HW bit) and so are not expected to need this
workaround.
Reviewed-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0fa540ef6137aa235f62a0ba60886f64d754566d)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19671>
Some previous commits changed .gitlab-ci.yml, so the `test-docs-mr` was
triggered. It failed due to the lack of toctree reference in
documentation, even when the relnotes for 22.2.0 to 22.2.3 exist.
This commit fixes that to make the CI pipeline green again.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
We don't need to login anymore, but we can't use plain minio commands
now. `ci-fairy` got a helper as `s3cp` to keep an almost identical
API.
Solved Conflicts:
.gitlab-ci/common/init-stage2.sh
.gitlab-ci/container/lava_build.sh
.gitlab-ci/prepare-artifacts.sh
src/amd/ci/traces-amd.yml
src/freedreno/ci/traces-freedreno.yml
src/gallium/frontends/lavapipe/ci/traces-lavapipe.yml
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 67cee534a88c95a8eb6839f7bcf28a5e6dac8fbf)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
ci-fairy is pulverized in possible different versions at Mesa CI.
This commit updates all of them to the version that migrates minio to
s3.
Also, trigger the build of base and test containers, as both uses
ci-fairy as well
Solved Conflicts:
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit a04ed2f971dccbf8b24f084ac9baaf8b299944a0)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
With new S3 support, we can use JWT-only server interaction via the
removal of `role-session` and `minio-host` arguments from PIGLIT_ARGS in
YAML.
This parameter change will come in a later commit.
Solved Conflicts:
.gitlab-ci/container/build-piglit.sh
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 70ce1dcacc92a816322082c8695569b6a91a1810)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
The rootfs generation is failing due to issues with the deqp and crosvm
build stages.
== crosvm ==
This week, crates.io released the bindgen cargo package at version
0.61.0, but this version could not be installed via `cargo install
bindgen ...`, setting the version to the previous one to avoid breaking
the Mesa rootfs builds.
See also related failed job:
https://gitlab.freedesktop.org/gallo/mesa/-/jobs/30046963
== deqp ==
The deqp build is failing due to the missing archive of an old zlib
release version, which was deleted due to a CVE, see zlib 1.2.13 release
notes.
As the deqp uprev to 1.3.4.0, which contains the fix, was not
straightforward, let's only apply the necessary patch to fix zlib
source code download link and then remove this indirection in an
eventual deqp uprev.
Example of a failed kernel+rootfs build job:
https://gitlab.freedesktop.org/gallo/mesa/-/jobs/30045324
Solved Conflicts:
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
(cherry picked from commit db2c14887bb52ec6fd05c5f8b5363f1689b4b45c)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
Stick to macos-11 to prevent accident broken
always install meson with pip to prevent pull new version of python
Cc: mesa-stable
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Acked-by: Eric Engestrom <eric@igalia.com>
Acked-by: Dylan Baker <dylan.c.baker@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19640>
While Panfrost allocates linear images with strides that are a multiple of 64
bytes, other dma-buf producers on the system may not satisfy this requirement.
However, at least on v7 and newer, any image with a regular format must have a
stride that is a multiple of 64 bytes.
This fixes a real bug in an application that created a linear R8_UNORM image
with stride 480 bytes, imported it as an EGL_image, and then tried to texture
from it with the GPU. Previously, the driver allowed this situation but it
resulted in an imprecise fault from the GPU. This patch corrects the driver to
reject the import as invalid due to the unaligned stride, ensuring we never
attempt to texture from such a resource.
To implement, we add some new layout queries to centralize knowledge about the
stride alignment requirements, and we sprinkle in asserts to show how the
invariant is upheld throughout the lifecycle of image creation to texturing.
Cc: mesa-stable
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19620>
(cherry picked from commit 811f8a19469722bea32f3c539b8cf0939fe3b057)
This can cause us to stomp the contents of r5 before we have a chance to read
it, like this:
0x3d103186bb800000 nop ; nop ; ldvary.r0
0x3d105686bbf40000 nop ; mov rf26, r5 ; ldvary.r1
0x020000ef0000d000 bu.allna 232, r:unif (0x0000001c / 0.000000)
0x3d1096c6bbf40000 nop ; mov rf27, r5 ; ldvary.r2
Here, the MOV in the last instruction is supposed to read r5 produced from
ldvary.r0, but because we have inserted the bu instruction in between now
that read happens at the same time that ldvary.r1 updates r5, stomping the
value we were supposed to read.
Fix this by disallowing injection of a branch instruction in between an ldvary
instruction and its write to the r5 register 2 instructions later.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7062
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19616>
(cherry picked from commit 1174f376096ed6ceebb0fb2810456f1501a68df7)
If the map doesn't set MAP_DISCARD_RANGE, we do have to copy the existing
contents over. MAP_WRITE on its only gives permission to replace the contents,
unfortunately it does not require that the application actually do so.
Closes: #7640
Fixes: 0b26a9f7739 ("panfrost: Don't copy resources if replaced")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reported-by: Roman Elshin
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19576>
(cherry picked from commit cf7a3906b0629b2b6aadd3b18a39eae06b10fd6a)
Fixes issue with "is helper invocation" that in recent SPIR-V is mapped to
a volatile Load. The CSE was catching the loads before they were transformed
in the new is_helper_invocation intrinsic (that is not reorderable).
Fixes: 729df14e45 ("nir: Handle volatile semantics for loading HelperInvocation builtin")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: M Henning <drawoc@darkrefraction.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19432>
(cherry picked from commit 8ab628ab2e4d4f460e2eabdb11876997c0ab13bc)
Don't copy propagate the constant in situations like
mov(8) g8<1>D 0x7fffffffD
mul(8) g16<1>D g8<8,8,1>D g15<16,8,2>W
On platforms that only have a 32x16 multiplier, this will result in
lowering the multiply to
mul(8) g15<1>D g14<8,8,1>D 0xffffUW
mul(8) g16<1>D g14<8,8,1>D 0x7fffUW
add(8) g15.1<2>UW g15.1<16,8,2>UW g16<16,8,2>UW
On Gfx8 and Gfx9, which have the full 32x32 multiplier, it results in
mul(8) g16<1>D g15<16,8,2>W 0x7fffffffD
Volume 2a of the Skylake PRM says:
When multiplying a DW and any lower precision integer, the
DW operand must on src0.
See also https://gitlab.freedesktop.org/mesa/crucible/-/merge_requests/104.
Previous to INTEL_shader_integer_functions2 (in Vulkan or OpenGL), I
don't think it would be possible to create a situation where this could
occur. I discovered this via some optimizations that can determine that
the non-constant source must be able to fit in 16-bits. The case listed
above came from piglit's "ext_transform_feedback-order arrays points"
with those optimizations in place.
No shader-db or fossil-db changes on any Intel platform.
Fixes: de6c0f8487 ("intel/fs: Implement support for NIR opcodes for INTEL_shader_integer_functions2")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17718>
(cherry picked from commit db204121686726c74dd0aba2d1c1790d40e7baba)
This patch filters-out '-std=gnu++14' from the cflags obtained
from AOSP/KATI dummy target output to avoid the following building errors:
FAILED: src/gallium/drivers/r600/45f68e3@@r600@sta/sfn_sfn_assembler.cpp.o
...
clang++ ... -std=c++17 ... -std=gnu++14
...
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.cpp:27:
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.h:32:
In file included from ../src/gallium/drivers/r600/sfn/sfn_shader.h:31:
../src/gallium/drivers/r600/sfn/sfn_instr.h:369:56: error: no template named 'is_base_of_v' in namespace 'std'; did you mean 'is_base_of'?
template <typename T, typename = std::enable_if_t<std::is_base_of_v<Instr, T>>>
~~~~~^~~~~~~~~~~~
is_base_of
/home/utente/pie-x86_kernel/external/libcxx/include/type_traits:1412:29: note: 'is_base_of' declared here
struct _LIBCPP_TEMPLATE_VIS is_base_of
^
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.cpp:27:
In file included from ../src/gallium/drivers/r600/sfn/sfn_assembler.h:32:
In file included from ../src/gallium/drivers/r600/sfn/sfn_shader.h:31:
../src/gallium/drivers/r600/sfn/sfn_instr.h:369:51: error: template argument for non-type template parameter must be an expression
template <typename T, typename = std::enable_if_t<std::is_base_of_v<Instr, T>>>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/utente/pie-x86_kernel/external/libcxx/include/type_traits:439:16: note: template parameter is declared here
template <bool _Bp, class _Tp = void> using enable_if_t = typename enable_if<_Bp, _Tp>::type;
^
2 errors generated.
Cc: "22.2" "22.3" mesa-stable
Reviewed-by: Roman Stratiienko <r.stratiienko@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19563>
(cherry picked from commit fd8ec189e575d5220d8b4c30647fa6de57928e07)
While the GC880 is HALTI0, it still uses the old set of state registers
for PE pipe configuration. This is another specialty of the GC880, readd
the missing handling for this GPU otherwise e.g. Qt5 cube example suffers
from rendering corruption with both eglfs and wayland backends.
Fixes: 7c46a48836 ("etnaviv: use new PE pipe address states on >= HALTI0")
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19562>
(cherry picked from commit 20984aab0f6717f5fbf79fc21c2c5f442472b605)
Currently float16 to int64 conversions don't work correctly, because
the "div" variable has an infinite value, since 2^32 isn't
representable as a 16-bit float, which causes the result of of rem(x,
div) to be NaN for all inputs, leading to an incorrect result. Since
no values of magnitude greater than 2^32 are representable as a
float16 we don't actually need to do the fdiv/frem operations, the
conversion is equivalent to f2u32 with the result padded to 64 bits.
Rework:
* Jordan: Handle f16 in if/else rather than conditional
Fixes: 936c58c8fc ("nir: Extend nir_lower_int64() to support i2f/f2i lowering")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19391>
(cherry picked from commit e14f85366ebbc57f45d2561e0d3f0804f8adb549)
`pred` is a pointer, for sufficiently large numbers these
being cast to int were both > 0 regardless of the order
of `data1` and `data2`.
Fixes: 523a28d3fe ("nir: add an instruction set API")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19539>
(cherry picked from commit c987a727a76eda1feada07e2eca6a5597dbddd93)
These leaks on device creation failure have been there before, but
were only exposed as CTS failures after the recent event refactoring.
Partially fixes:
dEQP-VK.api.device_init.create_instance_device_intentional_alloc_fail.basic
dEQP-VK.api.object_management.alloc_callback_fail.device
dEQP-VK.api.object_management.alloc_callback_fail.device_group
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19458>
(cherry picked from commit b78fd50e90c700466213e4b3b40ce10547b1e14e)
Copied wrong from radeonsi. The registers following the scratch
buffer address are the shader rsrc1/rsrc2. Not the user SGPR0
containing the ring resource word 1.
Fixes: 278e533ec9 ("radv: update scratch buffer registers on GFX11")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19488>
(cherry picked from commit b8865ad04643cd7e8faa8a863d81fedbc1e29231)
The entire point of resource shadowing is to avoid unnecessary flushing.
Flushing readers after shadowing is counterproductive. A refresher on
how resource shadowing is supposed to work:
First, we determine if it's beneficial to shadow resources. If so, we
create a new backing buffer object. We flush the current writer of the
resource, if there is one, so the current contents become known to the
CPU. If we are not discarding the original resource, we then copy the
existing contents of the buffer to the new shadow buffer on the CPU.
Finally, we swap the resource's backing buffer for our shadow. Any batch
that reads the resource will continue to read the old copy of the
resource, and any future draw calls will see the new copy with the
change implemented.
Where did we go wrong?
In 988d5aae74 ("panfrost: Flush resources when shadowing"), we started
flushing all readers. We didn't actually need to flush, we just needed
to avoid dangling references on the batches reading the old copy of the
resource. But that's easily enough avoided: just remove the references.
The batches still hold a reference to the underlying BO, which will be
freed at the right time regardless.
Originally motivated by glmark2 -bbuffer:update-method=subdata, which
has some pathological access paterns.
Firefox is a lot faster anecdotally (now scrolling at 60fps in firefox).
But what actually motivated this is an apitrace from Duckstation's GLES
renderer. With this patch, the in-game portion is improved 3fps to 21fps.
Closes: #4028
Fixes: 988d5aae74 ("panfrost: Flush resources when shadowing")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19361>
(cherry picked from commit 2d8f28df731638e1270b0ae273c7bfd2b29b7993)
If a synchronized transfer_map is going to overwrite an entire resource,
there's no need to memcpy in the original contents ahead-of-time. This
memcpy is particularly bad for large buffers where it's copying WC->WC,
although that could be mitigated with threaded_context's cpu_storage in
the future if needed.
Prevents a performance regression in glmark2's buffer scenes from the
next patch, hence the Cc.
Cc: mesa-stable
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19361>
(cherry picked from commit 0b26a9f773956fc00a77b0d4a7aafee5795ce935)
To match PIPE_COMPUTE_CAP_MAX_THREADS_PER_BLOCK, having it be higher in any
dimension is nonsensical and can confuse apps. Fixes tests in
KHR-GLES31.core.texture_buffer.* on Mali-T860.
Fixes: 9b19104a30b ("pan/mdg: Lower PIPE_COMPUTE_CAP_MAX_THREADS_PER_BLOCK on Midgard")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19238>
(cherry picked from commit 027ee6c9e9c20033d0afb3c65684573f286072c7)
