try to downgrade Arc -> Lrc -> Rc -> no-Rc in few places
Expecting this be not slower on non-parallel compiler and probably faster on parallel (checked that this PR builds on it).
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Add `ConstParamTy` trait
This is a bit sketch, but idk.
r? `@BoxyUwU`
Yet to be done:
- [x] ~~Figure out if it's okay to implement `StructuralEq` for primitives / possibly remove their special casing~~ (it should be okay, but maybe not in this PR...)
- [ ] Maybe refactor the code a little bit
- [x] Use a macro to make impls a bit nicer
Future work:
- [ ] Actually™ use the trait when checking if a `const` generic type is allowed
- [ ] _Really_ refactor the surrounding code
- [ ] Refactor `marker.rs` into multiple modules for each "theme" of markers
Make `mem::replace` simpler in codegen
Since they'd mentioned more intrinsics for simplifying stuff recently,
r? `@WaffleLapkin`
This is a continuation of me looking at foundational stuff that ends up with more instructions than it really needs. Specifically I noticed this one because `Range::next` isn't MIR-inlining, and one of the largest parts of it is a `replace::<usize>` that's a good dozen instructions instead of the two it could be.
So this means that `ptr::write` with a `Copy` type no longer generates worse IR than manually dereferencing (well, at least in LLVM -- MIR still has bonus pointer casts), and in doing so means that we're finally down to just the two essential `memcpy`s when emitting `mem::replace` for a large type, rather than the bonus-`alloca` and three `memcpy`s we emitted before this ([or the 6 we currently emit in 1.69 stable](https://rust.godbolt.org/z/67W8on6nP)). That said, LLVM does _usually_ manage to optimize the extra code away. But it's still nice for it not to have to do as much, thanks to (for example) not going through an `alloca` when `replace`ing a primitive like a `usize`.
(This is a new intrinsic, but one that's immediately lowered to existing MIR constructs, so not anything that MIRI or the codegen backends or MIR semantics needs to do work to handle.)
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
Add `intrinsics::transmute_unchecked`
This takes a whole 3 lines in `compiler/` since it lowers to `CastKind::Transmute` in MIR *exactly* the same as the existing `intrinsics::transmute` does, it just doesn't have the fancy checking in `hir_typeck`.
Added to enable experimenting with the request in <https://github.com/rust-lang/rust/pull/106281#issuecomment-1496648190> and because the portable-simd folks might be interested for dependently-sized array-vector conversions.
It also simplifies a couple places in `core`.
See also https://github.com/rust-lang/rust/pull/108442#issuecomment-1474777273, where `CastKind::Transmute` was added having exactly these semantics before the lang meeting (which I wasn't in) independently expressed interest.
This takes a whole 3 lines in `compiler/` since it lowers to `CastKind::Transmute` in MIR *exactly* the same as the existing `intrinsics::transmute` does, it just doesn't have the fancy checking in `hir_typeck`.
Added to enable experimenting with the request in <https://github.com/rust-lang/rust/pull/106281#issuecomment-1496648190> and because the portable-simd folks might be interested for dependently-sized array-vector conversions.
It also simplifies a couple places in `core`.
Make `impl Debug for Span` not panic on not having session globals.
I hit the panic that this patch avoids while messing with the early lints in `rustc_session::config::build_session_options()`. The rest of that project is not finished, but this seemed like a self-contained improvement.
(Should changes like this add tests? I don't see similar unit tests.)
Encode hashes as bytes, not varint
In a few places, we store hashes as `u64` or `u128` and then apply `derive(Decodable, Encodable)` to the enclosing struct/enum. It is more efficient to encode hashes directly than try to apply some varint encoding. This PR adds two new types `Hash64` and `Hash128` which are produced by `StableHasher` and replace every use of storing a `u64` or `u128` that represents a hash.
Distribution of the byte lengths of leb128 encodings, from `x build --stage 2` with `incremental = true`
Before:
```
( 1) 373418203 (53.7%, 53.7%): 1
( 2) 196240113 (28.2%, 81.9%): 3
( 3) 108157958 (15.6%, 97.5%): 2
( 4) 17213120 ( 2.5%, 99.9%): 4
( 5) 223614 ( 0.0%,100.0%): 9
( 6) 216262 ( 0.0%,100.0%): 10
( 7) 15447 ( 0.0%,100.0%): 5
( 8) 3633 ( 0.0%,100.0%): 19
( 9) 3030 ( 0.0%,100.0%): 8
( 10) 1167 ( 0.0%,100.0%): 18
( 11) 1032 ( 0.0%,100.0%): 7
( 12) 1003 ( 0.0%,100.0%): 6
( 13) 10 ( 0.0%,100.0%): 16
( 14) 10 ( 0.0%,100.0%): 17
( 15) 5 ( 0.0%,100.0%): 12
( 16) 4 ( 0.0%,100.0%): 14
```
After:
```
( 1) 372939136 (53.7%, 53.7%): 1
( 2) 196240140 (28.3%, 82.0%): 3
( 3) 108014969 (15.6%, 97.5%): 2
( 4) 17192375 ( 2.5%,100.0%): 4
( 5) 435 ( 0.0%,100.0%): 5
( 6) 83 ( 0.0%,100.0%): 18
( 7) 79 ( 0.0%,100.0%): 10
( 8) 50 ( 0.0%,100.0%): 9
( 9) 6 ( 0.0%,100.0%): 19
```
The remaining 9 or 10 and 18 or 19 are `u64` and `u128` respectively that have the high bits set. As far as I can tell these are coming primarily from `SwitchTargets`.
Remove some suspicious cast truncations
These truncations were added a long time ago, and as best I can tell without a perf justification. And with rust-lang/rust#110410 it has become perf-neutral to not truncate anymore. We worked hard for all these bits, let's use them.
Add inline assembly support for m68k
I believe this should be correct, to the extent I understand the logic around inline assembly. M68k is fairly straightforward here, other than having separate address registers.
Split out a separate feature gate for impl trait in associated types
in https://github.com/rust-lang/rust/issues/107645 it was decided that we'll take a new route for type alias impl trait. The exact route isn't clear yet, so while I'm working on implementing some of these proposed changes (e.g. in https://github.com/rust-lang/rust/pull/110010) to be able to experiment with them, I will also work on stabilizing another sugar version first: impl trait in associated types. Similarly I'll look into creating feature gates for impl trait in const/static types.
This PR does nothing but split the feature gate, so that you need to enable a different feature gate for
```rust
impl Trait for Type {
type Assoc = impl SomeTrait;
}
```
than what you need for `type Foo = impl SomeTrait;`
Add ability to transmute (somewhat) with generic consts in arrays
Previously if the expression contained generic consts and did not have a directly equivalent type, transmuting the type in this way was forbidden, despite the two sizes being identical. Instead, we should be able to lazily tell if the two consts are identical, and if so allow them to be transmuted.
This is done by normalizing the forms of expressions into sorted order of multiplied terms, which is not generic over all expressions, but should handle most cases.
This allows for some _basic_ transmutations between types that are equivalent in size without requiring additional stack space at runtime.
I only see one other location at which `SizeSkeleton` is being used, and it checks for equality so this shouldn't affect anywhere else that I can tell.
See [this Stackoverflow post](https://stackoverflow.com/questions/73085012/transmute-nested-const-generic-array-rust) for what was previously necessary to convert between types. This PR makes converting nested `T -> [T; 1]` transmutes possible, and `[uB*2; N] -> [uB; N * 2]` possible as well.
I'm not sure whether this is something that would be wanted, and if it is it definitely should not be insta-stable, so I'd add a feature gate.
bors