This PR implements part of the add bit instruction synonym transformation.
For now, the implementation covers the OpBitwiseOr, OpBitwiseXor and
OpBitwiseAnd cases.
Adds an optimization pass to remove usages of AtomicCounterMemory
bit. This bit is ignored in Vulkan environments and outright forbidden
in WebGPU ones.
Fixes#2242
Validate that debugging instructions are not present for WebGPU
For WebGPU execution environments, check that all of the debug
instructions have already been stripped before validation.
Fixes#2063
Consider atomics that load when analyzing live stores in ADCE.
Previously it asserted that the base of an OpImageTexelPointer should
be an image. It is actually a pointer to an image, so IsValidBasePointer
should suffice.
Introduce a pass that does a DCE type analysis for vector elements
instead of the whole vector as a single element.
It will then rewrite instructions that are not used with something else.
For example, an instruction whose value are not used, even though it is
referenced, is replaced with an OpUndef.
* Adds new pass for validating non-uniform group instructions
* Currently on checks execution scope for Vulkan 1.1 and SPIR-V 1.3
* Added test framework
Previously we keep a separate static grammar table for opcodes/
operands per SPIR-V version. This commit changes that to use a
single unified static grammar table for opcodes/operands.
This essentially changes how grammar facts are queried against
a certain target environment. There are only limited filtering
according to the desired target environment; a symbol is
considered as available as long as:
1. The target environment satisfies the minimal requirement of
the symbol; or
2. There is at least one extension enabling this symbol.
Note that the second rule assumes the extension enabling the
symbol is indeed requested in the SPIR-V code; checking that
should be the validator's work.
Also fixed a few grammar related issues:
* Rounding mode capability requirements are moved to client APIs.
* Reserved symbols not available in any extension is no longer
recognized by assembler.
A few optimizations are updates to handle code that is suppose to be
using the logical addressing mode, but still has variables that contain
pointers as long as the pointer are to opaque objects. This is called
"relaxed logical addressing".
|Instruction::GetBaseAddress| will check that pointers that are use meet
the relaxed logical addressing rules. Optimization that now handle
relaxed logical addressing instead of logical addressing are:
- aggressive dead-code elimination
- local access chain convert
- local store elimination passes.
This class implements a generic value propagation algorithm based on the
conditional constant propagation algorithm proposed in
Constant propagation with conditional branches,
Wegman and Zadeck, ACM TOPLAS 13(2):181-210.
The implementation is based on
A Propagation Engine for GCC
Diego Novillo, GCC Summit 2005
http://ols.fedoraproject.org/GCC/Reprints-2005/novillo-Reprint.pdf
The purpose of this implementation is to act as a common framework for any
transformation that needs to propagate values from statements producing new
values to statements using those values.
Creates a pass that removes redundant instructions within the same basic
block. This will be implemented using a hash based value numbering
algorithm.
Added a number of functions that check for the Vulkan descriptor types.
These are used to determine if we are variables are read-only or not.
Implemented a function to check if loads and variables are read-only.
Implemented kernel specific and shader specific versions.
A big change is that the Combinator analysis in ADCE is factored out
into the IRContext as an analysis. This was done because it is being
reused in the value number table.
To make the decoration manger available everywhere, and to reduce the
number of times it needs to be build, I add one the IRContext.
As the same time, I move code that modifies decoration instruction into
the IRContext from mempass and the decoration manager. This will make
it easier to keep everything up to date.
This should take care of issue #928.
If the variable_pointer extension is used:
* OpLoad's pointer argument may be the result of any of the following:
* OpSelect
* OpPhi
* OpFunctionCall
* OpPtrAccessChain
* OpCopyObject
* OpLoad
* OpConstantNull
* Return value of a function may be a pointer.
* It is valid to use a pointer as the return value of a function.
* OpStore should allow a variable pointer argument.
Use libspirv::CapabilitySet instead of a 64-bit mask.
Remove dead function spvOpcodeRequiresCapability and its tests.
The JSON grammar parser is simplified since it just writes the
list of capabilities as a braced list, and takes advantage of
the CapabilitySet intializer-list constructor.
* ValidationState_t and idUsage now store the addressing model and memory model of the SPIR-V module (this is necessary for certain instructions that need different checks depending on if the logical or physical addressing model is used)
* removed SpvOpPtrAccessChain and SpvOpInBoundsPtrAccessChain from spvOpcodeIsPointer again as these are disallowed in logical addressing mode and only allowed in physical addressing mode (which doesn't use/need spvOpcodeIsPointer in the first place)
* added SpvOpImageTexelPointer and SpvOpCopyObject to spvOpcodeIsPointer
* OpLoad/OpStore now only check if the used pointer operand originated from a valid pointer producing opcode in logical addressing mode (as per 2.16.1)
* moved bitcast pointer tests to the kernel / physical addressing model part (+cleanup)
* renamed spvOpcodeIsPointer to spvOpcodeReturnsLogicalPointer to clarify this function is only meant to be used with the logical addressing model
For fulfilling this purpose, the |opcode| field in the
|spv_parsed_instruction_t| struct is changed to of type uint16_t.
Also add functions to query the information of a given SPIR-V
target environment.
Now we have public headers arranged as follows:
$SPIRV_TOOLS_ROOT/include/spirv-tools/libspirv.h
$SPIRV_TOOLS_ROOT/include/spirv/spirv.h
$SPIRV_TOOLS_ROOT/include/spirv/GLSL.std.450.h
$SPIRV_TOOLS_ROOT/include/spirv/OpenCL.std.h
A project should use -I$SPIRV_TOOLS_ROOT/include
and then #include "spirv-tools/libspirv.h"
The headers from the SPIR-V Registry can be accessed as "spirv/spirv."
for example.
The install target should also install the headers from the SPIR-V
Registry. The libspirv.h header is broken otherwise.
The SPIRV-Tools library depends on the headers from the SPIR-V Registry.
The util/bitutils.h and util/hex_float.h are pulled into the internal
source tree. Those are not part of the public API to SPIRV-Tools.
Also
- Add type_id to spv_id_info_t.
- Use spv_id_info_t::type_id instead of words[1].
Triggered some asserts on tests, where the code incorrectly assumed
words[1] had a type. Remove the asserts and handle gracefully.
- Add tests for OpStore of a label, a void, and a function.
Note that we are more strict than Google style for one aspect:
pointer/reference indicators are adjacent to their types, not
their variables.
find . -name "*.h" -exec clang-format -i {} \;
find . -name "*.cpp" -exec clang-format -i {} \;
huruitao