openharmony/third_party_wpa_supplicant
1
0
Fork 0
mirror of https://gitee.com/openharmony/third_party_wpa_supplicant synced 2024-11-23 07:40:06 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add OAT file.

Browse Source 
Signed-off-by: maoyufeng <maoyufeng3@huawei.com>
This commit is contained in:
maoyufeng 2021-08-04 10:30:35 +08:00
parent 2c9fdf0648
commit 07b1638ab0
3 changed files with 253 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

171
CONTRIBUTIONS Normal file
View File

@ -0,0 +1,171 @@
Contributions to hostap.git
---------------------------
This software is distributed under a permissive open source license to
allow it to be used in any projects, whether open source or proprietary.
Contributions to the project are welcome and it is important to maintain
clear record of contributions and terms under which they are licensed.
To help with this, following procedure is used to allow acceptance and
recording of the terms.
All contributions are expected to be licensed under the modified BSD
license (see below). Acknowledgment of the terms is tracked through
inclusion of Signed-off-by tag in the contributions at the end of the
commit log message. This tag indicates that the contributor agrees with
the Developer Certificate of Origin (DCO) version 1.1 terms (see below;
also available from http://developercertificate.org/).
The current requirements for contributions to hostap.git
--------------------------------------------------------
To indicate your acceptance of Developer's Certificate of Origin 1.1
terms, please add the following line to the end of the commit message
for each contribution you make to the project:
Signed-off-by: Your Name <your@email.example.org>
using your real name. Pseudonyms or anonymous contributions cannot
unfortunately be accepted.
The preferred method of submitting the contribution to the project is by
email to the hostap mailing list:
hostap@lists.infradead.org
Note that the list may require subscription before accepting message
without moderation. You can subscribe to the list at this address:
http://lists.infradead.org/mailman/listinfo/hostap
The message should contain an inlined patch against the current
development branch (i.e., the master branch of
git://w1.fi/hostap.git). Please make sure the software you use for
sending the patch does not corrupt whitespace. If that cannot be fixed
for some reason, it is better to include an attached version of the
patch file than just send a whitespace damaged version in the message
body.
The patches should be separate logical changes rather than doing
everything in a single patch. In other words, please keep cleanup, new
features, and bug fixes all in their own patches. Each patch needs a
commit log that describes the changes (what the changes fix, what
functionality is added, why the changes are useful, etc.).
Please try to follow the coding style used in the project.
In general, the best way of generating a suitable formatted patch file
is by committing the changes to a cloned git repository and using git
format-patch. The patch can then be sent, e.g., with git send-email.
History of license and contributions terms
------------------------------------------
Until February 11, 2012, in case of most files in hostap.git, "under the
open source license indicated in the file" means that the contribution
is licensed both under GPL v2 and modified BSD license (see below) and
the choice between these licenses is given to anyone who redistributes
or uses the software. As such, the contribution has to be licensed under
both options to allow this choice.
As of February 11, 2012, the project has chosen to use only the BSD
license option for future distribution. As such, the GPL v2 license
option is no longer used and the contributions are not required to be
licensed until GPL v2. In case of most files in hostap.git, "under the
open source license indicated in the file" means that the contribution
is licensed under the modified BSD license (see below).
Until February 13, 2014, the project used an extended version of the DCO
that included the identical items (a) through (d) from DCO 1.1 and an
additional item (e):
(e) The contribution can be licensed under the modified BSD license
as shown below even in case of files that are currently licensed
under other terms.
This was used during the period when some of the files included the old
license terms. Acceptance of this extended DCO version was indicated
with a Signed-hostap tag in the commit message. This additional item (e)
was used to collect explicit approval to license the contribution with
only the modified BSD license (see below), i.e., without the GPL v2
option. This was done to allow simpler licensing terms to be used in the
future. It should be noted that the modified BSD license is compatible
with GNU GPL and as such, this possible move to simpler licensing option
does not prevent use of this software in GPL projects.
===[ start quote from http://developercertificate.org/ ]=======================
Developer Certificate of Origin
Version 1.1
Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
660 York Street, Suite 102,
San Francisco, CA 94110 USA
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
===[ end quote from http://developercertificate.org/ ]=========================
The license terms used for hostap.git files
-------------------------------------------
Modified BSD license (no advertisement clause):
Copyright (c) 2002-2019, Jouni Malinen <j@w1.fi> and contributors
All Rights Reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

22
COPYING Normal file
View File

@ -0,0 +1,22 @@
wpa_supplicant and hostapd
--------------------------
Copyright (c) 2002-2019, Jouni Malinen <j@w1.fi> and contributors
All Rights Reserved.
See the README file for the current license terms.
This software was previously distributed under BSD/GPL v2 dual license
terms that allowed either of those license alternatives to be
selected. As of February 11, 2012, the project has chosen to use only
the BSD license option for future distribution. As such, the GPL v2
license option is no longer used. It should be noted that the BSD
license option (the one with advertisement clause removed) is compatible
with GPL and as such, does not prevent use of this software in projects
that use GPL.
Some of the files may still include pointers to GPL version 2 license
terms. However, such copyright and license notifications are maintained
only for attribution purposes and any distribution of this software
after February 11, 2012 is no longer under the GPL v2 option.

60
OAT.xml Normal file
View File

@ -0,0 +1,60 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- Copyright (c) 2021 Huawei Device Co., Ltd.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
This is the configuration file template for OpenHarmony OSS Audit Tool, please copy it to your project root dir and modify it refer to OpenHarmony/tools_oat/README.
All configurations in this file will be merged to OAT-Default.xml, if you have any questions or concerns, please create issue in OpenHarmony/tools_oat and @jalenchen or chenyaxun.
licensefile:
1.If the project don't have "LICENSE" in root dir, please define all the license files in this project in , OAT will check license files according to this rule.
policylist:
1. policy: If the OAT-Default.xml policies do not meet your requirements, please add policies here.
2. policyitem: The fields type, name, path, desc is required, and the fields rule, group, filefilter is optional,the default value is:
<policyitem type="" name="" path="" desc="" rule="may" group="defaultGroup" filefilter="defaultPolicyFilter"/>
3. policyitem type:
"compatibility" is used to check license compatibility in the specified path;
"license" is used to check source license header in the specified path;
"copyright" is used to check source copyright header in the specified path;
"import" is used to check source dependency in the specified path, such as import ... ,include ...
"filetype" is used to check file type in the specified path, supported file types: archive, binary
"filename" is used to check whether the specified file exists in the specified path(projectroot means the root dir of the project), supported file names: LICENSE, README, README.OpenSource
4. policyitem name: This field is used for define the license, copyright, "*" means match all, the "!" prefix means could not match this value. For example, "!GPL" means can not use GPL license.
5. policyitem path: This field is used for define the source file scope to apply this policyitem, the "!" prefix means exclude the files. For example, "!.*/lib/.*" means files in lib dir will be exclude while process this policyitem.
6. policyitem rule and group: These two fields are used together to merge policy results. "may" policyitems in the same group means any one in this group passed, the result will be passed.
7. policyitem filefilter: Used to bind filefilter which define filter rules.
7. policyitem desc: Used to describe the reason of this policy item, committers will check this while merging the code.
8. filefilter: Filter rules, the type filename is used to filter file name, the type filepath is used to filter file path.
Note:If the text contains special characters, please escape them according to the following rules:
" == &gt;
& == &gt;
' == &gt;
< == &gt;
> == &gt;
-->
<configuration>
<oatconfig>
<licensefile>COPYING</licensefile>
<filefilterlist>
<filefilter name="defaultFilter" desc="Files not to check">
<filteritem type="filename" name="CONTRIBUTIONS" desc="Description files."/>
<filteritem type="filename" name="COPYING" desc="Copying files."/>
<filteritem type="filename" name="hostapd" desc="hostapd script, use BSD license."/>
<filteritem type="filename" name="radiotap.*" desc="This file use BSD license."/>
</filefilter>
</filefilterlist>
</oatconfig>
</configuration>