reactos/CMake
1
0
Fork 0
mirror of https://github.com/reactos/CMake.git synced 2024-12-13 22:58:41 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
5c724c4ca8
CMake/Modules/FindQt3.cmake

294 lines
8.9 KiB
CMake
Raw Normal View History

Simplify CMake per-source license notices Per-source copyright/license notice headers that spell out copyright holder names and years are hard to maintain and often out-of-date or plain wrong. Precise contributor information is already maintained automatically by the version control tool. Ultimately it is the receiver of a file who is responsible for determining its licensing status, and per-source notices are merely a convenience. Therefore it is simpler and more accurate for each source to have a generic notice of the license name and references to more detailed information on copyright holders and full license terms. Our `Copyright.txt` file now contains a list of Contributors whose names appeared source-level copyright notices. It also references version control history for more precise information. Therefore we no longer need to spell out the list of Contributors in each source file notice. Replace CMake per-source copyright/license notice headers with a short description of the license and links to `Copyright.txt` and online information available from "https://cmake.org/licensing". The online URL also handles cases of modules being copied out of our source into other projects, so we can drop our notices about replacing links with full license text. Run the `Utilities/Scripts/filter-notices.bash` script to perform the majority of the replacements mechanically. Manually fix up shebang lines and trailing newlines in a few files. Manually update the notices in a few files that the script does not handle.
2016-09-27 19:01:08 +00:00
# Distributed under the OSI-approved BSD 3-Clause License. See accompanying
# file Copyright.txt or https://cmake.org/licensing for details.
Convert builtin help to reStructuredText source files Run the convert-help.bash script to convert documentation: ./convert-help.bash "/path/to/CMake-build/bin" Then remove it.
2013-10-15 15:17:36 +00:00
#.rst:
# FindQt3
# -------
#
# Locate Qt include paths and libraries
#
ENH: fix module documenation to handle bad docs and fix qt3 docs
2005-12-15 14:19:23 +00:00
# This module defines:
#
Convert builtin help to reStructuredText source files Run the convert-help.bash script to convert documentation: ./convert-help.bash "/path/to/CMake-build/bin" Then remove it.
2013-10-15 15:17:36 +00:00
# ::
#
# QT_INCLUDE_DIR - where to find qt.h, etc.
# QT_LIBRARIES - the libraries to link against to use Qt.
# QT_DEFINITIONS - definitions to use when
# compiling code that uses Qt.
# QT_FOUND - If false, don't try to use Qt.
# QT_VERSION_STRING - the version of Qt found
#
#
#
# If you need the multithreaded version of Qt, set QT_MT_REQUIRED to
# TRUE
ENH: fix module documenation to handle bad docs and fix qt3 docs
2005-12-15 14:19:23 +00:00
#
# Also defined, but not for general use are:
Convert builtin help to reStructuredText source files Run the convert-help.bash script to convert documentation: ./convert-help.bash "/path/to/CMake-build/bin" Then remove it.
2013-10-15 15:17:36 +00:00
#
# ::
#
# QT_MOC_EXECUTABLE, where to find the moc tool.
# QT_UIC_EXECUTABLE, where to find the uic tool.
# QT_QT_LIBRARY, where to find the Qt library.
# QT_QTMAIN_LIBRARY, where to find the qtmain
# library. This is only required by Qt3 on Windows.
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
# These are around for backwards compatibility
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# they will be set
ENH: add documentation support for modules
2005-12-14 18:51:08 +00:00
# QT_WRAP_CPP, set true if QT_MOC_EXECUTABLE is found
# QT_WRAP_UI set true if QT_UIC_EXECUTABLE is found
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
BUG: fix #7447, FindModulesExecuteAll test fails if both Qt3 and KDE4 can be found in the system Qt3 and Qt4 cannot be used together in one project. Now Qt3/KDE3 and Qt4/KDE4 handle the case that this is done nevertheless properly, i.e. they fail with FATAL_ERROR if it was REQUIRED and they fail with just MESSAGE(STATUS ...) and RETURN() if it was not REQUIRED BUG: make FindQt4 error out with FATAL_ERROR also if it was searched QUIET Alex
2008-08-16 23:11:53 +00:00
# If Qt4 has already been found, fail.
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT4_FOUND)
if(Qt3_FIND_REQUIRED)
message( FATAL_ERROR "Qt3 and Qt4 cannot be used together in one project.")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
else()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(NOT Qt3_FIND_QUIETLY)
message( STATUS "Qt3 and Qt4 cannot be used together in one project.")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
return()
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
endif()
BUG: fix #7447, FindModulesExecuteAll test fails if both Qt3 and KDE4 can be found in the system Qt3 and Qt4 cannot be used together in one project. Now Qt3/KDE3 and Qt4/KDE4 handle the case that this is done nevertheless properly, i.e. they fail with FATAL_ERROR if it was REQUIRED and they fail with just MESSAGE(STATUS ...) and RETURN() if it was not REQUIRED BUG: make FindQt4 error out with FATAL_ERROR also if it was searched QUIET Alex
2008-08-16 23:11:53 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
file(GLOB GLOB_PATHS /usr/lib/qt-3*)
foreach(GLOB_PATH ${GLOB_PATHS})
list(APPEND GLOB_PATHS_BIN "${GLOB_PATH}/bin")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endforeach()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
find_path(QT_INCLUDE_DIR qt.h
ENH: clean up the find qt stuff some
2005-09-10 01:51:23 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]/include/Qt"
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
$ENV{QTDIR}/include
FindQt3: fix detection of Qt3 include directory The include directory is likely not inside ../bin
2012-03-02 16:31:34 +00:00
${GLOB_PATHS}
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
/usr/share/qt3/include
C:/Progra~1/qt/include
OpenBSD: Add paths for Qt3/Qt4 Handle OpenBSD specific paths in Qt3/Qt4, allowing concurrent building and installation. Some common programs are renamed with suffixes of either 3 or 4. Also, allow qt3/qt4 installed under /usr/local to be searched and recognized appropriately.
2012-12-05 17:36:14 +00:00
/usr/local/include/X11/qt3
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
PATH_SUFFIXES lib/qt/include lib/qt3/include include/qt include/qt3 qt/include qt3/include
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
ENH: try to fix non-clean dashboards
2006-03-06 19:08:15 +00:00
# if qglobal.h is not in the qt_include_dir then set
# QT_INCLUDE_DIR to NOTFOUND
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(NOT EXISTS ${QT_INCLUDE_DIR}/qglobal.h)
set(QT_INCLUDE_DIR QT_INCLUDE_DIR-NOTFOUND CACHE PATH "path to Qt3 include directory" FORCE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: try to fix non-clean dashboards
2006-03-06 19:08:15 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_INCLUDE_DIR)
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
#extract the version string from qglobal.h
read less from version headers into variables Instead of reading the whole file using file(READ) and later matching on the whole file use file(STRINGS ... REGEX) to get only those lines we are interested in at all. This will make the list much smaller (good for debugging) and also the regular expressions will need to match on much smaller strings. Also unset the content variables once they are not used anymore.
2012-08-19 11:54:56 +00:00
file(STRINGS ${QT_INCLUDE_DIR}/qglobal.h QGLOBAL_H REGEX "#define[\t ]+QT_VERSION_STR[\t ]+\"[0-9]+.[0-9]+.[0-9]+[a-z]*\"")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
string(REGEX REPLACE ".*\"([0-9]+.[0-9]+.[0-9]+[a-z]*)\".*" "\\1" qt_version_str "${QGLOBAL_H}")
read less from version headers into variables Instead of reading the whole file using file(READ) and later matching on the whole file use file(STRINGS ... REGEX) to get only those lines we are interested in at all. This will make the list much smaller (good for debugging) and also the regular expressions will need to match on much smaller strings. Also unset the content variables once they are not used anymore.
2012-08-19 11:54:56 +00:00
unset(QGLOBAL_H)
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# Under windows the qt library (MSVC) has the format qt-mtXYZ where XYZ is the
# version X.Y.Z, so we need to remove the dots from version
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
string(REGEX REPLACE "\\." "" qt_version_str_lib "${qt_version_str}")
set(QT_VERSION_STRING "${qt_version_str}")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
file(GLOB GLOB_PATHS_LIB /usr/lib/qt-3*/lib/)
if (QT_MT_REQUIRED)
find_library(QT_QT_LIBRARY
ENH: add more libraries for qt3
2005-09-12 14:28:48 +00:00
NAMES
qt-mt qt-mt${qt_version_str_lib} qt-mtnc${qt_version_str_lib}
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
qt-mtedu${qt_version_str_lib} qt-mt230nc qt-mtnc321 qt-mt3
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
PATHS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]"
ENV QTDIR
${GLOB_PATHS_LIB}
/usr/share/qt3
C:/Progra~1/qt
PATH_SUFFIXES
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
lib/qt lib/qt3 qt qt3 qt/lib qt3/lib
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
find_library(QT_QT_LIBRARY
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
NAMES
qt qt-${qt_version_str_lib} qt-edu${qt_version_str_lib}
ENH: add more libraries for qt3
2005-09-12 14:28:48 +00:00
qt-mt qt-mt${qt_version_str_lib} qt-mtnc${qt_version_str_lib}
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
qt-mtedu${qt_version_str_lib} qt-mt230nc qt-mtnc321 qt-mt3
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
PATHS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]"
ENV QTDIR
${GLOB_PATHS_LIB}
/usr/share/qt3
C:/Progra~1/qt/lib
PATH_SUFFIXES
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
lib/qt lib/qt3 qt qt3 qt/lib qt3/lib
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
find_library(QT_QASSISTANTCLIENT_LIBRARY
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
NAMES qassistantclient
PATHS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]"
ENV QTDIR
${GLOB_PATHS_LIB}
/usr/share/qt3
C:/Progra~1/qt
PATH_SUFFIXES
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
lib/qt lib/qt3 qt qt3 qt/lib qt3/lib
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
Fix casing of 'Qt' in docs, comments and user-visible strings. QT (cue-tea) is Apple QuickTime. Qt (cute) is the C++ framework.
2012-08-28 09:22:17 +00:00
# Qt 3 should prefer QTDIR over the PATH
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
find_program(QT_MOC_EXECUTABLE
FindQt[34]: Prefer matching versioned tool names After finding qmake we search in QT_BINARY_DIR for the other Qt tools. Try all versioned executable names before trying the plain executable name. This makes it much more likely that if 2 different major versions are installed in the same prefix CMake will be able to detect a proper set of tools.
2014-05-20 15:47:54 +00:00
NAMES moc-qt3 moc3 moc3-mt moc
ENH: Cleanup Find* modules with new HINTS feature - The find_* commands now provide a HINTS option. - The option specifies paths to be preferred over the system paths. - Many Find* modules were using two find calls with NO_DEFAULT_PATH to approximate the behavior, but that blocked users from overriding things with CMAKE_PREFIX_PATH. - This commit uses the HINTS feature to get desired behavior in only one find command call.
2008-06-09 20:04:06 +00:00
HINTS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
ENV QTDIR
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
PATHS
ENH: more qt changes
2005-09-12 13:32:21 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]/include/Qt"
${GLOB_PATHS_BIN}
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
/usr/share/qt3
C:/Progra~1/qt
PATH_SUFFIXES
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
lib/qt lib/qt3 qt qt3 qt/lib qt3/lib
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_MOC_EXECUTABLE)
set ( QT_WRAP_CPP "YES")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Fix casing of 'Qt' in docs, comments and user-visible strings. QT (cue-tea) is Apple QuickTime. Qt (cute) is the C++ framework.
2012-08-28 09:22:17 +00:00
# Qt 3 should prefer QTDIR over the PATH
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
find_program(QT_UIC_EXECUTABLE
FindQt[34]: Prefer matching versioned tool names After finding qmake we search in QT_BINARY_DIR for the other Qt tools. Try all versioned executable names before trying the plain executable name. This makes it much more likely that if 2 different major versions are installed in the same prefix CMake will be able to detect a proper set of tools.
2014-05-20 15:47:54 +00:00
NAMES uic-qt3 uic3 uic3-mt uic
ENH: Cleanup Find* modules with new HINTS feature - The find_* commands now provide a HINTS option. - The option specifies paths to be preferred over the system paths. - Many Find* modules were using two find calls with NO_DEFAULT_PATH to approximate the behavior, but that blocked users from overriding things with CMAKE_PREFIX_PATH. - This commit uses the HINTS feature to get desired behavior in only one find command call.
2008-06-09 20:04:06 +00:00
HINTS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
ENV QTDIR
ENH: Cleanup Find* modules with new HINTS feature - The find_* commands now provide a HINTS option. - The option specifies paths to be preferred over the system paths. - Many Find* modules were using two find calls with NO_DEFAULT_PATH to approximate the behavior, but that blocked users from overriding things with CMAKE_PREFIX_PATH. - This commit uses the HINTS feature to get desired behavior in only one find command call.
2008-06-09 20:04:06 +00:00
PATHS
ENH: more qt changes
2005-09-12 13:32:21 +00:00
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]/include/Qt"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]/include/Qt"
${GLOB_PATHS_BIN}
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
/usr/share/qt3
C:/Progra~1/qt
PATH_SUFFIXES
Modules: Replace coded PATHS with PATH_SUFFIXES Some modules assume that `/usr` and `/usr/local` are the only `CMAKE_PREFIX_PATH` entries and explicitly enumerate all paths instead of using `PATH_SUFFIXES` and relying on the dynamic set of prefix paths. This commit attempts to rectify that behavior.
2017-11-20 15:29:25 +00:00
lib/qt lib/qt3 qt qt3 qt/lib qt3/lib
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_UIC_EXECUTABLE)
set ( QT_WRAP_UI "YES")
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if (WIN32)
find_library(QT_QTMAIN_LIBRARY qtmain
Fix paths/hints for finding qtmain.
2012-02-20 20:02:11 +00:00
HINTS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
ENV QTDIR
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]"
"[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]"
Fix paths/hints for finding qtmain.
2012-02-20 20:02:11 +00:00
PATHS
use PATH_SUFFIXES to simplify find_* calls Especially remove "lib64" when the given paths are all Unix ones and "lib" is also explicitely given. In that case CMake will search "lib64" anyway for platforms where it is known to make sense.
2012-03-28 22:51:06 +00:00
"$ENV{ProgramFiles}/qt"
"C:/Program Files/qt"
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
DOC "This Library is only needed by and included with Qt3 on MSWindows. It should be NOTFOUND, undefined or IGNORE otherwise."
)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
FindQt3: let FPHSA handle the version selection
2012-03-02 15:56:41 +00:00
#support old QT_MIN_VERSION if set, but not if version is supplied by find_package()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(NOT Qt3_FIND_VERSION AND QT_MIN_VERSION)
set(Qt3_FIND_VERSION ${QT_MIN_VERSION})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# if the include a library are found then we have it
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
FindQt3: let FPHSA handle the version selection
2012-03-02 15:56:41 +00:00
FIND_PACKAGE_HANDLE_STANDARD_ARGS(Qt3
REQUIRED_VARS QT_QT_LIBRARY QT_INCLUDE_DIR QT_MOC_EXECUTABLE
VERSION_VAR QT_VERSION_STRING)
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(QT_FOUND ${QT3_FOUND} )
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_FOUND)
set( QT_LIBRARIES ${QT_LIBRARIES} ${QT_QT_LIBRARY} )
set( QT_DEFINITIONS "")
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if (WIN32 AND NOT CYGWIN)
if (QT_QTMAIN_LIBRARY)
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# for version 3
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set (QT_DEFINITIONS -DQT_DLL -DQT_THREAD_SUPPORT -DNO_DEBUG)
set (QT_LIBRARIES imm32.lib ${QT_QT_LIBRARY} ${QT_QTMAIN_LIBRARY} )
set (QT_LIBRARIES ${QT_LIBRARIES} winmm wsock32)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
else ()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# for version 2
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set (QT_LIBRARIES imm32.lib ws2_32.lib ${QT_QT_LIBRARY} )
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
else ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set (QT_LIBRARIES ${QT_QT_LIBRARY} )
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set (QT_DEFINITIONS -DQT_SHARED -DQT_NO_DEBUG)
if(QT_QT_LIBRARY MATCHES "qt-mt")
set (QT_DEFINITIONS ${QT_DEFINITIONS} -DQT_THREAD_SUPPORT -D_REENTRANT)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if (QT_QASSISTANTCLIENT_LIBRARY)
set (QT_LIBRARIES ${QT_QASSISTANTCLIENT_LIBRARY} ${QT_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# Backwards compatibility for CMake1.4 and 1.2
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set (QT_MOC_EXE ${QT_MOC_EXECUTABLE} )
set (QT_UIC_EXE ${QT_UIC_EXECUTABLE} )
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
# for unix add X11 stuff
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(UNIX)
find_package(X11)
if (X11_FOUND)
set (QT_LIBRARIES ${QT_LIBRARIES} ${X11_LIBRARIES})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if (CMAKE_DL_LIBS)
set (QT_LIBRARIES ${QT_LIBRARIES} ${CMAKE_DL_LIBS})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_QT_LIBRARY MATCHES "qt-mt")
find_package(Threads)
set(QT_LIBRARIES ${QT_LIBRARIES} ${CMAKE_THREAD_LIBS_INIT})
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_MOC_EXECUTABLE)
execute_process(COMMAND ${QT_MOC_EXECUTABLE} "-v"
FindQt3: fix warning when Qt3 is not found -- Could NOT find Qt3 (missing: QT_QT_LIBRARY QT_INCLUDE_DIR QT_MOC_EXECUTABLE) CreateProcess failed QT_MOC_EXECUTABLE-NOTFOUND -v CreateProcess failed QT_UIC_EXECUTABLE-NOTFOUND -version
2012-03-02 15:55:17 +00:00
OUTPUT_VARIABLE QTVERSION_MOC
ERROR_QUIET)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
if(QT_UIC_EXECUTABLE)
execute_process(COMMAND ${QT_UIC_EXECUTABLE} "-version"
FindQt3: fix warning when Qt3 is not found -- Could NOT find Qt3 (missing: QT_QT_LIBRARY QT_INCLUDE_DIR QT_MOC_EXECUTABLE) CreateProcess failed QT_MOC_EXECUTABLE-NOTFOUND -v CreateProcess failed QT_UIC_EXECUTABLE-NOTFOUND -version
2012-03-02 15:55:17 +00:00
OUTPUT_VARIABLE QTVERSION_UIC
ERROR_QUIET)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(_QT_UIC_VERSION_3 FALSE)
Remove .* expressions from beginning and end of MATCHES regexs All these expressions work the same: "foo" ".*foo.*" "^.*foo.*$" This assumes that the "Intel*" expressions were meant to be "Intel.*".
2014-04-11 16:17:46 +00:00
if("${QTVERSION_UIC}" MATCHES " 3.")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(_QT_UIC_VERSION_3 TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: make sure findqt3 finds qt3 and not qt4
2006-11-22 18:30:59 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(_QT_MOC_VERSION_3 FALSE)
Remove .* expressions from beginning and end of MATCHES regexs All these expressions work the same: "foo" ".*foo.*" "^.*foo.*$" This assumes that the "Intel*" expressions were meant to be "Intel.*".
2014-04-11 16:17:46 +00:00
if("${QTVERSION_MOC}" MATCHES " 3.")
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(_QT_MOC_VERSION_3 TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif()
ENH: make sure findqt3 finds qt3 and not qt4
2006-11-22 18:30:59 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(QT_WRAP_CPP FALSE)
if (QT_MOC_EXECUTABLE AND _QT_MOC_VERSION_3)
set ( QT_WRAP_CPP TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
set(QT_WRAP_UI FALSE)
if (QT_UIC_EXECUTABLE AND _QT_UIC_VERSION_3)
set ( QT_WRAP_UI TRUE)
Remove CMake-language block-end command arguments Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:50:14 +00:00
endif ()
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
Convert CMake-language commands to lower case Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
2012-08-13 17:47:32 +00:00
mark_as_advanced(
ENH: add new qt stuff from warfield@bwh.harvard.edu, thanks
2005-07-15 16:14:47 +00:00
QT_INCLUDE_DIR
QT_QT_LIBRARY
QT_QTMAIN_LIBRARY
QT_QASSISTANTCLIENT_LIBRARY
QT_UIC_EXECUTABLE
QT_MOC_EXECUTABLE
QT_WRAP_CPP
QT_WRAP_UI
BUG: #3514: qt-mt3.lib wasn't found on windows STYLE: remove some (now) unnecessary /usr/lib, /usr/local/lib, /usr/include and /usr/local/include search paths Alex
2006-08-27 17:59:18 +00:00
)
Reference in New Issue Copy Permalink