reactos/CMake
1
0
Fork 0
mirror of https://github.com/reactos/CMake.git synced 2024-12-21 11:09:08 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
642fa25da0
CMake/Tests/GeneratorExpression/check-part1.cmake

60 lines
1.7 KiB
CMake
Raw Normal View History

GenEx: Add expressions to specify build- or install-only values This is for specifying INCLUDE_DIRECTORIES relevant to the build-location or the install location for example: set_property(TARGET foo PROPERTY INTERFACE_INCLUDE_DIRECTORIES "$<BUILD_INTERFACE:${CMAKE_CURRENT_BINARY_DIR};${CMAKE_CURRENT_SOURCE_DIR}>" "$<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include>" ) A 'bar' target can then use: set_property(TARGET bar PROPERTY INCLUDE_DIRECTORIES "$<TARGET_PROPERTY:foo,INTERFACE_INCLUDE_DIRECTORIES>" ) and it will work whether foo is in the same project, or an imported target from an installation location, or an imported target from a build location generated by the export() command. Because the generator expressions are only evaluated at build-time, these new expressions are equivalent to the ZeroNode and OneNode. The GeneratorExpression test is split into parts. Some shells can't run the custom command as it is getting too long.
2012-09-23 11:16:44 +00:00
include(${CMAKE_CURRENT_LIST_DIR}/check-common.cmake)
Add boolean generator expressions Add generator expressions that combine and use boolean test results: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1' These will be useful to evaluate (future) boolean query expressions and condition content on the results. Include tests and documentation.
2012-08-13 13:49:53 +00:00
message(STATUS "config=[${config}]")
Genex: Add a nullary form for CONFIG This is consistent with other similar expressions such as PLATFORM_ID, and makes the CONFIGURATION expression obsolete. Fix an off-by-one error in GeneratorExpressionContent::EvaluateParameters exposed by a unit test. Remove the test for 'bad' nullary use of $<CONFIG>. Add a unit test to verify that $<CONFIG> and $<CONFIGURATION> have the same value.
2013-12-31 14:57:25 +00:00
check(config "${short_config}")
Add boolean generator expressions Add generator expressions that combine and use boolean test results: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1' These will be useful to evaluate (future) boolean query expressions and condition content on the results. Include tests and documentation.
2012-08-13 13:49:53 +00:00
check(test_0 "")
GenEx: Add tests for "0" and "1" expressions with literal commas.
2012-10-04 08:27:34 +00:00
check(test_0_with_comma "")
Add boolean generator expressions Add generator expressions that combine and use boolean test results: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1' These will be useful to evaluate (future) boolean query expressions and condition content on the results. Include tests and documentation.
2012-08-13 13:49:53 +00:00
check(test_1 "content")
GenEx: Add tests for "0" and "1" expressions with literal commas.
2012-10-04 08:27:34 +00:00
check(test_1_with_comma "-Wl,--no-undefined")
Add boolean generator expressions Add generator expressions that combine and use boolean test results: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1' These will be useful to evaluate (future) boolean query expressions and condition content on the results. Include tests and documentation.
2012-08-13 13:49:53 +00:00
check(test_and_0 "0")
check(test_and_0_0 "0")
check(test_and_0_1 "0")
check(test_and_1 "1")
check(test_and_1_0 "0")
check(test_and_1_1 "1")
GenEx: Test early determination of AND and OR It should be possible for example to do this: "$<AND:${FOO},$<BOOL:${TGT}>,$<BOOL:$<TARGET_PROPERTY:${TGT},PROP>" such that it works simliarly to the C code: if (foo && tgt && tgt->prop()) { } The example of generator expression code is a little bit contrived as it could be written other ways with the same functionality. Nevertheless, as these cases already work and are intentional, test for them.
2012-10-20 12:14:20 +00:00
check(test_and_0_invalidcontent "0")
Add $<CONFIG:...> boolean query generator expression This expression evaluates to '1' or '0' to indicate whether the build configuration for which the expression is evaluated matches tha named configuration. In combination with the "$<0:...>" and "$<1:...>" expressions this allows per-configuration content to be generated.
2012-08-13 14:00:32 +00:00
check(test_config_0 "0")
check(test_config_1 "1")
GenEx: Use case insensitive comparison for $<CONFIG:...> This fixes a regression introduced by commit f1eacf0e (cmGeneratorExpression: Re-write for multi-stage evaluation).
2012-11-01 13:21:25 +00:00
foreach(c debug release relwithdebinfo minsizerel)
if(NOT "${test_config_${c}}" MATCHES "^(0+|1+)$")
message(SEND_ERROR "test_config_${c} is \"${test_config_${c}}\", not all 0 or all 1")
endif()
endforeach()
Add boolean generator expressions Add generator expressions that combine and use boolean test results: $<0:...> = empty string (ignores "...") $<1:...> = content of "..." $<AND:?[,?]...> = '1' if all '?' are '1', else '0' $<OR:?[,?]...> = '0' if all '?' are '0', else '1' $<NOT:?> = '0' if '?' is '1', else '1' These will be useful to evaluate (future) boolean query expressions and condition content on the results. Include tests and documentation.
2012-08-13 13:49:53 +00:00
check(test_not_0 "1")
check(test_not_1 "0")
check(test_or_0 "0")
check(test_or_0_0 "0")
check(test_or_0_1 "1")
check(test_or_1 "1")
check(test_or_1_0 "1")
check(test_or_1_1 "1")
GenEx: Test early determination of AND and OR It should be possible for example to do this: "$<AND:${FOO},$<BOOL:${TGT}>,$<BOOL:$<TARGET_PROPERTY:${TGT},PROP>" such that it works simliarly to the C code: if (foo && tgt && tgt->prop()) { } The example of generator expression code is a little bit contrived as it could be written other ways with the same functionality. Nevertheless, as these cases already work and are intentional, test for them.
2012-10-20 12:14:20 +00:00
check(test_or_1_invalidcontent "1")
Extend the generator expression language with more logic. Generator expressions for comparing strings, evaluating strings as booleans, and for creating literal right-angle-brackets and commas are added. Those may be needed in some cases where they appear in literals.
2012-09-12 02:20:42 +00:00
check(test_bool_notfound "0")
check(test_bool_foo_notfound "0")
check(test_bool_true "1")
check(test_bool_false "0")
check(test_bool_on "1")
check(test_bool_off "0")
check(test_bool_no "0")
check(test_bool_n "0")
GenEx: Add test for $<BOOL:> with empty parameter.
2012-10-04 08:24:32 +00:00
check(test_bool_empty "0")
Extend the generator expression language with more logic. Generator expressions for comparing strings, evaluating strings as booleans, and for creating literal right-angle-brackets and commas are added. Those may be needed in some cases where they appear in literals.
2012-09-12 02:20:42 +00:00
check(test_strequal_yes_yes "1")
check(test_strequal_yes_yes_cs "0")
check(test_strequal_yes_no "0")
check(test_strequal_no_yes "0")
check(test_strequal_angle_r "1")
check(test_strequal_comma "1")
Add $<SEMICOLON> generator expression. This expression is useful to put a ';' in a command line argument without dividing the argument during CMake list expansion.
2013-03-12 06:52:01 +00:00
check(test_strequal_semicolon "1")
Extend the generator expression language with more logic. Generator expressions for comparing strings, evaluating strings as booleans, and for creating literal right-angle-brackets and commas are added. Those may be needed in some cases where they appear in literals.
2012-09-12 02:20:42 +00:00
check(test_strequal_angle_r_comma "0")
GenEx: Parse comma after colon tokens specially Otherwise the comma is treated as plain text by ParseContent. $<STREQUAL:,> should be valid and true. $<STREQUAL:,something> should be valid and false. $<STREQUAL:,,> should be non-valid as it is 3 parameters. $<STREQUAL:something,,> should be non-valid as it is 3 parameters. Additionally, this allows reporting the correct error for other expressions. For example $<TARGET_PROPERTY:,> should be invalid because it has an empty target and empty property. It shouldn't attempt to read the property ',' on the 'implicit this' target.
2012-10-03 22:34:03 +00:00
check(test_strequal_both_empty "1")
check(test_strequal_one_empty "0")
Extend the generator expression language with more logic. Generator expressions for comparing strings, evaluating strings as booleans, and for creating literal right-angle-brackets and commas are added. Those may be needed in some cases where they appear in literals.
2012-09-12 02:20:42 +00:00
check(test_angle_r ">")
check(test_comma ",")
Add $<SEMICOLON> generator expression. This expression is useful to put a ';' in a command line argument without dividing the argument during CMake list expansion.
2013-03-12 06:52:01 +00:00
check(test_semicolon ";")
GenEx: Parse colon after arguments separator colon specially. The rationale is similar to that in commit b3d8f5da (GenEx: Parse comma after colon tokens specially, 2012-10-04), in that colon tokens should not be parsed as identifier-argument delimiters after the first colon.
2012-10-12 14:51:16 +00:00
check(test_colons_1 ":")
check(test_colons_2 "::")
check(test_colons_3 "Qt5::Core")
check(test_colons_4 "C:\\\\CMake")
check(test_colons_5 "C:/CMake")
Reference in New Issue Copy Permalink