Make the implementation for this compiler more complete.
IAR has multiple C++ modes, historically they were reduced c++ versions
for embedded that gradually improved to the full standard (which can be
reduced again by e.g. disabling rtti and exceptions). The new
implementation picks the best available, but the c++ mode can also be
overridden by defining `CMAKE_IAR_CXX_FLAG`.
Add C/C++ standard flags so that all modes up to and including the last
supported standard are defined.
Fixes: #16826
Compilers such as MSVC and IAR may have variants that target different
architectures. We have been using a `MSVC_<LANG>_ARCHITECTURE_ID`
variable to hold this information for MSVC. Add an alternative with a
more general name (later we can port MSVC to it too).
This additional information may be needed to generate proper invocations
of the compiler based on its architecture variant.
During compiler identification, extract the Xcode `CURRENT_ARCH` value
and save it for later use by the Xcode generator in an internal compiler
information variable. This will be useful to know the locations of
object files when only one architecture is built.
77139e32 Swift: Simplify mixed test case to make it version agnostic
c03141c0 Swift: Default to Swift 3.0 with Xcode 8.3 and later
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !638
Make the `ClCompile` element name and `PostBuildEvent/Command` value
configurable. Move the current content into default values for the
corresponding variables.
Clang may raise an error when passed a `-march=` option that doesn't
correspond to the current target triple. CMake cannot pass the target
triple when determining the compiler id because it doesn't know how yet,
but it does pass along user-specified flags. This breaks when those
user-specified flags include `-march=`. Fix this use case by also
trying to find the compiler id without the user-specified flags.
Fixes: #16587
Visual Studio provides toolchains that are themselves built for 32-bit
or 64-bit host architectures. By default it uses the 32-bit tools, but
it can be told to prefer the 64-bit tools on 64-bit hosts. Extend the
`CMAKE_GENERATOR_TOOLSET` specification to provide a way to request
use of the 64-bit host tools.
Closes: #15622
Per-source copyright/license notice headers that spell out copyright holder
names and years are hard to maintain and often out-of-date or plain wrong.
Precise contributor information is already maintained automatically by the
version control tool. Ultimately it is the receiver of a file who is
responsible for determining its licensing status, and per-source notices are
merely a convenience. Therefore it is simpler and more accurate for
each source to have a generic notice of the license name and references to
more detailed information on copyright holders and full license terms.
Our `Copyright.txt` file now contains a list of Contributors whose names
appeared source-level copyright notices. It also references version control
history for more precise information. Therefore we no longer need to spell
out the list of Contributors in each source file notice.
Replace CMake per-source copyright/license notice headers with a short
description of the license and links to `Copyright.txt` and online information
available from "https://cmake.org/licensing". The online URL also handles
cases of modules being copied out of our source into other projects, so we
can drop our notices about replacing links with full license text.
Run the `Utilities/Scripts/filter-notices.bash` script to perform the majority
of the replacements mechanically. Manually fix up shebang lines and trailing
newlines in a few files. Manually update the notices in a few files that the
script does not handle.
The `.pbxproj` file must now specify a `SWIFT_VERSION` value.
Set it to the legacy value of "2.3" for now. Later this can
be made configurable (e.g. to "3.0").
We use file(GLOB) to load the list of files produced by compiling the
compiler identification source. Encode square brackets in the path to
the directory so that they are not treated as special characters in the
globbing expression. Otherwise we fail to find any files when the path
contains square brackets and the compiler id is unknown.
Reported-by: Esch Nigma <eschnigma@openmailbox.org>
We run MSVC-like compilers with the `/showIncludes` option and match the
output to extract the corresponding message. Fix the matching to
support compilers like `clang-cl` that print the message on the first
line such that it is not preceded by a newline.
LLVM-Issue: https://llvm.org/bugs/show_bug.cgi?id=27226
VS expects the platform to be just `Itanium`, so drop the incorrect
special case mapping it to `ia64`. This platform name has been wrong
since the logic was added by commit v2.8.10~148^2~8 (VS: Detect the
compiler id and tool location, 2012-08-16).
In commit v3.4.0-rc1~18^2 (Disable shared library support when compiler
links statically, 2015-09-30) we tried to detect when the compiler is
not capable of linking shared libraries (possibly due to flags in use).
However, the approach is not robust against flags like `-nostdlib`.
Revert it for now pending another solution to the original problem.
3f077996 VS: Add support for selecting the Windows 10 SDK (#15670)
5dfc4c5f VS: Add hook to initialize Windows platform settings
61c472a2 cmSystemTools: Add VersionCompareGreater helper
Teach the VS 2015 generator to produce a WindowsTargetPlatformVersion
value. Use the CMAKE_SYSTEM_VERSION to specify the version and if not
set choose a default based on available SDKs. Activate this behavior
when targeting Windows 10.
Co-Author: Brad King <brad.king@kitware.com>
When a user or a compiler wrapper adds '-static' to the compiler flags
then it will always link static binaries. Detect this from the compiler
id binary and disable TARGET_SUPPORTS_SHARED_LIBS. This will prevent
projects from accidentally adding shared libraries when the toolchain
does not support them. It also helps CMake avoid linking with flags
that require shared libraries to be supported.
Move detection over to the compiler id logic where we have already
constructed the list of compiler flags from ARG1 and CMAKE_<LANG>_FLAGS.
Pass the flags when we execute "cl" with "/showIncludes". Also pass "/c"
because we only need to compile, not link. Check the compiler process
exit code before trusting its output.
Move the Ld invocation match expression from CMakeDetermineCompilerId
into CMakeDetermine{C,CXX,Fortran}Compiler so that it can be specified
on a per-language basis.
When constructing the "id_src" value for substitution into VS or Xcode
compiler id projects, the input "src" variable already contains the file
name with no path so we do not need get_filename_component. We know
this because CMAKE_DETERMINE_COMPILER_ID_WRITE already references
"${src}" with this assumption.
Some compilers can only be distinguished by their compilation output
rather than preprocessor symbols or special flags. Add infrastructure
to determine the compiler id by matching output.
Callers of CMAKE_DETERMINE_COMPILER_ID initialize the
CMAKE_${lang}_COMPILER_ID to unset so we can check it at the end of each
loop iteration instead of the beginning. This approach allows us to
break out of the loop as soon as we succeed. It will also allow checks
to be added in more places within the loop later.
Teach CMAKE_DETERMINE_COMPILER_ID to optionally try detecting the
compiler id using some given flags before trying to detect it with no
special flags. This will be useful for Fortran detection to distinguish
some compilers that use the preprocessors of others but have no macro of
their own by getting verbose output.
Fortran does not offer syntax to compose a string literal at
preprocessing time from numeric compuations. Instead encode each digit
of each component as a separate INFO string and compose them in CMake
code after extraction. Support MAJOR, MINOR, PATCH, and TWEAK
components with up to 8 digits each.
In commit v3.1.0-rc1~113^2 (Use a more reliable regex for extracting
binary INFO strings, 2014-09-03) the matching of INFO: strings was made
more strict and no longer matches just "INFO:qnxnto". Use
"INFO:qnxnto[]" instead to conform to the new pattern.
The approach in commit v3.1.0-rc1~1^2 (Xcode: Fix compiler id detection
when code signing is required, 2014-10-22) still requires a code signing
key when targeting a real device. Instead set CODE_SIGNING_REQUIRED to
"NO" to tell Xcode not to sign at all. Drop the corresponding setting
of the code signing identity.
Since commit v3.1.0-rc1~1^2~1 (Xcode: Fix compiler id detection for iOS
tools, 2014-10-22) our compiler id detection project sets the product
type to 'com.apple.product-type.bundle.unit-test'. This causes the Ld
command line on which we match the path to the compiler to have a
'CompilerIdC.xctest/' component. The commit updated our regex to match
this, but placed it before the extra './' component that Xcode 5.0 and
below produce. Xcode <= 5.0 prints '/./CompilerIdC.xctest/', so switch
the order of the two components in the regex to match it.
The iOS product type 'com.apple.package-type.bundle.unit-test' requires
code signing on Xcode 6. Other iOS target types do too. Until CMake
learns to add the CODE_SIGN_IDENTITY build attribute itself, toolchain
files can set CMAKE_XCODE_ATTRIBUTE_CODE_SIGN_IDENTITY to tell the Xcode
generator to add the attribute. Teach CMakeDetermineCompilerId to
recognize this variable and add the CODE_SIGN_IDENTITY build attribute
to the compiler id project.
Since commit 0cce556b (Xcode: Use sysroot and deployment target to
identify compiler, 2014-04-29) our compiler id detection project uses
the target platform SDK in case Xcode selects a different compiler based
on it. Now the compiler id project actually compiles with the target
compiler and SDK when cross-compiling.
The iOS tools do not support the 'com.apple.product-type.tool' product
type we use in our compiler id detection project. When targeting
iPhone, use product type 'com.apple.product-type.bundle.unit-test'
instead.
