A custom command may name a target created by add_custom_target in its
DEPENDS field. Treat this case as a target-level dependency only since
a custom target provides no standard file on which to add a file-level
dependency.
Imported targets do not themselves build, but we can follow dependencies
through them to find real targets. This allows imported targets to
depend on custom targets that provide the underlying files at build
time.
Imported targets do not themselves build, but we can follow dependencies
through them to find real targets. This allows imported targets to
depend on custom targets that provide the underlying files at build
time.
f6f3ae5 Update tag in the Contracts/cse-snapshot test.
1e4fd5f Enable overriding contract test timeout values.
c81ad34 Add a contract test for building the CSE.
942ace8 Fix contract test so it is not hard coded to the vtk542 test.
fd343a1 Add a "Contract" test for VTK. The test downloads and builds VTK.
Also:
- allow local variables 'repo' and 'tag' to be overridden
by the optional LocalOverrides.cmake
- print out STATUS messages to see the variable values in
CMake configure output
48e80eb Fixes to GetPrerequisites for cygwin
bee4802 Append the gp_tool path to the system PATH using native slashes.
8e550ba Remove unecessary TO_CMAKE_PATH for gp_cmd_dir.
1684198 Switch to CMAKE_PATH when doing PATH comparisons on Windows.
be94c49 Fixed appending PATH to dumpbin tool from growing without bounds.
Fix IF(WIN32) guards check for cygwin. Fix checking if the depenency is in a system location to use cygwin style paths on cygwin. Also change GetPrerequisites to switch gp_tool to tools that are very unlikely to be found, ie. dumpbin on Apple and otool on Windows/Unix.
Apple released an update recently in which there
was a broken symlink for jni.h that pointed to
a non-existent file. CMake had trouble configuring
because it encountered an error trying to read
jni.h.
We avoid the problem here by introducing a variable
CTEST_RUN_Java, which defaults to OFF on Macs, that
indicates whether to even attempt finding java, reading
jni.h and adding the "Java" CMake test.
If you would like to test Java on a Mac where the
jni.h symlink is not busted, feel free to pass in
-DCTEST_RUN_Java:BOOL=ON when configuring CMake.
IF(... MATCHES ...) used for comparing directories chokes especially in the case of C:\Program Files (x86)\<blah> because of regex pattern matching. Switched this to use STREQUAL in a loop instead.
Use a longer value as the default timeout (6 hours).
For a per-contract-test timeout value, set ${project}_TEST_TIMEOUT
in the project's RunTest.cmake file. To use a longer value for
all non-specific contract tests, set a CMake cache variable
named CMAKE_CONTRACT_TEST_TIMEOUT_DEFAULT.
All timeout values are in seconds.
Also, patch up last commit to defer evaluation of ENV{HOME}
until EnforceConfig.cmake is included at ctest time. This
allows Windows machines to have "\\" characters in the HOME
environment variable if they want to.
To activate the CSE contract test on a given Linux
machine's CMake dashboard, put
CMAKE_CONTRACT_PROJECTS:STRING=cse-snapshot
in the CMake dashboard's initial cache.
The chosen snapshot does not generate subproject
dependency info right now. That code was in a
previous revision in the CSE's svn repo that
apparently has not been merged into the present cse
git repository master branch. After that is fixed up
in the cse repo, we can update the tag here so that
the snapshot built here can run a sub-project based
dashboard script. For now, it runs as one big build
step, building 'all'.
96a335f XCode generation should fail if lang isn't known
d3a8943 Fix which string is checked for in the test
220c5dc Add test that CMake errors with empty libs
Visual Studio Express editions do not support solution folders,
so default behavior should be as if USE_FOLDERS global property
is OFF.
Also, allow folder names to be the same as target names: internally,
use a prefix to distinguish folder GUIDs from target GUIDs. Add
a target and folder with the same name in the ExternalProject
test to exercise this code.
For CMake itself, provide a new option CMAKE_USE_FOLDERS that
defaults to ON so that Visual Studio users get a nicely organized
CMake project. Express edition users will have to turn off the
CMAKE_USE_FOLDERS option in order to build CMake in the VS Express
IDE.
Some HPUX compilers give this error: Error 690: "/home/cport/Dashboards/My Tests/CMake-build/Tests/CheckCompilerRelatedVariables/main.cxx", line 1 # Nonempty source files must end with a newline that is not preceded by a backslash.
a798bb7 Avoid CustomCommand test failure on VS71 (#9963)
9b4ab06 Avoid CustomCommand test failure on VS71 (#9963)
9d2e648 No extra spaces in CustomCommand test (#9963)
269a4b8 Enable calling commands with : in argv[1] (#9963)
The idea is that we can make sure that CMake is staying backwards
compatible by testing projects against CMake as the changes are made
in CMake. Because these tests will take a long time to run, they
will not be enabled by default. Instead, they will be enabled by
putting a cache variable into CMake.
Test still failing on dash1.kitware. Give up on testing
the new arg on MSVC71. Test it with newer nmakes instead.
All other dashboards are fine with -DPATH=c:/posix/path
as the first arg, so keep it except when MSVC71 is true.
eccc7d5 Merge branch 'allow_upper_case_cpp_and_others' into resolve/fix_target_name_with_dot_vs10/allow_upper_case_cpp_and_others
ed37fc3 VS2010: Set IntDir for utility and global targets.
e79e412 VS2010: Honor PROJECT_LABEL target property (#10611)
530ade6 Fix targets with . in the name for VS 10 IDE.
The new first arg in the test is the critical one
to prove that the new NMake specific code works.
The additional colons in the middle of the arg
stream work fine everywhere else, but not on
dash1.kitware with Visual Studio 7.1. Just avoid
the failure for now by removing the unnecessary
new args from the test.
The nightly dashboard showed that the following
platforms had difficulties dealing with "bin dir"
and/or "check command line" as directory and
file names:
AIX
Borland 5.5, 5.6 and 5.8
IRIX
NMake 6.0
OpenBSD
VS 7.1
Watcom
Re-visit later, after the release, to use spaces
in the bin dir and in the target name where possible.
The solution seems hackish, but it works: for
NMake only, prepend a no-op command before each
real command that begins with ".
This is really a work-around for an NMake problem.
When a command begins with ", nmake truncates the
first argument to the command after the first :
in that arg. It has a parsing problem.
Workaround..., hackish..., but it should solve
the issue for #9963 and its related friends.
Also, modify the CustomCommand test to replicate
the problem reported in issue #9963. Before the
NMake specific code change, the test failed.
Now, it passes. Ahhhhhh.
7944e4e Allow testing of .CPP on WIN32 as it is a case insensitive OS and should work.
ba0a890 Only test for .CPP on Microsoft compilers which will handle .CPP as c++.
d26cd46 Only use .CPP .CXX and .C++ do not work by default with g+++.
ced61f5 Let CMake recognize .CPP .CXX and .C++ as c++ files.
This work was started from a patch by Thomas Schiffer.
Thanks, Thomas!
See the newly added documentation of the FOLDER target
property for details.
Also added global properties, USE_FOLDERS and
PREDEFINED_TARGETS_FOLDER. See new docs here, too.
By default, the FOLDER target property is used to organize
targets into folders in IDEs that have support for such
organization.
This commit adds "solution folder" support to the Visual
Studio generators. Currently works with versions 7 through
10.
Also, use the new FOLDER property in the ExternalProject
test and in the CMake project itself.
This command allows a user to quickly see the list of all available
test labels. The labels are also printed in verbose show only mode,
alongside their corresponding tests.
Strong dependencies (created by add_dependencies) must be honored when
linearizing a strongly-connected component of the target dependency
graph. The initial graph edges have strong/weak labels and can contain
cycles that do not consist exclusively of strong edges. The final graph
never contains cycles so all edges can be strong.
This commit introduces the ability to add custom targets
that correspond to individual ExternalProject steps.
The main motivation behind this new feature is to drive
sub-project based dashboard steps as external projects
with separate targets for update, configure, build and
test output. This makes it easy to construct a ctest -S
script to drive such a dashboard.
With no STEP_TARGETS defined, there are no additional
custom targets introduced, to minimize the chatter in
the target name space. Clients may define STEP_TARGETS
on a per-ExternalProject_Add basis, or at the directory
level by setting the EP_STEP_TARGETS directory property.
When a module is first contributed Kitware has made no modifications on
which to place a copyright. Require the contributor to have a copyright
notice, but not specifically by Kitware.
