Add `VS_SHADER_DISABLE_OPTIMIZATIONS` and `VS_SHADER_ENABLE_DEBUG`
source file properties to control these settings on `.hlsl` files in the
VS generator.
Fixes: #17406
4e7f6738 Defer check for sources within a target until generation.
6e4e7c65 Tests: Exclude bad RunCMake.add_executable case on multi-arch Xcode
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !1242
The `add_library` and `add_executable` commands can now be called with
no source-files and won't generate a warning or error message, as long
as source-files will be added later via the `target_sources` command.
If during the generation step still no sources are associated with
targets created by such calls a useful error message will be generated
and generation fails.
Targets of type `INTERFACE_LIBRARY`, `UTILITY` or `GLOBAL_TARGET` are
excluded from this check because we do not need sources for these target
types during generation.
Fixes: #16872
Visual Studio 2017 supports multiple instances installed on a single
machine. We use the Visual Studio Installer tool to enumerate instances
and select one. Once we select an instance for a given build tree, save
the result in `CMAKE_GENERATOR_INSTANCE` so we can re-configure the tree
with the same instance on future re-runs of CMake.
Fixes: #17268
Add cache entry `CMAKE_GENERATOR_INSTANCE` to hold the instance location
persistently across re-runs of CMake in a given build tree.
For now we reject the option by default if explicitly set. It will be
implemented on a per-generator basis. Pass the setting into try_compile
project generation. Add a RunCMake.GeneratorInstance test to cover
basic use cases for the option. Verify that `CMAKE_GENERATOR_INSTANCE`
is empty by default, and that it is rejected when the generator does not
support a user setting.
Issue: #17268
d45aa38a Add dev notes for topic 'curl_netrc_options'
60c272b6 ExternalProject: Add support for NETRC and NETRC_FILE suboption
754e39dd Add testcases for file(DOWNLOAD|UPLOAD) netrc options
5d67e902 file(DOWNLOAD|UPLOAD): Add 'NETRC' and 'NETRC_FILE' suboption
Acked-by: Kitware Robot <kwrobot@kitware.com>
Acked-by: Ruslan Baratov <ruslan_baratov@yahoo.com>
Merge-request: !1376
96d642c7 cmake-gui: Use cmake::Open to open generated project
5de37a4a cmake: Add --open option for IDE generators
Acked-by: Kitware Robot <kwrobot@kitware.com>
Acked-by: Ruslan Baratov <ruslan_baratov@yahoo.com>
Merge-request: !1337
1e56634f FetchContent: Add tests
60e74d2f FetchContent: New module for populating content at configure time
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !1306
- The .desc files will be in the same folder as the generated .cc and .h files.
- Paths to generate .desc files are stored in a variable passed in
- This is only implemented for C++
- Remove legacy ARGS
- Add test that generates and uses C++ protobuf message
- Add test that checks that the generated .desc file can be instantiated
with DynamicMessageFactory
- Add Help rst for new feature
The VS_SHADER_OUTPUT_HEADER_FILE property is the name of the generated
header file containing the object code of the shader.
The VS_SHADER_VARIABLE_NAME property is the name of the variable
containing the object code in the above header file.
Signed-off-by: Kevin M. Godby <kevin@godby.org>
Find GLVND components if available. Add `GLX` and `EGL` options for
COMPONENTS that allow requesting these libraries explicitly. Introduce
new import targets for these windowing-system-specific libraries.
On a GLVND system, populate the legacy `OPENGL_LIBRARIES` variable and
the `OpenGL::GL` target using the `OpenGL` and `GLX` components. On
non-GLVND systems, continue to use the legacy `GL` library and simply do
not provide the GLVND components. Application code can choose to adapt
based on the availability of GLVND components as imported targets.
The `CPackIFW` module `cpack_ifw_configure_component` and
`cpack_ifw_configure_component_group` commands gained a new
`REPLACES` and `CHECKABLE` options.
Adds support for epoch version to CPackRPM and
CPackDeb packagers.
Also adds better version checking to CPackDeb
that complies with Debian rules.
Fixes: #17057
bf1e606f FindMPI: Add support for FreeBSD and SLES
2f673da6 FindMPI: Support components for various languages
9a58e69c FindMPI: Modernization from ground up
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !893
This is a near-total rewrite of FindMPI implementing the following
features:
Environmental improvements:
- C++ settings can now be picked from C settings if no dedicated C++
settings are found (some installs of IBM Platform MPI)
- Fortran settings can now be found on MPICH-1, MVAPICH-1, Microsoft
MPI and MPICH-2 on Windows.
- Improved flag procession logic: Flags related to security enhancements
of MPI itself, and unrelated to MPI usage (-fstack-protector-strong on
e.g. RHEL 7 for MPICH and MVAPICH) will be filtered out properly now.
-pthread is now being handled. -fno-strict-aliasing, which may be needed
while compiling MVAPICH (e.g. RHEL 7's MVAPICH package) is also
filtered.
Features added:
- MPI version can be determined for each language and is exposed as the
package version
- MPI functionality is being tested to ensure the correctness of
settings
- MPI-2 C++ bindings can be suppressed if desired by the project or
user. For older MPIs, this often resolves issues and eliminated the
infamous SEEK_SET trouble.
- MPI-2 C++ bindings are now being searched for and exposed by a
variable if detected.
- Fortran support now does not make assumptions over the MPI present and
works with ILP64 MPI implementations.
- Fortran now exposes which bindings (mpif.h, mpi/mpi_f08 modules) are
available
- MPI detection can now work hybridly, which for example permits using the
Fortran modules shipped with some compiler suites together with MPI
(e.g. PGI on Windows shipping MSMPI modules)
- Ability to determine MPI library version (*requires* try_run, caution)
upon request
- Ability to determine Fortran capabilities from MPI-3 for each of the
bindings (subarrays, asynchronous attribute protecting entities) (also
requires try_run)
Fine grained control over the search process:
- Possibility to selectively enable and disable steps like compiler
wrapper search and guessing. Permits picking Microsoft MPI over Intel
MPI if both are loaded (previously not possible without removing the
IMPI compiler wrappers from the environment)
- Ability to pick MPICH2 over MSMPI (previously the first one located
was taken)
- A user may now pass compiler flags to the compiler wrapper script,
enabling much more flexibility. This permits for example linking the
Intel MPI debug runtime, static linking, ILP64 with Fortran,
linking tracing, ...
- A user may define a suffix for all MPI binaries that are being looked
for (useful on Debian/Ubuntu where the alternative MPI installs are each
appended with their name, e.g. mpicc.mpich and mpicc.lam)
Cache variable improvements
- Instead of the previous plural cache variables a list-of-variables
approach is now in place. Permits correcting individual variables
instead of having to wade through a list, also speeds up the search
process and increases comfort by eliminating duplicate entries in
LIBRARIES over languages
- MPIEXEC was corrected to MPIEXEC_EXECUTABLE in order to fix the
grouping in the CMake GUI for the variable (previously ungrouped)
Add variable `CMAKE_CODEBLOCKS_EXCLUDE_EXTERNAL_FILES` to optionally
exclude files from outside the project root from the project file
written by the CodeBlocks extra generator. This optionally restores
logic that had been removed by commit v2.8.3~40^2 (CodeBlocks Generator:
Do not omit files in the project file listing, 2010-10-05) in response
to QTCREATORBUG-2250.
Issue: #12110Fixes: #17188
The KWSys `SystemTools::SplitProgramFromArgs` implementation goes into
an infinite loop when the value is just " " (a space). Since the
"program path with unquoted spaces plus command-line arguments"
operation it is trying to provide is poorly defined (string parsing
should not depend on filesystem content), just stop using it.
Instead consider the main two use cases the old approach tried to handle:
* The value is the name or absolute path of a program with no quoting
or escaping, but also no command-line arguments. In this case we
can use the value as given with no parsing, and assume no arguments.
* The value is a command-line string containing the program name/path
plus arguments. In this case we now assume that the command line
is properly quoted or escaped.
Fixes: #17262
