Export the INCLUDES DESTINATION without appending to the
INTERFACE_INCLUDE_DIRECTORIES of the target itself. That way, a target
can be exported multiple times with different INCLUDES DESTINATION
without unintended cross-pollution of export sets.
9cf3547 Add the INTERFACE_SYSTEM_INCLUDE_DIRECTORIES target property.
1925cff Add a SYSTEM parameter to target_include_directories (#14180)
286f227 Extend the cmTargetPropCommandBase interface property handling.
83498d4 Store system include directories in the cmTarget.
f1fcbe3 Add Target API to determine if an include is a system include.
2679a34 Remove unused variable.
Unlike other target properties, this does not have a corresponding
non-INTERFACE variant.
This allows propagation of system attribute on include directories
from link dependents.
This property is generated only for targets which have recorded
policy CMP0022 as NEW, and a compatibility mode is added to
additionally export the old interfaces in that case too.
If the old interfaces are not exported, the generated export files
require CMake 2.8.12. Because the unit tests use a version which
is not yet called 2.8.12, temporarily require a lower version.
dc1d025 OS X: Add test for rpaths on Mac.
8576b3f OS X: Add support for @rpath in export files.
00d71bd Xcode: Add rpath support in Xcode generator.
94e7fef OS X: Add RPATH support for Mac.
This fixes bug #13797.
The kinds of changes applied in 373faae5 for frameworks are now
applied to CFBundle. The prefix and suffix for CFBundles are
now handled in cmTarget::GetFullNameInternal.
Make handling of directory separators consistent between
non-bundle and bundle code.
Remove xcode specific flag from cmTarget when getting install_name.
Add (more) consistent convenience functions in cmTarget to get
directories inside of bundles and frameworks to add files to.
This refactor also fixes bug #12263 where frameworks
had the wrong install name when SKIP_BUILD_RPATH.
Also make install_name for frameworks consistent between Makefile
and Xcode generator.
This allows for example, the buildsystem to use names like 'boost_any'
instead of the overly generic 'any', and still be able to generate
IMPORTED targets called 'boost::any'.
In commit 0c727b90 (install(EXPORT): Force absolute paths for usr-move,
2013-03-08) and commit d4774140 (configure_package_config_file: force
absolute paths for usr-move, 2013-01-24) we supported Linux
distributions implementing the "/usr move" by assuming that installation
to (/usr)?/lib(64)? represents a non-relocatable system package.
When cross-compiling one may prepare a package for installation into a
system location on a target machine but install the package files on the
*host* machine inside another path for use with CMAKE_FIND_ROOT_PATH.
In this case the package development files must still be relocatable.
Handle "/usr move" with a new approach that works with relocatable
files. Teach configure_package_config_file and install(EXPORT) to
generate special logic in a package configuration file or targets file
for installation under (/usr)?/lib(64)?. Teach the file to recognize
when it is loaded through a symlink that refers to the same realpath as
its original install destination. In such a case, use the original
install prefix. Otherwise, compute the prefix relative to the current
file location to make it relocatable.
Check that source and binary directories are not part of the
INTERFACE_INCLUDE_DIRECTORIES for installed IMPORTED targets.
This is limited to directories which do not contain generator
expressions to evaluate. Such paths can only be checked at time
of use of the imported target, which will be done in a follow up
patch.
If the absolute install(EXPORT) destination for the CMAKE_INSTALL_PREFIX
used during configuration is under (/usr)?/lib(64)? then assume the
current build is for a system package installation instead of a
relocatable distribution. Generate an absolute path for _IMPORT_PREFIX
in the target exports file instead of generating code to compute the
value relative to the file location. This is necessary for
distributions implementing a move to /usr such as:
https://wiki.archlinux.org/index.php/DeveloperWiki:usrlib
"All files in the /lib directory have been moved to /usr/lib and now
/lib is a symlink to usr/lib."
The relative path computation is not reliable because the targets file
could be installed through cross-prefix a symlink and loaded without it
or vice versa.
A similar change was made for package configuration file generation by
commit d4774140 (configure_package_config_file: force absolute paths for
usr-move, 2013-01-24).
The member variable is checked to determine whether to call
HandleMissingTarget(). As that could be called during the loop in
the comming commits, ensure that it contains all targets being
exported.
Previously it was necessary for writers of Config files
which incude exported target files to write the guard themselves, but
this was not immediately obvious or documented. Options for them
would be to use a variable, or an INHERITED directory property in an
effort to avoid accidental name clashes in all contexts in
which find_package can be used.
Getting this right requires boiler plate code, so generate a simpler
check automatically instead.
Before, cmExportFileGenerator::ComplainAboutMissingTarget() was a virtual
function which had to be implemented in the subclasses. It is not
anymore. Instead, there is now a virtual function
HandleMissingTargets(), which is implemented in the two subclasses.
This makes e.g. dealing correctly with APPEND mode easier.
Alex
Now, if an imported target depends on a library which must come
from some other export set, cmake generates a check which errors
out if that target does not exist. I guess instead of completely
erroring out it would be better to only make the find_package() fail.
Alex
If a target is exported, and a library it depends on is not part
of the same export set, before this patch cmake errored out.
With this patch, it now checks whether the missing target
is exported somewhere else exactly once, and accepts in this
case (because then it can determine the namespace for the
missing target and use this).
Alex
Typical <package>Config.cmake files for find_package() rely only on the
files generated by install(EXPORT). They might be wrong, for whatever
reasons, like people manually deleted files, projects were packaged
wrong by distributions, whatever. To protect against this, add checks
that the file locations we are importing actually exist on disk.
Alex
This converts the CMake license to a pure 3-clause OSI-approved BSD
License. We drop the previous license clause requiring modified
versions to be plainly marked. We also update the CMake copyright to
cover the full development time range.
New method cmExportInstallFileGenerator::GetConfigImportFileGlob
computes the globbing expression that an installed export file uses to
load its per-configuration support files.
- Move runtime path ordering out of cmComputeLinkInformation
into its own class cmOrderRuntimeDirectories.
- Create an instance of cmOrderRuntimeDirectories for runtime
path ordering and another instance for dependent library
path ordering.
- Replace CMAKE_DEPENDENT_SHARED_LIBRARY_MODE with explicit
CMAKE_LINK_DEPENDENT_LIBRARY_FILES boolean.
- Create CMAKE_LINK_DEPENDENT_LIBRARY_DIRS boolean.
- Create variables to specify -rpath-link flags:
CMAKE_SHARED_LIBRARY_RPATH_LINK_<LANG>_FLAG
CMAKE_EXECUTABLE_RPATH_LINK_<LANG>_FLAG
- Enable -rpath-link flag on Linux and QNX.
- Documentation and error message updates
- Shared libs and executables with exports may now have
explicit transitive link dependencies specified
- Created LINK_INTERFACE_LIBRARIES and related properties
- Exported targets get the interface libraries as their
IMPORTED_LINK_LIBRARIES property.
- The export() and install(EXPORT) commands now give
an error when a linked target is not included since
the user can change the interface libraries instead
of adding the target.
- Imported bundles have the MACOSX_BUNDLE property set
- Added cmTarget::IsAppBundleOnApple method to simplify checks
- Document BUNDLE keyword in INSTALL command
- Updated IMPORTED_LOCATION property documentation for bundles
- Updated ExportImport test to test bundles
- Imported frameworks have the FRAMEWORK property set
- Added cmTarget::IsFrameworkOnApple method to simplify checks
- Also remove separate IMPORTED_ENABLE_EXPORTS property and just use ENABLE_EXPORTS since, like FRAMEWORK, it just represents the target type.
- Document FRAMEWORK keyword in INSTALL command.
- Updated IMPORTED_LOCATION property documentation for Frameworks
- Created cmExportFileGenerator hierarchy to implement export file generation
- Installed exports use per-config import files loaded by a central one.
- Include soname of shared libraries in import information
- Renamed PREFIX to NAMESPACE in INSTALL(EXPORT) and EXPORT() commands
- Move addition of CMAKE_INSTALL_PREFIX to destinations to install generators
- Import files compute the installation prefix relative to their location when loaded
- Add mapping of importer configurations to importee configurations
- Rename IMPORT targets to IMPORTED targets to distinguish from windows import libraries
- Scope IMPORTED targets within directories to isolate them
- Place all properties created by import files in the IMPORTED namespace
- Document INSTALL(EXPORT) and EXPORT() commands.
- Document IMPORTED signature of add_executable and add_library
- Enable finding of imported targets in cmComputeLinkDepends
