This patch solves the problem of installing both: Device and Simulator
libraries on iOS. Before only one of them was installed.
If the IOS_INSTALL_COMBINED property is set on a target, a
special install hook will be activated which builds the corresponding
target and combines both at the install location.
The original patch was contributed by Ruslan Baratov, and polished by
Gregor Jasny.
Explicitly enable deprecated warnings by default, via the
cmake::GetSuppressDeprecatedWarnings method, which signals
suppression is turned off unless the CMake variables are set
as required.
Add tests and update the documentation for the new
functionality.
Make the documentation for the 'CMAKE_ERROR_DEPRECATED' CMake
variable consistent with the documentation for the
'CMAKE_WARN_DEPRECATED' CMake variable, in terms of wording.
Add 'deprecated' warning options type, to allow setting
CMAKE_WARN_DEPRECATED via the -W '-Wdeprecated' and
'-Wno-deprecated' options.
Add tests for new options and updated documentation.
Teach the VS 2015 generator to produce a WindowsTargetPlatformVersion
value. Use the CMAKE_SYSTEM_VERSION to specify the version and if not
set choose a default based on available SDKs. Activate this behavior
when targeting Windows 10.
Co-Author: Brad King <brad.king@kitware.com>
Teach CMakeDetermineSystem to check for a CMAKE_SYSTEM_VERSION setting
even when CMAKE_SYSTEM_NAME is not set. This will allow builds on the
host OS to target other versions of the OS without full cross-compiling.
The changes in commit c96fe0b4 (cmake: Add -W options to control
deprecation warnings and errors, 2015-07-28) fail to account for
-Wdev warnings produced by places in CMake other than message().
This causes a regression in which -Wno-dev fails to suppress such
warnings. Revert the feature until it can be revised accordingly.
Add documentation and tests for the existing
CTEST_CUSTOM_MAXIMUM_PASSED_TEST_OUTPUT_SIZE
CTEST_CUSTOM_MAXIMUM_FAILED_TEST_OUTPUT_SIZE
CTest variables.
Improve formatting, primarily by:
* Adding links to relevant commands, properties, generators, and so on.
* Converting code, symbols, paths, and so on to fixed-width fonts.
* Hard wrapping lines to 80 characters or less.
Use the CMAKE_LINK_SEARCH_START_STATIC and CMAKE_LINK_SEARCH_END_STATIC
variables to initialize the LINK_SEARCH_START_STATIC and
LINK_SEARCH_END_STATIC target properties respectively.
Refactor the -Wdev and -Wno-dev to use a generic -W parser that follows
the GCC pattern. Include support for setting CMAKE_ERROR_DEPRECATED and
CMAKE_WARN_DEPRECATED via the deprecated warning. Add -Werror=dev and
-Wno-error=dev options so that dev warning options are in line with
deprecated warning options. Use a new CMAKE_SUPPRESS_DEVELOPER_ERRORS
internal cache entry to store the above new dev options persistently.
Add tests for new options and updated cmake documentation and release
notes to list new options.
The --trace option is helpful, but sometimes, what you're looking for is
deep under many layers of function calls and figuring out what instance
of the function call you're looking at is tedious to determine (usually
involving patching and message()). Instead, add a --trace-expand option
to trace while expanding commands into what CMake actually sees.
Add variable CTEST_CHANGE_ID to configure the setting. This allows
CTest clients to give CDash information about what change is being
tested so that CDash can take actions to report the results (e.g. to a
pull request page).
Extend the Nsight Tegra project generator to add bunch of properties
with the backing variables to fine-tune the generated projects.
Add target properties that map to all "Configuration" PropertyGroups for
each configuration:
* ANDROID_ARCH
* ANDROID_STL_TYPE
Add target properties that map to the AntBuild section of vcxproj files:
* ANDROID_ANT_ADDITIONAL_OPTIONS
* ANDROID_ASSETS_DIRECTORIES
* ANDROID_JAR_DEPENDENCIES
* ANDROID_JAR_DIRECTORIES
* ANDROID_JAVA_SOURCE_DIR
* ANDROID_NATIVE_LIB_DEPENDENCIES
* ANDROID_NATIVE_LIB_DIRECTORIES
* ANDROID_PROCESS_MAX
* ANDROID_PROGUARD
* ANDROID_PROGUARD_CONFIG_PATH
* ANDROID_SECURE_PROPS_PATH
* ANDROID_SKIP_ANT_STEP
Reviewed-by: Dmitry Polyanitsa <dpolyanitsa@nvidia.com>
8f86407c Windows: Optionally generate DLL module definition files automatically
069aa93b bindexplib: Add support for "/bigobj" format objects
61bbbdcf bindexplib: Fix treatment of some symbols
de70c922 bindexplib: Teach DumpFile to return errors
8ea69dfe bindexplib: Build source as part of CMakeLib
2963cb2a bindexplib: Wrap long lines
4ff09893 bindexplib: Drop code that CMake does not need
7de8276c bindexplib: Add copyright/license notice block
65086ad7 bindexplib: Import original implementation from CERN
Create target property WINDOWS_EXPORT_ALL_SYMBOLS to automatically
generate a module definition file from MS-compatible .obj files and give
it to the linker in order to export all symbols from the .dll part of a
SHARED library.
Add a TestLoad setting to CTest that can be set via a new --test-load
command-line option, CTEST_TEST_LOAD variable, or TEST_LOAD option to
the ctest_test command. Teach cmCTestMultiProcessHandler to measure
the CPU load and avoid starting tests that may take more than the
spare load currently available. The expression
<current_load> + <test_processors> <= <max-load>
must be true to start a new test.
Co-Author: Zack Galbreath <zack.galbreath@kitware.com>
54676a0e Help: Add notes for topic 'ConcurrentFortran-compiler-id'
7cd539b1 Add support for Concurrent Fortran 77 Compiler
0d204c1c CMakeDetermineCompilerId: Try matching compiler output to detect id
5f0dad75 CMakeDetermineCompilerId: Refactor id build/check loop logic
c65a060e CMakeDetermineCompilerId: Optionally try some flags before no flags
The Concurrent Fortran compiler (ccur.com) is available on Linux and can
be used much like the GNU Fortran compiler. Currently it has no
preprocessor symbols to identify it so we need to detect it by matching
compiler output.
Suggested-by: Anthony Ette <Anthony.R.Ette@controlsdata.com>
Create a <LANG>_COMPILER_LAUNCHER target property (initialized by a
CMAKE_<LANG>_COMPILER_LAUNCHER variable) to specify a compiler launcher
tool. This will supersede the CMAKE_<LANG>_COMPILER_ARG1 approach to
using such tools. The old approach set CMAKE_<LANG>_COMPILER to the
launcher tool while the new approach leaves this variable set to the
actual compiler.
Implement this property for Makefile and Ninja generators. It cannot be
implemented for VS or Xcode generators as the IDE build tools offer no
such hooks.
The test for this variable was removed in commit v2.8.8~330^2~7 (complex:
Remove ancient unused ComplexRelativePaths test, 2011-12-23).
Commit v3.1.0-rc1~425^2~2 (backtrace: Convert to local paths in
IssueMessage, 2014-03-12) appears to have accidentally made some backtraces
print relative paths with the variable because conversions which used to be
done at configure time, before the variable had an effect are now potentially
done at generate time.
The documentation of the variable says not to use it, and the docs are wrong in
that the variable actually applies in per-directory scope.
The read of the variable makes it harder to split conversion methods from
cmLocalGenerator where they don't belong. Remove it now.
Create a <LANG>_INCLUDE_WHAT_YOU_USE target property (initialized by a
CMAKE_<LANG>_INCLUDE_WHAT_YOU_USE variable) to specify an IWYU command
line to be run along with the compiler.
Add sections to the cmake-buildsystem(7) manual and cross-reference
them with relevant variables and target properties. This avoids
duplicating the information and allows it to be more detailed.
66b641f4 Help: Add notes for topic 'add-GreenHills-MULTI-generator'
48004d9d Add a 'Green Hills MULTI' generator on Windows
051d8be1 cmLocalGenerator: Constify some cmTarget and cmGeneratorTarget arguments
Green Hills MULTI is an IDE for embedded real-time systems. The IDE's
product page can be found here:
http://www.ghs.com/products/MULTI_IDE.html
It supports cross compiling on ARM, Intel x86, and other architectures
with various operating systems. The IDE exists on Linux and Windows
host systems, but CMake will currently only generate the project files
on Windows host systems.
882f48e5 Link libraries by full path even in implicit directories
318cd370 Help: Add link target for Find Modules section of cmake-developer.7
1535dcd8 Tests: Teach RunCMake to optionally merge command output to stdout
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
If the CMAKE_CROSSCOMPILING_EMULATOR variable is defined, and
CMAKE_CROSSCOMPILING is TRUE, then use CMAKE_CROSSCOMPILING_EMULATOR to run
the try_run executables. This prevents the need to populate
TryRunResults.cmake when cross compiling.
Extend sentences in other documentation linking to this manual to
say that it has a list of supported compilers.
Co-Author: Brad King <brad.king@kitware.com>
Add CROSSCOMPILING_EMULATOR target property for executables. This is used by
subsequent patches to run exectuables created for the target system when
crosscompiling. The property is initialized by the
CMAKE_CROSSCOMPILING_EMULATOR variable when defined.
This will allow us to use a value other than just the config name
for the project OutputDirectory setting used for $(OutDir).
Also use $(ConfigurationName) instead of $(OutDir) for the link
directory configuration suffix since that is a hard-coded instance of
a use case for CMAKE_CFG_INTDIR.
The "cmakexbuild" wrapper is not needed for Xcode 4 and above, and the
path to it may change when CMake moves. Avoid storing a specific path
to a build program in CMakeCache.txt and instead compute the value for
CMAKE_MAKE_PROGRAM on demand. However, if a user does set the value
explicitly then honor it.
This does for Xcode what commit v3.0.0-rc1~260^2~4 (VS: Switch to
internal CMAKE_MAKE_PROGRAM lookup by generators, 2013-11-15) did for
Visual Studio generators.
Also add a 'CMAKE_ANDROID_API_MIN' variable to set the property
default. Teach the VS generator to write the MIN API value into
Nsight Tegra project files.
Copy CMAKE_EXE_LINKER_FLAGS into the test project generated by
try_compile, just like we already copy CMAKE_<LANG>_FLAGS.
Add CMake Policy CMP0056 to activate this behavior in a compatible way,
but do not warn by default when the policy is not set since it will
affect all try_compile calls.
Extend the RunCMake.try_compile test with a case covering this behavior
for each policy setting.
With PushScope and PopScope, keeping track of another bit of data for
each scope isn't easy. Instead, store it as another CMake variable so it
gets implicitly tracked along with everything else.
This works in a revert of commit
7d674b5f0b.
Also add a 'CMAKE_ANDROID_GUI' variable to set the property default
so a project can easily make all executables Android applications.
An Android application executable file has the same extension as a
shared library (.so).
When CMAKE_SYSTEM_NAME is 'Android', check for an installation of
'NVIDIA Nsight Tegra Visual Studio Edition' and generate .vcxproj
files for the "Tegra-Android" platform. Also make the installed
version available in a CMAKE_VS_NsightTegra_VERSION variable.
be6a555d Tests: Test setting a generator platform in a toolchain file
d506fee8 Tests: Use -A option to pass generator platform selection
11c9ddd6 ExternalProject: Use -A option to pass generator platform
29bd843e CTest: Use -A option to pass generator platform selection
eb7d8156 cmake: Add -A option to specify a generator platform
Define the 'cmake -A' option to set CMAKE_GENERATOR_PLATFORM
without having to spell out the whole variable name. We choose
the name '-A' for "platform" because '-P' is already taken, and
in the common use case the "platform" is actually an architecture
(e.g. x64).
Teach the RunCMake test infrastructure to use -A to pass the generator
platform. Extend the RunCMake.GeneratorPlatform test with a case to
verify that the -A option cannot be repeated.
Reject the option by default. It will be implemented on a per-generator
basis. Pass the setting into try_compile project generation. Add cache
entry CMAKE_GENERATOR_PLATFORM and associated variable documentation to
hold the value persistently.
Add a RunCMake.GeneratorPlatform test to cover basic use cases for the
option. Verify that CMAKE_GENERATOR_PLATFORM is empty by default, and
that it is rejected when the generator does not support a user setting.
653529ce CTest: Allow / to be in the build name, and be consistent with the build name
39b5df2f ctest_update: Add CTEST_UPDATE_VERSION_ONLY option to only note the version
This allows ctest_update to get the current version without actually
changing the repository. This is useful when using Jenkins or an
external project to update the source to a specific version, but you
still want the current version to show up in CDash.
This commit adds support for ThreadSanitizer to ctest. ThreadSanitizer
is part of the clang compiler and also gcc 4.8 and later. You have to
compile the code with special flags. Then your code gets the the
ThreadSanitizer ability built into it. To pass options to the
ThreadSanitizer you use an environment variable. This commit teaches
ctest to parse the output from ThreadSanitizer and send it to CDash.
f0e298ad Help: Add notes for topic 'vs14-generator'
5c105140 Tests: Simplify LoadCommand tests
b1cbd577 FindBoost: Add -vc140 mangling for VS 14
bdc7d9c8 VS14: Fix Cl and Link flag tables as previous versions
d96b3f68 VS14: Generate flag tables from MSBuild v140 tool files
65624c39 VS14: Add Visual Studio 14 generator (#14982)
8635ac23 Tests/Preprocess: Remove unnecessary VS version tests
Call the generator "Visual Studio 14" without any year because this
version of VS does not provide a year in the product name.
Copy cmGlobalVisualStudio12Generator to cmGlobalVisualStudio14Generator
and update version numbers accordingly. Add the VS14 enumeration value.
Teach the platform module Windows-MSVC to set MSVC14 and document the
variable. Teach module InstallRequiredSystemLibraries to look for the VS
14 runtime libraries.
Teach tests CheckCompilerRelatedVariables, VSExternalInclude, and
RunCMake.GeneratorToolset to treat VS 14 as they do VS 10, 11, and 12.
Co-Author: Pawel Stopinski <diokhan@go2.pl>
Create a variable to allow users to control which installation
messages are printed. In particular, provide a "LAZY" setting
that prints "Installing" messages but not "Up-to-date" messages.
This is desirable for incremental re-installations.
Suggested-by: J Decker <d3ck0r@gmail.com>
Delay use of CMAKE_GENERATOR_TOOLSET until the CMakeSystem.cmake
file has been configured and loaded during the first project() or
enable_language() command. This gives the toolchain file named by
CMAKE_TOOLCHAIN_FILE a chance to set CMAKE_GENERATOR_TOOLSET. This
point is still early enough to set the generator toolset prior to
the initialization of any languages that might use the toolset.
The cmake::GeneratorToolset member variable remains an indication
of what was specified by the -T option or loaded from the cache.
It does not need to be updated based on the toolchain file setting.
The cmMakefile::TryCompile can still pass cmake::GeneratorToolset
into the inner instance because the try-compiled project will do
platform and language initialization using the CMakeSystem module
configured for the outer project.
Extend the RunCMake.GeneratorToolset test with cases that use a
toolchain file to set CMAKE_GENERATOR_TOOLSET.
Add support for Cobertura coverage files written by Java.
Add a test which uses the report from a Java run of Cobertura to calculate coverage.
In the documentation of CTEST_COVERAGE_COMMAND, give a sample .sh file to merge
the Cobertura .ser files and generate the XML report from the merged file.
Link to it from the documentation of related properties, variables
and commands.
Extend the cmake-developer(7) documentation with notes on
extending feature support for compilers.
Add properties and variables corresponding to CXX equivalents.
Add features for c_function_prototypes (C90), c_restrict (C99),
c_variadic_macros (C99) and c_static_assert (C11). This feature
set can be extended later.
Add a <PREFIX>_RESTRICT symbol define to WriteCompilerDetectionHeader
to conditionally represent the c_restrict feature.
ba387cb8 Help: Add notes for topic 'package-disable-registry'
be8ae960 Allow the Package Registry to be disabled (#14849)
d09fda5d Tests: Improve FindPackageTest for in-source builds
ac24a1c0 Tests: Improve FindPackageTest exported package version
When a project is packaged for redistribution the local package
registries should not be updated or consulted. They are for developers.
Add variables to disable use of package registries globally:
* CMAKE_EXPORT_NO_PACKAGE_REGISTRY that disables the export(PACKAGE)
command
* CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY that disables the User Package
Registry in all the find_package calls.
* CMAKE_FIND_PACKAGE_NO_SYSTEM_PACKAGE_REGISTRY that disables the
System Package Registry in all the find_package calls.
Update documentation and unit tests.