Qemu GUI written in C# visual studio 2003. This is the source code of preview 6 I have done. The code have not been cleanup I commit a binary version of it as well. for not every one can compile it, and we should only include it with qemu when we are doing a release. so people with very lite knowlegws can config qemu as they like. I did speak with fireball he did think it was good idea to commit it to rosapps. See the todo.txt what left be done.

svn path=/trunk/rosapps/Qemu GUI/; revision=81

AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

Qemu GUI.csproj

@@ -0,0 +1,123 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{88020C53-D88A-4488-A479-E7ED0310D3D3}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = "App.ico"
+                AssemblyKeyContainerName = ""
+                AssemblyName = "Qemu GUI"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "WinExe"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "Qemu_GUI"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "..\..\..\..\..\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "..\..\..\..\..\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.Drawing"
+                    AssemblyName = "System.Drawing"
+                    HintPath = "..\..\..\..\..\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Drawing.dll"
+                />
+                <Reference
+                    Name = "System.Windows.Forms"
+                    AssemblyName = "System.Windows.Forms"
+                    HintPath = "..\..\..\..\..\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Windows.Forms.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "..\..\..\..\..\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "App.ico"
+                    BuildAction = "Content"
+                />
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Form1.cs"
+                    SubType = "Form"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Form1.resx"
+                    DependentUpon = "Form1.cs"
+                    BuildAction = "EmbeddedResource"
+                />
+                <File
+                    RelPath = "Icon1.ico"
+                    BuildAction = "Content"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

Qemu GUI.csproj.user

@@ -0,0 +1,48 @@
+<VisualStudioProject>
+    <CSHARP LastOpenVersion = "7.10.3077" >
+        <Build>
+            <Settings ReferencePath = "" >
+                <Config
+                    Name = "Debug"
+                    EnableASPDebugging = "false"
+                    EnableASPXDebugging = "false"
+                    EnableUnmanagedDebugging = "false"
+                    EnableSQLServerDebugging = "false"
+                    RemoteDebugEnabled = "false"
+                    RemoteDebugMachine = ""
+                    StartAction = "Project"
+                    StartArguments = ""
+                    StartPage = ""
+                    StartProgram = ""
+                    StartURL = ""
+                    StartWorkingDirectory = ""
+                    StartWithIE = "true"
+                />
+                <Config
+                    Name = "Release"
+                    EnableASPDebugging = "false"
+                    EnableASPXDebugging = "false"
+                    EnableUnmanagedDebugging = "false"
+                    EnableSQLServerDebugging = "false"
+                    RemoteDebugEnabled = "false"
+                    RemoteDebugMachine = ""
+                    StartAction = "Project"
+                    StartArguments = ""
+                    StartPage = ""
+                    StartProgram = ""
+                    StartURL = ""
+                    StartWorkingDirectory = ""
+                    StartWithIE = "false"
+                />
+            </Settings>
+        </Build>
+        <OtherProjectSettings
+            CopyProjectDestinationFolder = ""
+            CopyProjectUncPath = ""
+            CopyProjectOption = "0"
+            ProjectView = "ProjectFiles"
+            ProjectTrust = "0"
+        />
+    </CSHARP>
+</VisualStudioProject>
+

Qemu GUI.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Qemu GUI", "Qemu GUI.csproj", "{88020C53-D88A-4488-A479-E7ED0310D3D3}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{88020C53-D88A-4488-A479-E7ED0310D3D3}.Debug.ActiveCfg = Debug|.NET
+		{88020C53-D88A-4488-A479-E7ED0310D3D3}.Debug.Build.0 = Debug|.NET
+		{88020C53-D88A-4488-A479-E7ED0310D3D3}.Release.ActiveCfg = Release|.NET
+		{88020C53-D88A-4488-A479-E7ED0310D3D3}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

ToDO.txt

@@ -0,0 +1,32 @@
+TODO
+Debug menu
+VNC server -> GetArg does not build this string setting yet
+
+Tools menu
+VDK Tool -> need implement all settings for it
+
+Network
+Have not yet plan the GUI layout
+eveything need be implement. 
+
+About 
+load config -> case "-soundhw": -> loadarg does 
+not set any audio card yet-
+
+Config
+Show current configurations with file name
+Have not yet plan the GUI layout
+
+Some setting for qemu are not plan to be implement is
+-snapshot 
+-Set virtual RAM
+-k language
+-audio-help
+-pidfile file
+-win2k-hack
+
+
+
+
+
+