0637a7f088
* vm: add bhyve support bhyve is FreeBSD's native hypervisor. Because it is missing snapshot support and user networking, some additional configuration on the host is required. However, unlike QEMU on FreeBSD, bhyve can make use of hardware virtualization features and is thus faster. * docs/freebsd: document bhyve support |
||
---|---|---|
.. | ||
found_bugs.md | ||
README.md |
FreeBSD
This page contains instructions to set up syzkaller to run on a FreeBSD or Linux host and fuzz an amd64 FreeBSD kernel running in a virtual machine.
Currently, syzkaller can fuzz FreeBSD running under bhyve, QEMU or GCE (Google Compute Engine). Regardless of the mode of operation, some common steps must be followed.
Setting up a host
syz-manager
is the component of syzkaller that manages target VMs. It runs on a host system and automatically creates, runs and destroys VMs which share a user-specified image file.
Setting up a FreeBSD host
To build syzkaller out of the box, a recent version of FreeBSD 13.0-CURRENT must be used for the host. Older versions of FreeBSD can be used but will require manual tweaking.
The required dependencies can be installed by running:
# pkg install bash gcc git gmake go llvm
When using bhyve as the VM backend, a DHCP server must also be installed:
# pkg install dnsmasq
To checkout the syzkaller sources, run:
$ go get -u -d github.com/google/syzkaller/...
and the binaries can be built by running:
$ cd go/src/github.com/google/syzkaller/
$ gmake
Once this completes, a syz-manager
executable should be available under bin/
.
Setting up a Linux host
To build Go binaries do:
make manager fuzzer execprog TARGETOS=freebsd
To build C syz-executor
binary, copy executor/*
files to a FreeBSD machine and build there with:
c++ executor/executor_freebsd.cc -o syz-executor -O1 -lpthread -DGOOS=\"freebsd\" -DGIT_REVISION=\"CURRENT_GIT_REVISION\"
Then, copy out the binary back to host into bin/freebsd_amd64
dir.
Setting up the FreeBSD VM
It is easiest to start with a snapshot image of FreeBSD. Fetch a QCOW2 disk image for QEMU or a raw image for GCE or bhyve.
To enable KCOV on FreeBSD, a custom kernel must be compiled. It is easiest to do this in the VM itself. Use QEMU to start a VM using the downloaded image:
$ qemu-system-x86_64 -hda $IMAGEFILE -nographic -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=e1000
When the boot loader menu is printed, escape to the loader prompt and enter the commands set console="comconsole"
and boot
. Once you reach a login prompt, log in as root and add a couple of configuration parameters to /boot/loader.conf
:
# cat <<__EOF__ >>/boot/loader.conf
autoboot_delay="-1"
console="comconsole"
__EOF__
Fetch a copy of the FreeBSD kernel sources and place them in /usr/src
. For instance, to get a copy of the current development sources, run:
# pkg install git
# git clone --depth=1 --branch=master https://github.com/freebsd/freebsd /usr/src
To create a custom kernel configuration file for syzkaller and build a new kernel, run:
# cd /usr/src/sys/amd64/conf
# cat <<__EOF__ > SYZKALLER
include "./GENERIC"
ident SYZKALLER
options COVERAGE
options KCOV
__EOF__
# cd /usr/src
# make -j $(sysctl -n hw.ncpu) KERNCONF=SYZKALLER buildkernel
# make KERNCONF=SYZKALLER installkernel
# shutdown -r now
When the VM is restarted, verify that uname -i
prints SYZKALLER
to confirm that your newly built kernel is running.
Then, to permit remote access to the VM, you must configure DHCP and enable sshd
:
# sysrc sshd_enable=YES
# sysrc ifconfig_DEFAULT=DHCP
If you plan to run the syscall executor as root, ensure that root SSH logins are permitted by adding PermitRootLogin without-password
to /etc/ssh/sshd_config
. Otherwise, create a new user with adduser
. Install an ssh key for the user and verify that you can SSH into the VM from the host. Note that bhyve requires the use of the root user for the time being.
Running Under bhyve
Some additional steps are required on the host in order to use bhyve. First, ensure that the host system is at r346550 or later. Second, since bhyve currently does not support disk image snapshots, ZFS must be used to provide equivalent functionality. Create a ZFS data set and copy the VM image there. The data set can also be used to store the syzkaller workdir.
# zfs create data/syzkaller
# cp FreeBSD-13.0-CURRENT-amd64.raw /data/syzkaller
Third, configure networking and DHCP for the VM instances:
# ifconfig bridge create
bridge0
# ifconfig bridge0 inet 169.254.0.1
# echo 'dhcp-range=169.254.0.2,169.254.0.254,255.255.255.0' > /usr/local/etc/dnsmasq.conf
# echo 'interface=bridge0' >> /usr/local/etc/dnsmasq.conf
# sysrc dnsmasq_enable=YES
# service dnsmasq start
# echo 'net.link.tap.up_on_open=1' >> /etc/sysctl.conf
# sysctl net.link.tap.up_on_open=1
Finally, ensure that the bhyve kernel module is loaded:
# kldload vmm
Putting It All Together
If all of the above worked, create a freebsd.cfg
configuration file with the following contents (alter paths as necessary):
{
"name": "freebsd",
"target": "freebsd/amd64",
"http": ":10000",
"workdir": "/workdir",
"syzkaller": "/gopath/src/github.com/google/syzkaller",
"sshkey": "/freebsd_id_rsa",
"sandbox": "none",
"procs": 8,
}
If running the fuzzer under QEMU, add:
"image": "/FreeBSD-13.0-CURRENT-amd64.qcow2",
"type": "qemu",
"vm": {
"count": 10,
"cpu": 4,
"mem": 2048
}
For GCE, add the following instead (alter the storage bucket path as necessary):
"image": "/FreeBSD-13.0-CURRENT-amd64.raw",
"type": "gce",
"vm": {
"count": 10,
"instance_type": "n1-standard-4",
"gcs_path": "syzkaller"
}
For bhyve, we need to specify the VM image snapshot name and networking info:
"image": "/data/syzkaller/FreeBSD-13.0-CURRENT-amd64.raw",
"type": "bhyve",
"vm": {
"count": 10,
"bridge": "bridge0",
"hostip": "169.254.0.1",
"dataset": "data/syzkaller"
}
Then, start syz-manager
with:
$ bin/syz-manager -config freebsd.cfg
It should start printing output along the lines of:
booting test machines...
wait for the connection from test machine...
machine check: 253 calls enabled, kcov=true, kleakcheck=false, faultinjection=false, comps=false
executed 3622, cover 1219, crashes 0, repro 0
executed 7921, cover 1239, crashes 0, repro 0
executed 32807, cover 1244, crashes 0, repro 0
executed 35803, cover 1248, crashes 0, repro 0
If something does not work, try adding the -debug
flag to syz-manager
.
Missing things
- System call descriptions.
sys/freebsd/*.txt
is a dirty copy fromsys/linux/*.txt
with everything that does not compile dropped. We need to go through syscalls and verify/fix/extend them, including devices/ioctls/etc. - Currently only the
amd64
arch is supported. It would be useful to support a 32-bit executor in order to cover 32-bit compatibility syscalls. - We should support fuzzing the Linux compatibility subsystem.
pkg/csource
needs to be taught how to generate/build C reproducers.pkg/host
needs to be taught how to detect supported syscalls/devices.pkg/report
/pkg/symbolizer
need to be taught how to extract/symbolize kernel crash reports.- KASAN for FreeBSD would be useful.
- On Linux we have emission of exernal networking/USB traffic into kernel using tun/gadgetfs. Implementing these for FreeBSD could uncover a number of high-profile bugs.