reactos/wine
1
0
Fork 0
mirror of https://github.com/reactos/wine.git synced 2024-12-12 22:05:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
affd20d9c8
wine/dlls/ddraw/ddraw.c

3639 lines
128 KiB
C
Raw Blame History

/*
* Copyright 1997-2000 Marcus Meissner
* Copyright 1998-2000 Lionel Ulmer
* Copyright 2000-2001 TransGaming Technologies Inc.
* Copyright 2006 Stefan Dösinger
* Copyright 2008 Denver Gingerich
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include "config.h"
#include "wine/port.h"
#include <assert.h>
#include <stdarg.h>
#include <string.h>
#include <stdlib.h>
#define COBJMACROS
#define NONAMELESSUNION
#include "windef.h"
#include "winbase.h"
#include "winerror.h"
#include "wingdi.h"
#include "wine/exception.h"
#include "ddraw.h"
#include "d3d.h"
#include "ddraw_private.h"
#include "wine/debug.h"
WINE_DEFAULT_DEBUG_CHANNEL(ddraw);
static BOOL IDirectDrawImpl_DDSD_Match(const DDSURFACEDESC2* requested, const DDSURFACEDESC2* provided);
static HRESULT IDirectDrawImpl_AttachD3DDevice(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary);
static HRESULT IDirectDrawImpl_CreateNewSurface(IDirectDrawImpl *This, DDSURFACEDESC2 *pDDSD, IDirectDrawSurfaceImpl **ppSurf, UINT level);
static HRESULT IDirectDrawImpl_CreateGDISwapChain(IDirectDrawImpl *This, IDirectDrawSurfaceImpl *primary);
/* Device identifier. Don't relay it to WineD3D */
static const DDDEVICEIDENTIFIER2 deviceidentifier =
{
"display",
"DirectDraw HAL",
{ { 0x00010001, 0x00010001 } },
0, 0, 0, 0,
/* a8373c10-7ac4-4deb-849a-009844d08b2d */
{0xa8373c10,0x7ac4,0x4deb, {0x84,0x9a,0x00,0x98,0x44,0xd0,0x8b,0x2d}},
0
};
/*****************************************************************************
* IUnknown Methods
*****************************************************************************/
/*****************************************************************************
* IDirectDraw7::QueryInterface
*
* Queries different interfaces of the DirectDraw object. It can return
* IDirectDraw interfaces in version 1, 2, 4 and 7, and IDirect3D interfaces
* in version 1, 2, 3 and 7. An IDirect3DDevice can be created with this
* method.
* The returned interface is AddRef()-ed before it's returned
*
* Used for version 1, 2, 4 and 7
*
* Params:
* refiid: Interface ID asked for
* obj: Used to return the interface pointer
*
* Returns:
* S_OK if an interface was found
* E_NOINTERFACE if the requested interface wasn't found
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_QueryInterface(IDirectDraw7 *iface,
REFIID refiid,
void **obj)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%s,%p)\n", This, debugstr_guid(refiid), obj);
/* Can change surface impl type */
EnterCriticalSection(&ddraw_cs);
/* According to COM docs, if the QueryInterface fails, obj should be set to NULL */
*obj = NULL;
if(!refiid)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Check DirectDraw Interfaces */
if ( IsEqualGUID( &IID_IUnknown, refiid ) ||
IsEqualGUID( &IID_IDirectDraw7, refiid ) )
{
*obj = This;
TRACE("(%p) Returning IDirectDraw7 interface at %p\n", This, *obj);
}
else if ( IsEqualGUID( &IID_IDirectDraw4, refiid ) )
{
*obj = &This->IDirectDraw4_vtbl;
TRACE("(%p) Returning IDirectDraw4 interface at %p\n", This, *obj);
}
else if ( IsEqualGUID( &IID_IDirectDraw3, refiid ) )
{
/* This Interface exists in ddrawex.dll, it is implemented in a wrapper */
WARN("IDirectDraw3 is not valid in ddraw.dll\n");
*obj = NULL;
LeaveCriticalSection(&ddraw_cs);
return E_NOINTERFACE;
}
else if ( IsEqualGUID( &IID_IDirectDraw2, refiid ) )
{
*obj = &This->IDirectDraw2_vtbl;
TRACE("(%p) Returning IDirectDraw2 interface at %p\n", This, *obj);
}
else if ( IsEqualGUID( &IID_IDirectDraw, refiid ) )
{
*obj = &This->IDirectDraw_vtbl;
TRACE("(%p) Returning IDirectDraw interface at %p\n", This, *obj);
}
/* Direct3D
* The refcount unit test revealed that an IDirect3D7 interface can only be queried
* from a DirectDraw object that was created as an IDirectDraw7 interface. No idea
* who had this idea and why. The older interfaces can query and IDirect3D version
* because they are all created as IDirectDraw(1). This isn't really crucial behavior,
* and messy to implement with the common creation function, so it has been left out here.
*/
else if ( IsEqualGUID( &IID_IDirect3D , refiid ) ||
IsEqualGUID( &IID_IDirect3D2 , refiid ) ||
IsEqualGUID( &IID_IDirect3D3 , refiid ) ||
IsEqualGUID( &IID_IDirect3D7 , refiid ) )
{
/* Check the surface implementation */
if(This->ImplType == SURFACE_UNKNOWN)
{
/* Apps may create the IDirect3D Interface before the primary surface.
* set the surface implementation */
This->ImplType = SURFACE_OPENGL;
TRACE("(%p) Choosing OpenGL surfaces because a Direct3D interface was requested\n", This);
}
else if(This->ImplType != SURFACE_OPENGL && DefaultSurfaceType == SURFACE_UNKNOWN)
{
ERR("(%p) The App is requesting a D3D device, but a non-OpenGL surface type was choosen. Prepare for trouble!\n", This);
ERR(" (%p) You may want to contact wine-devel for help\n", This);
/* Should I assert(0) here??? */
}
else if(This->ImplType != SURFACE_OPENGL)
{
WARN("The app requests a Direct3D interface, but non-opengl surfaces where set in winecfg\n");
/* Do not abort here, only reject 3D Device creation */
}
if ( IsEqualGUID( &IID_IDirect3D , refiid ) )
{
This->d3dversion = 1;
*obj = &This->IDirect3D_vtbl;
TRACE(" returning Direct3D interface at %p.\n", *obj);
}
else if ( IsEqualGUID( &IID_IDirect3D2 , refiid ) )
{
This->d3dversion = 2;
*obj = &This->IDirect3D2_vtbl;
TRACE(" returning Direct3D2 interface at %p.\n", *obj);
}
else if ( IsEqualGUID( &IID_IDirect3D3 , refiid ) )
{
This->d3dversion = 3;
*obj = &This->IDirect3D3_vtbl;
TRACE(" returning Direct3D3 interface at %p.\n", *obj);
}
else if(IsEqualGUID( &IID_IDirect3D7 , refiid ))
{
This->d3dversion = 7;
*obj = &This->IDirect3D7_vtbl;
TRACE(" returning Direct3D7 interface at %p.\n", *obj);
}
}
else if (IsEqualGUID(refiid, &IID_IWineD3DDeviceParent))
{
*obj = &This->device_parent_vtbl;
}
/* Unknown interface */
else
{
ERR("(%p)->(%s, %p): No interface found\n", This, debugstr_guid(refiid), obj);
LeaveCriticalSection(&ddraw_cs);
return E_NOINTERFACE;
}
IUnknown_AddRef( (IUnknown *) *obj );
LeaveCriticalSection(&ddraw_cs);
return S_OK;
}
/*****************************************************************************
* IDirectDraw7::AddRef
*
* Increases the interfaces refcount, basically
*
* DDraw refcounting is a bit tricky. The different DirectDraw interface
* versions have individual refcounts, but the IDirect3D interfaces do not.
* All interfaces are from one object, that means calling QueryInterface on an
* IDirectDraw7 interface for an IDirectDraw4 interface does not create a new
* IDirectDrawImpl object.
*
* That means all AddRef and Release implementations of IDirectDrawX work
* with their own counter, and IDirect3DX::AddRef thunk to IDirectDraw (1),
* except of IDirect3D7 which thunks to IDirectDraw7
*
* Returns: The new refcount
*
*****************************************************************************/
static ULONG WINAPI
IDirectDrawImpl_AddRef(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
ULONG ref = InterlockedIncrement(&This->ref7);
TRACE("(%p) : incrementing IDirectDraw7 refcount from %u.\n", This, ref -1);
if(ref == 1) InterlockedIncrement(&This->numIfaces);
return ref;
}
/*****************************************************************************
* IDirectDrawImpl_Destroy
*
* Destroys a ddraw object if all refcounts are 0. This is to share code
* between the IDirectDrawX::Release functions
*
* Params:
* This: DirectDraw object to destroy
*
*****************************************************************************/
void
IDirectDrawImpl_Destroy(IDirectDrawImpl *This)
{
/* Clear the cooplevel to restore window and display mode */
IDirectDraw7_SetCooperativeLevel((IDirectDraw7 *)This, NULL, DDSCL_NORMAL);
/* Destroy the device window if we created one */
if(This->devicewindow != 0)
{
TRACE(" (%p) Destroying the device window %p\n", This, This->devicewindow);
DestroyWindow(This->devicewindow);
This->devicewindow = 0;
}
/* Unregister the window class */
UnregisterClassA(This->classname, 0);
EnterCriticalSection(&ddraw_cs);
list_remove(&This->ddraw_list_entry);
LeaveCriticalSection(&ddraw_cs);
/* Release the attached WineD3D stuff */
IWineD3DDevice_Release(This->wineD3DDevice);
IWineD3D_Release(This->wineD3D);
/* Now free the object */
HeapFree(GetProcessHeap(), 0, This);
}
/*****************************************************************************
* IDirectDraw7::Release
*
* Decreases the refcount. If the refcount falls to 0, the object is destroyed
*
* Returns: The new refcount
*****************************************************************************/
static ULONG WINAPI
IDirectDrawImpl_Release(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
ULONG ref = InterlockedDecrement(&This->ref7);
TRACE("(%p)->() decrementing IDirectDraw7 refcount from %u.\n", This, ref +1);
if(ref == 0)
{
ULONG ifacecount = InterlockedDecrement(&This->numIfaces);
if(ifacecount == 0) IDirectDrawImpl_Destroy(This);
}
return ref;
}
/*****************************************************************************
* IDirectDraw methods
*****************************************************************************/
/*****************************************************************************
* IDirectDraw7::SetCooperativeLevel
*
* Sets the cooperative level for the DirectDraw object, and the window
* assigned to it. The cooperative level determines the general behavior
* of the DirectDraw application
*
* Warning: This is quite tricky, as it's not really documented which
* cooperative levels can be combined with each other. If a game fails
* after this function, try to check the cooperative levels passed on
* Windows, and if it returns something different.
*
* If you think that this function caused the failure because it writes a
* fixme, be sure to run again with a +ddraw trace.
*
* What is known about cooperative levels (See the ddraw modes test):
* DDSCL_EXCLUSIVE and DDSCL_FULLSCREEN must be used with each other
* DDSCL_NORMAL is not compatible with DDSCL_EXCLUSIVE or DDSCL_FULLSCREEN
* DDSCL_SETFOCUSWINDOW can be passed only in DDSCL_NORMAL mode, but after that
* DDSCL_FULLSCREEN can be activated
* DDSCL_SETFOCUSWINDOW may only be used with DDSCL_NOWINDOWCHANGES
*
* Handled flags: DDSCL_NORMAL, DDSCL_FULLSCREEN, DDSCL_EXCLUSIVE,
* DDSCL_SETFOCUSWINDOW (partially),
* DDSCL_MULTITHREADED (work in progress)
*
* Unhandled flags, which should be implemented
* DDSCL_SETDEVICEWINDOW: Sets a window specially used for rendering (I don't
* expect any difference to a normal window for wine)
* DDSCL_CREATEDEVICEWINDOW: Tells ddraw to create its own window for
* rendering (Possible test case: Half-life)
*
* Unsure about these: DDSCL_FPUSETUP DDSCL_FPURESERVE
*
* These don't seem very important for wine:
* DDSCL_ALLOWREBOOT, DDSCL_NOWINDOWCHANGES, DDSCL_ALLOWMODEX
*
* Returns:
* DD_OK if the cooperative level was set successfully
* DDERR_INVALIDPARAMS if the passed cooperative level combination is invalid
* DDERR_HWNDALREADYSET if DDSCL_SETFOCUSWINDOW is passed in exclusive mode
* (Probably others too, have to investigate)
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_SetCooperativeLevel(IDirectDraw7 *iface,
HWND hwnd,
DWORD cooplevel)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
HWND window;
TRACE("(%p)->(%p,%08x)\n",This,hwnd,cooplevel);
DDRAW_dump_cooperativelevel(cooplevel);
EnterCriticalSection(&ddraw_cs);
/* Get the old window */
window = This->dest_window;
/* Tests suggest that we need one of them: */
if(!(cooplevel & (DDSCL_SETFOCUSWINDOW |
DDSCL_NORMAL |
DDSCL_EXCLUSIVE )))
{
TRACE("Incorrect cooplevel flags, returning DDERR_INVALIDPARAMS\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Handle those levels first which set various hwnds */
if(cooplevel & DDSCL_SETFOCUSWINDOW)
{
/* This isn't compatible with a lot of flags */
if(cooplevel & ( DDSCL_MULTITHREADED |
DDSCL_FPUSETUP |
DDSCL_FPUPRESERVE |
DDSCL_ALLOWREBOOT |
DDSCL_ALLOWMODEX |
DDSCL_SETDEVICEWINDOW |
DDSCL_NORMAL |
DDSCL_EXCLUSIVE |
DDSCL_FULLSCREEN ) )
{
TRACE("Called with incompatible flags, returning DDERR_INVALIDPARAMS\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
else if( (This->cooperative_level & DDSCL_FULLSCREEN) && window)
{
TRACE("Setting DDSCL_SETFOCUSWINDOW with an already set window, returning DDERR_HWNDALREADYSET\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_HWNDALREADYSET;
}
This->focuswindow = hwnd;
/* Won't use the hwnd param for anything else */
hwnd = NULL;
/* Use the focus window for drawing too */
This->dest_window = This->focuswindow;
/* Destroy the device window, if we have one */
if(This->devicewindow)
{
DestroyWindow(This->devicewindow);
This->devicewindow = NULL;
}
}
/* DDSCL_NORMAL or DDSCL_FULLSCREEN | DDSCL_EXCLUSIVE */
if(cooplevel & DDSCL_NORMAL)
{
/* Can't coexist with fullscreen or exclusive */
if(cooplevel & (DDSCL_FULLSCREEN | DDSCL_EXCLUSIVE) )
{
TRACE("(%p) DDSCL_NORMAL is not compative with DDSCL_FULLSCREEN or DDSCL_EXCLUSIVE\n", This);
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Switching from fullscreen? */
if(This->cooperative_level & DDSCL_FULLSCREEN)
{
/* Restore the display mode */
IDirectDraw7_RestoreDisplayMode(iface);
This->cooperative_level &= ~DDSCL_FULLSCREEN;
This->cooperative_level &= ~DDSCL_EXCLUSIVE;
This->cooperative_level &= ~DDSCL_ALLOWMODEX;
}
/* Don't override focus windows or private device windows */
if( hwnd &&
!(This->focuswindow) &&
!(This->devicewindow) &&
(hwnd != window) )
{
This->dest_window = hwnd;
}
}
else if(cooplevel & DDSCL_FULLSCREEN)
{
/* Needs DDSCL_EXCLUSIVE */
if(!(cooplevel & DDSCL_EXCLUSIVE) )
{
TRACE("(%p) DDSCL_FULLSCREEN needs DDSCL_EXCLUSIVE\n", This);
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Need a HWND
if(hwnd == 0)
{
TRACE("(%p) DDSCL_FULLSCREEN needs a HWND\n", This);
return DDERR_INVALIDPARAMS;
}
*/
This->cooperative_level &= ~DDSCL_NORMAL;
/* Don't override focus windows or private device windows */
if( hwnd &&
!(This->focuswindow) &&
!(This->devicewindow) &&
(hwnd != window) )
{
This->dest_window = hwnd;
}
}
else if(cooplevel & DDSCL_EXCLUSIVE)
{
TRACE("(%p) DDSCL_EXCLUSIVE needs DDSCL_FULLSCREEN\n", This);
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
if(cooplevel & DDSCL_CREATEDEVICEWINDOW)
{
/* Don't create a device window if a focus window is set */
if( !(This->focuswindow) )
{
HWND devicewindow = CreateWindowExA(0, This->classname, "DDraw device window",
WS_POPUP, 0, 0,
GetSystemMetrics(SM_CXSCREEN),
GetSystemMetrics(SM_CYSCREEN),
NULL, NULL, GetModuleHandleA(0), NULL);
ShowWindow(devicewindow, SW_SHOW); /* Just to be sure */
TRACE("(%p) Created a DDraw device window. HWND=%p\n", This, devicewindow);
This->devicewindow = devicewindow;
This->dest_window = devicewindow;
}
}
if(cooplevel & DDSCL_MULTITHREADED && !(This->cooperative_level & DDSCL_MULTITHREADED))
{
/* Enable thread safety in wined3d */
IWineD3DDevice_SetMultithreaded(This->wineD3DDevice);
}
/* Unhandled flags */
if(cooplevel & DDSCL_ALLOWREBOOT)
WARN("(%p) Unhandled flag DDSCL_ALLOWREBOOT, harmless\n", This);
if(cooplevel & DDSCL_ALLOWMODEX)
WARN("(%p) Unhandled flag DDSCL_ALLOWMODEX, harmless\n", This);
if(cooplevel & DDSCL_FPUSETUP)
WARN("(%p) Unhandled flag DDSCL_FPUSETUP, harmless\n", This);
/* Store the cooperative_level */
This->cooperative_level |= cooplevel;
TRACE("SetCooperativeLevel retuning DD_OK\n");
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
*
* Helper function for SetDisplayMode and RestoreDisplayMode
*
* Implements DirectDraw's SetDisplayMode, but ignores the value of
* ForceRefreshRate, since it is already handled by
* IDirectDrawImpl_SetDisplayMode. RestoreDisplayMode can use this function
* without worrying that ForceRefreshRate will override the refresh rate. For
* argument and return value documentation, see
* IDirectDrawImpl_SetDisplayMode.
*
*****************************************************************************/
static HRESULT
IDirectDrawImpl_SetDisplayModeNoOverride(IDirectDraw7 *iface,
DWORD Width,
DWORD Height,
DWORD BPP,
DWORD RefreshRate,
DWORD Flags)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
WINED3DDISPLAYMODE Mode;
HRESULT hr;
TRACE("(%p)->(%d,%d,%d,%d,%x): Relay!\n", This, Width, Height, BPP, RefreshRate, Flags);
EnterCriticalSection(&ddraw_cs);
if( !Width || !Height )
{
ERR("Width=%d, Height=%d, what to do?\n", Width, Height);
/* It looks like Need for Speed Porsche Unleashed expects DD_OK here */
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/* Check the exclusive mode
if(!(This->cooperative_level & DDSCL_EXCLUSIVE))
return DDERR_NOEXCLUSIVEMODE;
* This is WRONG. Don't know if the SDK is completely
* wrong and if there are any conditions when DDERR_NOEXCLUSIVE
* is returned, but Half-Life 1.1.1.1 (Steam version)
* depends on this
*/
Mode.Width = Width;
Mode.Height = Height;
Mode.RefreshRate = RefreshRate;
switch(BPP)
{
case 8: Mode.Format = WINED3DFMT_P8; break;
case 15: Mode.Format = WINED3DFMT_X1R5G5B5; break;
case 16: Mode.Format = WINED3DFMT_R5G6B5; break;
case 24: Mode.Format = WINED3DFMT_R8G8B8; break;
case 32: Mode.Format = WINED3DFMT_X8R8G8B8; break;
}
/* TODO: The possible return values from msdn suggest that
* the screen mode can't be changed if a surface is locked
* or some drawing is in progress
*/
/* TODO: Lose the primary surface */
hr = IWineD3DDevice_SetDisplayMode(This->wineD3DDevice,
0, /* First swapchain */
&Mode);
LeaveCriticalSection(&ddraw_cs);
switch(hr)
{
case WINED3DERR_NOTAVAILABLE: return DDERR_UNSUPPORTED;
default: return hr;
}
}
/*****************************************************************************
* IDirectDraw7::SetDisplayMode
*
* Sets the display screen resolution, color depth and refresh frequency
* when in fullscreen mode (in theory).
* Possible return values listed in the SDK suggest that this method fails
* when not in fullscreen mode, but this is wrong. Windows 2000 happily sets
* the display mode in DDSCL_NORMAL mode without an hwnd specified.
* It seems to be valid to pass 0 for With and Height, this has to be tested
* It could mean that the current video mode should be left as-is. (But why
* call it then?)
*
* Params:
* Height, Width: Screen dimension
* BPP: Color depth in Bits per pixel
* Refreshrate: Screen refresh rate
* Flags: Other stuff
*
* Returns
* DD_OK on success
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_SetDisplayMode(IDirectDraw7 *iface,
DWORD Width,
DWORD Height,
DWORD BPP,
DWORD RefreshRate,
DWORD Flags)
{
if (force_refresh_rate != 0)
{
TRACE("ForceRefreshRate overriding passed-in refresh rate (%d Hz) to %d Hz\n", RefreshRate, force_refresh_rate);
RefreshRate = force_refresh_rate;
}
return IDirectDrawImpl_SetDisplayModeNoOverride(iface, Width, Height, BPP,
RefreshRate, Flags);
}
/*****************************************************************************
* IDirectDraw7::RestoreDisplayMode
*
* Restores the display mode to what it was at creation time. Basically.
*
* A problem arises when there are 2 DirectDraw objects using the same hwnd:
* -> DD_1 finds the screen at 1400x1050x32 when created, sets it to 640x480x16
* -> DD_2 is created, finds the screen at 640x480x16, sets it to 1024x768x32
* -> DD_1 is released. The screen should be left at 1024x768x32.
* -> DD_2 is released. The screen should be set to 1400x1050x32
* This case is unhandled right now, but Empire Earth does it this way.
* (But perhaps there is something in SetCooperativeLevel to prevent this)
*
* The msdn says that this method resets the display mode to what it was before
* SetDisplayMode was called. What if SetDisplayModes is called 2 times??
*
* Returns
* DD_OK on success
* DDERR_NOEXCLUSIVE mode if the device isn't in fullscreen mode
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_RestoreDisplayMode(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)\n", This);
return IDirectDrawImpl_SetDisplayModeNoOverride(iface,
This->orig_width, This->orig_height, This->orig_bpp, 0, 0);
}
/*****************************************************************************
* IDirectDraw7::GetCaps
*
* Returns the drives capabilities
*
* Used for version 1, 2, 4 and 7
*
* Params:
* DriverCaps: Structure to write the Hardware accelerated caps to
* HelCaps: Structure to write the emulation caps to
*
* Returns
* This implementation returns DD_OK only
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetCaps(IDirectDraw7 *iface,
DDCAPS *DriverCaps,
DDCAPS *HELCaps)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
DDCAPS caps;
WINED3DCAPS winecaps;
HRESULT hr;
DDSCAPS2 ddscaps = {0, 0, 0, 0};
TRACE("(%p)->(%p,%p)\n", This, DriverCaps, HELCaps);
/* One structure must be != NULL */
if( (!DriverCaps) && (!HELCaps) )
{
ERR("(%p) Invalid params to IDirectDrawImpl_GetCaps\n", This);
return DDERR_INVALIDPARAMS;
}
memset(&caps, 0, sizeof(caps));
memset(&winecaps, 0, sizeof(winecaps));
caps.dwSize = sizeof(caps);
EnterCriticalSection(&ddraw_cs);
hr = IWineD3DDevice_GetDeviceCaps(This->wineD3DDevice, &winecaps);
if(FAILED(hr)) {
WARN("IWineD3DDevice::GetDeviceCaps failed\n");
LeaveCriticalSection(&ddraw_cs);
return hr;
}
hr = IDirectDraw7_GetAvailableVidMem(iface, &ddscaps, &caps.dwVidMemTotal, &caps.dwVidMemFree);
LeaveCriticalSection(&ddraw_cs);
if(FAILED(hr)) {
WARN("IDirectDraw7::GetAvailableVidMem failed\n");
return hr;
}
caps.dwCaps = winecaps.DirectDrawCaps.Caps;
caps.dwCaps2 = winecaps.DirectDrawCaps.Caps2;
caps.dwCKeyCaps = winecaps.DirectDrawCaps.CKeyCaps;
caps.dwFXCaps = winecaps.DirectDrawCaps.FXCaps;
caps.dwPalCaps = winecaps.DirectDrawCaps.PalCaps;
caps.ddsCaps.dwCaps = winecaps.DirectDrawCaps.ddsCaps;
caps.dwSVBCaps = winecaps.DirectDrawCaps.SVBCaps;
caps.dwSVBCKeyCaps = winecaps.DirectDrawCaps.SVBCKeyCaps;
caps.dwSVBFXCaps = winecaps.DirectDrawCaps.SVBFXCaps;
caps.dwVSBCaps = winecaps.DirectDrawCaps.VSBCaps;
caps.dwVSBCKeyCaps = winecaps.DirectDrawCaps.VSBCKeyCaps;
caps.dwVSBFXCaps = winecaps.DirectDrawCaps.VSBFXCaps;
caps.dwSSBCaps = winecaps.DirectDrawCaps.SSBCaps;
caps.dwSSBCKeyCaps = winecaps.DirectDrawCaps.SSBCKeyCaps;
caps.dwSSBFXCaps = winecaps.DirectDrawCaps.SSBFXCaps;
/* Even if WineD3D supports 3D rendering, remove the cap if ddraw is configured
* not to use it
*/
if(DefaultSurfaceType == SURFACE_GDI) {
caps.dwCaps &= ~DDCAPS_3D;
caps.ddsCaps.dwCaps &= ~(DDSCAPS_3DDEVICE | DDSCAPS_MIPMAP | DDSCAPS_TEXTURE | DDSCAPS_ZBUFFER);
}
if(winecaps.DirectDrawCaps.StrideAlign != 0) {
caps.dwCaps |= DDCAPS_ALIGNSTRIDE;
caps.dwAlignStrideAlign = winecaps.DirectDrawCaps.StrideAlign;
}
if(DriverCaps)
{
DD_STRUCT_COPY_BYSIZE(DriverCaps, &caps);
if (TRACE_ON(ddraw))
{
TRACE("Driver Caps :\n");
DDRAW_dump_DDCAPS(DriverCaps);
}
}
if(HELCaps)
{
DD_STRUCT_COPY_BYSIZE(HELCaps, &caps);
if (TRACE_ON(ddraw))
{
TRACE("HEL Caps :\n");
DDRAW_dump_DDCAPS(HELCaps);
}
}
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::Compact
*
* No idea what it does, MSDN says it's not implemented.
*
* Returns
* DD_OK, but this is unchecked
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_Compact(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)\n", This);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetDisplayMode
*
* Returns information about the current display mode
*
* Exists in Version 1, 2, 4 and 7
*
* Params:
* DDSD: Address of a surface description structure to write the info to
*
* Returns
* DD_OK
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetDisplayMode(IDirectDraw7 *iface,
DDSURFACEDESC2 *DDSD)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
HRESULT hr;
WINED3DDISPLAYMODE Mode;
DWORD Size;
TRACE("(%p)->(%p): Relay\n", This, DDSD);
EnterCriticalSection(&ddraw_cs);
/* This seems sane */
if(!DDSD)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* The necessary members of LPDDSURFACEDESC and LPDDSURFACEDESC2 are equal,
* so one method can be used for all versions (Hopefully)
*/
hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice,
0 /* swapchain 0 */,
&Mode);
if( hr != D3D_OK )
{
ERR(" (%p) IWineD3DDevice::GetDisplayMode returned %08x\n", This, hr);
LeaveCriticalSection(&ddraw_cs);
return hr;
}
Size = DDSD->dwSize;
memset(DDSD, 0, Size);
DDSD->dwSize = Size;
DDSD->dwFlags |= DDSD_HEIGHT | DDSD_WIDTH | DDSD_PIXELFORMAT | DDSD_PITCH | DDSD_REFRESHRATE;
DDSD->dwWidth = Mode.Width;
DDSD->dwHeight = Mode.Height;
DDSD->u2.dwRefreshRate = 60;
DDSD->ddsCaps.dwCaps = 0;
DDSD->u4.ddpfPixelFormat.dwSize = sizeof(DDSD->u4.ddpfPixelFormat);
PixelFormat_WineD3DtoDD(&DDSD->u4.ddpfPixelFormat, Mode.Format);
DDSD->u1.lPitch = Mode.Width * DDSD->u4.ddpfPixelFormat.u1.dwRGBBitCount / 8;
if(TRACE_ON(ddraw))
{
TRACE("Returning surface desc :\n");
DDRAW_dump_surface_desc(DDSD);
}
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetFourCCCodes
*
* Returns an array of supported FourCC codes.
*
* Exists in Version 1, 2, 4 and 7
*
* Params:
* NumCodes: Contains the number of Codes that Codes can carry. Returns the number
* of enumerated codes
* Codes: Pointer to an array of DWORDs where the supported codes are written
* to
*
* Returns
* Always returns DD_OK, as it's a stub for now
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetFourCCCodes(IDirectDraw7 *iface,
DWORD *NumCodes, DWORD *Codes)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
WINED3DFORMAT formats[] = {
WINED3DFMT_YUY2, WINED3DFMT_UYVY, WINED3DFMT_YV12,
WINED3DFMT_DXT1, WINED3DFMT_DXT2, WINED3DFMT_DXT3, WINED3DFMT_DXT4, WINED3DFMT_DXT5,
WINED3DFMT_ATI2N, WINED3DFMT_NVHU, WINED3DFMT_NVHS
};
DWORD count = 0, i, outsize;
HRESULT hr;
WINED3DDISPLAYMODE d3ddm;
WINED3DSURFTYPE type = This->ImplType;
TRACE("(%p)->(%p, %p)\n", This, NumCodes, Codes);
IWineD3DDevice_GetDisplayMode(This->wineD3DDevice,
0 /* swapchain 0 */,
&d3ddm);
outsize = NumCodes && Codes ? *NumCodes : 0;
if(type == SURFACE_UNKNOWN) type = SURFACE_GDI;
for(i = 0; i < (sizeof(formats) / sizeof(formats[0])); i++) {
hr = IWineD3D_CheckDeviceFormat(This->wineD3D,
WINED3DADAPTER_DEFAULT,
WINED3DDEVTYPE_HAL,
d3ddm.Format /* AdapterFormat */,
0 /* usage */,
WINED3DRTYPE_SURFACE,
formats[i],
type);
if(SUCCEEDED(hr)) {
if(count < outsize) {
Codes[count] = formats[i];
}
count++;
}
}
if(NumCodes) {
TRACE("Returning %u FourCC codes\n", count);
*NumCodes = count;
}
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetMonitorFrequency
*
* Returns the monitor's frequency
*
* Exists in Version 1, 2, 4 and 7
*
* Params:
* Freq: Pointer to a DWORD to write the frequency to
*
* Returns
* Always returns DD_OK
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetMonitorFrequency(IDirectDraw7 *iface,
DWORD *Freq)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%p)\n", This, Freq);
/* Ideally this should be in WineD3D, as it concerns the screen setup,
* but for now this should make the games happy
*/
*Freq = 60;
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetVerticalBlankStatus
*
* Returns the Vertical blank status of the monitor. This should be in WineD3D
* too basically, but as it's a semi stub, I didn't create a function there
*
* Params:
* status: Pointer to a BOOL to be filled with the vertical blank status
*
* Returns
* DD_OK on success
* DDERR_INVALIDPARAMS if status is NULL
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetVerticalBlankStatus(IDirectDraw7 *iface,
BOOL *status)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%p)\n", This, status);
/* This looks sane, the MSDN suggests it too */
EnterCriticalSection(&ddraw_cs);
if(!status)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
*status = This->fake_vblank;
This->fake_vblank = !This->fake_vblank;
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetAvailableVidMem
*
* Returns the total and free video memory
*
* Params:
* Caps: Specifies the memory type asked for
* total: Pointer to a DWORD to be filled with the total memory
* free: Pointer to a DWORD to be filled with the free memory
*
* Returns
* DD_OK on success
* DDERR_INVALIDPARAMS of free and total are NULL
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetAvailableVidMem(IDirectDraw7 *iface, DDSCAPS2 *Caps, DWORD *total, DWORD *free)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%p, %p, %p)\n", This, Caps, total, free);
if(TRACE_ON(ddraw))
{
TRACE("(%p) Asked for memory with description: ", This);
DDRAW_dump_DDSCAPS2(Caps);
}
EnterCriticalSection(&ddraw_cs);
/* Todo: System memory vs local video memory vs non-local video memory
* The MSDN also mentions differences between texture memory and other
* resources, but that's not important
*/
if( (!total) && (!free) )
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
if(total) *total = This->total_vidmem;
if(free) *free = IWineD3DDevice_GetAvailableTextureMem(This->wineD3DDevice);
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::Initialize
*
* Initializes a DirectDraw interface.
*
* Params:
* GUID: Interface identifier. Well, don't know what this is really good
* for
*
* Returns
* Returns DD_OK on the first call,
* DDERR_ALREADYINITIALIZED on repeated calls
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_Initialize(IDirectDraw7 *iface,
GUID *Guid)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%s): No-op\n", This, debugstr_guid(Guid));
if(This->initialized)
{
return DDERR_ALREADYINITIALIZED;
}
else
{
return DD_OK;
}
}
/*****************************************************************************
* IDirectDraw7::FlipToGDISurface
*
* "Makes the surface that the GDI writes to the primary surface"
* Looks like some windows specific thing we don't have to care about.
* According to MSDN it permits GDI dialog boxes in FULLSCREEN mode. Good to
* show error boxes ;)
* Well, just return DD_OK.
*
* Returns:
* Always returns DD_OK
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_FlipToGDISurface(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)\n", This);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::WaitForVerticalBlank
*
* This method allows applications to get in sync with the vertical blank
* interval.
* The wormhole demo in the DirectX 7 sdk uses this call, and it doesn't
* redraw the screen, most likely because of this stub
*
* Parameters:
* Flags: one of DDWAITVB_BLOCKBEGIN, DDWAITVB_BLOCKBEGINEVENT
* or DDWAITVB_BLOCKEND
* h: Not used, according to MSDN
*
* Returns:
* Always returns DD_OK
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_WaitForVerticalBlank(IDirectDraw7 *iface,
DWORD Flags,
HANDLE h)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
static BOOL hide = FALSE;
/* This function is called often, so print the fixme only once */
if(!hide)
{
FIXME("(%p)->(%x,%p): Stub\n", This, Flags, h);
hide = TRUE;
}
/* MSDN says DDWAITVB_BLOCKBEGINEVENT is not supported */
if(Flags & DDWAITVB_BLOCKBEGINEVENT)
return DDERR_UNSUPPORTED; /* unchecked */
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetScanLine
*
* Returns the scan line that is being drawn on the monitor
*
* Parameters:
* Scanline: Address to write the scan line value to
*
* Returns:
* Always returns DD_OK
*
*****************************************************************************/
static HRESULT WINAPI IDirectDrawImpl_GetScanLine(IDirectDraw7 *iface, DWORD *Scanline)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
static BOOL hide = FALSE;
WINED3DDISPLAYMODE Mode;
/* This function is called often, so print the fixme only once */
EnterCriticalSection(&ddraw_cs);
if(!hide)
{
FIXME("(%p)->(%p): Semi-Stub\n", This, Scanline);
hide = TRUE;
}
IWineD3DDevice_GetDisplayMode(This->wineD3DDevice,
0,
&Mode);
/* Fake the line sweeping of the monitor */
/* FIXME: We should synchronize with a source to keep the refresh rate */
*Scanline = This->cur_scanline++;
/* Assume 20 scan lines in the vertical blank */
if (This->cur_scanline >= Mode.Height + 20)
This->cur_scanline = 0;
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::TestCooperativeLevel
*
* Informs the application about the state of the video adapter, depending
* on the cooperative level
*
* Returns:
* DD_OK if the device is in a sane state
* DDERR_NOEXCLUSIVEMODE or DDERR_EXCLUSIVEMODEALREADYSET
* if the state is not correct(See below)
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_TestCooperativeLevel(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
HRESULT hr;
TRACE("(%p)\n", This);
EnterCriticalSection(&ddraw_cs);
/* Description from MSDN:
* For fullscreen apps return DDERR_NOEXCLUSIVEMODE if the user switched
* away from the app with e.g. alt-tab. Windowed apps receive
* DDERR_EXCLUSIVEMODEALREADYSET if another application created a
* DirectDraw object in exclusive mode. DDERR_WRONGMODE is returned,
* when the video mode has changed
*/
hr = IWineD3DDevice_TestCooperativeLevel(This->wineD3DDevice);
/* Fix the result value. These values are mapped from their
* d3d9 counterpart.
*/
switch(hr)
{
case WINED3DERR_DEVICELOST:
if(This->cooperative_level & DDSCL_EXCLUSIVE)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_NOEXCLUSIVEMODE;
}
else
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_EXCLUSIVEMODEALREADYSET;
}
case WINED3DERR_DEVICENOTRESET:
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
case WINED3D_OK:
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
case WINED3DERR_DRIVERINTERNALERROR:
default:
ERR("(%p) Unexpected return value %08x from wineD3D, "
" returning DD_OK\n", This, hr);
}
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetGDISurface
*
* Returns the surface that GDI is treating as the primary surface.
* For Wine this is the front buffer
*
* Params:
* GDISurface: Address to write the surface pointer to
*
* Returns:
* DD_OK if the surface was found
* DDERR_NOTFOUND if the GDI surface wasn't found
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetGDISurface(IDirectDraw7 *iface,
IDirectDrawSurface7 **GDISurface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
IWineD3DSurface *Surf;
IDirectDrawSurface7 *ddsurf;
HRESULT hr;
DDSCAPS2 ddsCaps;
TRACE("(%p)->(%p)\n", This, GDISurface);
/* Get the back buffer from the wineD3DDevice and search its
* attached surfaces for the front buffer
*/
EnterCriticalSection(&ddraw_cs);
hr = IWineD3DDevice_GetBackBuffer(This->wineD3DDevice,
0, /* SwapChain */
0, /* first back buffer*/
WINED3DBACKBUFFER_TYPE_MONO,
&Surf);
if( (hr != D3D_OK) ||
(!Surf) )
{
ERR("IWineD3DDevice::GetBackBuffer failed\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_NOTFOUND;
}
/* GetBackBuffer AddRef()ed the surface, release it */
IWineD3DSurface_Release(Surf);
IWineD3DSurface_GetParent(Surf,
(IUnknown **) &ddsurf);
IDirectDrawSurface7_Release(ddsurf); /* For the GetParent */
/* Find the front buffer */
ddsCaps.dwCaps = DDSCAPS_FRONTBUFFER;
hr = IDirectDrawSurface7_GetAttachedSurface(ddsurf,
&ddsCaps,
GDISurface);
if(hr != DD_OK)
{
ERR("IDirectDrawSurface7::GetAttachedSurface failed, hr = %x\n", hr);
}
/* The AddRef is OK this time */
LeaveCriticalSection(&ddraw_cs);
return hr;
}
/*****************************************************************************
* IDirectDraw7::EnumDisplayModes
*
* Enumerates the supported Display modes. The modes can be filtered with
* the DDSD parameter.
*
* Params:
* Flags: can be DDEDM_REFRESHRATES and DDEDM_STANDARDVGAMODES
* DDSD: Surface description to filter the modes
* Context: Pointer passed back to the callback function
* cb: Application-provided callback function
*
* Returns:
* DD_OK on success
* DDERR_INVALIDPARAMS if the callback wasn't set
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_EnumDisplayModes(IDirectDraw7 *iface,
DWORD Flags,
DDSURFACEDESC2 *DDSD,
void *Context,
LPDDENUMMODESCALLBACK2 cb)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
unsigned int modenum, fmt;
WINED3DFORMAT pixelformat = WINED3DFMT_UNKNOWN;
WINED3DDISPLAYMODE mode;
DDSURFACEDESC2 callback_sd;
WINED3DDISPLAYMODE *enum_modes = NULL;
unsigned enum_mode_count = 0, enum_mode_array_size = 0;
WINED3DFORMAT checkFormatList[] =
{
WINED3DFMT_R8G8B8,
WINED3DFMT_A8R8G8B8,
WINED3DFMT_X8R8G8B8,
WINED3DFMT_R5G6B5,
WINED3DFMT_X1R5G5B5,
WINED3DFMT_A1R5G5B5,
WINED3DFMT_A4R4G4B4,
WINED3DFMT_R3G3B2,
WINED3DFMT_A8R3G3B2,
WINED3DFMT_X4R4G4B4,
WINED3DFMT_R10G10B10A2_UNORM,
WINED3DFMT_R8G8B8A8_UNORM,
WINED3DFMT_X8B8G8R8,
WINED3DFMT_A2R10G10B10,
WINED3DFMT_A8P8,
WINED3DFMT_P8
};
TRACE("(%p)->(%p,%p,%p): Relay\n", This, DDSD, Context, cb);
EnterCriticalSection(&ddraw_cs);
/* This looks sane */
if(!cb)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
if(DDSD)
{
if ((DDSD->dwFlags & DDSD_PIXELFORMAT) && (DDSD->u4.ddpfPixelFormat.dwFlags & DDPF_RGB) )
pixelformat = PixelFormat_DD2WineD3D(&DDSD->u4.ddpfPixelFormat);
}
if(!(Flags & DDEDM_REFRESHRATES))
{
enum_mode_array_size = 16;
enum_modes = HeapAlloc(GetProcessHeap(), 0, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size);
if (!enum_modes)
{
ERR("Out of memory\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_OUTOFMEMORY;
}
}
for(fmt = 0; fmt < (sizeof(checkFormatList) / sizeof(checkFormatList[0])); fmt++)
{
if(pixelformat != WINED3DFMT_UNKNOWN && checkFormatList[fmt] != pixelformat)
{
continue;
}
modenum = 0;
while(IWineD3D_EnumAdapterModes(This->wineD3D,
WINED3DADAPTER_DEFAULT,
checkFormatList[fmt],
modenum++,
&mode) == WINED3D_OK)
{
if(DDSD)
{
if(DDSD->dwFlags & DDSD_WIDTH && mode.Width != DDSD->dwWidth) continue;
if(DDSD->dwFlags & DDSD_HEIGHT && mode.Height != DDSD->dwHeight) continue;
}
if(!(Flags & DDEDM_REFRESHRATES))
{
/* DX docs state EnumDisplayMode should return only unique modes. If DDEDM_REFRESHRATES is not set, refresh
* rate doesn't matter when determining if the mode is unique. So modes only differing in refresh rate have
* to be reduced to a single unique result in such case.
*/
BOOL found = FALSE;
unsigned i;
for (i = 0; i < enum_mode_count; i++)
{
if(enum_modes[i].Width == mode.Width && enum_modes[i].Height == mode.Height &&
enum_modes[i].Format == mode.Format)
{
found = TRUE;
break;
}
}
if(found) continue;
}
memset(&callback_sd, 0, sizeof(callback_sd));
callback_sd.dwSize = sizeof(callback_sd);
callback_sd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT);
callback_sd.dwFlags = DDSD_HEIGHT|DDSD_WIDTH|DDSD_PIXELFORMAT|DDSD_PITCH;
if(Flags & DDEDM_REFRESHRATES)
{
callback_sd.dwFlags |= DDSD_REFRESHRATE;
callback_sd.u2.dwRefreshRate = mode.RefreshRate;
}
callback_sd.dwWidth = mode.Width;
callback_sd.dwHeight = mode.Height;
PixelFormat_WineD3DtoDD(&callback_sd.u4.ddpfPixelFormat, mode.Format);
/* Calc pitch and DWORD align like MSDN says */
callback_sd.u1.lPitch = (callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount / 8) * mode.Width;
callback_sd.u1.lPitch = (callback_sd.u1.lPitch + 3) & ~3;
TRACE("Enumerating %dx%dx%d @%d\n", callback_sd.dwWidth, callback_sd.dwHeight, callback_sd.u4.ddpfPixelFormat.u1.dwRGBBitCount,
callback_sd.u2.dwRefreshRate);
if(cb(&callback_sd, Context) == DDENUMRET_CANCEL)
{
TRACE("Application asked to terminate the enumeration\n");
HeapFree(GetProcessHeap(), 0, enum_modes);
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
if(!(Flags & DDEDM_REFRESHRATES))
{
if (enum_mode_count == enum_mode_array_size)
{
WINED3DDISPLAYMODE *new_enum_modes;
enum_mode_array_size *= 2;
new_enum_modes = HeapReAlloc(GetProcessHeap(), 0, enum_modes, sizeof(WINED3DDISPLAYMODE) * enum_mode_array_size);
if (!new_enum_modes)
{
ERR("Out of memory\n");
HeapFree(GetProcessHeap(), 0, enum_modes);
LeaveCriticalSection(&ddraw_cs);
return DDERR_OUTOFMEMORY;
}
enum_modes = new_enum_modes;
}
enum_modes[enum_mode_count++] = mode;
}
}
}
TRACE("End of enumeration\n");
HeapFree(GetProcessHeap(), 0, enum_modes);
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::EvaluateMode
*
* Used with IDirectDraw7::StartModeTest to test video modes.
* EvaluateMode is used to pass or fail a mode, and continue with the next
* mode
*
* Params:
* Flags: DDEM_MODEPASSED or DDEM_MODEFAILED
* Timeout: Returns the amount of seconds left before the mode would have
* been failed automatically
*
* Returns:
* This implementation always DD_OK, because it's a stub
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_EvaluateMode(IDirectDraw7 *iface,
DWORD Flags,
DWORD *Timeout)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
FIXME("(%p)->(%d,%p): Stub!\n", This, Flags, Timeout);
/* When implementing this, implement it in WineD3D */
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetDeviceIdentifier
*
* Returns the device identifier, which gives information about the driver
* Our device identifier is defined at the beginning of this file.
*
* Params:
* DDDI: Address for the returned structure
* Flags: Can be DDGDI_GETHOSTIDENTIFIER
*
* Returns:
* On success it returns DD_OK
* DDERR_INVALIDPARAMS if DDDI is NULL
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetDeviceIdentifier(IDirectDraw7 *iface,
DDDEVICEIDENTIFIER2 *DDDI,
DWORD Flags)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%p,%08x)\n", This, DDDI, Flags);
if(!DDDI)
return DDERR_INVALIDPARAMS;
/* The DDGDI_GETHOSTIDENTIFIER returns the information about the 2D
* host adapter, if there's a secondary 3D adapter. This doesn't apply
* to any modern hardware, nor is it interesting for Wine, so ignore it
*/
*DDDI = deviceidentifier;
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::GetSurfaceFromDC
*
* Returns the Surface for a GDI device context handle.
* Is this related to IDirectDrawSurface::GetDC ???
*
* Params:
* hdc: hdc to return the surface for
* Surface: Address to write the surface pointer to
*
* Returns:
* Always returns DD_OK because it's a stub
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_GetSurfaceFromDC(IDirectDraw7 *iface,
HDC hdc,
IDirectDrawSurface7 **Surface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
FIXME("(%p)->(%p,%p): Stub!\n", This, hdc, Surface);
/* Implementation idea if needed: Loop through all surfaces and compare
* their hdc with hdc. Implement it in WineD3D! */
return DDERR_NOTFOUND;
}
/*****************************************************************************
* IDirectDraw7::RestoreAllSurfaces
*
* Calls the restore method of all surfaces
*
* Params:
*
* Returns:
* Always returns DD_OK because it's a stub
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_RestoreAllSurfaces(IDirectDraw7 *iface)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
FIXME("(%p): Stub\n", This);
/* This isn't hard to implement: Enumerate all WineD3D surfaces,
* get their parent and call their restore method. Do not implement
* it in WineD3D, as restoring a surface means re-creating the
* WineD3DDSurface
*/
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::StartModeTest
*
* Tests the specified video modes to update the system registry with
* refresh rate information. StartModeTest starts the mode test,
* EvaluateMode is used to fail or pass a mode. If EvaluateMode
* isn't called within 15 seconds, the mode is failed automatically
*
* As refresh rates are handled by the X server, I don't think this
* Method is important
*
* Params:
* Modes: An array of mode specifications
* NumModes: The number of modes in Modes
* Flags: Some flags...
*
* Returns:
* Returns DDERR_TESTFINISHED if flags contains DDSMT_ISTESTREQUIRED,
* if no modes are passed, DDERR_INVALIDPARAMS is returned,
* otherwise DD_OK
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_StartModeTest(IDirectDraw7 *iface,
SIZE *Modes,
DWORD NumModes,
DWORD Flags)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
WARN("(%p)->(%p, %d, %x): Semi-Stub, most likely harmless\n", This, Modes, NumModes, Flags);
/* This looks sane */
if( (!Modes) || (NumModes == 0) ) return DDERR_INVALIDPARAMS;
/* DDSMT_ISTESTREQUIRED asks if a mode test is necessary.
* As it is not, DDERR_TESTFINISHED is returned
* (hopefully that's correct
*
if(Flags & DDSMT_ISTESTREQUIRED) return DDERR_TESTFINISHED;
* well, that value doesn't (yet) exist in the wine headers, so ignore it
*/
return DD_OK;
}
/*****************************************************************************
* IDirectDrawImpl_RecreateSurfacesCallback
*
* Enumeration callback for IDirectDrawImpl_RecreateAllSurfaces.
* It re-recreates the WineD3DSurface. It's pretty straightforward
*
*****************************************************************************/
HRESULT WINAPI
IDirectDrawImpl_RecreateSurfacesCallback(IDirectDrawSurface7 *surf,
DDSURFACEDESC2 *desc,
void *Context)
{
IDirectDrawSurfaceImpl *surfImpl = (IDirectDrawSurfaceImpl *)surf;
IDirectDrawImpl *This = surfImpl->ddraw;
IUnknown *Parent;
IParentImpl *parImpl = NULL;
IWineD3DSurface *wineD3DSurface;
IWineD3DSwapChain *swapchain;
HRESULT hr;
void *tmp;
IWineD3DClipper *clipper = NULL;
WINED3DSURFACE_DESC Desc;
WINED3DFORMAT Format;
WINED3DRESOURCETYPE Type;
DWORD Usage;
WINED3DPOOL Pool;
UINT Size;
WINED3DMULTISAMPLE_TYPE MultiSampleType;
DWORD MultiSampleQuality;
UINT Width;
UINT Height;
TRACE("(%p): Enumerated Surface %p\n", This, surfImpl);
/* For the enumeration */
IDirectDrawSurface7_Release(surf);
if(surfImpl->ImplType == This->ImplType) return DDENUMRET_OK; /* Continue */
/* Get the objects */
swapchain = surfImpl->wineD3DSwapChain;
surfImpl->wineD3DSwapChain = NULL;
wineD3DSurface = surfImpl->WineD3DSurface;
IWineD3DSurface_GetParent(wineD3DSurface, &Parent);
IUnknown_Release(Parent); /* For the getParent */
/* Is the parent an IParent interface? */
if(IUnknown_QueryInterface(Parent, &IID_IParent, &tmp) == S_OK)
{
/* It is a IParent interface! */
IUnknown_Release(Parent); /* For the QueryInterface */
parImpl = (IParentImpl *)Parent;
/* Release the reference the parent interface is holding */
IWineD3DSurface_Release(wineD3DSurface);
}
/* get the clipper */
IWineD3DSurface_GetClipper(wineD3DSurface, &clipper);
/* Get the surface properties */
Desc.Format = &Format;
Desc.Type = &Type;
Desc.Usage = &Usage;
Desc.Pool = &Pool;
Desc.Size = &Size;
Desc.MultiSampleType = &MultiSampleType;
Desc.MultiSampleQuality = &MultiSampleQuality;
Desc.Width = &Width;
Desc.Height = &Height;
hr = IWineD3DSurface_GetDesc(wineD3DSurface, &Desc);
if(hr != D3D_OK) return hr;
if(swapchain) {
/* If there's a swapchain, it owns the IParent interface. Create a new one for the
* new surface
*/
parImpl = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(*parImpl));
parImpl->lpVtbl = &IParent_Vtbl;
parImpl->ref = 1;
Parent = (IUnknown *) parImpl;
}
/* Create the new surface */
hr = IWineD3DDevice_CreateSurface(This->wineD3DDevice,
Width, Height, Format,
TRUE /* Lockable */,
FALSE /* Discard */,
surfImpl->mipmap_level,
&surfImpl->WineD3DSurface,
Type,
Usage,
Pool,
MultiSampleType,
MultiSampleQuality,
0 /* SharedHandle */,
This->ImplType,
Parent);
if(hr != D3D_OK)
return hr;
IWineD3DSurface_SetClipper(surfImpl->WineD3DSurface, clipper);
/* Update the IParent if it exists */
if(parImpl)
{
parImpl->child = (IUnknown *) surfImpl->WineD3DSurface;
/* Add a reference for the IParent */
IWineD3DSurface_AddRef(surfImpl->WineD3DSurface);
}
/* TODO: Copy the surface content, except for render targets */
/* If there's a swapchain, it owns the wined3d surfaces. So Destroy
* the swapchain
*/
if(swapchain) {
/* The backbuffers have the swapchain set as well, but the primary
* owns it and destroys it
*/
if(surfImpl->surface_desc.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) {
IWineD3DDevice_UninitGDI(This->wineD3DDevice, D3D7CB_DestroySwapChain);
}
surfImpl->isRenderTarget = FALSE;
} else {
if(IWineD3DSurface_Release(wineD3DSurface) == 0)
TRACE("Surface released successful, next surface\n");
else
ERR("Something's still holding the old WineD3DSurface\n");
}
surfImpl->ImplType = This->ImplType;
if(clipper)
{
IWineD3DClipper_Release(clipper);
}
return DDENUMRET_OK;
}
/*****************************************************************************
* IDirectDrawImpl_RecreateAllSurfaces
*
* A function, that converts all wineD3DSurfaces to the new implementation type
* It enumerates all surfaces with IWineD3DDevice::EnumSurfaces, creates a
* new WineD3DSurface, copies the content and releases the old surface
*
*****************************************************************************/
static HRESULT
IDirectDrawImpl_RecreateAllSurfaces(IDirectDrawImpl *This)
{
DDSURFACEDESC2 desc;
TRACE("(%p): Switch to implementation %d\n", This, This->ImplType);
if(This->ImplType != SURFACE_OPENGL && This->d3d_initialized)
{
/* Should happen almost never */
FIXME("(%p) Switching to non-opengl surfaces with d3d started. Is this a bug?\n", This);
/* Shutdown d3d */
IWineD3DDevice_Uninit3D(This->wineD3DDevice, D3D7CB_DestroyDepthStencilSurface, D3D7CB_DestroySwapChain);
}
/* Contrary: D3D starting is handled by the caller, because it knows the render target */
memset(&desc, 0, sizeof(desc));
desc.dwSize = sizeof(desc);
return IDirectDraw7_EnumSurfaces((IDirectDraw7 *)This, 0, &desc, This, IDirectDrawImpl_RecreateSurfacesCallback);
}
ULONG WINAPI D3D7CB_DestroySwapChain(IWineD3DSwapChain *pSwapChain) {
IUnknown* swapChainParent;
TRACE("(%p) call back\n", pSwapChain);
IWineD3DSwapChain_GetParent(pSwapChain, &swapChainParent);
IUnknown_Release(swapChainParent);
return IUnknown_Release(swapChainParent);
}
ULONG WINAPI D3D7CB_DestroyDepthStencilSurface(IWineD3DSurface *pSurface) {
IUnknown* surfaceParent;
TRACE("(%p) call back\n", pSurface);
IWineD3DSurface_GetParent(pSurface, &surfaceParent);
IUnknown_Release(surfaceParent);
return IUnknown_Release(surfaceParent);
}
/*****************************************************************************
* IDirectDrawImpl_CreateNewSurface
*
* A helper function for IDirectDraw7::CreateSurface. It creates a new surface
* with the passed parameters.
*
* Params:
* DDSD: Description of the surface to create
* Surf: Address to store the interface pointer at
*
* Returns:
* DD_OK on success
*
*****************************************************************************/
static HRESULT
IDirectDrawImpl_CreateNewSurface(IDirectDrawImpl *This,
DDSURFACEDESC2 *pDDSD,
IDirectDrawSurfaceImpl **ppSurf,
UINT level)
{
HRESULT hr;
UINT Width = 0, Height = 0;
WINED3DFORMAT Format = WINED3DFMT_UNKNOWN;
WINED3DRESOURCETYPE ResType = WINED3DRTYPE_SURFACE;
DWORD Usage = 0;
WINED3DSURFTYPE ImplType = This->ImplType;
WINED3DSURFACE_DESC Desc;
IUnknown *Parent;
IParentImpl *parImpl = NULL;
WINED3DPOOL Pool = WINED3DPOOL_DEFAULT;
/* Dummies for GetDesc */
WINED3DPOOL dummy_d3dpool;
WINED3DMULTISAMPLE_TYPE dummy_mst;
UINT dummy_uint;
DWORD dummy_dword;
if (TRACE_ON(ddraw))
{
TRACE(" (%p) Requesting surface desc :\n", This);
DDRAW_dump_surface_desc(pDDSD);
}
/* Select the surface type, if it wasn't choosen yet */
if(ImplType == SURFACE_UNKNOWN)
{
/* Use GL Surfaces if a D3DDEVICE Surface is requested */
if(pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE)
{
TRACE("(%p) Choosing GL surfaces because a 3DDEVICE Surface was requested\n", This);
ImplType = SURFACE_OPENGL;
}
/* Otherwise use GDI surfaces for now */
else
{
TRACE("(%p) Choosing GDI surfaces for 2D rendering\n", This);
ImplType = SURFACE_GDI;
}
/* Policy if all surface implementations are available:
* First, check if a default type was set with winecfg. If not,
* try Xrender surfaces, and use them if they work. Next, check if
* accelerated OpenGL is available, and use GL surfaces in this
* case. If all else fails, use GDI surfaces. If a 3DDEVICE surface
* was created, always use OpenGL surfaces.
*
* (Note: Xrender surfaces are not implemented for now, the
* unaccelerated implementation uses GDI to render in Software)
*/
/* Store the type. If it needs to be changed, all WineD3DSurfaces have to
* be re-created. This could be done with IDirectDrawSurface7::Restore
*/
This->ImplType = ImplType;
}
else
{
if((pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE ) &&
(This->ImplType != SURFACE_OPENGL ) && DefaultSurfaceType == SURFACE_UNKNOWN)
{
/* We have to change to OpenGL,
* and re-create all WineD3DSurfaces
*/
ImplType = SURFACE_OPENGL;
This->ImplType = ImplType;
TRACE("(%p) Re-creating all surfaces\n", This);
IDirectDrawImpl_RecreateAllSurfaces(This);
TRACE("(%p) Done recreating all surfaces\n", This);
}
else if(This->ImplType != SURFACE_OPENGL && pDDSD->ddsCaps.dwCaps & DDSCAPS_3DDEVICE)
{
WARN("The application requests a 3D capable surface, but a non-opengl surface was set in the registry\n");
/* Do not fail surface creation, only fail 3D device creation */
}
}
if (!(pDDSD->ddsCaps.dwCaps & (DDSCAPS_VIDEOMEMORY | DDSCAPS_SYSTEMMEMORY)) &&
!((pDDSD->ddsCaps.dwCaps & DDSCAPS_TEXTURE) && (pDDSD->ddsCaps.dwCaps2 & DDSCAPS2_TEXTUREMANAGE)) )
{
/* Tests show surfaces without memory flags get these flags added right after creation. */
pDDSD->ddsCaps.dwCaps |= DDSCAPS_LOCALVIDMEM | DDSCAPS_VIDEOMEMORY;
}
/* Get the correct wined3d usage */
if (pDDSD->ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE |
DDSCAPS_3DDEVICE ) )
{
Usage |= WINED3DUSAGE_RENDERTARGET;
pDDSD->ddsCaps.dwCaps |= DDSCAPS_VISIBLE;
}
if (pDDSD->ddsCaps.dwCaps & (DDSCAPS_OVERLAY))
{
Usage |= WINED3DUSAGE_OVERLAY;
}
if(This->depthstencil || (pDDSD->ddsCaps.dwCaps & DDSCAPS_ZBUFFER) )
{
/* The depth stencil creation callback sets this flag.
* Set the WineD3D usage to let it know that it's a depth
* Stencil surface.
*/
Usage |= WINED3DUSAGE_DEPTHSTENCIL;
}
if(pDDSD->ddsCaps.dwCaps & DDSCAPS_SYSTEMMEMORY)
{
Pool = WINED3DPOOL_SYSTEMMEM;
}
else if(pDDSD->ddsCaps.dwCaps2 & DDSCAPS2_TEXTUREMANAGE)
{
Pool = WINED3DPOOL_MANAGED;
/* Managed textures have the system memory flag set */
pDDSD->ddsCaps.dwCaps |= DDSCAPS_SYSTEMMEMORY;
}
else if(pDDSD->ddsCaps.dwCaps & DDSCAPS_VIDEOMEMORY)
{
/* Videomemory adds localvidmem, this is mutually exclusive with systemmemory
* and texturemanage
*/
pDDSD->ddsCaps.dwCaps |= DDSCAPS_LOCALVIDMEM;
}
Format = PixelFormat_DD2WineD3D(&pDDSD->u4.ddpfPixelFormat);
if(Format == WINED3DFMT_UNKNOWN)
{
ERR("Unsupported / Unknown pixelformat\n");
return DDERR_INVALIDPIXELFORMAT;
}
/* Create the Surface object */
*ppSurf = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IDirectDrawSurfaceImpl));
if(!*ppSurf)
{
ERR("(%p) Error allocating memory for a surface\n", This);
return DDERR_OUTOFVIDEOMEMORY;
}
(*ppSurf)->lpVtbl = &IDirectDrawSurface7_Vtbl;
(*ppSurf)->IDirectDrawSurface3_vtbl = &IDirectDrawSurface3_Vtbl;
(*ppSurf)->IDirectDrawGammaControl_vtbl = &IDirectDrawGammaControl_Vtbl;
(*ppSurf)->IDirect3DTexture2_vtbl = &IDirect3DTexture2_Vtbl;
(*ppSurf)->IDirect3DTexture_vtbl = &IDirect3DTexture1_Vtbl;
(*ppSurf)->ref = 1;
(*ppSurf)->version = 7;
TRACE("%p->version = %d\n", (*ppSurf), (*ppSurf)->version);
(*ppSurf)->ddraw = This;
(*ppSurf)->surface_desc.dwSize = sizeof(DDSURFACEDESC2);
(*ppSurf)->surface_desc.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT);
DD_STRUCT_COPY_BYSIZE(&(*ppSurf)->surface_desc, pDDSD);
/* Surface attachments */
(*ppSurf)->next_attached = NULL;
(*ppSurf)->first_attached = *ppSurf;
/* Needed to re-create the surface on an implementation change */
(*ppSurf)->ImplType = ImplType;
/* For D3DDevice creation */
(*ppSurf)->isRenderTarget = FALSE;
/* A trace message for debugging */
TRACE("(%p) Created IDirectDrawSurface implementation structure at %p\n", This, *ppSurf);
if(pDDSD->ddsCaps.dwCaps & ( DDSCAPS_PRIMARYSURFACE | DDSCAPS_TEXTURE | DDSCAPS_3DDEVICE) )
{
/* Render targets and textures need a IParent interface,
* because WineD3D will destroy them when the swapchain
* is released
*/
parImpl = HeapAlloc(GetProcessHeap(), 0, sizeof(IParentImpl));
if(!parImpl)
{
ERR("Out of memory when allocating memory for a IParent implementation\n");
return DDERR_OUTOFMEMORY;
}
parImpl->ref = 1;
parImpl->lpVtbl = &IParent_Vtbl;
Parent = (IUnknown *)parImpl;
TRACE("Using IParent interface %p as parent\n", parImpl);
}
else
{
/* Use the surface as parent */
Parent = (IUnknown *)*ppSurf;
TRACE("Using Surface interface %p as parent\n", *ppSurf);
}
/* Now create the WineD3D Surface */
hr = IWineD3DDevice_CreateSurface(This->wineD3DDevice,
pDDSD->dwWidth,
pDDSD->dwHeight,
Format,
TRUE /* Lockable */,
FALSE /* Discard */,
level,
&(*ppSurf)->WineD3DSurface,
ResType, Usage,
Pool,
WINED3DMULTISAMPLE_NONE,
0 /* MultiSampleQuality */,
0 /* SharedHandle */,
ImplType,
Parent);
if(hr != D3D_OK)
{
ERR("IWineD3DDevice::CreateSurface failed. hr = %08x\n", hr);
return hr;
}
/* Set the child of the parent implementation if it exists */
if(parImpl)
{
parImpl->child = (IUnknown *) (*ppSurf)->WineD3DSurface;
/* The IParent releases the WineD3DSurface, and
* the ddraw surface does that too. Hold a reference
*/
IWineD3DSurface_AddRef((*ppSurf)->WineD3DSurface);
}
/* Increase the surface counter, and attach the surface */
InterlockedIncrement(&This->surfaces);
list_add_head(&This->surface_list, &(*ppSurf)->surface_list_entry);
/* Here we could store all created surfaces in the DirectDrawImpl structure,
* But this could also be delegated to WineDDraw, as it keeps track of all its
* resources. Not implemented for now, as there are more important things ;)
*/
/* Get the pixel format of the WineD3DSurface and store it.
* Don't use the Format choosen above, WineD3D might have
* changed it
*/
Desc.Format = &Format;
Desc.Type = &ResType;
Desc.Usage = &Usage;
Desc.Pool = &dummy_d3dpool;
Desc.Size = &dummy_uint;
Desc.MultiSampleType = &dummy_mst;
Desc.MultiSampleQuality = &dummy_dword;
Desc.Width = &Width;
Desc.Height = &Height;
(*ppSurf)->surface_desc.dwFlags |= DDSD_PIXELFORMAT;
hr = IWineD3DSurface_GetDesc((*ppSurf)->WineD3DSurface, &Desc);
if(hr != D3D_OK)
{
ERR("IWineD3DSurface::GetDesc failed\n");
IDirectDrawSurface7_Release( (IDirectDrawSurface7 *) *ppSurf);
return hr;
}
if(Format == WINED3DFMT_UNKNOWN)
{
FIXME("IWineD3DSurface::GetDesc returned WINED3DFMT_UNKNOWN\n");
}
PixelFormat_WineD3DtoDD( &(*ppSurf)->surface_desc.u4.ddpfPixelFormat, Format);
/* Anno 1602 stores the pitch right after surface creation, so make sure it's there.
* I can't LockRect() the surface here because if OpenGL surfaces are in use, the
* WineD3DDevice might not be usable for 3D yet, so an extra method was created.
* TODO: Test other fourcc formats
*/
if(Format == WINED3DFMT_DXT1 || Format == WINED3DFMT_DXT2 || Format == WINED3DFMT_DXT3 ||
Format == WINED3DFMT_DXT4 || Format == WINED3DFMT_DXT5)
{
(*ppSurf)->surface_desc.dwFlags |= DDSD_LINEARSIZE;
if(Format == WINED3DFMT_DXT1)
{
(*ppSurf)->surface_desc.u1.dwLinearSize = max(4, Width) * max(4, Height) / 2;
}
else
{
(*ppSurf)->surface_desc.u1.dwLinearSize = max(4, Width) * max(4, Height);
}
}
else
{
(*ppSurf)->surface_desc.dwFlags |= DDSD_PITCH;
(*ppSurf)->surface_desc.u1.lPitch = IWineD3DSurface_GetPitch((*ppSurf)->WineD3DSurface);
}
/* Application passed a color key? Set it! */
if(pDDSD->dwFlags & DDSD_CKDESTOVERLAY)
{
IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface,
DDCKEY_DESTOVERLAY,
(WINEDDCOLORKEY *) &pDDSD->u3.ddckCKDestOverlay);
}
if(pDDSD->dwFlags & DDSD_CKDESTBLT)
{
IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface,
DDCKEY_DESTBLT,
(WINEDDCOLORKEY *) &pDDSD->ddckCKDestBlt);
}
if(pDDSD->dwFlags & DDSD_CKSRCOVERLAY)
{
IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface,
DDCKEY_SRCOVERLAY,
(WINEDDCOLORKEY *) &pDDSD->ddckCKSrcOverlay);
}
if(pDDSD->dwFlags & DDSD_CKSRCBLT)
{
IWineD3DSurface_SetColorKey((*ppSurf)->WineD3DSurface,
DDCKEY_SRCBLT,
(WINEDDCOLORKEY *) &pDDSD->ddckCKSrcBlt);
}
if ( pDDSD->dwFlags & DDSD_LPSURFACE)
{
hr = IWineD3DSurface_SetMem((*ppSurf)->WineD3DSurface, pDDSD->lpSurface);
if(hr != WINED3D_OK)
{
/* No need for a trace here, wined3d does that for us */
IDirectDrawSurface7_Release((IDirectDrawSurface7 *)*ppSurf);
return hr;
}
}
return DD_OK;
}
/*****************************************************************************
* CreateAdditionalSurfaces
*
* Creates a new mipmap chain.
*
* Params:
* root: Root surface to attach the newly created chain to
* count: number of surfaces to create
* DDSD: Description of the surface. Intentionally not a pointer to avoid side
* effects on the caller
* CubeFaceRoot: Whether the new surface is a root of a cube map face. This
* creates an additional surface without the mipmapping flags
*
*****************************************************************************/
static HRESULT
CreateAdditionalSurfaces(IDirectDrawImpl *This,
IDirectDrawSurfaceImpl *root,
UINT count,
DDSURFACEDESC2 DDSD,
BOOL CubeFaceRoot)
{
UINT i, j, level = 0;
HRESULT hr;
IDirectDrawSurfaceImpl *last = root;
for(i = 0; i < count; i++)
{
IDirectDrawSurfaceImpl *object2 = NULL;
/* increase the mipmap level, but only if a mipmap is created
* In this case, also halve the size
*/
if(DDSD.ddsCaps.dwCaps & DDSCAPS_MIPMAP && !CubeFaceRoot)
{
level++;
if(DDSD.dwWidth > 1) DDSD.dwWidth /= 2;
if(DDSD.dwHeight > 1) DDSD.dwHeight /= 2;
/* Set the mipmap sublevel flag according to msdn */
DDSD.ddsCaps.dwCaps2 |= DDSCAPS2_MIPMAPSUBLEVEL;
}
else
{
DDSD.ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL;
}
CubeFaceRoot = FALSE;
hr = IDirectDrawImpl_CreateNewSurface(This,
&DDSD,
&object2,
level);
if(hr != DD_OK)
{
return hr;
}
/* Add the new surface to the complex attachment array */
for(j = 0; j < MAX_COMPLEX_ATTACHED; j++)
{
if(last->complex_array[j]) continue;
last->complex_array[j] = object2;
break;
}
last = object2;
/* Remove the (possible) back buffer cap from the new surface description,
* because only one surface in the flipping chain is a back buffer, one
* is a front buffer, the others are just primary surfaces.
*/
DDSD.ddsCaps.dwCaps &= ~DDSCAPS_BACKBUFFER;
}
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::CreateSurface
*
* Creates a new IDirectDrawSurface object and returns its interface.
*
* The surface connections with wined3d are a bit tricky. Basically it works
* like this:
*
* |------------------------| |-----------------|
* | DDraw surface | | WineD3DSurface |
* | | | |
* | WineD3DSurface |-------------->| |
* | Child |<------------->| Parent |
* |------------------------| |-----------------|
*
* The DDraw surface is the parent of the wined3d surface, and it releases
* the WineD3DSurface when the ddraw surface is destroyed.
*
* However, for all surfaces which can be in a container in WineD3D,
* we have to do this. These surfaces are usually complex surfaces,
* so this concerns primary surfaces with a front and a back buffer,
* and textures.
*
* |------------------------| |-----------------|
* | DDraw surface | | Container |
* | | | |
* | Child |<------------->| Parent |
* | Texture |<------------->| |
* | WineD3DSurface |<----| | Levels |<--|
* | Complex connection | | | | |
* |------------------------| | |-----------------| |
* ^ | |
* | | |
* | | |
* | |------------------| | |-----------------| |
* | | IParent | |-------->| WineD3DSurface | |
* | | | | | |
* | | Child |<------------->| Parent | |
* | | | | Container |<--|
* | |------------------| |-----------------| |
* | |
* | |----------------------| |
* | | DDraw surface 2 | |
* | | | |
* |<->| Complex root Child | |
* | | Texture | |
* | | WineD3DSurface |<----| |
* | |----------------------| | |
* | | |
* | |---------------------| | |-----------------| |
* | | IParent | |----->| WineD3DSurface | |
* | | | | | |
* | | Child |<---------->| Parent | |
* | |---------------------| | Container |<--|
* | |-----------------| |
* | |
* | ---More surfaces can follow--- |
*
* The reason is that the IWineD3DSwapchain(render target container)
* and the IWineD3DTexure(Texture container) release the parents
* of their surface's children, but by releasing the complex root
* the surfaces which are complexly attached to it are destroyed
* too. See IDirectDrawSurface::Release for a more detailed
* explanation.
*
* Params:
* DDSD: Description of the surface to create
* Surf: Address to store the interface pointer at
* UnkOuter: Basically for aggregation support, but ddraw doesn't support
* aggregation, so it has to be NULL
*
* Returns:
* DD_OK on success
* CLASS_E_NOAGGREGATION if UnkOuter != NULL
* DDERR_* if an error occurs
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_CreateSurface(IDirectDraw7 *iface,
DDSURFACEDESC2 *DDSD,
IDirectDrawSurface7 **Surf,
IUnknown *UnkOuter)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
IDirectDrawSurfaceImpl *object = NULL;
HRESULT hr;
LONG extra_surfaces = 0;
DDSURFACEDESC2 desc2;
WINED3DDISPLAYMODE Mode;
const DWORD sysvidmem = DDSCAPS_VIDEOMEMORY | DDSCAPS_SYSTEMMEMORY;
TRACE("(%p)->(%p,%p,%p)\n", This, DDSD, Surf, UnkOuter);
/* Some checks before we start */
if (TRACE_ON(ddraw))
{
TRACE(" (%p) Requesting surface desc :\n", This);
DDRAW_dump_surface_desc(DDSD);
}
EnterCriticalSection(&ddraw_cs);
if (UnkOuter != NULL)
{
FIXME("(%p) : outer != NULL?\n", This);
LeaveCriticalSection(&ddraw_cs);
return CLASS_E_NOAGGREGATION; /* unchecked */
}
if (Surf == NULL)
{
FIXME("(%p) You want to get back a surface? Don't give NULL ptrs!\n", This);
LeaveCriticalSection(&ddraw_cs);
return E_POINTER; /* unchecked */
}
if (!(DDSD->dwFlags & DDSD_CAPS))
{
/* DVIDEO.DLL does forget the DDSD_CAPS flag ... *sigh* */
DDSD->dwFlags |= DDSD_CAPS;
}
if (DDSD->ddsCaps.dwCaps & DDSCAPS_ALLOCONLOAD)
{
/* If the surface is of the 'alloconload' type, ignore the LPSURFACE field */
DDSD->dwFlags &= ~DDSD_LPSURFACE;
}
if ((DDSD->dwFlags & DDSD_LPSURFACE) && (DDSD->lpSurface == NULL))
{
/* Frank Herbert's Dune specifies a null pointer for the surface, ignore the LPSURFACE field */
WARN("(%p) Null surface pointer specified, ignore it!\n", This);
DDSD->dwFlags &= ~DDSD_LPSURFACE;
}
if((DDSD->ddsCaps.dwCaps & (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE)) == (DDSCAPS_FLIP | DDSCAPS_PRIMARYSURFACE) &&
!(This->cooperative_level & DDSCL_EXCLUSIVE))
{
TRACE("(%p): Attempt to create a flipable primary surface without DDSCL_EXCLUSIVE set\n", This);
*Surf = NULL;
LeaveCriticalSection(&ddraw_cs);
return DDERR_NOEXCLUSIVEMODE;
}
if(DDSD->ddsCaps.dwCaps & (DDSCAPS_FRONTBUFFER | DDSCAPS_BACKBUFFER)) {
WARN("Application tried to create an explicit front or back buffer\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDCAPS;
}
if((DDSD->ddsCaps.dwCaps & sysvidmem) == sysvidmem)
{
/* This is a special switch in ddrawex.dll, but not allowed in ddraw.dll */
WARN("Application tries to put the surface in both system and video memory\n");
LeaveCriticalSection(&ddraw_cs);
*Surf = NULL;
return DDERR_INVALIDCAPS;
}
/* Check cube maps but only if the size includes them */
if (DDSD->dwSize >= sizeof(DDSURFACEDESC2))
{
if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES &&
!(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP))
{
WARN("Cube map faces requested without cube map flag\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDCAPS;
}
if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP &&
(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) == 0)
{
WARN("Cube map without faces requested\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Quick tests confirm those can be created, but we don't do that yet */
if(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP &&
(DDSD->ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP_ALLFACES) != DDSCAPS2_CUBEMAP_ALLFACES)
{
FIXME("Partial cube maps not supported yet\n");
}
}
/* According to the msdn this flag is ignored by CreateSurface */
if (DDSD->dwSize >= sizeof(DDSURFACEDESC2))
DDSD->ddsCaps.dwCaps2 &= ~DDSCAPS2_MIPMAPSUBLEVEL;
/* Modify some flags */
memset(&desc2, 0, sizeof(desc2));
desc2.dwSize = sizeof(desc2); /* For the struct copy */
DD_STRUCT_COPY_BYSIZE(&desc2, DDSD);
desc2.dwSize = sizeof(desc2); /* To override a possibly smaller size */
desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT); /* Just to be sure */
/* Get the video mode from WineD3D - we will need it */
hr = IWineD3DDevice_GetDisplayMode(This->wineD3DDevice,
0, /* Swapchain 0 */
&Mode);
if(FAILED(hr))
{
ERR("Failed to read display mode from wined3d\n");
switch(This->orig_bpp)
{
case 8:
Mode.Format = WINED3DFMT_P8;
break;
case 15:
Mode.Format = WINED3DFMT_X1R5G5B5;
break;
case 16:
Mode.Format = WINED3DFMT_R5G6B5;
break;
case 24:
Mode.Format = WINED3DFMT_R8G8B8;
break;
case 32:
Mode.Format = WINED3DFMT_X8R8G8B8;
break;
}
Mode.Width = This->orig_width;
Mode.Height = This->orig_height;
}
/* No pixelformat given? Use the current screen format */
if(!(desc2.dwFlags & DDSD_PIXELFORMAT))
{
desc2.dwFlags |= DDSD_PIXELFORMAT;
desc2.u4.ddpfPixelFormat.dwSize=sizeof(DDPIXELFORMAT);
/* Wait: It could be a Z buffer */
if(desc2.ddsCaps.dwCaps & DDSCAPS_ZBUFFER)
{
switch(desc2.u2.dwMipMapCount) /* Who had this glorious idea? */
{
case 15:
PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D15S1);
break;
case 16:
PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D16_UNORM);
break;
case 24:
PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D24X8);
break;
case 32:
PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, WINED3DFMT_D32);
break;
default:
ERR("Unknown Z buffer bit depth\n");
}
}
else
{
PixelFormat_WineD3DtoDD(&desc2.u4.ddpfPixelFormat, Mode.Format);
}
}
/* No Width or no Height? Use the original screen size
*/
if(!(desc2.dwFlags & DDSD_WIDTH) ||
!(desc2.dwFlags & DDSD_HEIGHT) )
{
/* Invalid for non-render targets */
if(!(desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE))
{
WARN("Creating a non-Primary surface without Width or Height info, returning DDERR_INVALIDPARAMS\n");
*Surf = NULL;
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
desc2.dwFlags |= DDSD_WIDTH | DDSD_HEIGHT;
desc2.dwWidth = Mode.Width;
desc2.dwHeight = Mode.Height;
}
/* Mipmap count fixes */
if(desc2.ddsCaps.dwCaps & DDSCAPS_MIPMAP)
{
if(desc2.ddsCaps.dwCaps & DDSCAPS_COMPLEX)
{
if(desc2.dwFlags & DDSD_MIPMAPCOUNT)
{
/* Mipmap count is given, should not be 0 */
if( desc2.u2.dwMipMapCount == 0 )
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
}
else
{
/* Undocumented feature: Create sublevels until
* either the width or the height is 1
*/
DWORD min = desc2.dwWidth < desc2.dwHeight ?
desc2.dwWidth : desc2.dwHeight;
desc2.u2.dwMipMapCount = 0;
while( min )
{
desc2.u2.dwMipMapCount += 1;
min >>= 1;
}
}
}
else
{
/* Not-complex mipmap -> Mipmapcount = 1 */
desc2.u2.dwMipMapCount = 1;
}
extra_surfaces = desc2.u2.dwMipMapCount - 1;
/* There's a mipmap count in the created surface in any case */
desc2.dwFlags |= DDSD_MIPMAPCOUNT;
}
/* If no mipmap is given, the texture has only one level */
/* The first surface is a front buffer, the back buffer is created afterwards */
if( (desc2.dwFlags & DDSD_CAPS) && (desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) )
{
desc2.ddsCaps.dwCaps |= DDSCAPS_FRONTBUFFER;
}
/* The root surface in a cube map is positive x */
if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP)
{
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX;
}
/* Create the first surface */
hr = IDirectDrawImpl_CreateNewSurface(This, &desc2, &object, 0);
if( hr != DD_OK)
{
ERR("IDirectDrawImpl_CreateNewSurface failed with %08x\n", hr);
LeaveCriticalSection(&ddraw_cs);
return hr;
}
object->is_complex_root = TRUE;
*Surf = (IDirectDrawSurface7 *)object;
/* Create Additional surfaces if necessary
* This applies to Primary surfaces which have a back buffer count
* set, but not to mipmap textures. In case of Mipmap textures,
* wineD3D takes care of the creation of additional surfaces
*/
if(DDSD->dwFlags & DDSD_BACKBUFFERCOUNT)
{
extra_surfaces = DDSD->dwBackBufferCount;
desc2.ddsCaps.dwCaps &= ~DDSCAPS_FRONTBUFFER; /* It's not a front buffer */
desc2.ddsCaps.dwCaps |= DDSCAPS_BACKBUFFER;
}
hr = DD_OK;
if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP)
{
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ;
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE);
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEZ;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ;
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE);
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEZ;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY;
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE);
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEY;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY;
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE);
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_POSITIVEY;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX;
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces + 1, desc2, TRUE);
desc2.ddsCaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_NEGATIVEX;
desc2.ddsCaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX;
}
hr |= CreateAdditionalSurfaces(This, object, extra_surfaces, desc2, FALSE);
if(hr != DD_OK)
{
/* This destroys and possibly created surfaces too */
IDirectDrawSurface_Release((IDirectDrawSurface7 *)object);
LeaveCriticalSection(&ddraw_cs);
return hr;
}
/* If the implementation is OpenGL and there's no d3ddevice, attach a d3ddevice
* But attach the d3ddevice only if the currently created surface was
* a primary surface (2D app in 3D mode) or a 3DDEVICE surface (3D app)
* The only case I can think of where this doesn't apply is when a
* 2D app was configured by the user to run with OpenGL and it didn't create
* the render target as first surface. In this case the render target creation
* will cause the 3D init.
*/
if( (This->ImplType == SURFACE_OPENGL) && !(This->d3d_initialized) &&
desc2.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_3DDEVICE) )
{
IDirectDrawSurfaceImpl *target = object, *surface;
struct list *entry;
/* Search for the primary to use as render target */
LIST_FOR_EACH(entry, &This->surface_list)
{
surface = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry);
if((surface->surface_desc.ddsCaps.dwCaps & (DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER)) ==
(DDSCAPS_PRIMARYSURFACE | DDSCAPS_FRONTBUFFER))
{
/* found */
target = surface;
TRACE("Using primary %p as render target\n", target);
break;
}
}
TRACE("(%p) Attaching a D3DDevice, rendertarget = %p\n", This, target);
hr = IDirectDrawImpl_AttachD3DDevice(This, target);
if(hr != D3D_OK)
{
IDirectDrawSurfaceImpl *release_surf;
ERR("IDirectDrawImpl_AttachD3DDevice failed, hr = %x\n", hr);
*Surf = NULL;
/* The before created surface structures are in an incomplete state here.
* WineD3D holds the reference on the IParents, and it released them on the failure
* already. So the regular release method implementation would fail on the attempt
* to destroy either the IParents or the swapchain. So free the surface here.
* The surface structure here is a list, not a tree, because onscreen targets
* cannot be cube textures
*/
while(object)
{
release_surf = object;
object = object->complex_array[0];
IDirectDrawSurfaceImpl_Destroy(release_surf);
}
LeaveCriticalSection(&ddraw_cs);
return hr;
}
} else if(!(This->d3d_initialized) && desc2.ddsCaps.dwCaps & DDSCAPS_PRIMARYSURFACE) {
IDirectDrawImpl_CreateGDISwapChain(This, object);
}
/* Addref the ddraw interface to keep an reference for each surface */
IDirectDraw7_AddRef(iface);
object->ifaceToRelease = (IUnknown *) iface;
/* Create a WineD3DTexture if a texture was requested */
if(desc2.ddsCaps.dwCaps & DDSCAPS_TEXTURE)
{
UINT levels;
WINED3DFORMAT Format;
WINED3DPOOL Pool = WINED3DPOOL_DEFAULT;
This->tex_root = object;
if(desc2.ddsCaps.dwCaps & DDSCAPS_MIPMAP)
{
/* a mipmap is created, create enough levels */
levels = desc2.u2.dwMipMapCount;
}
else
{
/* No mipmap is created, create one level */
levels = 1;
}
/* DDSCAPS_SYSTEMMEMORY textures are in WINED3DPOOL_SYSTEMMEM */
if(DDSD->ddsCaps.dwCaps & DDSCAPS_SYSTEMMEMORY)
{
Pool = WINED3DPOOL_SYSTEMMEM;
}
/* Should I forward the MANAGED cap to the managed pool ? */
/* Get the format. It's set already by CreateNewSurface */
Format = PixelFormat_DD2WineD3D(&object->surface_desc.u4.ddpfPixelFormat);
/* The surfaces are already created, the callback only
* passes the IWineD3DSurface to WineD3D
*/
if(desc2.ddsCaps.dwCaps2 & DDSCAPS2_CUBEMAP)
{
hr = IWineD3DDevice_CreateCubeTexture(This->wineD3DDevice, DDSD->dwWidth /* Edgelength */,
levels, 0 /* usage */, Format, Pool, (IWineD3DCubeTexture **)&object->wineD3DTexture,
0 /* SharedHandle */, (IUnknown *)object);
}
else
{
hr = IWineD3DDevice_CreateTexture(This->wineD3DDevice, DDSD->dwWidth, DDSD->dwHeight, levels,
0 /* usage */, Format, Pool, (IWineD3DTexture **) &object->wineD3DTexture,
0 /* SharedHandle */, (IUnknown *)object);
}
This->tex_root = NULL;
}
LeaveCriticalSection(&ddraw_cs);
return hr;
}
#define DDENUMSURFACES_SEARCHTYPE (DDENUMSURFACES_CANBECREATED|DDENUMSURFACES_DOESEXIST)
#define DDENUMSURFACES_MATCHTYPE (DDENUMSURFACES_ALL|DDENUMSURFACES_MATCH|DDENUMSURFACES_NOMATCH)
static BOOL
Main_DirectDraw_DDPIXELFORMAT_Match(const DDPIXELFORMAT *requested,
const DDPIXELFORMAT *provided)
{
/* Some flags must be present in both or neither for a match. */
static const DWORD must_match = DDPF_PALETTEINDEXED1 | DDPF_PALETTEINDEXED2
| DDPF_PALETTEINDEXED4 | DDPF_PALETTEINDEXED8 | DDPF_FOURCC
| DDPF_ZBUFFER | DDPF_STENCILBUFFER;
if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags)
return FALSE;
if ((requested->dwFlags & must_match) != (provided->dwFlags & must_match))
return FALSE;
if (requested->dwFlags & DDPF_FOURCC)
if (requested->dwFourCC != provided->dwFourCC)
return FALSE;
if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_ALPHA
|DDPF_LUMINANCE|DDPF_BUMPDUDV))
if (requested->u1.dwRGBBitCount != provided->u1.dwRGBBitCount)
return FALSE;
if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER
|DDPF_LUMINANCE|DDPF_BUMPDUDV))
if (requested->u2.dwRBitMask != provided->u2.dwRBitMask)
return FALSE;
if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_ZBUFFER|DDPF_BUMPDUDV))
if (requested->u3.dwGBitMask != provided->u3.dwGBitMask)
return FALSE;
/* I could be wrong about the bumpmapping. MSDN docs are vague. */
if (requested->dwFlags & (DDPF_RGB|DDPF_YUV|DDPF_STENCILBUFFER
|DDPF_BUMPDUDV))
if (requested->u4.dwBBitMask != provided->u4.dwBBitMask)
return FALSE;
if (requested->dwFlags & (DDPF_ALPHAPIXELS|DDPF_ZPIXELS))
if (requested->u5.dwRGBAlphaBitMask != provided->u5.dwRGBAlphaBitMask)
return FALSE;
return TRUE;
}
static BOOL
IDirectDrawImpl_DDSD_Match(const DDSURFACEDESC2* requested,
const DDSURFACEDESC2* provided)
{
struct compare_info
{
DWORD flag;
ptrdiff_t offset;
size_t size;
};
#define CMP(FLAG, FIELD) \
{ DDSD_##FLAG, offsetof(DDSURFACEDESC2, FIELD), \
sizeof(((DDSURFACEDESC2 *)(NULL))->FIELD) }
static const struct compare_info compare[] =
{
CMP(ALPHABITDEPTH, dwAlphaBitDepth),
CMP(BACKBUFFERCOUNT, dwBackBufferCount),
CMP(CAPS, ddsCaps),
CMP(CKDESTBLT, ddckCKDestBlt),
CMP(CKDESTOVERLAY, u3 /* ddckCKDestOverlay */),
CMP(CKSRCBLT, ddckCKSrcBlt),
CMP(CKSRCOVERLAY, ddckCKSrcOverlay),
CMP(HEIGHT, dwHeight),
CMP(LINEARSIZE, u1 /* dwLinearSize */),
CMP(LPSURFACE, lpSurface),
CMP(MIPMAPCOUNT, u2 /* dwMipMapCount */),
CMP(PITCH, u1 /* lPitch */),
/* PIXELFORMAT: manual */
CMP(REFRESHRATE, u2 /* dwRefreshRate */),
CMP(TEXTURESTAGE, dwTextureStage),
CMP(WIDTH, dwWidth),
/* ZBUFFERBITDEPTH: "obsolete" */
};
#undef CMP
unsigned int i;
if ((requested->dwFlags & provided->dwFlags) != requested->dwFlags)
return FALSE;
for (i=0; i < sizeof(compare)/sizeof(compare[0]); i++)
{
if (requested->dwFlags & compare[i].flag
&& memcmp((const char *)provided + compare[i].offset,
(const char *)requested + compare[i].offset,
compare[i].size) != 0)
return FALSE;
}
if (requested->dwFlags & DDSD_PIXELFORMAT)
{
if (!Main_DirectDraw_DDPIXELFORMAT_Match(&requested->u4.ddpfPixelFormat,
&provided->u4.ddpfPixelFormat))
return FALSE;
}
return TRUE;
}
#undef DDENUMSURFACES_SEARCHTYPE
#undef DDENUMSURFACES_MATCHTYPE
/*****************************************************************************
* IDirectDraw7::EnumSurfaces
*
* Loops through all surfaces attached to this device and calls the
* application callback. This can't be relayed to WineD3DDevice,
* because some WineD3DSurfaces' parents are IParent objects
*
* Params:
* Flags: Some filtering flags. See IDirectDrawImpl_EnumSurfacesCallback
* DDSD: Description to filter for
* Context: Application-provided pointer, it's passed unmodified to the
* Callback function
* Callback: Address to call for each surface
*
* Returns:
* DDERR_INVALIDPARAMS if the callback is NULL
* DD_OK on success
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_EnumSurfaces(IDirectDraw7 *iface,
DWORD Flags,
DDSURFACEDESC2 *DDSD,
void *Context,
LPDDENUMSURFACESCALLBACK7 Callback)
{
/* The surface enumeration is handled by WineDDraw,
* because it keeps track of all surfaces attached to
* it. The filtering is done by our callback function,
* because WineDDraw doesn't handle ddraw-like surface
* caps structures
*/
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
IDirectDrawSurfaceImpl *surf;
BOOL all, nomatch;
DDSURFACEDESC2 desc;
struct list *entry, *entry2;
all = Flags & DDENUMSURFACES_ALL;
nomatch = Flags & DDENUMSURFACES_NOMATCH;
TRACE("(%p)->(%x,%p,%p,%p)\n", This, Flags, DDSD, Context, Callback);
EnterCriticalSection(&ddraw_cs);
if(!Callback)
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_INVALIDPARAMS;
}
/* Use the _SAFE enumeration, the app may destroy enumerated surfaces */
LIST_FOR_EACH_SAFE(entry, entry2, &This->surface_list)
{
surf = LIST_ENTRY(entry, IDirectDrawSurfaceImpl, surface_list_entry);
if (all || (nomatch != IDirectDrawImpl_DDSD_Match(DDSD, &surf->surface_desc)))
{
desc = surf->surface_desc;
IDirectDrawSurface7_AddRef((IDirectDrawSurface7 *)surf);
if (Callback((IDirectDrawSurface7 *)surf, &desc, Context) != DDENUMRET_OK)
{
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
}
}
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
static HRESULT WINAPI
findRenderTarget(IDirectDrawSurface7 *surface,
DDSURFACEDESC2 *desc,
void *ctx)
{
IDirectDrawSurfaceImpl *surf = (IDirectDrawSurfaceImpl *)surface;
IDirectDrawSurfaceImpl **target = ctx;
if(!surf->isRenderTarget) {
*target = surf;
IDirectDrawSurface7_Release(surface);
return DDENUMRET_CANCEL;
}
/* Recurse into the surface tree */
IDirectDrawSurface7_EnumAttachedSurfaces(surface, ctx, findRenderTarget);
IDirectDrawSurface7_Release(surface);
if(*target) return DDENUMRET_CANCEL;
else return DDENUMRET_OK; /* Continue with the next neighbor surface */
}
static HRESULT IDirectDrawImpl_CreateGDISwapChain(IDirectDrawImpl *This,
IDirectDrawSurfaceImpl *primary) {
HRESULT hr;
WINED3DPRESENT_PARAMETERS presentation_parameters;
HWND window;
window = This->dest_window;
memset(&presentation_parameters, 0, sizeof(presentation_parameters));
/* Use the surface description for the device parameters, not the
* Device settings. The app might render to an offscreen surface
*/
presentation_parameters.BackBufferWidth = primary->surface_desc.dwWidth;
presentation_parameters.BackBufferHeight = primary->surface_desc.dwHeight;
presentation_parameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat);
presentation_parameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) ? primary->surface_desc.dwBackBufferCount : 0;
presentation_parameters.MultiSampleType = WINED3DMULTISAMPLE_NONE;
presentation_parameters.MultiSampleQuality = 0;
presentation_parameters.SwapEffect = WINED3DSWAPEFFECT_FLIP;
presentation_parameters.hDeviceWindow = window;
presentation_parameters.Windowed = !(This->cooperative_level & DDSCL_FULLSCREEN);
presentation_parameters.EnableAutoDepthStencil = FALSE; /* Not on GDI swapchains */
presentation_parameters.AutoDepthStencilFormat = 0;
presentation_parameters.Flags = 0;
presentation_parameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; /* Default rate: It's already set */
presentation_parameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT;
This->d3d_target = primary;
hr = IWineD3DDevice_InitGDI(This->wineD3DDevice, &presentation_parameters);
This->d3d_target = NULL;
if (hr != D3D_OK)
{
FIXME("(%p) call to IWineD3DDevice_InitGDI failed\n", This);
primary->wineD3DSwapChain = NULL;
}
return hr;
}
/*****************************************************************************
* IDirectDrawImpl_AttachD3DDevice
*
* Initializes the D3D capabilities of WineD3D
*
* Params:
* primary: The primary surface for D3D
*
* Returns
* DD_OK on success,
* DDERR_* otherwise
*
*****************************************************************************/
static HRESULT
IDirectDrawImpl_AttachD3DDevice(IDirectDrawImpl *This,
IDirectDrawSurfaceImpl *primary)
{
HRESULT hr;
HWND window = This->dest_window;
WINED3DPRESENT_PARAMETERS localParameters;
TRACE("(%p)->(%p)\n", This, primary);
/* If there's no window, create a hidden window. WineD3D needs it */
if(window == 0 || window == GetDesktopWindow())
{
window = CreateWindowExA(0, This->classname, "Hidden D3D Window",
WS_DISABLED, 0, 0,
GetSystemMetrics(SM_CXSCREEN),
GetSystemMetrics(SM_CYSCREEN),
NULL, NULL, GetModuleHandleA(0), NULL);
ShowWindow(window, SW_HIDE); /* Just to be sure */
WARN("(%p) No window for the Direct3DDevice, created a hidden window. HWND=%p\n", This, window);
}
else
{
TRACE("(%p) Using existing window %p for Direct3D rendering\n", This, window);
}
This->d3d_window = window;
/* Store the future Render Target surface */
This->d3d_target = primary;
/* Use the surface description for the device parameters, not the
* Device settings. The app might render to an offscreen surface
*/
localParameters.BackBufferWidth = primary->surface_desc.dwWidth;
localParameters.BackBufferHeight = primary->surface_desc.dwHeight;
localParameters.BackBufferFormat = PixelFormat_DD2WineD3D(&primary->surface_desc.u4.ddpfPixelFormat);
localParameters.BackBufferCount = (primary->surface_desc.dwFlags & DDSD_BACKBUFFERCOUNT) ? primary->surface_desc.dwBackBufferCount : 0;
localParameters.MultiSampleType = WINED3DMULTISAMPLE_NONE;
localParameters.MultiSampleQuality = 0;
localParameters.SwapEffect = WINED3DSWAPEFFECT_COPY;
localParameters.hDeviceWindow = window;
localParameters.Windowed = !(This->cooperative_level & DDSCL_FULLSCREEN);
localParameters.EnableAutoDepthStencil = TRUE;
localParameters.AutoDepthStencilFormat = WINED3DFMT_D16_UNORM;
localParameters.Flags = 0;
localParameters.FullScreen_RefreshRateInHz = WINED3DPRESENT_RATE_DEFAULT; /* Default rate: It's already set */
localParameters.PresentationInterval = WINED3DPRESENT_INTERVAL_DEFAULT;
TRACE("Passing mode %d\n", localParameters.BackBufferFormat);
/* Set this NOW, otherwise creating the depth stencil surface will cause a
* recursive loop until ram or emulated video memory is full
*/
This->d3d_initialized = TRUE;
hr = IWineD3DDevice_Init3D(This->wineD3DDevice, &localParameters);
if(FAILED(hr))
{
This->d3d_target = NULL;
This->d3d_initialized = FALSE;
return hr;
}
This->declArraySize = 2;
This->decls = HeapAlloc(GetProcessHeap(),
HEAP_ZERO_MEMORY,
sizeof(*This->decls) * This->declArraySize);
if(!This->decls)
{
ERR("Error allocating an array for the converted vertex decls\n");
This->declArraySize = 0;
hr = IWineD3DDevice_Uninit3D(This->wineD3DDevice,
D3D7CB_DestroyDepthStencilSurface,
D3D7CB_DestroySwapChain);
return E_OUTOFMEMORY;
}
/* Create an Index Buffer parent */
TRACE("(%p) Successfully initialized 3D\n", This);
return DD_OK;
}
/*****************************************************************************
* DirectDrawCreateClipper (DDRAW.@)
*
* Creates a new IDirectDrawClipper object.
*
* Params:
* Clipper: Address to write the interface pointer to
* UnkOuter: For aggregation support, which ddraw doesn't have. Has to be
* NULL
*
* Returns:
* CLASS_E_NOAGGREGATION if UnkOuter != NULL
* E_OUTOFMEMORY if allocating the object failed
*
*****************************************************************************/
HRESULT WINAPI
DirectDrawCreateClipper(DWORD Flags,
LPDIRECTDRAWCLIPPER *Clipper,
IUnknown *UnkOuter)
{
IDirectDrawClipperImpl* object;
TRACE("(%08x,%p,%p)\n", Flags, Clipper, UnkOuter);
EnterCriticalSection(&ddraw_cs);
if (UnkOuter != NULL)
{
LeaveCriticalSection(&ddraw_cs);
return CLASS_E_NOAGGREGATION;
}
if (!LoadWineD3D())
{
LeaveCriticalSection(&ddraw_cs);
return DDERR_NODIRECTDRAWSUPPORT;
}
object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY,
sizeof(IDirectDrawClipperImpl));
if (object == NULL)
{
LeaveCriticalSection(&ddraw_cs);
return E_OUTOFMEMORY;
}
object->lpVtbl = &IDirectDrawClipper_Vtbl;
object->ref = 1;
object->wineD3DClipper = pWineDirect3DCreateClipper((IUnknown *) object);
if(!object->wineD3DClipper)
{
HeapFree(GetProcessHeap(), 0, object);
LeaveCriticalSection(&ddraw_cs);
return E_OUTOFMEMORY;
}
*Clipper = (IDirectDrawClipper *) object;
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::CreateClipper
*
* Creates a DDraw clipper. See DirectDrawCreateClipper for details
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_CreateClipper(IDirectDraw7 *iface,
DWORD Flags,
IDirectDrawClipper **Clipper,
IUnknown *UnkOuter)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
TRACE("(%p)->(%x,%p,%p)\n", This, Flags, Clipper, UnkOuter);
return DirectDrawCreateClipper(Flags, Clipper, UnkOuter);
}
/*****************************************************************************
* IDirectDraw7::CreatePalette
*
* Creates a new IDirectDrawPalette object
*
* Params:
* Flags: The flags for the new clipper
* ColorTable: Color table to assign to the new clipper
* Palette: Address to write the interface pointer to
* UnkOuter: For aggregation support, which ddraw doesn't have. Has to be
* NULL
*
* Returns:
* CLASS_E_NOAGGREGATION if UnkOuter != NULL
* E_OUTOFMEMORY if allocating the object failed
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_CreatePalette(IDirectDraw7 *iface,
DWORD Flags,
PALETTEENTRY *ColorTable,
IDirectDrawPalette **Palette,
IUnknown *pUnkOuter)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
IDirectDrawPaletteImpl *object;
HRESULT hr = DDERR_GENERIC;
TRACE("(%p)->(%x,%p,%p,%p)\n", This, Flags, ColorTable, Palette, pUnkOuter);
EnterCriticalSection(&ddraw_cs);
if(pUnkOuter != NULL)
{
WARN("pUnkOuter is %p, returning CLASS_E_NOAGGREGATION\n", pUnkOuter);
LeaveCriticalSection(&ddraw_cs);
return CLASS_E_NOAGGREGATION;
}
/* The refcount test shows that a cooplevel is required for this */
if(!This->cooperative_level)
{
WARN("No cooperative level set, returning DDERR_NOCOOPERATIVELEVELSET\n");
LeaveCriticalSection(&ddraw_cs);
return DDERR_NOCOOPERATIVELEVELSET;
}
object = HeapAlloc(GetProcessHeap(), 0, sizeof(IDirectDrawPaletteImpl));
if(!object)
{
ERR("Out of memory when allocating memory for a palette implementation\n");
LeaveCriticalSection(&ddraw_cs);
return E_OUTOFMEMORY;
}
object->lpVtbl = &IDirectDrawPalette_Vtbl;
object->ref = 1;
object->ddraw_owner = This;
hr = IWineD3DDevice_CreatePalette(This->wineD3DDevice, Flags,
ColorTable, &object->wineD3DPalette, (IUnknown *)object);
if(hr != DD_OK)
{
HeapFree(GetProcessHeap(), 0, object);
LeaveCriticalSection(&ddraw_cs);
return hr;
}
IDirectDraw7_AddRef(iface);
object->ifaceToRelease = (IUnknown *) iface;
*Palette = (IDirectDrawPalette *)object;
LeaveCriticalSection(&ddraw_cs);
return DD_OK;
}
/*****************************************************************************
* IDirectDraw7::DuplicateSurface
*
* Duplicates a surface. The surface memory points to the same memory as
* the original surface, and it's released when the last surface referencing
* it is released. I guess that's beyond Wine's surface management right now
* (Idea: create a new DDraw surface with the same WineD3DSurface. I need a
* test application to implement this)
*
* Params:
* Src: Address of the source surface
* Dest: Address to write the new surface pointer to
*
* Returns:
* See IDirectDraw7::CreateSurface
*
*****************************************************************************/
static HRESULT WINAPI
IDirectDrawImpl_DuplicateSurface(IDirectDraw7 *iface,
IDirectDrawSurface7 *Src,
IDirectDrawSurface7 **Dest)
{
IDirectDrawImpl *This = (IDirectDrawImpl *)iface;
IDirectDrawSurfaceImpl *Surf = (IDirectDrawSurfaceImpl *)Src;
FIXME("(%p)->(%p,%p)\n", This, Surf, Dest);
/* For now, simply create a new, independent surface */
return IDirectDraw7_CreateSurface(iface,
&Surf->surface_desc,
Dest,
NULL);
}
/*****************************************************************************
* IDirectDraw7 VTable
*****************************************************************************/
const IDirectDraw7Vtbl IDirectDraw7_Vtbl =
{
/*** IUnknown ***/
IDirectDrawImpl_QueryInterface,
IDirectDrawImpl_AddRef,
IDirectDrawImpl_Release,
/*** IDirectDraw ***/
IDirectDrawImpl_Compact,
IDirectDrawImpl_CreateClipper,
IDirectDrawImpl_CreatePalette,
IDirectDrawImpl_CreateSurface,
IDirectDrawImpl_DuplicateSurface,
IDirectDrawImpl_EnumDisplayModes,
IDirectDrawImpl_EnumSurfaces,
IDirectDrawImpl_FlipToGDISurface,
IDirectDrawImpl_GetCaps,
IDirectDrawImpl_GetDisplayMode,
IDirectDrawImpl_GetFourCCCodes,
IDirectDrawImpl_GetGDISurface,
IDirectDrawImpl_GetMonitorFrequency,
IDirectDrawImpl_GetScanLine,
IDirectDrawImpl_GetVerticalBlankStatus,
IDirectDrawImpl_Initialize,
IDirectDrawImpl_RestoreDisplayMode,
IDirectDrawImpl_SetCooperativeLevel,
IDirectDrawImpl_SetDisplayMode,
IDirectDrawImpl_WaitForVerticalBlank,
/*** IDirectDraw2 ***/
IDirectDrawImpl_GetAvailableVidMem,
/*** IDirectDraw3 ***/
IDirectDrawImpl_GetSurfaceFromDC,
/*** IDirectDraw4 ***/
IDirectDrawImpl_RestoreAllSurfaces,
IDirectDrawImpl_TestCooperativeLevel,
IDirectDrawImpl_GetDeviceIdentifier,
/*** IDirectDraw7 ***/
IDirectDrawImpl_StartModeTest,
IDirectDrawImpl_EvaluateMode
};
/*****************************************************************************
* IDirectDrawImpl_FindDecl
*
* Finds the WineD3D vertex declaration for a specific fvf, and creates one
* if none was found.
*
* This function is in ddraw.c and the DDraw object space because D3D7
* vertex buffers are created using the IDirect3D interface to the ddraw
* object, so they can be valid across D3D devices(theoretically. The ddraw
* object also owns the wined3d device
*
* Parameters:
* This: Device
* fvf: Fvf to find the decl for
*
* Returns:
* NULL in case of an error, the IWineD3DVertexDeclaration interface for the
* fvf otherwise.
*
*****************************************************************************/
IWineD3DVertexDeclaration *
IDirectDrawImpl_FindDecl(IDirectDrawImpl *This,
DWORD fvf)
{
HRESULT hr;
IWineD3DVertexDeclaration* pDecl = NULL;
int p, low, high; /* deliberately signed */
struct FvfToDecl *convertedDecls = This->decls;
TRACE("Searching for declaration for fvf %08x... ", fvf);
low = 0;
high = This->numConvertedDecls - 1;
while(low <= high) {
p = (low + high) >> 1;
TRACE("%d ", p);
if(convertedDecls[p].fvf == fvf) {
TRACE("found %p\n", convertedDecls[p].decl);
return convertedDecls[p].decl;
} else if(convertedDecls[p].fvf < fvf) {
low = p + 1;
} else {
high = p - 1;
}
}
TRACE("not found. Creating and inserting at position %d.\n", low);
hr = IWineD3DDevice_CreateVertexDeclarationFromFVF(This->wineD3DDevice, &pDecl, (IUnknown *)This, fvf);
if (hr != S_OK) return NULL;
if(This->declArraySize == This->numConvertedDecls) {
int grow = max(This->declArraySize / 2, 8);
convertedDecls = HeapReAlloc(GetProcessHeap(), 0, convertedDecls,
sizeof(convertedDecls[0]) * (This->numConvertedDecls + grow));
if(!convertedDecls) {
/* This will destroy it */
IWineD3DVertexDeclaration_Release(pDecl);
return NULL;
}
This->decls = convertedDecls;
This->declArraySize += grow;
}
memmove(convertedDecls + low + 1, convertedDecls + low, sizeof(convertedDecls[0]) * (This->numConvertedDecls - low));
convertedDecls[low].decl = pDecl;
convertedDecls[low].fvf = fvf;
This->numConvertedDecls++;
TRACE("Returning %p. %d decls in array\n", pDecl, This->numConvertedDecls);
return pDecl;
}
/* IWineD3DDeviceParent IUnknown methods */
static inline struct IDirectDrawImpl *ddraw_from_device_parent(IWineD3DDeviceParent *iface)
{
return (struct IDirectDrawImpl *)((char*)iface - FIELD_OFFSET(struct IDirectDrawImpl, device_parent_vtbl));
}
static HRESULT STDMETHODCALLTYPE device_parent_QueryInterface(IWineD3DDeviceParent *iface, REFIID riid, void **object)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
return IDirectDrawImpl_QueryInterface((IDirectDraw7 *)This, riid, object);
}
static ULONG STDMETHODCALLTYPE device_parent_AddRef(IWineD3DDeviceParent *iface)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
return IDirectDrawImpl_AddRef((IDirectDraw7 *)This);
}
static ULONG STDMETHODCALLTYPE device_parent_Release(IWineD3DDeviceParent *iface)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
return IDirectDrawImpl_Release((IDirectDraw7 *)This);
}
/* IWineD3DDeviceParent methods */
static void STDMETHODCALLTYPE device_parent_WineD3DDeviceCreated(IWineD3DDeviceParent *iface, IWineD3DDevice *device)
{
TRACE("iface %p, device %p\n", iface, device);
}
static HRESULT STDMETHODCALLTYPE device_parent_CreateSurface(IWineD3DDeviceParent *iface,
IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, DWORD usage,
WINED3DPOOL pool, UINT level, WINED3DCUBEMAP_FACES face, IWineD3DSurface **surface)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
IDirectDrawSurfaceImpl *surf = NULL;
UINT i = 0;
DDSCAPS2 searchcaps = This->tex_root->surface_desc.ddsCaps;
TRACE("iface %p, superior %p, width %u, height %u, format %#x, usage %#x,\n"
"\tpool %#x, level %u, face %u, surface %p\n",
iface, superior, width, height, format, usage, pool, level, face, surface);
searchcaps.dwCaps2 &= ~DDSCAPS2_CUBEMAP_ALLFACES;
switch(face)
{
case WINED3DCUBEMAP_FACE_POSITIVE_X:
TRACE("Asked for positive x\n");
if (searchcaps.dwCaps2 & DDSCAPS2_CUBEMAP)
{
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEX;
}
surf = This->tex_root; break;
case WINED3DCUBEMAP_FACE_NEGATIVE_X:
TRACE("Asked for negative x\n");
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEX; break;
case WINED3DCUBEMAP_FACE_POSITIVE_Y:
TRACE("Asked for positive y\n");
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEY; break;
case WINED3DCUBEMAP_FACE_NEGATIVE_Y:
TRACE("Asked for negative y\n");
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEY; break;
case WINED3DCUBEMAP_FACE_POSITIVE_Z:
TRACE("Asked for positive z\n");
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_POSITIVEZ; break;
case WINED3DCUBEMAP_FACE_NEGATIVE_Z:
TRACE("Asked for negative z\n");
searchcaps.dwCaps2 |= DDSCAPS2_CUBEMAP_NEGATIVEZ; break;
default: {ERR("Unexpected cube face\n");} /* Stupid compiler */
}
if (!surf)
{
IDirectDrawSurface7 *attached;
IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)This->tex_root, &searchcaps, &attached);
surf = (IDirectDrawSurfaceImpl *)attached;
IDirectDrawSurface7_Release(attached);
}
if (!surf) ERR("root search surface not found\n");
/* Find the wanted mipmap. There are enough mipmaps in the chain */
while (i < level)
{
IDirectDrawSurface7 *attached;
IDirectDrawSurface7_GetAttachedSurface((IDirectDrawSurface7 *)surf, &searchcaps, &attached);
if(!attached) ERR("Surface not found\n");
surf = (IDirectDrawSurfaceImpl *)attached;
IDirectDrawSurface7_Release(attached);
++i;
}
/* Return the surface */
*surface = surf->WineD3DSurface;
TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, surf);
return D3D_OK;
}
static HRESULT STDMETHODCALLTYPE device_parent_CreateRenderTarget(IWineD3DDeviceParent *iface,
IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, WINED3DMULTISAMPLE_TYPE multisample_type,
DWORD multisample_quality, BOOL lockable, IWineD3DSurface **surface)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
IDirectDrawSurfaceImpl *d3d_surface = This->d3d_target;
IDirectDrawSurfaceImpl *target = NULL;
TRACE("iface %p, superior %p, width %u, height %u, format %#x, multisample_type %#x,\n"
"\tmultisample_quality %u, lockable %u, surface %p\n",
iface, superior, width, height, format, multisample_type, multisample_quality, lockable, surface);
if (d3d_surface->isRenderTarget)
{
IDirectDrawSurface7_EnumAttachedSurfaces((IDirectDrawSurface7 *)d3d_surface, &target, findRenderTarget);
}
else
{
target = d3d_surface;
}
if (!target)
{
target = This->d3d_target;
ERR(" (%p) : No DirectDrawSurface found to create the back buffer. Using the front buffer as back buffer. Uncertain consequences\n", This);
}
/* TODO: Return failure if the dimensions do not match, but this shouldn't happen */
*surface = target->WineD3DSurface;
target->isRenderTarget = TRUE;
TRACE("Returning wineD3DSurface %p, it belongs to surface %p\n", *surface, d3d_surface);
return D3D_OK;
}
static HRESULT STDMETHODCALLTYPE device_parent_CreateDepthStencilSurface(IWineD3DDeviceParent *iface,
IUnknown *superior, UINT width, UINT height, WINED3DFORMAT format, WINED3DMULTISAMPLE_TYPE multisample_type,
DWORD multisample_quality, BOOL discard, IWineD3DSurface **surface)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
/* Create a Depth Stencil surface to make WineD3D happy */
DDSURFACEDESC2 ddsd;
HRESULT hr;
TRACE("iface %p, superior %p, width %u, height %u, format %#x, multisample_type %#x,\n"
"\tmultisample_quality %u, discard %u, surface %p\n",
iface, superior, width, height, format, multisample_type, multisample_quality, discard, surface);
*surface = NULL;
/* Create a DirectDraw surface */
memset(&ddsd, 0, sizeof(ddsd));
ddsd.dwSize = sizeof(ddsd);
ddsd.u4.ddpfPixelFormat.dwSize = sizeof(DDPIXELFORMAT);
ddsd.dwFlags = DDSD_PIXELFORMAT | DDSD_WIDTH | DDSD_HEIGHT | DDSD_CAPS;
ddsd.ddsCaps.dwCaps = DDSCAPS_OFFSCREENPLAIN;
ddsd.dwHeight = height;
ddsd.dwWidth = width;
if (format)
{
PixelFormat_WineD3DtoDD(&ddsd.u4.ddpfPixelFormat, format);
}
else
{
ddsd.dwFlags ^= DDSD_PIXELFORMAT;
}
This->depthstencil = TRUE;
hr = IDirectDraw7_CreateSurface((IDirectDraw7 *)This,
&ddsd, (IDirectDrawSurface7 **)&This->DepthStencilBuffer, NULL);
This->depthstencil = FALSE;
if(FAILED(hr))
{
ERR(" (%p) Creating a DepthStencil Surface failed, result = %x\n", This, hr);
return hr;
}
*surface = This->DepthStencilBuffer->WineD3DSurface;
return D3D_OK;
}
static HRESULT STDMETHODCALLTYPE device_parent_CreateVolume(IWineD3DDeviceParent *iface,
IUnknown *superior, UINT width, UINT height, UINT depth, WINED3DFORMAT format,
WINED3DPOOL pool, DWORD usage, IWineD3DVolume **volume)
{
TRACE("iface %p, superior %p, width %u, height %u, depth %u, format %#x, pool %#x, usage %#x, volume %p\n",
iface, superior, width, height, depth, format, pool, usage, volume);
ERR("Not implemented!\n");
return E_NOTIMPL;
}
static HRESULT STDMETHODCALLTYPE device_parent_CreateSwapChain(IWineD3DDeviceParent *iface,
WINED3DPRESENT_PARAMETERS *present_parameters, IWineD3DSwapChain **swapchain)
{
struct IDirectDrawImpl *This = ddraw_from_device_parent(iface);
IDirectDrawSurfaceImpl *iterator;
IParentImpl *object;
HRESULT hr;
TRACE("iface %p, present_parameters %p, swapchain %p\n", iface, present_parameters, swapchain);
object = HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, sizeof(IParentImpl));
if (!object)
{
FIXME("Allocation of memory failed\n");
*swapchain = NULL;
return DDERR_OUTOFVIDEOMEMORY;
}
object->lpVtbl = &IParent_Vtbl;
object->ref = 1;
hr = IWineD3DDevice_CreateSwapChain(This->wineD3DDevice, present_parameters,
swapchain, (IUnknown *)object, This->ImplType);
if (FAILED(hr))
{
FIXME("(%p) CreateSwapChain failed, returning %#x\n", iface, hr);
HeapFree(GetProcessHeap(), 0 , object);
*swapchain = NULL;
return hr;
}
object->child = (IUnknown *)*swapchain;
This->d3d_target->wineD3DSwapChain = *swapchain;
iterator = This->d3d_target->complex_array[0];
while (iterator)
{
iterator->wineD3DSwapChain = *swapchain;
iterator = iterator->complex_array[0];
}
return hr;
}
const IWineD3DDeviceParentVtbl ddraw_wined3d_device_parent_vtbl =
{
/* IUnknown methods */
device_parent_QueryInterface,
device_parent_AddRef,
device_parent_Release,
/* IWineD3DDeviceParent methods */
device_parent_WineD3DDeviceCreated,
device_parent_CreateSurface,
device_parent_CreateRenderTarget,
device_parent_CreateDepthStencilSurface,
device_parent_CreateVolume,
device_parent_CreateSwapChain,
};
Reference in New Issue View Git Blame Copy Permalink