SDL 1.2 had an issue using SDL_Delay() on Mac where it caused bad stuttering
and freezes. A hack was added to avoid this, but it causes 100% CPU usage when
it should be a sleep state, so it wasn't ideal.
With SDL 2 this issue was resolved with the underlying code being unified for
all *NIX variants and that problematic Mac-specific code was removed. So now
we can remove the hack to offer a little better performance on Macs.
Update haptic code with changes from icculus.org tree which optimizes
effect loading to better support low-memory devices and no longer
requires full support of every haptic effect type. Additionally...
- avoids attempting FF init for non-haptic devices
- avoids attempting FF init for gamepads
- properly resets FF when device is hot-plugged
- better start/stop/update of effects
- avoid stopping effects unless really needed
- use timestamp for dir effect restarts instead of sys calls
- avoid playing FF effects when window is in background
- general code cleanup
As discovered by WouterSmits, campaigns with periods in their filenames caused issues with FSO's campaign handling. Specifically, in The Babylon Project, the EA-Minbari war v1.0.fc2 campaign would not save progress because FSO expected EA-Minbari war v1.fc2 in certain places. This is because the `_splitpath()` function attempted to remove an extension from a filename that already had it removed. For most campaigns this did not matter, but WouterSmits found a campaign where it did.
To solve this, there is now a new `util::get_file_part()` function to remove the path without removing the extension. This replaces `_splitpath()` for campaign files, as well as the similar `clean_filename()` and `GetFilePart()` functions in other places. All code paths were inspected for any chance of inadvertent extension adding, and Assertions were added to verify future code. The only potential problem area was `player:loadCampaignSavefile()` which now pre-removes the campaign extension if needed.
```
code/menuui/barracks.cpp:188:8: error: type ‘struct barracks_buttons’ violates the C++ One Definition Rule [-Werror=odr]
188 | struct barracks_buttons {
| ^
code/menuui/playermenu.cpp:82:8: note: a different type is defined in another translation unit
82 | struct barracks_buttons {
| ^
code/osapi/osregistry.cpp:478: error: type ‘struct Section’ violates the C++ One Definition Rule [-Werror=odr]
478 | typedef struct Section
code/pilotfile/FileHandler.h:18: note: a different type is defined in another translation unit
18 | enum class Section {
```
The return value of `lua_tostring()` is NULL if (and only if) the string conversion failed. Many places in the code did not check for this situation, which led to the crash in #6290.
Fixes#6290.
* Save/Load player options to a mod-specific ini file if possible
* use rfind instead of find to ensure it's the last dash character used for trimming
* cleanup + comments + nullptr
* A more robust way of getting the mod root using lambdas
* prevent infinite loop for non Knossos/Knet mods
* Notify the player if options may need updating and pull settings from fs2_open.ini if we can
* proper localization
* update xstr
* Create the ingame options game state
* Base working version of in-game options
* Cleanup + Optimization
* Localization pass
* more cleanup + documentation
* tooltips on option hover
* documentation and better inbounds check
* match case
* format strings instead of direct strings
* unused parameter
* address feedback
* localization id conflict with master
* Add this line back in
* pass the new option flags as well
* resolve xstr id conflict
These variables are only ever used in the scope of `os_get_legacy_user_dir()`, so they can be scoped rather than global. This should fix a Coverity issue on the `DCF(low_mem` debug console function.
* Add imgui
* migrate render options
* remove wmcgui
* Add subsystem selection and highlighting
* Add a syntactic sugar extension for imgui
* don't rebuild the mission list every frame
* Add imgui_sugar extension
* Move helper functions out of lab_ui, add function to display consolidated table text for object
* add button to export cubemap
* fix entering and exiting the lab
* refactor some of this for greater cleanness
* use techroom lighting when no mission background is set
* minor things
* add imguizmo
* add imguizmo
* Add imgui
* migrate render options
* remove wmcgui
* Add subsystem selection and highlighting
* Add a syntactic sugar extension for imgui
* don't rebuild the mission list every frame
* Move helper functions out of lab_ui, add function to display consolidated table text for object
* add button to export cubemap
* fix entering and exiting the lab
* refactor some of this for greater cleanness
* minor things
* add imguizmo
* add imguizmo
* Add button to reset changes made in the render dialog
* refactoring
* unfuck rebase
* fix issue with loose mission files
* use with_CollapsingHeader for greater uniformity
* add weapon selection functionality
* make primaries and secondaries fire again
* implement animation triggers
* avoid crash when switching back and forth between ships with and without team colors
* add control to set team color setting to renderer texture dialog
* make sure the table text updates when the ship class changes
* let rotating subsystems rotate
* do not add imgui.h to pstypes
* code cleanup
* add subsys highlighter from fred
* Highlight non-modelled subsystems as well
* add cmdline flag to show the imgui demo dialogue
* fix compiler warnings reported by CI
* fix error when building the subsystem list
* refactor variable/method naming
* code cleanup
* remove vestigial code
* update to imgui 1.89.1
* add credits entry for imgui
* use the imgui namespace
* Separate the background dialog out into its own window
* make sure the subsystem highlights are placed correctly
Co-authored-by: Fabian Woltermann <[email protected]>
* Adds new default 'lua' filter category for all lua errors and output
Adds -luadev flag that currently only makes lua errors non-fatal.
* Correcting unreachable code.
* Missed a halting code path for luadevmode
* comment fix
`os_ignore_events()` deferred events instead of ignoring them. The
player could accidentally skip a cutscene at the loading screen and
not see any indication there was a cutscene.
This only removes deferred skip-cutscene key events, except ESC, right
before the cutscene plays. This makes it less likely for a player to
accidentally skip the cutscene.
This also renames `buffered_events` to `deferred_events` and
`os_ignore_events()` to `os_defer_events_on_load_screen()`, which more
accurately describes the behavior.
Fixes#4419.
os_ignore_events() was buffering events instead of ignoring them. This
caused any skip-cutscene key to be buffered during the loading screen,
which would later be handled during the cutscene. From the player's
perspective, there was no cutscene.
This changes os_ignore_events() to ignore events.
Fixes#4419.
* Updates the AxisInverted hooks to use the new CC_bind. Currently assumes only Joy0, so this may need further tweaking or replacement
* * Add ability to claim up to 4 joysticks for player use, using the launcher (via registry or fs2_open.ini) or the new menu system
* Hack into existing control polling system to get the new primary/secondary binding schema to work. This should be reworked into a reverse-lookup system.
* Finally break the mouse loose from overlapping with Joystick binidngs
* Fix bug where joy button wouldn't register on search function
* Fix bug with mousewheel not always decaying as it should.
* Fix rebase conflict with selecting item during search mode
* Fix bug where mouse buttons were incorrectly labeled.
* Move some enums around
* Fix bug with joy axis labels being displayed as buttons.
* Fix possible bug where Other conflict axis wouldn't clear
* Updated default joystick axis text. A new strings.tbl will need to be supplied for localization support
* Deprecate nAxisInverted ADE functions and replace with AxisInverted(int, int, bool)
* Merge Axis mappings into Control_config
* More utility functions for CC_bind and CCB
* Adds another ADE function for inverting the axis action, instead of individual bindings
* Hacks to get plr file to compile. Currently slices out many of the new features like secondary axis and the mouse axis, and the additional joystick bindings (joy1, joy2, joy3)
* Fix bug with uncontrollable spin (slopily)
* Fix some warnings
* Add flags for Hats and Balls for future implementation
* Fix bug where inverting an axis would trigger an assert
* Fix bug where joy wasn't detected as present
* Most axis actions should be relative, instead of absolute
* Hopefully optimize joy_get_unscaled_reading
* Properly break out of double-for search function for search and bind modes in config menu
* Refactor control_get_axes_readings to provide more consistent behavior
* Use JOY_REL_THROTTLE instead of Action::REL_THROTTLE when indexing into Control_config
* Bank axis has a default binding, Throttle does not.
* Fix bug where conflicts weren't being detected.
Fix bug where default presets weren't being detectd
* Elegantly break out of double fors with goto.
Fix bug with bind mode not detecting axis
* Save new binding scheme to playerfile
* Add cid_assign() to standardize cid assignment with shorts
* Add write and read handlers for int8_t
* Remove saving controls to csg. This will be replaced by presets.
* Fix bug with reading pilotfile
* Use "Joy-n" instead of "joystick n" to match default identifiers in config menu
* Fix bug with CC_TYPE_TRIGGER controls always marked as used, if not bound with a key.
Fix bug with Joy-0 btn 1 triggering multiple controls that are not bound to it.
* Improve readibility of the joy info output to log
* Message when a joystick connects and using legacy system.
* Fix bug where system joystick 0 was mapped in pJoystick that should've been nullptr
* Fix bug where *not* having a joystick will cause bind mode in the config menu to immediately cancel.
* Add reverse lookup functions for actions. mActionToVal[] does string -> int, mValToAction() does int -> string
* Add the foundation for writing the presets files.
* Adds a bunch of reverse lookup functions to get the stringified version of various enums, etc.
* presets.h and presets.cpp are in something of a barebones at this point
* Add new subdir for preset files 'player/presets'
* add utility for finding the distance of a bitfield/bitmask. Used to translate mouse button masks into mouse button id's
* Write PresetFileHandler as standalone, instead of a subclass. Still mostly a copy of JSONFileHandler
* Make functions to map and reverse-map the bindings for use with the preset files and ultimately the ControlConfigDefaults.tbl as well
* Check presets from file to see if they are duplicate with an existing preset.
* Check for uniqueness of presets fron controlconfigdefaults.tbl before adding them, and warn the user if there are duplicates.
* Rename the test functions into proper load/save.
* save function has some standard checks
* load function is called on init
* make finding duplicates its own function outside of the preset label rendering function
* Initial draft of saving presets in-game
* Fix bug where all loaded presets were thought to be duplicate of defaults.
* Fix bug where preset cycling would get stuck on the first preset other than default
* Fix bug where saving a mouse button saves the wrong textified string.
* Prevent preset names from being too long.
* Crash still occurs if the name is too long, as if set outside of FSO
* Workaround text running off the popups in 640x480. Doesn't look as nice, sadly
* CSG's now track preset names instead of containing bindings
* remake control_config_reset_defaults() into control_config_use_preset()
* provide a function to get the currently selected preset.
* Do PLR backward compatibility, hopefully.
* PLR now tracks presets instead of saving the bindings.
* On Loading pre PLR3 or CSG6 data, create a new preset.
* Strip off file extension before saving preset files. Jason.json.json just looks dumb
* Add "-joy_info" commandline option. Will output SDL joystick info of all detected joysticks to stdout
* Fix non-standard behavior with registry_read_string().
* Returning NULL instead of the default value, or an empty string, will trigger an access violation with SCP_string and other string copy functions.
* Modify io::joystick::init() to take an optional param, no_register, to use with -joy_info
* Address CI complaints
* Address CI issues 2.
* Supress preset duplicate warning if in unit tests.
* Address scripting unittest failure due to incorrect argument type. (Ints don't technically exist in LUA)
* Use Mouse enums instead of Joy enums or magic numbers
* More signed/unsigned madness
* Address CI issues 3
* Address gcc-5 issues. (No auto in lambdas)
* Fix bug with bit_distance()
* Address gcc-5 issues 2
* Address clang issues
* Address clang-tidy issues
* Address clang-tidy issues in undosys. May need to be cherry picked to Controls2.
* Address clang-tidy issues
* Improve logic of preset name prompt.
* Fix bug with selected presets not being saved
* No, a cstr is not a std::string.
* Can't use i there because its already defined.
* Fix bug where CSG's wouldn't save selected preset
* Fix bug where presets wouldn't be loaded correctly from player files
* Fix bug where loaded preset files would not update the preset cycle position correctly
* Some QoL changes for the preset name prompt
* Address Appveyor issues.
* Add forward compatibility for player file. This is required because currently any "missing" data in the pilotfile will trigger an Error, and crash FSO.
* Fix bug where mouse X axis was unusable.
Apparently stating that MOUSE_Z_AXIS IS MOUSE_Z_AXIS doesn't get the point across.
* Address CI issues.
* Address CI issues.
* sel default assigned to -1
* static_cast enum to an int
* Assimilate -joy_info int -get_flags, replacing the existing method that launchers use to get joystick information.
* Add '\n' to PST log messages.
* Change logic of checking joystick .ini keys: Should the multi-joy key not be found, try legacy joy key.
* Add some more missing '\n' to mprintf messages.
* Notify the player when converting to the new multi-joy system. (Using ReleaseWarning for now...)
* Warn the player if a preset defined in their .PLR could not be found.
* Actually disable control items without a valid tab, instead of relying on the fact that they're disabled by default.
* Add CC_preset::is_duplicate_of() method to make checking for preset uniqueness less of a brain teaser.
* Doxy the first_override param of control_config_common_read_section
* Adds the os::dialogs::Information() method, which displays an information-only dialog in similar format to Warning and Error dialogs. Does not throw Warning nor Error exceptions
* load_player now uses os::dialogs::Information() instead of ::ReleaseWarning, thus not halting unit tests.
* Breaks retail localization support for Joystick and Mice labels - This is because the new multi-joy axis end up very confusing "Joy-0 Joystick/Mouse X Axis"
* Renames Joy_axis_text to Axis_text, intended to be used both by joysticks and the mouse.
* Moves mouse axis and button labels into an array to ease future XSTR support
* Adds asserts to ensure indices are within the array sizes of label arrays
* Adds XSTR indices for Axis labels, mouse buttons, and mouse wheels.
* Seperates conflict check comparisons from equality comparisons.
* Conflict checks can ignore certain combinations of CC_bind::flag's; i.e. an Axis bound to a different control but is inverted or relative will still cause a conflict with another control that has the same axis
* Equality comparisons is exact equality, allowing presets to check if binds have the same binding and flag configurations.
* More UI string changes and localization
* Tweaks positioning of top button labels in CC menu
* Adds the following XSTR's:
1659 "Preset: %s"
1660 "Preset: custom"
1661 "Next Preset"
* Fix bug where mouse axis turned into mouse button when inverting control by its control name.
* Fix bug with the new conflict checking subroutine not working with non-axis controls
* Address CI issues.
* Don't trigger modal popups while in unit tests.
* Address clang tidy issues
* use nullptr
* be consistent with conditional style
* use booleans to stuff debug states, methods with just Assertions in it will trigger a false positive on clang tidy
* use string::empty() instead of checking for "".
* Remove dead code of -joy_info. Functionality has been merged with -get_flags
* Address clang-tidy [readability-simplify-boolean-expr]
--z64 says "I don't like it!"
* fix axis check
* Implement revised axis action virtvars for scripting. Also protect against a control mismatch in the CSG file due to a script-inverted control
* Encapsulate CC_bind properly
* Add mouse and joystick cid's to AxisInverted description
* Update translate_key() and its user to correctly translate multijoy bindings for training messages.
* Prompt user trying to escape from config menu when they have changes.
* Remove dead function.
* Fix crash during training missions due to key translation that would overflow internal buffer.
* Went back with cstring as return value instead of SCP string, because caller would need a significant refactor
* Update doxy of the textify functions
* Unify textify_scancode() and textify_scancode_universal() to ensure common code path.
* Add "Multijoy" entry to json caps. (For Knossos)
* Make CI happy.
* Remove unused lambda captures.
* Instead of overwrite during plr2 => plr3 conversion, try to use the existing preset file.
* Fix conditional for checking if file exists within presets::save_preset_file()
* Revert Majority of PR#3739
* PLR and CSG versions are incremented past versions set by 3739
* Forward compatibility feature of #3739 (Only save sexp containers into the CSG if they are used) is removed
* Remove forward compatibilty of PLR file when going in between pre- and post-Controls5 FSO versions
* Add missing startSection() and endSection() for csg_write_controls()
* Fix clang-tidy error #1
* Fix clang-tidy error #2
* fix clandy tidy error #1 part 2/2
* Fix clang tidy error 3
Co-authored-by: Goober5000 <[email protected]>
Co-authored-by: Tyler Blount <[email protected]>
Co-authored-by: wookieejedi <[email protected]>
Co-authored-by: BMagnu <[email protected]>
If SDL completely fails to get its preference path, at least warn the user so that it doesn't crash straight to the desktop without creating a debug build.
Goober5000