torproject/torspec
1
0
Fork 0
mirror of https://github.com/torproject/torspec.git synced 2024-11-23 09:49:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

prop329: Remove a whole lot of white spaces

Browse Source 
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit is contained in:
David Goulet 2022-11-28 09:19:46 -05:00
parent 5642732fc0
commit 1db24dddbf
1 changed files with 134 additions and 134 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

268
proposals/329-traffic-splitting.txt
View File

@ -19,11 +19,11 @@ Status: Draft
In order to understand our improvements to Conflux, it is important to
properly conceptualize what is involved in the design of multipath
algorithms in general.
The design space is broken into two orthogonal parts: congestion control
algorithms that apply to each path, and traffic scheduling algorithms
that decide which packets to send on each path.
MPTCP specifies 'coupled' congestion control (see [COUPLED]). Coupled
congestion control updates single-path congestion control algorithms to
account for shared bottlenecks between the paths, so that the combined
@ -31,14 +31,14 @@ Status: Draft
happen to be shared between the multiple paths. Various ways of
accomplishing this have been proposed and implemented in the Linux
kernel.
Because Tor's congestion control only concerns itself with bottlenecks in
Tor relay queues, and not with any other bottlenecks (such as
intermediate Internet routers), we can avoid this complexity merely by
specifying that any paths that are constructed SHOULD NOT share any
relays. In this way, we can proceed to use the exact same congestion
control as specified in Proposal 324, for each path.
For this reason, this proposal will focus on the traffic scheduling
algorithms, rather than coupling. We propose three candidate algorithms
that have been studied in the literature, and will compare their
@ -55,7 +55,7 @@ Status: Draft
(which will be available to us via Proposal 324). Additionally, since
the publication of [CONFLUX], more modern packet scheduling algorithms
have been developed, which aim to reduce out-of-order queue size.
We propose mitigations for these issues using modern scheduling
algorithms, as well as implementations options for avoiding the
out-of-order queue at Exit relays. Additionally, we consider resumption,
@ -67,9 +67,9 @@ Status: Draft
The following section describes the Conflux design. Each sub-section is
a building block to the multipath design that Conflux proposes.
The circuit construction is as follow:
Primary Circuit (lower RTT)
+-------+ +--------+
|Guard 1|----->|Middle 1|----------+
@ -81,7 +81,7 @@ Status: Draft
|Guard 2|----->|Middle 2|----------+
+-------+ +--------+
Secondary Circuit (higher RTT)
Both circuits are built using current Tor path selection, however they
SHOULD NOT share the same Guard relay, or middle relay. By avoiding
using the same relays in these positions in the path, we ensure
@ -89,10 +89,10 @@ Status: Draft
'coupled' congestion control algorithms from the MPTCP
literature[COUPLED]. This both simplifies design, and improves
performance.
Then, the OP needs to link the two circuits together, as described in
[LINKING_CIRCUITS], [LINKING_EXIT], and [LINKING_SERVICE].
For ease of explanation, the primary circuit is the circuit with lower
RTT, and the secondary circuit is the circuit with higher RTT. Initial
RTT is measured during circuit linking, as described in
@ -100,7 +100,7 @@ Status: Draft
in Proposal 324. This means that during use, the primary circuit and
secondary circuit may switch roles, depending on unrelated network
congestion caused by other Tor clients.
We also support linking onion service circuits together. In this case,
only two rendezvous circuits are linked. Each of these RP circuits will
be constructed separately, and then linked. However, the same path
@ -109,17 +109,17 @@ Status: Draft
sharing some relays, this is not catastrophic. Multipath TCP researchers
we have consulted (see [ACKNOWLEDGEMENTS]), believe Tor's congestion
control from Proposal 324 to be sufficient in this rare case.
Only two circuits SHOULD be linked together. However, implementations
SHOULD make it easy for researchers to *test* more than two paths, as
this has been shown to assist in traffic analysis resistance[WTF_SPLIT].
At minimum, this means not hardcoding only two circuits in the
implementation.
If the number of circuits exceeds the current number of guard relays,
guard relays MAY be re-used, but implementations SHOULD use the same
number of Guards as paths.
Linked circuits MUST NOT be extended further once linked (ie:
'cannibalization' is not supported).
@ -127,11 +127,11 @@ Status: Draft
We propose a new protocol version in order to advertise support for
circuit linking on the relay side:
"Relay=4" -- Relay supports an 2 byte sequence number in a RELAY cell
header used for multipath circuit which are linked with the
new RELAY_CIRCUIT_LINK relay cell command.
XXX: Advertise this in onion service descriptor.
XXX: Onion service descriptor can advertise more than two circuits?
@ -144,77 +144,77 @@ Status: Draft
response. These commands create a 3way handshake, which allows each
endpoint to measure the initial RTT of each leg upon link, without
needing to wait for any data.
All three stages of this handshake are sent on *each* circuit leg to be
linked.
To save round trips, these cells SHOULD be combined with the initial
RELAY_BEGIN cell on the faster circuit leg, using Proposal 325. See
[LINKING_EXIT] and [LINKING_SERVICE] for more details on setup in each
case.
There are other ways to do this linking that we have considered, but
they seem not to be significantly better than this method, especially
since we can use Proposal 325 to eliminate the RTT cost of this setup
before sending data. For those other ideas, see [ALTERNATIVE_LINKING]
and [ALTERNATIVE_RTT], in the appendix.
The first two parts of the handshake establish the link, and enable
resumption:
16 -- RELAY_CIRCUIT_LINK
Sent from the OP to the exit/service in order to link
circuits together at the end point.
17 -- RELAY_CIRCUIT_LINKED
Sent from the exit/service to the OP, to confirm the circuits
were linked.
These cells have the following contents:
VERSION [1 byte]
PAYLOAD [variable, up to end of relay payload]
The VERSION tells us which circuit linking mechanism to use. At this
point in time, only 0x01 is recognized and is the one described by the
Conflux design.
For version 0x01, the PAYLOAD contains:
NONCE [32 bytes]
LAST_SEQNO_SENT [8 bytes]
LAST_SEQNO_RECV [8 bytes]
XXX: Should we let endpoints specify their preferred [SCHEDULING] alg
here, to override consensus params? This has benefits: eg low-memory
mobile clients can ask for an alg that is better for their reorder
queues. But it also has complexity risk, if the other endpoint does not
want to support it, because of its own memory issues.
The NONCE contains a random 256-bit secret, used to associate the two
circuits together. The nonce MUST NOT be shared outside of the circuit
transmission, or data may be injected into TCP streams. This means it
MUST NOT be logged to disk.
The two sequence number fields are 0 upon initial link, but non-zero in
the case of a resumption attempt (See [RESUMPTION]).
If either circuit does not receive a RELAY_CIRCUIT_LINKED response, both
circuits MUST be closed.
The third stage of the handshake exists to help the exit/service measure
initial RTT, for use in [SCHEDULING]:
18 -- RELAY_CIRCUIT_LINKED_RTT_ACK
Sent from the OP to the exit/service, to provide initial RTT
measurement for the exit/service.
For timeout of the handshake, clients SHOULD use the normal SOCKS/stream
timeout already in use for RELAY_BEGIN.
These three relay commands (RELAY_CIRCUIT_LINK, RELAY_CIRCUIT_LINKED,
and RELAY_CIRCUIT_LINKED_RTT_ACK) are send on *each* leg, to allow each
endpoint to measure the initial RTT of each leg.
@ -223,66 +223,66 @@ Status: Draft
To link exit circuits, two circuits to the same exit are built. The
client records the circuit build time of each.
If the circuits are being built on-demand, for immediate use, the
circuit with the lower build time SHOULD use Proposal 325 to append its
first RELAY cell to the RELAY_COMMAND_LINK, on the circuit with the
lower circuit build time. The exit MUST respond on this same leg. After
that, actual RTT measurements MUST be used to determine future
transmissions, as specified in [SCHEDULING].
The RTT times between RELAY_COMMAND_LINK and RELAY_COMMAND_LINKED are
measured by the client, to determine each circuit RTT to determine
primary vs secondary circuit use, and for packet scheduling. Similarly,
the exit measures the RTT times between RELAY_COMMAND_LINKED and
RELAY_COMMAND_LINKED_RTT_ACK, for the same purpose.
2.3. Linking circuits to an onion service [LINKING_SERVICE]
For onion services, we will only concern ourselves with linking
rendezvous circuits.
To join rendezvous circuits, clients make two introduce requests to a
service's intropoint, causing it to create two rendezvous circuits, to
meet the client at two separate rendezvous points. These introduce
requests MUST be sent to the same intropoint (due to potential use of
onionbalance), and SHOULD be sent back-to-back on the same intro
circuit. They MAY be combined with Proposal 325.
The first rendezvous circuit to get joined SHOULD use Proposal 325 to
append the RELAY_BEGIN command, and the service MUST answer on this
circuit, until RTT can be measured.
Once both circuits are linked and RTT is measured, packet scheduling
MUST be used, as per [SCHEDULING].
2.4. Congestion Control Application [CONGESTION_CONTROL]
The SENDMEs for congestion control are performed per-leg. As data
arrives, regardless of its ordering, it is counted towards SENDME
delivery. In this way, 'cwnd - package_window' of each leg always
reflects the available data to send on each leg. This is important for
[SCHEDULING].
The Congestion control Stream XON/XOFF can be sent on either leg, and
applies to the stream's transmission on both legs.
2.5. Sequencing [SEQUENCING]
With multiple paths for data, the problem of data re-ordering appears.
In other words, cells can arrive out of order from the two circuits
where cell N + 1 arrives before the cell N.
Handling this reordering operates after congestion control for each
circuit leg, but before relay cell command processing or stream data
delivery.
For the receiver to be able to reorder the receiving cells, a sequencing
scheme needs to be implemented. However, because Tor does not drop or
reorder packets inside of a circuit, this sequence number can be very
small. It only has to signal that a cell comes after those arriving on
another circuit.
To achieve this, we add a small sequence number to the common relay
header for all relay cells on linked circuits. This sequence number is
meant to signal the number of cells sent on the *other* leg, so that
@ -290,7 +290,7 @@ Status: Draft
It is different from the absolute sequence number used in
[LINKING_CIRCUITS] and [RESUMPTION], but can be derived from that
number, using relative arithmetic.
Relay command [1 byte]
Recognized [2 bytes]
StreamID [2 bytes]
@ -299,27 +299,27 @@ Status: Draft
> LongSeq [1 bit] # If this bit is set, use 31 bits for Seq
> Sequencing [7 or 31 bits]
Data [Remainder]
The sequence number is only set for the first cell after the endpoint
switches legs. In this case, LongSeq is set to 1, and the Sequencing
field is 31 more bits. Otherwise it is a 1 byte 0 value.
These fields MUST be present on ALL end-to-end relay cells on each leg
that come from the endpoint, following a RELAY_CIRCUIT_LINK command.
They are absent on 'leaky pipe' RELAY_COMMAND_DROP and
RELAY_COMMAND_PADDING_NEGOTIATED cells that come from middle relays, as
opposed to the endpoint, to support padding.
When an endpoint switches legs, on the first cell in a new leg, LongSeq
is set to 1, and the following 31 bits represent the *total* number of
cells sent on the *other* leg, before the switch. The receiver MUST wait
for that number of cells to arrive from the previous leg before
delivering that cell.
XXX: In the rare event that we send more than 2^31 cells (~1TB) on a
single leg, do we force a switch of legs, or expand the field further?
An alternative method of sequencing, that assumes that the endpoint
knows when it is going to switch, the cell before it switches, is
specified in [ALTERNATIVE_SEQUENCING]. Note that that method requires
@ -331,12 +331,12 @@ Status: Draft
2.6. Resumption [RESUMPTION]
In the event that a circuit leg is destroyed, they MAY be resumed.
Resumption is achieved by re-using the NONCE to the same endpoint
(either [LINKING_EXIT] or [LINKING_SERVICE]). The resumed path need
not use the same middle and guard relays as the destroyed leg(s), but
SHOULD NOT share any relays with any existing legs(s).
To provide resumption, endpoints store an absolute 64bit cell counter of
the last cell they have sent on a conflux pair (their LAST_SEQNO_SENT),
as well the last sequence number they have delivered in-order to edge
@ -345,14 +345,14 @@ Status: Draft
inflight cells (ie the 'package_window' from proposal 324), for each
leg, along with information corresponding to those cells' absolute
sequence numbers.
These 64 bit absolute counters can wrap without issue, as congestion
windows will never grow to 2^64 cells until well past the Singularity.
However, it is possible that extremely long, bulk circuits could exceed
2^64 total sent or received cells, so endpoints SHOULD handle wrapped
sequence numbers for purposes of computing retransmit information. (But
even this case is unlikely to happen within the next decade or so).
Upon resumption, the LAST_SEQNO_SENT and LAST_SEQNO_RECV fields are used
to convey the sequence numbers of the last cell the relay sent and
received on that leg. The other endpoint can use these sequence numbers
@ -360,27 +360,27 @@ Status: Draft
since that point, up to and including this absolute sequence number. If
LAST_SEQNO_SENT has not been received, the endpoint MAY transmit the
missing data, if it still has it buffered.
Because both endpoints get information about the other side's absolute
SENT sequence number, they will know exactly how many re-transmitted
packets to expect, if the circuit is successfully resumed.
Re-transmitters MUST NOT re-increment their absolute sent fields
while re-transmitting.
If it does not have this missing data due to memory pressure, that
endpoint MUST destroy *both* legs, as this represents unrecoverable
data loss.
Otherwise, the new circuit can be re-joined, and its RTT can be compared
to the remaining circuit to determine if the new leg is primary or
secondary.
It is even possible to resume conflux circuits where both legs have been
collapsed using this scheme, if endpoints continue to buffer their
unacked package_window data for some time after this close. However, see
[TRAFFIC_ANALYSIS] for more details on the full scope of this issue.
If endpoints are buffering package_window data, such data should be
given priority to be freed in any oomkiller invocation. See [MEMORY_DOS]
for more oomkiller information.
@ -393,14 +393,14 @@ Status: Draft
will have accurate information on the instantaneous available bandwidth
of each circuit leg, as 'cwnd - package_window' (see Section 3 of
Proposal 324).
Some additional RTT optimizations are also useful, to improve
responsiveness and minimize out-of-order queue sizes.
We specify two traffic schedulers from the multipath literature and
adapt them to Tor: [LOWRTT_TOR] and [BLEST_TOR]. [LOWRTT_TOR] also has
three variants, with different trade offs.
However, see the [TRAFFIC_ANALYSIS] sections of this proposal for
important details on how this selection can be changed, to reduce
website traffic fingerprinting.
@ -409,21 +409,21 @@ Status: Draft
This scheduling algorithm is based on the original [CONFLUX] paper, with
ideas from [MPTCP]'s minRTT/LowRTT scheduler.
In this algorithm, endpoints send cells on the circuit with lower RTT
(primary circuit). This continues while the congestion window on the
circuit has available room: ie whenever cwnd - package_window > 0.
Whenever the primary circuit's congestion window becomes full, the
secondary circuit is used. We stop reading on the send window source
(edge connection) when both congestion windows become full.
In this way, unlike original conflux, we switch to the secondary circuit
without causing congestion on the primary circuit. This improves both
load times, and overall throughput.
This behavior matches minRTT from [MPTCP], sometimes called LowRTT.
It may be better to stop reading on the edge connection when the primary
congestion window becomes full, rather than switch to the secondary
circuit as soon as the primary congestion window becomes full. (Ie: only
@ -432,7 +432,7 @@ Status: Draft
causes us to optimize for responsiveness and congestion avoidance,
rather than throughput. For evaluation, we will control this switching
behavior with a consensus parameter (see [CONSENSUS_PARAMETERS]).
Because of potential side channel risk (see [SIDE_CHANNELS]), a third
variant of this algorithm, where the primary circuit is chosen during
the [LINKING_CIRCUITS] handshake and never changed, is also possible
@ -444,25 +444,25 @@ Status: Draft
use this information to reorder transmitted data, to minimize
head-of-line blocking in the recipient (and thus minimize out-of-order
queues there).
BLEST_TOR uses the primary circuit until the congestion window is full.
Then, it uses the relative RTT times of the two circuits to calculate
how much data can be sent on the secondary circuit faster than if we
just waited for the primary circuit to become available.
This is achieved by computing two variables at the sender:
just waited for the primary circuit to become available.
This is achieved by computing two variables at the sender:
rtts = secondary.currRTT / primary.currRTT
primary_limit = primary.cwnd + (rtts-1)/2)*rtts
Note: This (rtts-1)/2 factor represents anticipated congestion window
growth over this period.. it may be different for Tor, depending on CC
alg.
If primary_limit < secondary.cwnd - (secondary.package_window + 1), then
there is enough space on the secondary circuit to send data faster than
we could than waiting for the primary circuit.
XXX: Note that BLEST uses total_send_window where we use secondary.cwnd
in this check. total_send_window is min(recv_win, CWND). But since Tor
does not use receive windows and instead uses stream XON/XOFF, we only
@ -472,29 +472,29 @@ Status: Draft
hopefully this is fine. If we need to, we could turn [REORDER_SIGNALING]
into a receive window indication of some kind, to indicate remaining
buffer size.
Otherwise, if the primary_limit condition is not hit, cease reading on
source edge connections until SENDME acks come back.
Here is the pseudocode for this:
while source.has_data_to_send():
if primary.cwnd > primary.package_window:
primary.send(source.get_packet())
continue
rtts = secondary.currRTT / primary.currRTT
primary_limit = (primary.cwnd + (rtts-1)/2)*rtts
if primary_limit < secondary.cwnd - (secondary.package_window+1):
secondary.send(source.get_packet())
else:
break # done for now, wait for SENDME to free up CWND and restart
Note that BLEST also has a parameter lambda that is updated whenever HoL
blocking occurs. Because it is expensive and takes significant time to
signal this over Tor, we omit this.
XXX: See [REORDER_SIGNALING] section if we want this lambda feedback.
3.3. Reorder queue signaling [REORDER_SIGNALING]
@ -502,7 +502,7 @@ Status: Draft
Reordering is fairly simple task. By following using the sequence
number field in [SEQUENCING], endpoints can know how many cells are
still in flight on the other leg.
To reorder them properly, a buffer of out of order cells needs to be
kept. On the Exit side, this can quickly become overwhelming
considering ten of thousands of possible circuits can be held open
@ -512,26 +512,26 @@ Status: Draft
Luckily, [BLEST_TOR] and the form of [LOWRTT_TOR] that only uses the
primary circuit will minimize or eliminate this out-of-order buffer.
XXX: The remainder of this section may be over-complicating things... We
only need these concepts if we want to use BLEST's lambda feedback. Though
turning this into some kind of receive window that indicates remaining
reorder buffer size may also help with the total_send_window also noted
in BLEST_TOR.
The default for this queue size is governed by the 'cflx_reorder_client'
and 'cflx_reorder_srv' consensus parameters (see [CONSENSUS_PARAMS]).
'cflx_reorder_srv' applies to Exits and onion services. Both parameters
can be overridden by Torrc, to larger or smaller than the consensus
parameter. (Low memory clients may want to lower it; SecureDrop onion
services or other high-upload services may want to raise it).
When the reorder queue hits this size, a RELAY_CONFLUX_XOFF is sent down
the circuit leg that has data waiting in the queue and use of that leg
SHOULD cease, until it drains to half of this value, at which point an
RELAY_CONFLUX_XON is sent. Note that this is different than the stream
XON/XOFF from Proposal 324.
XXX: [BLEST] actually does not cease use of a path in this case, but
instead uses this signal to adjust the lambda parameter, which biases
traffic away from that leg.
@ -543,38 +543,38 @@ Status: Draft
Both reorder queues and retransmit buffers inherently represent a memory
denial of service condition.
For [RESUMPTION] retransmit buffers, endpoints that support this feature
SHOULD free retransmit information as soon as they get close to memory
pressure. This prevents resumption while data is in flight, but will not
otherwise harm operation.
For reorder buffers, adversaries can potentially impact this at any
point, but most obviously and most severely from the client position.
In particular, clients can lie about sequence numbers, sending cells
with sequence numbers such that the next expected sequence number is
never sent. They can do this repeatedly on many circuits, to exhaust
memory at exits.
One option is to only allow actual traffic splitting in the downstream
direction, towards clients, and always use the primary circuit for
everything in the upstream direction. However, the ability to support
conflux from the client to the exit shows promise against traffic
analysis (see [WTF_SPLIT]).
The other option is to use [BLEST_TOR] from clients to exits, as it has
predictable interleaved cell scheduling, and minimizes reorder queues at
exits. If the ratios prescribed by that algorithm are not followed
within some bounds, the other endpoint can close both circuits, and free
the queue memory.
This still leaves the possibility that intermediate relays may block a
leg, allowing cells to traverse only one leg, thus still accumulating at
the reorder queue. Clients can also spoof sequence numbers similarly, to
make it appear that they are following [BLEST_TOR], without actually
sending any data on one of the legs.
To handle either of these cases, when a relay is under memory pressure,
the circuit OOM killer SHOULD free and close circuits with the oldest
reorder queue data, first. This heuristic was shown to be best during
@ -585,7 +585,7 @@ Status: Draft
Two potential side channels may be introduced by the use of Conflux:
1. RTT leg-use bias by altering SENDME latency
2. Location info leaks through the use of both leg's latencies
For RTT and leg-use bias, Guard relays could delay legs to introduce a
pattern into the delivery of cells at the exit relay, by varying the
latency of SENDME cells (every 100th cell) to change the distribution of
@ -593,14 +593,14 @@ Status: Draft
direction of traffic, to bias traffic load off of a particular Guard.
If an adversary controls both Guards, it could in theory send a binary
signal more easily, by alternating delays on each.
However, this risk weighs against the potential benefits against traffic
fingerprinting, as per [WTF_SPLIT]. Additionally, even ignoring
cryptographic tagging attacks, this side channel provides significantly
lower information over time than inter-packet-delay based side channels
that are already available to Guards and routers along the path to the
Guard.
Tor currently provides no defenses against already existing
single-circuit delay-based side channels, though both circuit padding
and [BACKLIT] are potential options it could conceivably deploy. The
@ -610,17 +610,17 @@ Status: Draft
conflux side channels as well. Circuit padding can also help to obscure
which cells are SENDMEs, since circuit padding is not counted towards
SENDME totals.
The second class of side channel is where the Exit relay may be able to
use the two legs to further infer more information about client
location. See [LATENCY_LEAK] for more details. It is unclear at this
time how much more severe this is for two paths than just one.
We preserve the ability to disable conflux to and from Exit relays
using consensus parameters, if these side channels prove more severe,
or if it proves possible possible to mitigate single-circuit side
channels, but not conflux side channels.
In all cases, all of these side channels appear less severe for onion
service traffic, due to the higher path variability due to relay
selection, as well as the end-to-end nature of conflux in that case.
@ -634,18 +634,18 @@ Status: Draft
packet counting and timing analysis at guards to guess which specific
circuits are linked. In particular, the 3 way handshake in
[LINKING_CIRCUITS] may be quite noticeable.
As one countermeasure, it may be possible to eliminate the third leg
(RELAY_CIRCUIT_LINKED_RTT_ACK) by computing the exit/service RTT via
measuring the time between CREATED/REND_JOINED and RELAY_CIRCUIT_LINK,
but this will introduce cross-component complexity into Tor's protocol
that could quickly become unwieldy and fragile.
Additionally, the conflux handshake may make onion services stand out
more, regardless of the number of stages in the handshake. For this
reason, it may be more wise to simply address these issues with circuit
padding machines during circuit setup (see padding-spec.txt).
Additional traffic analysis considerations arise when combining conflux
with padding, for purposes of mitigating traffic fingerprinting. For
this, it seems wise to treat the packet schedulers as another piece of a
@ -653,7 +653,7 @@ Status: Draft
machines, perhaps introducing randomness or fudge factors their
scheduling, as a parameterized distribution. For details, see
https://github.com/torproject/tor/blob/master/doc/HACKING/CircuitPaddingDevelopment.md
Finally, conflux may exacerbate forms of confirmation-based traffic
analysis that close circuits to determine concretely if they were in
use, since closing either leg might cause resumption to fail. TCP RST
@ -665,13 +665,13 @@ Status: Draft
more vulnerable to this attack. However, if the adversary controls the
client, they will notice the resumption re-link, and still obtain
confirmation that way.
It seems the only way to fully mitigate these kinds of attacks is with
the Snowflake pluggable transport, which provides its own resumption and
retransmit behavior. Additionally, Snowflake's use of UDP DTLS also
protects against TCP RST injection, which we suspect to be the main
vector for such attacks.
In the future, a DTLS or QUIC transport for Tor such as masque could
provide similar RST injection resistance, and resumption at Guard/Bridge
nodes, as well.
@ -718,12 +718,12 @@ A.1 BEGIN/END sequencing [ALTERNATIVE_SEQUENCING]
In this method of signaling, we increment the sequence number by 1 only
when we switch legs, and use BEGIN/END "bookends" to know that all data
on a leg has been received.
To achieve this, we add a small sequence number to the common relay
header for all relay cells on linked circuits, as well as a field to
signal the beginning of a sequence, intermediate data, and the end of a
sequence.
Relay command [1 byte]
Recognized [2 bytes]
StreamID [2 bytes]
@ -732,20 +732,20 @@ A.1 BEGIN/END sequencing [ALTERNATIVE_SEQUENCING]
> Switching [2 bits] # 01 = BEGIN, 00 = CONTINUE, 10 = END
> Sequencing [6 bits]
Data [PAYLOAD_LEN - 12 - Length bytes]
These fields MUST be present on ALL end-to-end relay cells on each leg
that come from the endpoint, following a RELAY_CIRCUIT_LINK command.
They are absent on 'leaky pipe' RELAY_COMMAND_DROP and
RELAY_COMMAND_PADDING_NEGOTIATED cells that come from middle relays, as
opposed to the endpoint, to support padding.
Sequence numbers are incremented by one when an endpoint switches legs
to transmit a cell. This number will wrap; implementations MUST treat
0 as the next sequence after 2^6-1. Because we do not expect to support
significantly more than 2 legs, and much fewer than 63, this is not an
issue.
The first cell on a new circuit MUST use the BEGIN code for switching.
Cells are delivered from that circuit until an END switching signal is
received, even if cells arrive first on another circuit with the next
@ -757,7 +757,7 @@ A.2 Alternative Link Handshake [ALTERNATIVE_LINKING]
The circuit linking in [LINKING_CIRCUITS] could be done as encrypted
ntor onionskin extension fields, similar to those used by v3 onions.
This approach has at least four problems:
i). For onion services, since onionskins traverse the intro circuit
and return on the rend circuit, this handshake cannot measure
@ -771,7 +771,7 @@ A.2 Alternative Link Handshake [ALTERNATIVE_LINKING]
iv). The overhead in processing this onionskin in onionskin queues
adds additional time for linking, even in the Exit case, making
that RTT potentially noisy.
Additionally, it is not clear that this approach actually saves us
anything in terms of setup time, because we can optimize away the
linking phase using Proposal 325, to combine initial RELAY_BEGIN cells
@ -782,31 +782,31 @@ A.3. Alternative RTT measurement [ALTERNATIVE_RTT]
Instead of measuring RTTs during [LINKING_CIRCUITS], we could create
PING/PONG cells, whose sole purpose is to allow endpoints to measure
RTT.
This was rejected for several reasons. First, during circuit use, we
already have SENDMEs to measure RTT. Every 100 cells (or
'circwindow_inc' from Proposal 324), we are able to re-measure RTT based
on the time between that Nth cell and the SENDME ack. So we only need
PING/PONG to measure initial circuit RTT.
If we were able to use onionskins, as per [ALTERNATIVE_LINKING] above,
we might be able to specify a PING/PONG/PING handshake solely for
measuring initial RTT, especially for onion service circuits.
The reason for not making a dedicated PING/PONG for this purpose is that
it is context-free. Even if we were able to use onionskins for linking
and resumption, to avoid additional data in handshake that just measures
RTT, we would have to enforce that this PING/PONG/PING only follows the
exact form needed by this proposal, at the expected time, and at no
other points.
If we do not enforce this specific use of PING/PONG/PING, it becomes
another potential side channel, for use in attacks such as [DROPMARK].
In general, Tor is planning to remove current forms of context-free and
semantic-free cells from its protocol:
https://gitlab.torproject.org/tpo/core/torspec/-/issues/39
We should not add more.
@ -814,15 +814,15 @@ Appendix B: Acknowledgments [ACKNOWLEDGEMENTS]
Thanks to Per Hurtig for helping us with the framing of the MPTCP
problem space.
Thanks to Simone Ferlin for clarifications on the [BLEST] paper, and for
pointing us at the Linux kernel implementation.
Extreme thanks goes again to Toke Høiland-Jørgensen, who helped
immensely towards our understanding of how the BLEST condition relates
to edge connection pushback, and for clearing up many other
misconceptions we had.
Finally, thanks to Mashael AlSabah, Kevin Bauer, Tariq Elahi, and Ian
Goldberg, for the original [CONFLUX] paper!