xemu/audio/sdlaudio.c

509 lines
14 KiB
C
Raw Normal View History

/*
* QEMU SDL audio driver
*
* Copyright (c) 2004-2005 Vassili Karpov (malc)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include <SDL.h>
#include <SDL_thread.h>
#include "qemu/module.h"
#include "audio.h"
#ifndef _WIN32
#ifdef __sun__
#define _POSIX_PTHREAD_SEMANTICS 1
#elif defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__DragonFly__)
#include <pthread.h>
#endif
#endif
#define AUDIO_CAP "sdl"
#include "audio_int.h"
typedef struct SDLVoiceOut {
HWVoiceOut hw;
int exit;
int initialized;
Audiodev *dev;
SDL_AudioDeviceID devid;
} SDLVoiceOut;
typedef struct SDLVoiceIn {
HWVoiceIn hw;
int exit;
int initialized;
Audiodev *dev;
SDL_AudioDeviceID devid;
} SDLVoiceIn;
static void GCC_FMT_ATTR (1, 2) sdl_logerr (const char *fmt, ...)
{
va_list ap;
va_start (ap, fmt);
AUD_vlog (AUDIO_CAP, fmt, ap);
va_end (ap);
AUD_log (AUDIO_CAP, "Reason: %s\n", SDL_GetError ());
}
static int aud_to_sdlfmt (AudioFormat fmt)
{
switch (fmt) {
case AUDIO_FORMAT_S8:
return AUDIO_S8;
case AUDIO_FORMAT_U8:
return AUDIO_U8;
case AUDIO_FORMAT_S16:
return AUDIO_S16LSB;
case AUDIO_FORMAT_U16:
return AUDIO_U16LSB;
case AUDIO_FORMAT_S32:
return AUDIO_S32LSB;
/* no unsigned 32-bit support in SDL */
case AUDIO_FORMAT_F32:
return AUDIO_F32LSB;
default:
dolog ("Internal logic error: Bad audio format %d\n", fmt);
#ifdef DEBUG_AUDIO
abort ();
#endif
return AUDIO_U8;
}
}
static int sdl_to_audfmt(int sdlfmt, AudioFormat *fmt, int *endianness)
{
switch (sdlfmt) {
case AUDIO_S8:
*endianness = 0;
*fmt = AUDIO_FORMAT_S8;
break;
case AUDIO_U8:
*endianness = 0;
*fmt = AUDIO_FORMAT_U8;
break;
case AUDIO_S16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S16;
break;
case AUDIO_U16LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_U16;
break;
case AUDIO_S16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S16;
break;
case AUDIO_U16MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_U16;
break;
case AUDIO_S32LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_S32;
break;
case AUDIO_S32MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_S32;
break;
case AUDIO_F32LSB:
*endianness = 0;
*fmt = AUDIO_FORMAT_F32;
break;
case AUDIO_F32MSB:
*endianness = 1;
*fmt = AUDIO_FORMAT_F32;
break;
default:
dolog ("Unrecognized SDL audio format %d\n", sdlfmt);
return -1;
}
return 0;
}
static SDL_AudioDeviceID sdl_open(SDL_AudioSpec *req, SDL_AudioSpec *obt,
int rec)
{
SDL_AudioDeviceID devid;
#ifndef _WIN32
int err;
sigset_t new, old;
/* Make sure potential threads created by SDL don't hog signals. */
err = sigfillset (&new);
if (err) {
dolog ("sdl_open: sigfillset failed: %s\n", strerror (errno));
return 0;
}
err = pthread_sigmask (SIG_BLOCK, &new, &old);
if (err) {
dolog ("sdl_open: pthread_sigmask failed: %s\n", strerror (err));
return 0;
}
#endif
devid = SDL_OpenAudioDevice(NULL, rec, req, obt, 0);
if (!devid) {
sdl_logerr("SDL_OpenAudioDevice for %s failed\n",
rec ? "recording" : "playback");
}
#ifndef _WIN32
err = pthread_sigmask (SIG_SETMASK, &old, NULL);
if (err) {
dolog ("sdl_open: pthread_sigmask (restore) failed: %s\n",
strerror (errno));
/* We have failed to restore original signal mask, all bets are off,
so exit the process */
exit (EXIT_FAILURE);
}
#endif
return devid;
}
static void sdl_close_out(SDLVoiceOut *sdl)
{
if (sdl->initialized) {
SDL_LockAudioDevice(sdl->devid);
sdl->exit = 1;
SDL_UnlockAudioDevice(sdl->devid);
SDL_PauseAudioDevice(sdl->devid, 1);
sdl->initialized = 0;
}
if (sdl->devid) {
SDL_CloseAudioDevice(sdl->devid);
sdl->devid = 0;
}
}
static void sdl_callback_out(void *opaque, Uint8 *buf, int len)
{
SDLVoiceOut *sdl = opaque;
HWVoiceOut *hw = &sdl->hw;
if (!sdl->exit) {
/* dolog("callback_out: len=%d avail=%zu\n", len, hw->pending_emul); */
while (hw->pending_emul && len) {
size_t write_len;
ssize_t start = (ssize_t)hw->pos_emul - hw->pending_emul;
if (start < 0) {
start += hw->size_emul;
}
assert(start >= 0 && start < hw->size_emul);
write_len = MIN(MIN(hw->pending_emul, len),
hw->size_emul - start);
memcpy(buf, hw->buf_emul + start, write_len);
hw->pending_emul -= write_len;
len -= write_len;
buf += write_len;
}
}
/* clear remaining buffer that we couldn't fill with data */
if (len) {
audio_pcm_info_clear_buf(&hw->info, buf,
len / hw->info.bytes_per_frame);
}
}
static void sdl_close_in(SDLVoiceIn *sdl)
{
if (sdl->initialized) {
SDL_LockAudioDevice(sdl->devid);
sdl->exit = 1;
SDL_UnlockAudioDevice(sdl->devid);
SDL_PauseAudioDevice(sdl->devid, 1);
sdl->initialized = 0;
}
if (sdl->devid) {
SDL_CloseAudioDevice(sdl->devid);
sdl->devid = 0;
}
}
static void sdl_callback_in(void *opaque, Uint8 *buf, int len)
{
SDLVoiceIn *sdl = opaque;
HWVoiceIn *hw = &sdl->hw;
if (sdl->exit) {
return;
}
/* dolog("callback_in: len=%d pending=%zu\n", len, hw->pending_emul); */
while (hw->pending_emul < hw->size_emul && len) {
size_t read_len = MIN(len, MIN(hw->size_emul - hw->pos_emul,
hw->size_emul - hw->pending_emul));
memcpy(hw->buf_emul + hw->pos_emul, buf, read_len);
hw->pending_emul += read_len;
hw->pos_emul = (hw->pos_emul + read_len) % hw->size_emul;
len -= read_len;
buf += read_len;
}
}
#define SDL_WRAPPER_FUNC(name, ret_type, args_decl, args, dir) \
static ret_type glue(sdl_, name)args_decl \
{ \
ret_type ret; \
glue(SDLVoice, dir) *sdl = (glue(SDLVoice, dir) *)hw; \
\
SDL_LockAudioDevice(sdl->devid); \
ret = glue(audio_generic_, name)args; \
SDL_UnlockAudioDevice(sdl->devid); \
\
return ret; \
}
#define SDL_WRAPPER_VOID_FUNC(name, args_decl, args, dir) \
static void glue(sdl_, name)args_decl \
{ \
glue(SDLVoice, dir) *sdl = (glue(SDLVoice, dir) *)hw; \
\
SDL_LockAudioDevice(sdl->devid); \
glue(audio_generic_, name)args; \
SDL_UnlockAudioDevice(sdl->devid); \
}
SDL_WRAPPER_FUNC(get_buffer_out, void *, (HWVoiceOut *hw, size_t *size),
(hw, size), Out)
audio: fix bug 1858488 The combined generic buffer management code and buffer run out code in function audio_generic_put_buffer_out has a problematic behaviour. A few hundred milliseconds after playback starts the mixing buffer and the generic buffer are nearly full and the following pattern can be seen. On first call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but the generic buffer will fill faster and is full when audio_pcm_hw_run_out returns. This is because emulated audio devices can produce playback data at a higher rate than the audio backend hardware consumes this data. On next call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but no audio data is transferred to the generic buffer because the buffer is already full. Then the pattern repeats. For the emulated audio device this looks like the audio timer period has doubled. This patch splits the combined generic buffer management code and buffer run out code and calls the buffer run out code after buffer management code to break this pattern. The bug report is for the wav audio backend. But the problem is not limited to this backend. All audio backends which use the audio_generic_put_buffer_out function show this problem. Buglink: https://bugs.launchpad.net/qemu/+bug/1858488 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-23 07:49:39 +00:00
SDL_WRAPPER_FUNC(put_buffer_out, size_t,
(HWVoiceOut *hw, void *buf, size_t size), (hw, buf, size), Out)
SDL_WRAPPER_FUNC(write, size_t,
(HWVoiceOut *hw, void *buf, size_t size), (hw, buf, size), Out)
SDL_WRAPPER_FUNC(read, size_t, (HWVoiceIn *hw, void *buf, size_t size),
(hw, buf, size), In)
SDL_WRAPPER_FUNC(get_buffer_in, void *, (HWVoiceIn *hw, size_t *size),
(hw, size), In)
SDL_WRAPPER_VOID_FUNC(put_buffer_in, (HWVoiceIn *hw, void *buf, size_t size),
(hw, buf, size), In)
#undef SDL_WRAPPER_FUNC
#undef SDL_WRAPPER_VOID_FUNC
static void sdl_fini_out(HWVoiceOut *hw)
{
SDLVoiceOut *sdl = (SDLVoiceOut *)hw;
sdl_close_out(sdl);
}
static int sdl_init_out(HWVoiceOut *hw, struct audsettings *as,
void *drv_opaque)
{
SDLVoiceOut *sdl = (SDLVoiceOut *)hw;
SDL_AudioSpec req, obt;
int endianness;
int err;
AudioFormat effective_fmt;
Audiodev *dev = drv_opaque;
AudiodevSdlPerDirectionOptions *spdo = dev->u.sdl.out;
struct audsettings obt_as;
req.freq = as->freq;
req.format = aud_to_sdlfmt (as->fmt);
req.channels = as->nchannels;
/*
* This is wrong. SDL samples are QEMU frames. The buffer size will be
* the requested buffer size multiplied by the number of channels.
*/
req.samples = audio_buffer_samples(
qapi_AudiodevSdlPerDirectionOptions_base(spdo), as, 11610);
req.callback = sdl_callback_out;
req.userdata = sdl;
sdl->dev = dev;
sdl->devid = sdl_open(&req, &obt, 0);
if (!sdl->devid) {
return -1;
}
err = sdl_to_audfmt(obt.format, &effective_fmt, &endianness);
if (err) {
sdl_close_out(sdl);
return -1;
}
obt_as.freq = obt.freq;
obt_as.nchannels = obt.channels;
obt_as.fmt = effective_fmt;
obt_as.endianness = endianness;
audio_pcm_init_info (&hw->info, &obt_as);
hw->samples = (spdo->has_buffer_count ? spdo->buffer_count : 4) *
obt.samples;
sdl->initialized = 1;
sdl->exit = 0;
return 0;
}
static void sdl_enable_out(HWVoiceOut *hw, bool enable)
{
SDLVoiceOut *sdl = (SDLVoiceOut *)hw;
SDL_PauseAudioDevice(sdl->devid, !enable);
}
static void sdl_fini_in(HWVoiceIn *hw)
{
SDLVoiceIn *sdl = (SDLVoiceIn *)hw;
sdl_close_in(sdl);
}
static int sdl_init_in(HWVoiceIn *hw, audsettings *as, void *drv_opaque)
{
SDLVoiceIn *sdl = (SDLVoiceIn *)hw;
SDL_AudioSpec req, obt;
int endianness;
int err;
AudioFormat effective_fmt;
Audiodev *dev = drv_opaque;
AudiodevSdlPerDirectionOptions *spdo = dev->u.sdl.in;
struct audsettings obt_as;
req.freq = as->freq;
req.format = aud_to_sdlfmt(as->fmt);
req.channels = as->nchannels;
/* SDL samples are QEMU frames */
req.samples = audio_buffer_frames(
qapi_AudiodevSdlPerDirectionOptions_base(spdo), as, 11610);
req.callback = sdl_callback_in;
req.userdata = sdl;
sdl->dev = dev;
sdl->devid = sdl_open(&req, &obt, 1);
if (!sdl->devid) {
return -1;
}
err = sdl_to_audfmt(obt.format, &effective_fmt, &endianness);
if (err) {
sdl_close_in(sdl);
return -1;
}
obt_as.freq = obt.freq;
obt_as.nchannels = obt.channels;
obt_as.fmt = effective_fmt;
obt_as.endianness = endianness;
audio_pcm_init_info(&hw->info, &obt_as);
hw->samples = (spdo->has_buffer_count ? spdo->buffer_count : 4) *
obt.samples;
hw->size_emul = hw->samples * hw->info.bytes_per_frame;
hw->buf_emul = g_malloc(hw->size_emul);
hw->pos_emul = hw->pending_emul = 0;
sdl->initialized = 1;
sdl->exit = 0;
return 0;
}
static void sdl_enable_in(HWVoiceIn *hw, bool enable)
{
SDLVoiceIn *sdl = (SDLVoiceIn *)hw;
SDL_PauseAudioDevice(sdl->devid, !enable);
}
static void *sdl_audio_init(Audiodev *dev)
{
if (SDL_InitSubSystem (SDL_INIT_AUDIO)) {
sdl_logerr ("SDL failed to initialize audio subsystem\n");
return NULL;
}
return dev;
}
static void sdl_audio_fini (void *opaque)
{
SDL_QuitSubSystem (SDL_INIT_AUDIO);
}
static struct audio_pcm_ops sdl_pcm_ops = {
.init_out = sdl_init_out,
.fini_out = sdl_fini_out,
audio: fix bug 1858488 The combined generic buffer management code and buffer run out code in function audio_generic_put_buffer_out has a problematic behaviour. A few hundred milliseconds after playback starts the mixing buffer and the generic buffer are nearly full and the following pattern can be seen. On first call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but the generic buffer will fill faster and is full when audio_pcm_hw_run_out returns. This is because emulated audio devices can produce playback data at a higher rate than the audio backend hardware consumes this data. On next call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but no audio data is transferred to the generic buffer because the buffer is already full. Then the pattern repeats. For the emulated audio device this looks like the audio timer period has doubled. This patch splits the combined generic buffer management code and buffer run out code and calls the buffer run out code after buffer management code to break this pattern. The bug report is for the wav audio backend. But the problem is not limited to this backend. All audio backends which use the audio_generic_put_buffer_out function show this problem. Buglink: https://bugs.launchpad.net/qemu/+bug/1858488 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-23 07:49:39 +00:00
/* wrapper for audio_generic_write */
.write = sdl_write,
audio: fix bug 1858488 The combined generic buffer management code and buffer run out code in function audio_generic_put_buffer_out has a problematic behaviour. A few hundred milliseconds after playback starts the mixing buffer and the generic buffer are nearly full and the following pattern can be seen. On first call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but the generic buffer will fill faster and is full when audio_pcm_hw_run_out returns. This is because emulated audio devices can produce playback data at a higher rate than the audio backend hardware consumes this data. On next call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but no audio data is transferred to the generic buffer because the buffer is already full. Then the pattern repeats. For the emulated audio device this looks like the audio timer period has doubled. This patch splits the combined generic buffer management code and buffer run out code and calls the buffer run out code after buffer management code to break this pattern. The bug report is for the wav audio backend. But the problem is not limited to this backend. All audio backends which use the audio_generic_put_buffer_out function show this problem. Buglink: https://bugs.launchpad.net/qemu/+bug/1858488 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-23 07:49:39 +00:00
/* wrapper for audio_generic_get_buffer_out */
.get_buffer_out = sdl_get_buffer_out,
audio: fix bug 1858488 The combined generic buffer management code and buffer run out code in function audio_generic_put_buffer_out has a problematic behaviour. A few hundred milliseconds after playback starts the mixing buffer and the generic buffer are nearly full and the following pattern can be seen. On first call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but the generic buffer will fill faster and is full when audio_pcm_hw_run_out returns. This is because emulated audio devices can produce playback data at a higher rate than the audio backend hardware consumes this data. On next call of audio_pcm_hw_run_out the buffer run code in audio_generic_put_buffer_out writes some data to the audio hardware but no audio data is transferred to the generic buffer because the buffer is already full. Then the pattern repeats. For the emulated audio device this looks like the audio timer period has doubled. This patch splits the combined generic buffer management code and buffer run out code and calls the buffer run out code after buffer management code to break this pattern. The bug report is for the wav audio backend. But the problem is not limited to this backend. All audio backends which use the audio_generic_put_buffer_out function show this problem. Buglink: https://bugs.launchpad.net/qemu/+bug/1858488 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-01-23 07:49:39 +00:00
/* wrapper for audio_generic_put_buffer_out */
.put_buffer_out = sdl_put_buffer_out,
.enable_out = sdl_enable_out,
.init_in = sdl_init_in,
.fini_in = sdl_fini_in,
/* wrapper for audio_generic_read */
.read = sdl_read,
/* wrapper for audio_generic_get_buffer_in */
.get_buffer_in = sdl_get_buffer_in,
/* wrapper for audio_generic_put_buffer_in */
.put_buffer_in = sdl_put_buffer_in,
.enable_in = sdl_enable_in,
};
static struct audio_driver sdl_audio_driver = {
.name = "sdl",
.descr = "SDL http://www.libsdl.org",
.init = sdl_audio_init,
.fini = sdl_audio_fini,
.pcm_ops = &sdl_pcm_ops,
.can_be_default = 1,
.max_voices_out = INT_MAX,
.max_voices_in = INT_MAX,
.voice_size_out = sizeof(SDLVoiceOut),
.voice_size_in = sizeof(SDLVoiceIn),
};
static void register_audio_sdl(void)
{
audio_driver_register(&sdl_audio_driver);
}
type_init(register_audio_sdl);