xemu/slirp/slirp.c

1483 lines
45 KiB
C
Raw Normal View History

/*
* libslirp glue
*
* Copyright (c) 2004-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/timer.h"
#include "qemu/error-report.h"
#include "chardev/char-fe.h"
#include "slirp.h"
#include "hw/hw.h"
#include "qemu/cutils.h"
#ifndef _WIN32
#include <net/if.h>
#endif
/* host loopback address */
struct in_addr loopback_addr;
/* host loopback network mask */
unsigned long loopback_mask;
/* emulated hosts use the MAC addr 52:55:IP:IP:IP:IP */
static const uint8_t special_ethaddr[ETH_ALEN] = {
0x52, 0x55, 0x00, 0x00, 0x00, 0x00
};
u_int curtime;
static QTAILQ_HEAD(slirp_instances, Slirp) slirp_instances =
QTAILQ_HEAD_INITIALIZER(slirp_instances);
static struct in_addr dns_addr;
#ifndef _WIN32
static struct in6_addr dns6_addr;
#endif
static u_int dns_addr_time;
#ifndef _WIN32
static u_int dns6_addr_time;
#endif
#define TIMEOUT_FAST 2 /* milliseconds */
#define TIMEOUT_SLOW 499 /* milliseconds */
/* for the aging of certain requests like DNS */
#define TIMEOUT_DEFAULT 1000 /* milliseconds */
#ifdef _WIN32
int get_dns_addr(struct in_addr *pdns_addr)
{
FIXED_INFO *FixedInfo=NULL;
ULONG BufLen;
DWORD ret;
IP_ADDR_STRING *pIPAddr;
struct in_addr tmp_addr;
if (dns_addr.s_addr != 0 && (curtime - dns_addr_time) < TIMEOUT_DEFAULT) {
*pdns_addr = dns_addr;
return 0;
}
FixedInfo = (FIXED_INFO *)GlobalAlloc(GPTR, sizeof(FIXED_INFO));
BufLen = sizeof(FIXED_INFO);
if (ERROR_BUFFER_OVERFLOW == GetNetworkParams(FixedInfo, &BufLen)) {
if (FixedInfo) {
GlobalFree(FixedInfo);
FixedInfo = NULL;
}
FixedInfo = GlobalAlloc(GPTR, BufLen);
}
if ((ret = GetNetworkParams(FixedInfo, &BufLen)) != ERROR_SUCCESS) {
printf("GetNetworkParams failed. ret = %08x\n", (u_int)ret );
if (FixedInfo) {
GlobalFree(FixedInfo);
FixedInfo = NULL;
}
return -1;
}
pIPAddr = &(FixedInfo->DnsServerList);
inet_aton(pIPAddr->IpAddress.String, &tmp_addr);
*pdns_addr = tmp_addr;
dns_addr = tmp_addr;
dns_addr_time = curtime;
if (FixedInfo) {
GlobalFree(FixedInfo);
FixedInfo = NULL;
}
return 0;
}
int get_dns6_addr(struct in6_addr *pdns6_addr, uint32_t *scope_id)
{
return -1;
}
static void winsock_cleanup(void)
{
WSACleanup();
}
#else
static int get_dns_addr_cached(void *pdns_addr, void *cached_addr,
socklen_t addrlen,
struct stat *cached_stat, u_int *cached_time)
{
struct stat old_stat;
if (curtime - *cached_time < TIMEOUT_DEFAULT) {
memcpy(pdns_addr, cached_addr, addrlen);
return 0;
}
old_stat = *cached_stat;
if (stat("/etc/resolv.conf", cached_stat) != 0) {
return -1;
}
if (cached_stat->st_dev == old_stat.st_dev
&& cached_stat->st_ino == old_stat.st_ino
&& cached_stat->st_size == old_stat.st_size
&& cached_stat->st_mtime == old_stat.st_mtime) {
memcpy(pdns_addr, cached_addr, addrlen);
return 0;
}
return 1;
}
static int get_dns_addr_resolv_conf(int af, void *pdns_addr, void *cached_addr,
socklen_t addrlen, uint32_t *scope_id,
u_int *cached_time)
{
char buff[512];
char buff2[257];
FILE *f;
int found = 0;
void *tmp_addr = alloca(addrlen);
unsigned if_index;
f = fopen("/etc/resolv.conf", "r");
if (!f)
return -1;
#ifdef DEBUG
fprintf(stderr, "IP address of your DNS(s): ");
#endif
while (fgets(buff, 512, f) != NULL) {
if (sscanf(buff, "nameserver%*[ \t]%256s", buff2) == 1) {
char *c = strchr(buff2, '%');
if (c) {
if_index = if_nametoindex(c + 1);
*c = '\0';
} else {
if_index = 0;
}
if (!inet_pton(af, buff2, tmp_addr)) {
continue;
}
/* If it's the first one, set it to dns_addr */
if (!found) {
memcpy(pdns_addr, tmp_addr, addrlen);
memcpy(cached_addr, tmp_addr, addrlen);
if (scope_id) {
*scope_id = if_index;
}
*cached_time = curtime;
}
#ifdef DEBUG
else
fprintf(stderr, ", ");
#endif
if (++found > 3) {
#ifdef DEBUG
fprintf(stderr, "(more)");
#endif
break;
}
#ifdef DEBUG
else {
char s[INET6_ADDRSTRLEN];
const char *res = inet_ntop(af, tmp_addr, s, sizeof(s));
if (!res) {
res = "(string conversion error)";
}
fprintf(stderr, "%s", res);
}
#endif
}
}
fclose(f);
if (!found)
return -1;
return 0;
}
int get_dns_addr(struct in_addr *pdns_addr)
{
static struct stat dns_addr_stat;
if (dns_addr.s_addr != 0) {
int ret;
ret = get_dns_addr_cached(pdns_addr, &dns_addr, sizeof(dns_addr),
&dns_addr_stat, &dns_addr_time);
if (ret <= 0) {
return ret;
}
}
return get_dns_addr_resolv_conf(AF_INET, pdns_addr, &dns_addr,
sizeof(dns_addr), NULL, &dns_addr_time);
}
int get_dns6_addr(struct in6_addr *pdns6_addr, uint32_t *scope_id)
{
static struct stat dns6_addr_stat;
if (!in6_zero(&dns6_addr)) {
int ret;
ret = get_dns_addr_cached(pdns6_addr, &dns6_addr, sizeof(dns6_addr),
&dns6_addr_stat, &dns6_addr_time);
if (ret <= 0) {
return ret;
}
}
return get_dns_addr_resolv_conf(AF_INET6, pdns6_addr, &dns6_addr,
sizeof(dns6_addr),
scope_id, &dns6_addr_time);
}
#endif
static void slirp_init_once(void)
{
static int initialized;
#ifdef _WIN32
WSADATA Data;
#endif
if (initialized) {
return;
}
initialized = 1;
#ifdef _WIN32
WSAStartup(MAKEWORD(2,0), &Data);
atexit(winsock_cleanup);
#endif
loopback_addr.s_addr = htonl(INADDR_LOOPBACK);
loopback_mask = htonl(IN_CLASSA_NET);
}
static void slirp_state_save(QEMUFile *f, void *opaque);
static int slirp_state_load(QEMUFile *f, void *opaque, int version_id);
Slirp *slirp_init(int restricted, bool in_enabled, struct in_addr vnetwork,
struct in_addr vnetmask, struct in_addr vhost,
bool in6_enabled,
struct in6_addr vprefix_addr6, uint8_t vprefix_len,
struct in6_addr vhost6, const char *vhostname,
const char *tftp_path, const char *bootfile,
struct in_addr vdhcp_start, struct in_addr vnameserver,
struct in6_addr vnameserver6, const char **vdnssearch,
void *opaque)
{
Slirp *slirp = g_malloc0(sizeof(Slirp));
slirp_init_once();
slirp->grand = g_rand_new();
slirp->restricted = restricted;
slirp->in_enabled = in_enabled;
slirp->in6_enabled = in6_enabled;
if_init(slirp);
ip_init(slirp);
ip6_init(slirp);
/* Initialise mbufs *after* setting the MTU */
m_init(slirp);
slirp->vnetwork_addr = vnetwork;
slirp->vnetwork_mask = vnetmask;
slirp->vhost_addr = vhost;
slirp->vprefix_addr6 = vprefix_addr6;
slirp->vprefix_len = vprefix_len;
slirp->vhost_addr6 = vhost6;
if (vhostname) {
pstrcpy(slirp->client_hostname, sizeof(slirp->client_hostname),
vhostname);
}
slirp->tftp_prefix = g_strdup(tftp_path);
slirp->bootp_filename = g_strdup(bootfile);
slirp->vdhcp_startaddr = vdhcp_start;
slirp->vnameserver_addr = vnameserver;
slirp->vnameserver_addr6 = vnameserver6;
if (vdnssearch) {
translate_dnssearch(slirp, vdnssearch);
}
slirp->opaque = opaque;
register_savevm(NULL, "slirp", 0, 4,
slirp_state_save, slirp_state_load, slirp);
QTAILQ_INSERT_TAIL(&slirp_instances, slirp, entry);
return slirp;
}
void slirp_cleanup(Slirp *slirp)
{
QTAILQ_REMOVE(&slirp_instances, slirp, entry);
unregister_savevm(NULL, "slirp", slirp);
ip_cleanup(slirp);
ip6_cleanup(slirp);
m_cleanup(slirp);
g_rand_free(slirp->grand);
g_free(slirp->vdnssearch);
g_free(slirp->tftp_prefix);
g_free(slirp->bootp_filename);
g_free(slirp);
}
#define CONN_CANFSEND(so) (((so)->so_state & (SS_FCANTSENDMORE|SS_ISFCONNECTED)) == SS_ISFCONNECTED)
#define CONN_CANFRCV(so) (((so)->so_state & (SS_FCANTRCVMORE|SS_ISFCONNECTED)) == SS_ISFCONNECTED)
static void slirp_update_timeout(uint32_t *timeout)
{
Slirp *slirp;
uint32_t t;
if (*timeout <= TIMEOUT_FAST) {
return;
}
t = MIN(1000, *timeout);
/* If we have tcp timeout with slirp, then we will fill @timeout with
* more precise value.
*/
QTAILQ_FOREACH(slirp, &slirp_instances, entry) {
if (slirp->time_fasttimo) {
*timeout = TIMEOUT_FAST;
return;
}
if (slirp->do_slowtimo) {
t = MIN(TIMEOUT_SLOW, t);
}
}
*timeout = t;
}
void slirp_pollfds_fill(GArray *pollfds, uint32_t *timeout)
{
Slirp *slirp;
struct socket *so, *so_next;
if (QTAILQ_EMPTY(&slirp_instances)) {
return;
}
/*
* First, TCP sockets
*/
QTAILQ_FOREACH(slirp, &slirp_instances, entry) {
/*
* *_slowtimo needs calling if there are IP fragments
* in the fragment queue, or there are TCP connections active
*/
slirp->do_slowtimo = ((slirp->tcb.so_next != &slirp->tcb) ||
(&slirp->ipq.ip_link != slirp->ipq.ip_link.next));
for (so = slirp->tcb.so_next; so != &slirp->tcb;
so = so_next) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
int events = 0;
so_next = so->so_next;
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
so->pollfds_idx = -1;
/*
* See if we need a tcp_fasttimo
*/
if (slirp->time_fasttimo == 0 &&
so->so_tcpcb->t_flags & TF_DELACK) {
slirp->time_fasttimo = curtime; /* Flag when want a fasttimo */
}
/*
* NOFDREF can include still connecting to local-host,
* newly socreated() sockets etc. Don't want to select these.
*/
if (so->so_state & SS_NOFDREF || so->s == -1) {
continue;
}
/*
* Set for reading sockets which are accepting
*/
if (so->so_state & SS_FACCEPTCONN) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
GPollFD pfd = {
.fd = so->s,
.events = G_IO_IN | G_IO_HUP | G_IO_ERR,
};
so->pollfds_idx = pollfds->len;
g_array_append_val(pollfds, pfd);
continue;
}
/*
* Set for writing sockets which are connecting
*/
if (so->so_state & SS_ISFCONNECTING) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
GPollFD pfd = {
.fd = so->s,
.events = G_IO_OUT | G_IO_ERR,
};
so->pollfds_idx = pollfds->len;
g_array_append_val(pollfds, pfd);
continue;
}
/*
* Set for writing if we are connected, can send more, and
* we have something to send
*/
if (CONN_CANFSEND(so) && so->so_rcv.sb_cc) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
events |= G_IO_OUT | G_IO_ERR;
}
/*
* Set for reading (and urgent data) if we are connected, can
* receive more, and we have room for it XXX /2 ?
*/
if (CONN_CANFRCV(so) &&
(so->so_snd.sb_cc < (so->so_snd.sb_datalen/2))) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
events |= G_IO_IN | G_IO_HUP | G_IO_ERR | G_IO_PRI;
}
if (events) {
GPollFD pfd = {
.fd = so->s,
.events = events,
};
so->pollfds_idx = pollfds->len;
g_array_append_val(pollfds, pfd);
}
}
/*
* UDP sockets
*/
for (so = slirp->udb.so_next; so != &slirp->udb;
so = so_next) {
so_next = so->so_next;
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
so->pollfds_idx = -1;
/*
* See if it's timed out
*/
if (so->so_expire) {
if (so->so_expire <= curtime) {
udp_detach(so);
continue;
} else {
slirp->do_slowtimo = true; /* Let socket expire */
}
}
/*
* When UDP packets are received from over the
* link, they're sendto()'d straight away, so
* no need for setting for writing
* Limit the number of packets queued by this session
* to 4. Note that even though we try and limit this
* to 4 packets, the session could have more queued
* if the packets needed to be fragmented
* (XXX <= 4 ?)
*/
if ((so->so_state & SS_ISFCONNECTED) && so->so_queued <= 4) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
GPollFD pfd = {
.fd = so->s,
.events = G_IO_IN | G_IO_HUP | G_IO_ERR,
};
so->pollfds_idx = pollfds->len;
g_array_append_val(pollfds, pfd);
}
}
/*
* ICMP sockets
*/
for (so = slirp->icmp.so_next; so != &slirp->icmp;
so = so_next) {
so_next = so->so_next;
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
so->pollfds_idx = -1;
/*
* See if it's timed out
*/
if (so->so_expire) {
if (so->so_expire <= curtime) {
icmp_detach(so);
continue;
} else {
slirp->do_slowtimo = true; /* Let socket expire */
}
}
if (so->so_state & SS_ISFCONNECTED) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
GPollFD pfd = {
.fd = so->s,
.events = G_IO_IN | G_IO_HUP | G_IO_ERR,
};
so->pollfds_idx = pollfds->len;
g_array_append_val(pollfds, pfd);
}
}
}
slirp_update_timeout(timeout);
}
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
void slirp_pollfds_poll(GArray *pollfds, int select_error)
{
Slirp *slirp;
struct socket *so, *so_next;
int ret;
if (QTAILQ_EMPTY(&slirp_instances)) {
return;
}
curtime = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
QTAILQ_FOREACH(slirp, &slirp_instances, entry) {
/*
* See if anything has timed out
*/
if (slirp->time_fasttimo &&
((curtime - slirp->time_fasttimo) >= TIMEOUT_FAST)) {
tcp_fasttimo(slirp);
slirp->time_fasttimo = 0;
}
if (slirp->do_slowtimo &&
((curtime - slirp->last_slowtimo) >= TIMEOUT_SLOW)) {
ip_slowtimo(slirp);
tcp_slowtimo(slirp);
slirp->last_slowtimo = curtime;
}
/*
* Check sockets
*/
if (!select_error) {
/*
* Check TCP sockets
*/
for (so = slirp->tcb.so_next; so != &slirp->tcb;
so = so_next) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
int revents;
so_next = so->so_next;
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
revents = 0;
if (so->pollfds_idx != -1) {
revents = g_array_index(pollfds, GPollFD,
so->pollfds_idx).revents;
}
if (so->so_state & SS_NOFDREF || so->s == -1) {
continue;
}
/*
* Check for URG data
* This will soread as well, so no need to
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
* test for G_IO_IN below if this succeeds
*/
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
if (revents & G_IO_PRI) {
ret = sorecvoob(so);
if (ret < 0) {
/* Socket error might have resulted in the socket being
* removed, do not try to do anything more with it. */
continue;
}
}
/*
* Check sockets for reading
*/
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
else if (revents & (G_IO_IN | G_IO_HUP | G_IO_ERR)) {
/*
* Check for incoming connections
*/
if (so->so_state & SS_FACCEPTCONN) {
tcp_connect(so);
continue;
} /* else */
ret = soread(so);
/* Output it if we read something */
if (ret > 0) {
tcp_output(sototcpcb(so));
}
if (ret < 0) {
/* Socket error might have resulted in the socket being
* removed, do not try to do anything more with it. */
continue;
}
}
/*
* Check sockets for writing
*/
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
if (!(so->so_state & SS_NOFDREF) &&
(revents & (G_IO_OUT | G_IO_ERR))) {
/*
* Check for non-blocking, still-connecting sockets
*/
if (so->so_state & SS_ISFCONNECTING) {
/* Connected */
so->so_state &= ~SS_ISFCONNECTING;
ret = send(so->s, (const void *) &ret, 0, 0);
if (ret < 0) {
/* XXXXX Must fix, zero bytes is a NOP */
if (errno == EAGAIN || errno == EWOULDBLOCK ||
errno == EINPROGRESS || errno == ENOTCONN) {
continue;
}
/* else failed */
so->so_state &= SS_PERSISTENT_MASK;
so->so_state |= SS_NOFDREF;
}
/* else so->so_state &= ~SS_ISFCONNECTING; */
/*
* Continue tcp_input
*/
tcp_input((struct mbuf *)NULL, sizeof(struct ip), so,
so->so_ffamily);
/* continue; */
} else {
ret = sowrite(so);
}
/*
* XXXXX If we wrote something (a lot), there
* could be a need for a window update.
* In the worst case, the remote will send
* a window probe to get things going again
*/
}
/*
* Probe a still-connecting, non-blocking socket
* to check if it's still alive
*/
#ifdef PROBE_CONN
if (so->so_state & SS_ISFCONNECTING) {
ret = qemu_recv(so->s, &ret, 0, 0);
if (ret < 0) {
/* XXX */
if (errno == EAGAIN || errno == EWOULDBLOCK ||
errno == EINPROGRESS || errno == ENOTCONN) {
continue; /* Still connecting, continue */
}
/* else failed */
so->so_state &= SS_PERSISTENT_MASK;
so->so_state |= SS_NOFDREF;
/* tcp_input will take care of it */
} else {
ret = send(so->s, &ret, 0, 0);
if (ret < 0) {
/* XXX */
if (errno == EAGAIN || errno == EWOULDBLOCK ||
errno == EINPROGRESS || errno == ENOTCONN) {
continue;
}
/* else failed */
so->so_state &= SS_PERSISTENT_MASK;
so->so_state |= SS_NOFDREF;
} else {
so->so_state &= ~SS_ISFCONNECTING;
}
}
tcp_input((struct mbuf *)NULL, sizeof(struct ip), so,
so->so_ffamily);
} /* SS_ISFCONNECTING */
#endif
}
/*
* Now UDP sockets.
* Incoming packets are sent straight away, they're not buffered.
* Incoming UDP data isn't buffered either.
*/
for (so = slirp->udb.so_next; so != &slirp->udb;
so = so_next) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
int revents;
so_next = so->so_next;
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
revents = 0;
if (so->pollfds_idx != -1) {
revents = g_array_index(pollfds, GPollFD,
so->pollfds_idx).revents;
}
if (so->s != -1 &&
(revents & (G_IO_IN | G_IO_HUP | G_IO_ERR))) {
sorecvfrom(so);
}
}
/*
* Check incoming ICMP relies.
*/
for (so = slirp->icmp.so_next; so != &slirp->icmp;
so = so_next) {
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
int revents;
so_next = so->so_next;
revents = 0;
if (so->pollfds_idx != -1) {
revents = g_array_index(pollfds, GPollFD,
so->pollfds_idx).revents;
}
slirp: switch to GPollFD Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-20 10:28:28 +00:00
if (so->s != -1 &&
(revents & (G_IO_IN | G_IO_HUP | G_IO_ERR))) {
icmp_receive(so);
}
}
}
if_start(slirp);
}
}
static void arp_input(Slirp *slirp, const uint8_t *pkt, int pkt_len)
{
struct slirp_arphdr *ah = (struct slirp_arphdr *)(pkt + ETH_HLEN);
uint8_t arp_reply[MAX(ETH_HLEN + sizeof(struct slirp_arphdr), 64)];
struct ethhdr *reh = (struct ethhdr *)arp_reply;
struct slirp_arphdr *rah = (struct slirp_arphdr *)(arp_reply + ETH_HLEN);
int ar_op;
struct ex_list *ex_ptr;
if (!slirp->in_enabled) {
return;
}
ar_op = ntohs(ah->ar_op);
switch(ar_op) {
case ARPOP_REQUEST:
if (ah->ar_tip == ah->ar_sip) {
/* Gratuitous ARP */
arp_table_add(slirp, ah->ar_sip, ah->ar_sha);
return;
}
if ((ah->ar_tip & slirp->vnetwork_mask.s_addr) ==
slirp->vnetwork_addr.s_addr) {
if (ah->ar_tip == slirp->vnameserver_addr.s_addr ||
ah->ar_tip == slirp->vhost_addr.s_addr)
goto arp_ok;
for (ex_ptr = slirp->exec_list; ex_ptr; ex_ptr = ex_ptr->ex_next) {
if (ex_ptr->ex_addr.s_addr == ah->ar_tip)
goto arp_ok;
}
return;
arp_ok:
memset(arp_reply, 0, sizeof(arp_reply));
arp_table_add(slirp, ah->ar_sip, ah->ar_sha);
/* ARP request for alias/dns mac address */
memcpy(reh->h_dest, pkt + ETH_ALEN, ETH_ALEN);
memcpy(reh->h_source, special_ethaddr, ETH_ALEN - 4);
memcpy(&reh->h_source[2], &ah->ar_tip, 4);
reh->h_proto = htons(ETH_P_ARP);
rah->ar_hrd = htons(1);
rah->ar_pro = htons(ETH_P_IP);
rah->ar_hln = ETH_ALEN;
rah->ar_pln = 4;
rah->ar_op = htons(ARPOP_REPLY);
memcpy(rah->ar_sha, reh->h_source, ETH_ALEN);
rah->ar_sip = ah->ar_tip;
memcpy(rah->ar_tha, ah->ar_sha, ETH_ALEN);
rah->ar_tip = ah->ar_sip;
slirp_output(slirp->opaque, arp_reply, sizeof(arp_reply));
}
break;
case ARPOP_REPLY:
arp_table_add(slirp, ah->ar_sip, ah->ar_sha);
break;
default:
break;
}
}
void slirp_input(Slirp *slirp, const uint8_t *pkt, int pkt_len)
{
struct mbuf *m;
int proto;
if (pkt_len < ETH_HLEN)
return;
proto = ntohs(*(uint16_t *)(pkt + 12));
switch(proto) {
case ETH_P_ARP:
arp_input(slirp, pkt, pkt_len);
break;
case ETH_P_IP:
case ETH_P_IPV6:
m = m_get(slirp);
if (!m)
return;
/* Note: we add 2 to align the IP header on 4 bytes,
* and add the margin for the tcpiphdr overhead */
if (M_FREEROOM(m) < pkt_len + TCPIPHDR_DELTA + 2) {
m_inc(m, pkt_len + TCPIPHDR_DELTA + 2);
}
m->m_len = pkt_len + TCPIPHDR_DELTA + 2;
memcpy(m->m_data + TCPIPHDR_DELTA + 2, pkt, pkt_len);
m->m_data += TCPIPHDR_DELTA + 2 + ETH_HLEN;
m->m_len -= TCPIPHDR_DELTA + 2 + ETH_HLEN;
if (proto == ETH_P_IP) {
ip_input(m);
} else if (proto == ETH_P_IPV6) {
ip6_input(m);
}
break;
case ETH_P_NCSI:
ncsi_input(slirp, pkt, pkt_len);
break;
default:
break;
}
}
/* Prepare the IPv4 packet to be sent to the ethernet device. Returns 1 if no
* packet should be sent, 0 if the packet must be re-queued, 2 if the packet
* is ready to go.
*/
static int if_encap4(Slirp *slirp, struct mbuf *ifm, struct ethhdr *eh,
uint8_t ethaddr[ETH_ALEN])
{
const struct ip *iph = (const struct ip *)ifm->m_data;
if (iph->ip_dst.s_addr == 0) {
/* 0.0.0.0 can not be a destination address, something went wrong,
* avoid making it worse */
return 1;
}
if (!arp_table_search(slirp, iph->ip_dst.s_addr, ethaddr)) {
uint8_t arp_req[ETH_HLEN + sizeof(struct slirp_arphdr)];
struct ethhdr *reh = (struct ethhdr *)arp_req;
struct slirp_arphdr *rah = (struct slirp_arphdr *)(arp_req + ETH_HLEN);
if (!ifm->resolution_requested) {
/* If the client addr is not known, send an ARP request */
memset(reh->h_dest, 0xff, ETH_ALEN);
memcpy(reh->h_source, special_ethaddr, ETH_ALEN - 4);
memcpy(&reh->h_source[2], &slirp->vhost_addr, 4);
reh->h_proto = htons(ETH_P_ARP);
rah->ar_hrd = htons(1);
rah->ar_pro = htons(ETH_P_IP);
rah->ar_hln = ETH_ALEN;
rah->ar_pln = 4;
rah->ar_op = htons(ARPOP_REQUEST);
/* source hw addr */
memcpy(rah->ar_sha, special_ethaddr, ETH_ALEN - 4);
memcpy(&rah->ar_sha[2], &slirp->vhost_addr, 4);
/* source IP */
rah->ar_sip = slirp->vhost_addr.s_addr;
/* target hw addr (none) */
memset(rah->ar_tha, 0, ETH_ALEN);
/* target IP */
rah->ar_tip = iph->ip_dst.s_addr;
slirp->client_ipaddr = iph->ip_dst;
slirp_output(slirp->opaque, arp_req, sizeof(arp_req));
ifm->resolution_requested = true;
/* Expire request and drop outgoing packet after 1 second */
ifm->expiration_date = qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + 1000000000ULL;
}
return 0;
} else {
memcpy(eh->h_source, special_ethaddr, ETH_ALEN - 4);
/* XXX: not correct */
memcpy(&eh->h_source[2], &slirp->vhost_addr, 4);
eh->h_proto = htons(ETH_P_IP);
/* Send this */
return 2;
}
}
/* Prepare the IPv6 packet to be sent to the ethernet device. Returns 1 if no
* packet should be sent, 0 if the packet must be re-queued, 2 if the packet
* is ready to go.
*/
static int if_encap6(Slirp *slirp, struct mbuf *ifm, struct ethhdr *eh,
uint8_t ethaddr[ETH_ALEN])
{
const struct ip6 *ip6h = mtod(ifm, const struct ip6 *);
if (!ndp_table_search(slirp, ip6h->ip_dst, ethaddr)) {
if (!ifm->resolution_requested) {
ndp_send_ns(slirp, ip6h->ip_dst);
ifm->resolution_requested = true;
ifm->expiration_date =
qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + 1000000000ULL;
}
return 0;
} else {
eh->h_proto = htons(ETH_P_IPV6);
in6_compute_ethaddr(ip6h->ip_src, eh->h_source);
/* Send this */
return 2;
}
}
/* Output the IP packet to the ethernet device. Returns 0 if the packet must be
* re-queued.
*/
int if_encap(Slirp *slirp, struct mbuf *ifm)
{
uint8_t buf[1600];
struct ethhdr *eh = (struct ethhdr *)buf;
uint8_t ethaddr[ETH_ALEN];
const struct ip *iph = (const struct ip *)ifm->m_data;
int ret;
if (ifm->m_len + ETH_HLEN > sizeof(buf)) {
return 1;
}
switch (iph->ip_v) {
case IPVERSION:
ret = if_encap4(slirp, ifm, eh, ethaddr);
if (ret < 2) {
return ret;
}
break;
case IP6VERSION:
ret = if_encap6(slirp, ifm, eh, ethaddr);
if (ret < 2) {
return ret;
}
break;
default:
g_assert_not_reached();
break;
}
memcpy(eh->h_dest, ethaddr, ETH_ALEN);
DEBUG_ARGS((dfd, " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
eh->h_source[0], eh->h_source[1], eh->h_source[2],
eh->h_source[3], eh->h_source[4], eh->h_source[5]));
DEBUG_ARGS((dfd, " dst = %02x:%02x:%02x:%02x:%02x:%02x\n",
eh->h_dest[0], eh->h_dest[1], eh->h_dest[2],
eh->h_dest[3], eh->h_dest[4], eh->h_dest[5]));
memcpy(buf + sizeof(struct ethhdr), ifm->m_data, ifm->m_len);
slirp_output(slirp->opaque, buf, ifm->m_len + ETH_HLEN);
return 1;
}
/* Drop host forwarding rule, return 0 if found. */
int slirp_remove_hostfwd(Slirp *slirp, int is_udp, struct in_addr host_addr,
int host_port)
{
struct socket *so;
struct socket *head = (is_udp ? &slirp->udb : &slirp->tcb);
struct sockaddr_in addr;
int port = htons(host_port);
socklen_t addr_len;
for (so = head->so_next; so != head; so = so->so_next) {
addr_len = sizeof(addr);
if ((so->so_state & SS_HOSTFWD) &&
getsockname(so->s, (struct sockaddr *)&addr, &addr_len) == 0 &&
addr.sin_addr.s_addr == host_addr.s_addr &&
addr.sin_port == port) {
close(so->s);
sofree(so);
return 0;
}
}
return -1;
}
int slirp_add_hostfwd(Slirp *slirp, int is_udp, struct in_addr host_addr,
int host_port, struct in_addr guest_addr, int guest_port)
{
if (!guest_addr.s_addr) {
guest_addr = slirp->vdhcp_startaddr;
}
if (is_udp) {
if (!udp_listen(slirp, host_addr.s_addr, htons(host_port),
guest_addr.s_addr, htons(guest_port), SS_HOSTFWD))
return -1;
} else {
if (!tcp_listen(slirp, host_addr.s_addr, htons(host_port),
guest_addr.s_addr, htons(guest_port), SS_HOSTFWD))
return -1;
}
return 0;
}
int slirp_add_exec(Slirp *slirp, int do_pty, const void *args,
struct in_addr *guest_addr, int guest_port)
{
if (!guest_addr->s_addr) {
guest_addr->s_addr = slirp->vnetwork_addr.s_addr |
(htonl(0x0204) & ~slirp->vnetwork_mask.s_addr);
}
if ((guest_addr->s_addr & slirp->vnetwork_mask.s_addr) !=
slirp->vnetwork_addr.s_addr ||
guest_addr->s_addr == slirp->vhost_addr.s_addr ||
guest_addr->s_addr == slirp->vnameserver_addr.s_addr) {
return -1;
}
return add_exec(&slirp->exec_list, do_pty, (char *)args, *guest_addr,
htons(guest_port));
}
ssize_t slirp_send(struct socket *so, const void *buf, size_t len, int flags)
{
if (so->s == -1 && so->extra) {
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(so->extra, buf, len);
return len;
}
return send(so->s, buf, len, flags);
}
static struct socket *
slirp_find_ctl_socket(Slirp *slirp, struct in_addr guest_addr, int guest_port)
{
struct socket *so;
for (so = slirp->tcb.so_next; so != &slirp->tcb; so = so->so_next) {
if (so->so_faddr.s_addr == guest_addr.s_addr &&
htons(so->so_fport) == guest_port) {
return so;
}
}
return NULL;
}
size_t slirp_socket_can_recv(Slirp *slirp, struct in_addr guest_addr,
int guest_port)
{
struct iovec iov[2];
struct socket *so;
so = slirp_find_ctl_socket(slirp, guest_addr, guest_port);
if (!so || so->so_state & SS_NOFDREF) {
return 0;
}
if (!CONN_CANFRCV(so) || so->so_snd.sb_cc >= (so->so_snd.sb_datalen/2)) {
return 0;
}
return sopreprbuf(so, iov, NULL);
}
void slirp_socket_recv(Slirp *slirp, struct in_addr guest_addr, int guest_port,
const uint8_t *buf, int size)
{
int ret;
struct socket *so = slirp_find_ctl_socket(slirp, guest_addr, guest_port);
if (!so)
return;
ret = soreadbuf(so, (const char *)buf, size);
if (ret > 0)
tcp_output(sototcpcb(so));
}
static int slirp_tcp_post_load(void *opaque, int version)
{
tcp_template((struct tcpcb *)opaque);
return 0;
}
static const VMStateDescription vmstate_slirp_tcp = {
.name = "slirp-tcp",
.version_id = 0,
.post_load = slirp_tcp_post_load,
.fields = (VMStateField[]) {
VMSTATE_INT16(t_state, struct tcpcb),
VMSTATE_INT16_ARRAY(t_timer, struct tcpcb, TCPT_NTIMERS),
VMSTATE_INT16(t_rxtshift, struct tcpcb),
VMSTATE_INT16(t_rxtcur, struct tcpcb),
VMSTATE_INT16(t_dupacks, struct tcpcb),
VMSTATE_UINT16(t_maxseg, struct tcpcb),
VMSTATE_UINT8(t_force, struct tcpcb),
VMSTATE_UINT16(t_flags, struct tcpcb),
VMSTATE_UINT32(snd_una, struct tcpcb),
VMSTATE_UINT32(snd_nxt, struct tcpcb),
VMSTATE_UINT32(snd_up, struct tcpcb),
VMSTATE_UINT32(snd_wl1, struct tcpcb),
VMSTATE_UINT32(snd_wl2, struct tcpcb),
VMSTATE_UINT32(iss, struct tcpcb),
VMSTATE_UINT32(snd_wnd, struct tcpcb),
VMSTATE_UINT32(rcv_wnd, struct tcpcb),
VMSTATE_UINT32(rcv_nxt, struct tcpcb),
VMSTATE_UINT32(rcv_up, struct tcpcb),
VMSTATE_UINT32(irs, struct tcpcb),
VMSTATE_UINT32(rcv_adv, struct tcpcb),
VMSTATE_UINT32(snd_max, struct tcpcb),
VMSTATE_UINT32(snd_cwnd, struct tcpcb),
VMSTATE_UINT32(snd_ssthresh, struct tcpcb),
VMSTATE_INT16(t_idle, struct tcpcb),
VMSTATE_INT16(t_rtt, struct tcpcb),
VMSTATE_UINT32(t_rtseq, struct tcpcb),
VMSTATE_INT16(t_srtt, struct tcpcb),
VMSTATE_INT16(t_rttvar, struct tcpcb),
VMSTATE_UINT16(t_rttmin, struct tcpcb),
VMSTATE_UINT32(max_sndwnd, struct tcpcb),
VMSTATE_UINT8(t_oobflags, struct tcpcb),
VMSTATE_UINT8(t_iobc, struct tcpcb),
VMSTATE_INT16(t_softerror, struct tcpcb),
VMSTATE_UINT8(snd_scale, struct tcpcb),
VMSTATE_UINT8(rcv_scale, struct tcpcb),
VMSTATE_UINT8(request_r_scale, struct tcpcb),
VMSTATE_UINT8(requested_s_scale, struct tcpcb),
VMSTATE_UINT32(ts_recent, struct tcpcb),
VMSTATE_UINT32(ts_recent_age, struct tcpcb),
VMSTATE_UINT32(last_ack_sent, struct tcpcb),
VMSTATE_END_OF_LIST()
}
};
/* The sbuf has a pair of pointers that are migrated as offsets;
* we calculate the offsets and restore the pointers using
* pre_save/post_load on a tmp structure.
*/
struct sbuf_tmp {
struct sbuf *parent;
uint32_t roff, woff;
};
static void sbuf_tmp_pre_save(void *opaque)
{
struct sbuf_tmp *tmp = opaque;
tmp->woff = tmp->parent->sb_wptr - tmp->parent->sb_data;
tmp->roff = tmp->parent->sb_rptr - tmp->parent->sb_data;
}
static int sbuf_tmp_post_load(void *opaque, int version)
{
struct sbuf_tmp *tmp = opaque;
uint32_t requested_len = tmp->parent->sb_datalen;
/* Allocate the buffer space used by the field after the tmp */
sbreserve(tmp->parent, tmp->parent->sb_datalen);
if (tmp->parent->sb_datalen != requested_len) {
return -ENOMEM;
}
if (tmp->woff >= requested_len ||
tmp->roff >= requested_len) {
error_report("invalid sbuf offsets r/w=%u/%u len=%u",
tmp->roff, tmp->woff, requested_len);
return -EINVAL;
}
tmp->parent->sb_wptr = tmp->parent->sb_data + tmp->woff;
tmp->parent->sb_rptr = tmp->parent->sb_data + tmp->roff;
return 0;
}
static const VMStateDescription vmstate_slirp_sbuf_tmp = {
.name = "slirp-sbuf-tmp",
.post_load = sbuf_tmp_post_load,
.pre_save = sbuf_tmp_pre_save,
.version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT32(woff, struct sbuf_tmp),
VMSTATE_UINT32(roff, struct sbuf_tmp),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_slirp_sbuf = {
.name = "slirp-sbuf",
.version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT32(sb_cc, struct sbuf),
VMSTATE_UINT32(sb_datalen, struct sbuf),
VMSTATE_WITH_TMP(struct sbuf, struct sbuf_tmp, vmstate_slirp_sbuf_tmp),
VMSTATE_VBUFFER_UINT32(sb_data, struct sbuf, 0, NULL, sb_datalen),
VMSTATE_END_OF_LIST()
}
};
static bool slirp_older_than_v4(void *opaque, int version_id)
{
return version_id < 4;
}
static bool slirp_family_inet(void *opaque, int version_id)
{
union slirp_sockaddr *ssa = (union slirp_sockaddr *)opaque;
return ssa->ss.ss_family == AF_INET;
}
static int slirp_socket_pre_load(void *opaque)
{
struct socket *so = opaque;
if (tcp_attach(so) < 0) {
return -ENOMEM;
}
/* Older versions don't load these fields */
so->so_ffamily = AF_INET;
so->so_lfamily = AF_INET;
return 0;
}
#ifndef _WIN32
#define VMSTATE_SIN4_ADDR(f, s, t) VMSTATE_UINT32_TEST(f, s, t)
#else
/* Win uses u_long rather than uint32_t - but it's still 32bits long */
#define VMSTATE_SIN4_ADDR(f, s, t) VMSTATE_SINGLE_TEST(f, s, t, 0, \
vmstate_info_uint32, u_long)
#endif
/* The OS provided ss_family field isn't that portable; it's size
* and type varies (16/8 bit, signed, unsigned)
* and the values it contains aren't fully portable.
*/
typedef struct SS_FamilyTmpStruct {
union slirp_sockaddr *parent;
uint16_t portable_family;
} SS_FamilyTmpStruct;
#define SS_FAMILY_MIG_IPV4 2 /* Linux, BSD, Win... */
#define SS_FAMILY_MIG_IPV6 10 /* Linux */
#define SS_FAMILY_MIG_OTHER 0xffff
static void ss_family_pre_save(void *opaque)
{
SS_FamilyTmpStruct *tss = opaque;
tss->portable_family = SS_FAMILY_MIG_OTHER;
if (tss->parent->ss.ss_family == AF_INET) {
tss->portable_family = SS_FAMILY_MIG_IPV4;
} else if (tss->parent->ss.ss_family == AF_INET6) {
tss->portable_family = SS_FAMILY_MIG_IPV6;
}
}
static int ss_family_post_load(void *opaque, int version_id)
{
SS_FamilyTmpStruct *tss = opaque;
switch (tss->portable_family) {
case SS_FAMILY_MIG_IPV4:
tss->parent->ss.ss_family = AF_INET;
break;
case SS_FAMILY_MIG_IPV6:
case 23: /* compatibility: AF_INET6 from mingw */
case 28: /* compatibility: AF_INET6 from FreeBSD sys/socket.h */
tss->parent->ss.ss_family = AF_INET6;
break;
default:
error_report("invalid ss_family type %x", tss->portable_family);
return -EINVAL;
}
return 0;
}
static const VMStateDescription vmstate_slirp_ss_family = {
.name = "slirp-socket-addr/ss_family",
.pre_save = ss_family_pre_save,
.post_load = ss_family_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT16(portable_family, SS_FamilyTmpStruct),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_slirp_socket_addr = {
.name = "slirp-socket-addr",
.version_id = 4,
.fields = (VMStateField[]) {
VMSTATE_WITH_TMP(union slirp_sockaddr, SS_FamilyTmpStruct,
vmstate_slirp_ss_family),
VMSTATE_SIN4_ADDR(sin.sin_addr.s_addr, union slirp_sockaddr,
slirp_family_inet),
VMSTATE_UINT16_TEST(sin.sin_port, union slirp_sockaddr,
slirp_family_inet),
#if 0
/* Untested: Needs checking by someone with IPv6 test */
VMSTATE_BUFFER_TEST(sin6.sin6_addr, union slirp_sockaddr,
slirp_family_inet6),
VMSTATE_UINT16_TEST(sin6.sin6_port, union slirp_sockaddr,
slirp_family_inet6),
VMSTATE_UINT32_TEST(sin6.sin6_flowinfo, union slirp_sockaddr,
slirp_family_inet6),
VMSTATE_UINT32_TEST(sin6.sin6_scope_id, union slirp_sockaddr,
slirp_family_inet6),
#endif
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_slirp_socket = {
.name = "slirp-socket",
.version_id = 4,
.pre_load = slirp_socket_pre_load,
.fields = (VMStateField[]) {
VMSTATE_UINT32(so_urgc, struct socket),
/* Pre-v4 versions */
VMSTATE_SIN4_ADDR(so_faddr.s_addr, struct socket,
slirp_older_than_v4),
VMSTATE_SIN4_ADDR(so_laddr.s_addr, struct socket,
slirp_older_than_v4),
VMSTATE_UINT16_TEST(so_fport, struct socket, slirp_older_than_v4),
VMSTATE_UINT16_TEST(so_lport, struct socket, slirp_older_than_v4),
/* v4 and newer */
VMSTATE_STRUCT(fhost, struct socket, 4, vmstate_slirp_socket_addr,
union slirp_sockaddr),
VMSTATE_STRUCT(lhost, struct socket, 4, vmstate_slirp_socket_addr,
union slirp_sockaddr),
VMSTATE_UINT8(so_iptos, struct socket),
VMSTATE_UINT8(so_emu, struct socket),
VMSTATE_UINT8(so_type, struct socket),
VMSTATE_INT32(so_state, struct socket),
VMSTATE_STRUCT(so_rcv, struct socket, 0, vmstate_slirp_sbuf,
struct sbuf),
VMSTATE_STRUCT(so_snd, struct socket, 0, vmstate_slirp_sbuf,
struct sbuf),
VMSTATE_STRUCT_POINTER(so_tcpcb, struct socket, vmstate_slirp_tcp,
struct tcpcb),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_slirp_bootp_client = {
.name = "slirp_bootpclient",
.fields = (VMStateField[]) {
VMSTATE_UINT16(allocated, BOOTPClient),
VMSTATE_BUFFER(macaddr, BOOTPClient),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_slirp = {
.name = "slirp",
.version_id = 4,
.fields = (VMStateField[]) {
VMSTATE_UINT16_V(ip_id, Slirp, 2),
VMSTATE_STRUCT_ARRAY(bootp_clients, Slirp, NB_BOOTP_CLIENTS, 3,
vmstate_slirp_bootp_client, BOOTPClient),
VMSTATE_END_OF_LIST()
}
};
static void slirp_state_save(QEMUFile *f, void *opaque)
{
Slirp *slirp = opaque;
struct ex_list *ex_ptr;
for (ex_ptr = slirp->exec_list; ex_ptr; ex_ptr = ex_ptr->ex_next)
if (ex_ptr->ex_pty == 3) {
struct socket *so;
so = slirp_find_ctl_socket(slirp, ex_ptr->ex_addr,
ntohs(ex_ptr->ex_fport));
if (!so)
continue;
qemu_put_byte(f, 42);
vmstate_save_state(f, &vmstate_slirp_socket, so, NULL);
}
qemu_put_byte(f, 0);
vmstate_save_state(f, &vmstate_slirp, slirp, NULL);
}
static int slirp_state_load(QEMUFile *f, void *opaque, int version_id)
{
Slirp *slirp = opaque;
struct ex_list *ex_ptr;
while (qemu_get_byte(f)) {
int ret;
struct socket *so = socreate(slirp);
if (!so)
return -ENOMEM;
ret = vmstate_load_state(f, &vmstate_slirp_socket, so, version_id);
if (ret < 0)
return ret;
if ((so->so_faddr.s_addr & slirp->vnetwork_mask.s_addr) !=
slirp->vnetwork_addr.s_addr) {
return -EINVAL;
}
for (ex_ptr = slirp->exec_list; ex_ptr; ex_ptr = ex_ptr->ex_next) {
if (ex_ptr->ex_pty == 3 &&
so->so_faddr.s_addr == ex_ptr->ex_addr.s_addr &&
so->so_fport == ex_ptr->ex_fport) {
break;
}
}
if (!ex_ptr)
return -EINVAL;
so->extra = (void *)ex_ptr->ex_exec;
}
return vmstate_load_state(f, &vmstate_slirp, slirp, version_id);
}