xemu/.gitignore

/GNUmakefile
/build/
*.pyc
.sdk
.stgit-*
.git-submodule-status
cscope.*
tags
TAGS
GPATH
GRTAGS
GTAGS
*~
*.ast_raw
*.depend_raw
*.swp
*.patch
*.gcov
configure: add support for pseudo-"in source tree" builds Meson requires the build dir to be separate from the source tree. Many people are used to just running "./configure && make" though and the meson conversion breaks that. This introduces some backcompat support to make it appear as if an "in source tree" build is being done, but with the results in the "build/" directory. This allows "./configure && make" to work as it did historically, albeit with the output binaries staying under build/. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2020-08-21 12:22:04 +02:00			`/GNUmakefile`
			`/build/`
Add .pyc back to the .gitignore file Python still dumps its bytecode into the source directory, so we should continue to ignore the .pyc files. Fixes: 0e72b7df4d ("Simplify the .gitignore file") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200919101859.28739-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu> 2020-09-19 12:18:59 +02:00			`*.pyc`
qemu-ga: Add configure options to specify path to Windows/VSS SDK To enable VSS support in qemu-ga for Windows, header files included in VSS SDK are required. The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK" If the path is omitted, it tries to search the headers from default paths and VSS support is enabled only if the SDK is found. VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is specified. VSS SDK is available from: http://www.microsoft.com/en-us/download/details.aspx?id=23490 To cross-compile using mingw, you need to setup the SDK on Windows environments to extract headers. You can also extract the SDK headers on POSIX environments using scripts/extract-vss-headers and msitools. In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to specify path to Windows SDK, which may be used for native-compile of .tlb file of qemu-ga VSS provider. However, this is usually unnecessary because pre-compiled .tlb file is included. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> 2013-08-07 11:40:03 -04:00			`.sdk`
Extend gitignore (Jan Kiszka) Exclude objects in the root directory and temporary stgit files. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6401 c046a42c-6fe2-441c-8c8c-71466251a162 2009-01-22 17:15:25 +00:00			`.stgit-*`
build: automatically handle GIT submodule checkout for dtc Currently if DTC is required by configure and not available in the host OS install, we exit with an error message telling the user to checkout a git submodule or install the library. This introduces automatic handling of the git submodule checkout process and enables it for dtc. This only runs if building from GIT, so users of release tarballs still need the system library install. The current state of the git checkout is stashed in .git-submodule-status, and a helper program is used to determine if this state matches the desired submodule state. A dependency against 'Makefile' ensures that the submodule state is refreshed at the start of the build process Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170929101201.21039-2-berrange@redhat.com [ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ] [ kraxel: fix Makefile dependencies ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> [fixup] Makefile dep 2017-09-29 11:11:56 +01:00			`.git-submodule-status`
add cscope.* to .gitignore we have "make cscope", therefore that makes sense to have cscope.* in .gitignore. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> 2010-07-23 14:59:52 +09:00			`cscope.*`
.gitignore: ignore vi swap files and ctags files Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com> 2011-01-31 18:20:40 +03:00			`tags`
Add TAGS and *~ to .gitignore Add the etags output generated by "make TAGS" and editor backup files to .gitignore. This patch has previously appeared in my series of patches to add pSeries emulation support. However, it obviously has no real connection to that, and can be applied seperately. Please apply. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> 2011-02-24 16:34:59 +11:00			`TAGS`
Makefile: add GNU global tags support GNU Global is another tags engine which is more like cscope in being able to support finding both references and definitions. You will be un-surprised to know it also integrates well with Emacs. The main benefit of integrating it into find-src-path is it takes less time to rebuild the database from scratch when you have a lot of build directories under your source tree. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210114165730.31607-3-alex.bennee@linaro.org> 2021-01-14 16:57:20 +00:00			`GPATH`
			`GRTAGS`
			`GTAGS`
Add TAGS and *~ to .gitignore Add the etags output generated by "make TAGS" and editor backup files to .gitignore. This patch has previously appeared in my series of patches to add pSeries emulation support. However, it obviously has no real connection to that, and can be applied seperately. Please apply. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> 2011-02-24 16:34:59 +11:00			`*~`
coccinelle: ignore ASTs pre-parsed cached C files files generated using coccinelle tool: 'spatch --use-cache' Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170718045540.16322-2-f4bug@amsat.org> Signed-off-by: Richard Henderson <rth@twiddle.net> 2017-07-18 01:55:31 -03:00			`*.ast_raw`
			`*.depend_raw`
gitignore: Update with some filetypes Update .gitignore to ignore .swp and .patch files. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <79262dbe1f7888eb02e1911501eebafa6f2f6400.1616583806.git.viresh.kumar@linaro.org> Message-Id: <20210720232703.10650-2-alex.bennee@linaro.org> 2021-07-21 00:26:35 +01:00			`*.swp`
			`*.patch`
.gitignore: add .gcov pattern The gcovr tool is very messy and can leave a lot of crap in the source tree even when using build directories. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220204204335.1689602-5-alex.bennee@linaro.org> 2022-02-04 20:43:13 +00:00			`*.gcov`