xemu/block/copy-before-write.c

258 lines
7.6 KiB
C
Raw Normal View History

/*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
* copy-before-write filter driver
*
* The driver performs Copy-Before-Write (CBW) operation: it is injected above
* some node, and before each write it copies _old_ data to the target node.
*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
* Copyright (c) 2018-2021 Virtuozzo International GmbH.
*
* Author:
* Sementsov-Ogievskiy Vladimir <vsementsov@virtuozzo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "sysemu/block-backend.h"
#include "qemu/cutils.h"
#include "qapi/error.h"
#include "block/block_int.h"
#include "block/qdict.h"
#include "block/block-copy.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
#include "block/copy-before-write.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
typedef struct BDRVCopyBeforeWriteState {
BlockCopyState *bcs;
BdrvChild *target;
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
} BDRVCopyBeforeWriteState;
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static coroutine_fn int cbw_co_preadv(
block: use int64_t instead of uint64_t in driver read handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver read handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_preadv() in block/io.c, passes int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_load_vmstate() does bdrv_check_qiov_request(). do_perform_cow_read() has uint64_t argument. And a lot of things in qcow2 driver are uint64_t, so converting it is big job. But we must not work with requests that don't satisfy bdrv_check_qiov_request(), so let's just assert it here. Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done The only one such caller: QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1); ... ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0); in tests/unit/test-bdrv-drain.c, and it's OK obviously. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: fix typos] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 10:27:59 +00:00
BlockDriverState *bs, int64_t offset, int64_t bytes,
QEMUIOVector *qiov, BdrvRequestFlags flags)
{
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
uint64_t offset, uint64_t bytes, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
BDRVCopyBeforeWriteState *s = bs->opaque;
uint64_t off, end;
int64_t cluster_size = block_copy_cluster_size(s->bcs);
if (flags & BDRV_REQ_WRITE_UNCHANGED) {
return 0;
}
off = QEMU_ALIGN_DOWN(offset, cluster_size);
end = QEMU_ALIGN_UP(offset + bytes, cluster_size);
return block_copy(s->bcs, off, end - off, true);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static int coroutine_fn cbw_co_pdiscard(BlockDriverState *bs,
int64_t offset, int bytes)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, 0);
if (ret < 0) {
return ret;
}
return bdrv_co_pdiscard(bs->file, offset, bytes);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static int coroutine_fn cbw_co_pwrite_zeroes(BlockDriverState *bs,
block: use int64_t instead of int in driver write_zeroes handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write_zeroes handlers bytes parameter to int64_t. The only caller of all updated function is bdrv_co_do_pwrite_zeroes(). bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s max_write_zeroes is limited to INT_MAX. So, updated functions all are safe, they will not get "bytes" larger than before. Still, let's look through all updated functions, and add assertions to the ones which are actually unprepared to values larger than INT_MAX. For these drivers also set explicit max_pwrite_zeroes limit. Let's go: blkdebug: calculations can't overflow, thanks to bdrv_check_qiov_request() in generic layer. rule_check() and bdrv_co_pwrite_zeroes() both have 64bit argument. blklogwrites: pass to blk_log_writes_co_log() with 64bit argument. blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pwrite_zeroes() which is OK copy-before-write: Calls cbw_do_copy_before_write() and bdrv_co_pwrite_zeroes, both have 64bit argument. file-posix: both handler calls raw_do_pwrite_zeroes, which is updated. In raw_do_pwrite_zeroes() calculations are OK due to bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes which is uint64_t. Check also where that uint64_t gets handed: handle_aiocb_write_zeroes_block() passes a uint64_t[2] to ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate() which takes off_t (and we compile to always have 64-bit off_t), as does handle_aiocb_write_zeroes_unmap. All look safe. gluster: bytes go to GlusterAIOCB::size which is int64_t and to glfs_zerofill_async works with off_t. iscsi: Aha, here we deal with iscsi_writesame16_task() that has uint32_t num_blocks argument and iscsi_writesame16_task() has uint16_t argument. Make comments, add assertions and clarify max_pwrite_zeroes calculation. iscsi_allocmap_() functions already has int64_t argument is_byte_request_lun_aligned is simple to update, do it. mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t argument nbd: Aha, here we have protocol limitation, and NBDRequest::len is uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are OK for now. nvme: Again, protocol limitation. And no inherent limit for write-zeroes at all. But from code that calculates cdw12 it's obvious that we do have limit and alignment. Let's clarify it. Also, obviously the code is not prepared to handle bytes=0. Let's handle this case too. trace events already 64bit preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both 64bit. rbd: pass to qemu_rbd_start_co() which is 64bit. qcow2: offset + bytes and alignment still works good (thanks to bdrv_check_qiov_request()), so tail calculation is OK qcow2_subcluster_zeroize() has 64bit argument, should be OK trace events updated qed: qed_co_request wants int nb_sectors. Also in code we have size_t used for request length which may be 32bit. So, let's just keep INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and don't care. raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both 64bit. throttle: Both throttle_group_co_io_limits_intercept() and bdrv_co_pwrite_zeroes() are 64bit. vmdk: pass to vmdk_pwritev which is 64bit quorum: pass to quorum_co_pwritev() which is 64bit Hooray! At this point all block drivers are prepared to support 64bit write-zero requests, or have explicitly set max_pwrite_zeroes. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: use <= rather than < in assertions relying on max_pwrite_zeroes] Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 10:28:03 +00:00
int64_t offset, int64_t bytes, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static coroutine_fn int cbw_co_pwritev(BlockDriverState *bs,
block: use int64_t instead of uint64_t in driver write handlers We are generally moving to int64_t for both offset and bytes parameters on all io paths. Main motivation is realization of 64-bit write_zeroes operation for fast zeroing large disk chunks, up to the whole disk. We chose signed type, to be consistent with off_t (which is signed) and with possibility for signed return type (where negative value means error). So, convert driver write handlers parameters which are already 64bit to signed type. While being here, convert also flags parameter to be BdrvRequestFlags. Now let's consider all callers. Simple git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?' shows that's there three callers of driver function: bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to be non-negative. qcow2_save_vmstate() does bdrv_check_qiov_request(). Still, the functions may be called directly, not only by drv->... Let's check: git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \ awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \ while read func; do git grep "$func(" | \ grep -v "$func(BlockDriverState"; done shows several callers: qcow2: qcow2_co_truncate() write at most up to @offset, which is checked in generic qcow2_co_truncate() by bdrv_check_request(). qcow2_co_pwritev_compressed_task() pass the request (or part of the request) that already went through normal write path, so it should be OK qcow: qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch quorum: quorum_co_pwrite_zeroes() pass int64_t and int - OK throttle: throttle_co_pwritev_compressed() pass int64_t, it's updated by this patch vmdk: vmdk_co_pwritev_compressed() pass int64_t, it's updated by this patch Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-09-03 10:28:00 +00:00
int64_t offset,
int64_t bytes,
QEMUIOVector *qiov,
BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static int coroutine_fn cbw_co_flush(BlockDriverState *bs)
{
if (!bs->file) {
return 0;
}
return bdrv_co_flush(bs->file->bs);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static void cbw_refresh_filename(BlockDriverState *bs)
{
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
bs->file->bs->filename);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
static void cbw_child_perm(BlockDriverState *bs, BdrvChild *c,
BdrvChildRole role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
if (!(role & BDRV_CHILD_FILTERED)) {
/*
* Target child
*
* Share write to target (child_file), to not interfere
* with guest writes to its disk which may be in target backing chain.
* Can't resize during a backup block job because we check the size
* only upfront.
*/
*nshared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
*nperm = BLK_PERM_WRITE;
} else {
/* Source child */
bdrv_default_perms(bs, c, role, reopen_queue,
perm, shared, nperm, nshared);
if (!QLIST_EMPTY(&bs->parents)) {
if (perm & BLK_PERM_WRITE) {
*nperm = *nperm | BLK_PERM_CONSISTENT_READ;
}
*nshared &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
}
}
}
static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
BdrvDirtyBitmap *copy_bitmap;
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
false, errp);
if (!bs->file) {
return -EINVAL;
}
s->target = bdrv_open_child(NULL, options, "target", bs, &child_of_bds,
BDRV_CHILD_DATA, false, errp);
if (!s->target) {
return -EINVAL;
}
bs->total_sectors = bs->file->bs->total_sectors;
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
s->bcs = block_copy_state_new(bs->file, s->target, errp);
if (!s->bcs) {
error_prepend(errp, "Cannot create block-copy-state: ");
return -EINVAL;
}
copy_bitmap = block_copy_dirty_bitmap(s->bcs);
bdrv_set_dirty_bitmap(copy_bitmap, 0, bdrv_dirty_bitmap_size(copy_bitmap));
return 0;
}
static void cbw_close(BlockDriverState *bs)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
block_copy_state_free(s->bcs);
s->bcs = NULL;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
BlockDriver bdrv_cbw_filter = {
.format_name = "copy-before-write",
.instance_size = sizeof(BDRVCopyBeforeWriteState),
.bdrv_open = cbw_open,
.bdrv_close = cbw_close,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
.bdrv_co_preadv = cbw_co_preadv,
.bdrv_co_pwritev = cbw_co_pwritev,
.bdrv_co_pwrite_zeroes = cbw_co_pwrite_zeroes,
.bdrv_co_pdiscard = cbw_co_pdiscard,
.bdrv_co_flush = cbw_co_flush,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
.bdrv_refresh_filename = cbw_refresh_filename,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
.bdrv_child_perm = cbw_child_perm,
.is_filter = true,
};
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
BlockDriverState *target,
const char *filter_node_name,
BlockCopyState **bcs,
Error **errp)
{
ERRP_GUARD();
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
BDRVCopyBeforeWriteState *state;
BlockDriverState *top;
QDict *opts;
assert(source->total_sectors == target->total_sectors);
opts = qdict_new();
qdict_put_str(opts, "driver", "copy-before-write");
if (filter_node_name) {
qdict_put_str(opts, "node-name", filter_node_name);
}
qdict_put_str(opts, "file", bdrv_get_node_name(source));
qdict_put_str(opts, "target", bdrv_get_node_name(target));
top = bdrv_insert_node(source, opts, BDRV_O_RDWR, errp);
if (!top) {
return NULL;
}
state = top->opaque;
*bcs = state->bcs;
return top;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 08:38:27 +00:00
void bdrv_cbw_drop(BlockDriverState *bs)
{
bdrv_drop_filter(bs, &error_abort);
bdrv_unref(bs);
}
static void cbw_init(void)
{
bdrv_register(&bdrv_cbw_filter);
}
block_init(cbw_init);