xemu/hw/sparc/sun4m.c

1594 lines
48 KiB
C
Raw Normal View History

/*
* QEMU Sun4m & Sun4d & Sun4c System Emulator
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
2016-03-14 08:01:28 +00:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/sysbus.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
#include "hw/sparc/sun4m_iommu.h"
#include "hw/rtc/m48t59.h"
#include "migration/vmstate.h"
#include "hw/sparc/sparc32_dma.h"
#include "hw/block/fdc.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
#include "sysemu/sysemu.h"
#include "net/net.h"
#include "hw/boards.h"
#include "hw/scsi/esp.h"
#include "hw/nvram/sun_nvram.h"
#include "hw/qdev-properties.h"
#include "hw/nvram/chrp_nvram.h"
#include "hw/nvram/fw_cfg.h"
#include "hw/char/escc.h"
#include "hw/misc/empty_slot.h"
#include "hw/misc/unimp.h"
#include "hw/irq.h"
#include "hw/loader.h"
#include "elf.h"
#include "trace.h"
/*
* Sun4m architecture was used in the following machines:
*
* SPARCserver 6xxMP/xx
* SPARCclassic (SPARCclassic Server)(SPARCstation LC) (4/15),
* SPARCclassic X (4/10)
* SPARCstation LX/ZX (4/30)
* SPARCstation Voyager
* SPARCstation 10/xx, SPARCserver 10/xx
* SPARCstation 5, SPARCserver 5
* SPARCstation 20/xx, SPARCserver 20
* SPARCstation 4
*
* See for example: http://www.sunhelp.org/faq/sunref1.html
*/
#define KERNEL_LOAD_ADDR 0x00004000
#define CMDLINE_ADDR 0x007ff000
#define INITRD_LOAD_ADDR 0x00800000
#define PROM_SIZE_MAX (1 * MiB)
#define PROM_VADDR 0xffd00000
#define PROM_FILENAME "openbios-sparc32"
#define CFG_ADDR 0xd00000510ULL
#define FW_CFG_SUN4M_DEPTH (FW_CFG_ARCH_LOCAL + 0x00)
#define FW_CFG_SUN4M_WIDTH (FW_CFG_ARCH_LOCAL + 0x01)
#define FW_CFG_SUN4M_HEIGHT (FW_CFG_ARCH_LOCAL + 0x02)
#define MAX_CPUS 16
#define MAX_PILS 16
#define MAX_VSIMMS 4
#define ESCC_CLOCK 4915200
struct sun4m_hwdef {
hwaddr iommu_base, iommu_pad_base, iommu_pad_len, slavio_base;
hwaddr intctl_base, counter_base, nvram_base, ms_kb_base;
hwaddr serial_base, fd_base;
hwaddr afx_base, idreg_base, dma_base, esp_base, le_base;
hwaddr tcx_base, cs_base, apc_base, aux1_base, aux2_base;
hwaddr bpp_base, dbri_base, sx_base;
struct {
hwaddr reg_base, vram_base;
} vsimm[MAX_VSIMMS];
hwaddr ecc_base;
uint64_t max_mem;
uint32_t ecc_version;
uint32_t iommu_version;
uint16_t machine_id;
uint8_t nvram_machine_id;
};
const char *fw_cfg_arch_key_name(uint16_t key)
{
static const struct {
uint16_t key;
const char *name;
} fw_cfg_arch_wellknown_keys[] = {
{FW_CFG_SUN4M_DEPTH, "depth"},
{FW_CFG_SUN4M_WIDTH, "width"},
{FW_CFG_SUN4M_HEIGHT, "height"},
};
for (size_t i = 0; i < ARRAY_SIZE(fw_cfg_arch_wellknown_keys); i++) {
if (fw_cfg_arch_wellknown_keys[i].key == key) {
return fw_cfg_arch_wellknown_keys[i].name;
}
}
return NULL;
}
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
Error **errp)
{
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
}
static void nvram_init(Nvram *nvram, uint8_t *macaddr,
const char *cmdline, const char *boot_devices,
ram_addr_t RAM_size, uint32_t kernel_size,
int width, int height, int depth,
int nvram_machine_id, const char *arch)
{
unsigned int i;
int sysp_end;
uint8_t image[0x1ff0];
NvramClass *k = NVRAM_GET_CLASS(nvram);
memset(image, '\0', sizeof(image));
/* OpenBIOS nvram variables partition */
sysp_end = chrp_nvram_create_system_partition(image, 0);
/* Free space partition */
chrp_nvram_create_free_partition(&image[sysp_end], 0x1fd0 - sysp_end);
Sun_init_header((struct Sun_nvram *)&image[0x1fd8], macaddr,
nvram_machine_id);
for (i = 0; i < sizeof(image); i++) {
(k->write)(nvram, i, image[i]);
}
}
void cpu_check_irqs(CPUSPARCState *env)
{
CPUState *cs;
/* We should be holding the BQL before we mess with IRQs */
g_assert(qemu_mutex_iothread_locked());
if (env->pil_in && (env->interrupt_index == 0 ||
(env->interrupt_index & ~15) == TT_EXTINT)) {
unsigned int i;
for (i = 15; i > 0; i--) {
if (env->pil_in & (1 << i)) {
int old_interrupt = env->interrupt_index;
env->interrupt_index = TT_EXTINT | i;
if (old_interrupt != env->interrupt_index) {
cs = env_cpu(env);
trace_sun4m_cpu_interrupt(i);
cpu_interrupt(cs, CPU_INTERRUPT_HARD);
}
break;
}
}
} else if (!env->pil_in && (env->interrupt_index & ~15) == TT_EXTINT) {
cs = env_cpu(env);
trace_sun4m_cpu_reset_interrupt(env->interrupt_index & 15);
env->interrupt_index = 0;
cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
}
}
static void cpu_kick_irq(SPARCCPU *cpu)
{
CPUSPARCState *env = &cpu->env;
CPUState *cs = CPU(cpu);
cs->halted = 0;
cpu_check_irqs(env);
qemu_cpu_kick(cs);
}
static void cpu_set_irq(void *opaque, int irq, int level)
{
SPARCCPU *cpu = opaque;
CPUSPARCState *env = &cpu->env;
if (level) {
trace_sun4m_cpu_set_irq_raise(irq);
env->pil_in |= 1 << irq;
cpu_kick_irq(cpu);
} else {
trace_sun4m_cpu_set_irq_lower(irq);
env->pil_in &= ~(1 << irq);
cpu_check_irqs(env);
}
}
static void dummy_cpu_set_irq(void *opaque, int irq, int level)
{
}
static void main_cpu_reset(void *opaque)
{
SPARCCPU *cpu = opaque;
CPUState *cs = CPU(cpu);
cpu_reset(cs);
cs->halted = 0;
}
static void secondary_cpu_reset(void *opaque)
{
SPARCCPU *cpu = opaque;
CPUState *cs = CPU(cpu);
cpu_reset(cs);
cs->halted = 1;
}
static void cpu_halt_signal(void *opaque, int irq, int level)
{
if (level && current_cpu) {
cpu_interrupt(current_cpu, CPU_INTERRUPT_HALT);
}
}
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
{
return addr - 0xf0000000ULL;
}
static unsigned long sun4m_load_kernel(const char *kernel_filename,
const char *initrd_filename,
ram_addr_t RAM_size,
uint32_t *initrd_size)
{
int linux_boot;
unsigned int i;
long kernel_size;
uint8_t *ptr;
linux_boot = (kernel_filename != NULL);
kernel_size = 0;
if (linux_boot) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_size = load_elf(kernel_filename, NULL,
translate_kernel_address, NULL,
hw/core/loader: Let load_elf() populate a field with CPU-specific flags While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-26 22:55:04 +00:00
NULL, NULL, NULL, NULL, 1, EM_SPARC, 0, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR);
if (kernel_size < 0) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 08:43:12 +00:00
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd */
*initrd_size = 0;
if (initrd_filename) {
*initrd_size = load_image_targphys(initrd_filename,
INITRD_LOAD_ADDR,
RAM_size - INITRD_LOAD_ADDR);
if ((int)*initrd_size < 0) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 08:43:12 +00:00
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
}
if (*initrd_size > 0) {
for (i = 0; i < 64 * TARGET_PAGE_SIZE; i += TARGET_PAGE_SIZE) {
ptr = rom_ptr(KERNEL_LOAD_ADDR + i, 24);
if (ptr && ldl_p(ptr) == 0x48647253) { /* HdrS */
stl_p(ptr + 16, INITRD_LOAD_ADDR);
stl_p(ptr + 20, *initrd_size);
break;
}
}
}
}
return kernel_size;
}
static void *iommu_init(hwaddr addr, uint32_t version, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, TYPE_SUN4M_IOMMU);
qdev_prop_set_uint32(dev, "version", version);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, irq);
sysbus_mmio_map(s, 0, addr);
return s;
}
static void *sparc32_dma_init(hwaddr dma_base,
hwaddr esp_base, qemu_irq espdma_irq,
hwaddr le_base, qemu_irq ledma_irq)
{
DeviceState *dma;
ESPDMADeviceState *espdma;
LEDMADeviceState *ledma;
SysBusESPState *esp;
SysBusPCNetState *lance;
dma = qdev_create(NULL, TYPE_SPARC32_DMA);
qdev_init_nofail(dma);
sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, dma_base);
espdma = SPARC32_ESPDMA_DEVICE(object_resolve_path_component(
OBJECT(dma), "espdma"));
sysbus_connect_irq(SYS_BUS_DEVICE(espdma), 0, espdma_irq);
esp = ESP_STATE(object_resolve_path_component(OBJECT(espdma), "esp"));
sysbus_mmio_map(SYS_BUS_DEVICE(esp), 0, esp_base);
scsi_bus_legacy_handle_cmdline(&esp->esp.bus);
ledma = SPARC32_LEDMA_DEVICE(object_resolve_path_component(
OBJECT(dma), "ledma"));
sysbus_connect_irq(SYS_BUS_DEVICE(ledma), 0, ledma_irq);
lance = SYSBUS_PCNET(object_resolve_path_component(
OBJECT(ledma), "lance"));
sysbus_mmio_map(SYS_BUS_DEVICE(lance), 0, le_base);
return dma;
}
static DeviceState *slavio_intctl_init(hwaddr addr,
hwaddr addrg,
qemu_irq **parent_irq)
{
DeviceState *dev;
SysBusDevice *s;
unsigned int i, j;
dev = qdev_create(NULL, "slavio_intctl");
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
for (i = 0; i < MAX_CPUS; i++) {
for (j = 0; j < MAX_PILS; j++) {
sysbus_connect_irq(s, i * MAX_PILS + j, parent_irq[i][j]);
}
}
sysbus_mmio_map(s, 0, addrg);
for (i = 0; i < MAX_CPUS; i++) {
sysbus_mmio_map(s, i + 1, addr + i * TARGET_PAGE_SIZE);
}
return dev;
}
#define SYS_TIMER_OFFSET 0x10000ULL
#define CPU_TIMER_OFFSET(cpu) (0x1000ULL * cpu)
static void slavio_timer_init_all(hwaddr addr, qemu_irq master_irq,
qemu_irq *cpu_irqs, unsigned int num_cpus)
{
DeviceState *dev;
SysBusDevice *s;
unsigned int i;
dev = qdev_create(NULL, "slavio_timer");
qdev_prop_set_uint32(dev, "num_cpus", num_cpus);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, master_irq);
sysbus_mmio_map(s, 0, addr + SYS_TIMER_OFFSET);
for (i = 0; i < MAX_CPUS; i++) {
sysbus_mmio_map(s, i + 1, addr + (hwaddr)CPU_TIMER_OFFSET(i));
sysbus_connect_irq(s, i + 1, cpu_irqs[i]);
}
}
static qemu_irq slavio_system_powerdown;
static void slavio_powerdown_req(Notifier *n, void *opaque)
{
qemu_irq_raise(slavio_system_powerdown);
}
static Notifier slavio_system_powerdown_notifier = {
.notify = slavio_powerdown_req
};
#define MISC_LEDS 0x01600000
#define MISC_CFG 0x01800000
#define MISC_DIAG 0x01a00000
#define MISC_MDM 0x01b00000
#define MISC_SYS 0x01f00000
static void slavio_misc_init(hwaddr base,
hwaddr aux1_base,
hwaddr aux2_base, qemu_irq irq,
qemu_irq fdc_tc)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "slavio_misc");
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
if (base) {
/* 8 bit registers */
/* Slavio control */
sysbus_mmio_map(s, 0, base + MISC_CFG);
/* Diagnostics */
sysbus_mmio_map(s, 1, base + MISC_DIAG);
/* Modem control */
sysbus_mmio_map(s, 2, base + MISC_MDM);
/* 16 bit registers */
/* ss600mp diag LEDs */
sysbus_mmio_map(s, 3, base + MISC_LEDS);
/* 32 bit registers */
/* System control */
sysbus_mmio_map(s, 4, base + MISC_SYS);
}
if (aux1_base) {
/* AUX 1 (Misc System Functions) */
sysbus_mmio_map(s, 5, aux1_base);
}
if (aux2_base) {
/* AUX 2 (Software Powerdown Control) */
sysbus_mmio_map(s, 6, aux2_base);
}
sysbus_connect_irq(s, 0, irq);
sysbus_connect_irq(s, 1, fdc_tc);
slavio_system_powerdown = qdev_get_gpio_in(dev, 0);
qemu_register_powerdown_notifier(&slavio_system_powerdown_notifier);
}
static void ecc_init(hwaddr base, qemu_irq irq, uint32_t version)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "eccmemctl");
qdev_prop_set_uint32(dev, "version", version);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, irq);
sysbus_mmio_map(s, 0, base);
if (version == 0) { // SS-600MP only
sysbus_mmio_map(s, 1, base + 0x1000);
}
}
static void apc_init(hwaddr power_base, qemu_irq cpu_halt)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "apc");
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
/* Power management (APC) XXX: not a Slavio device */
sysbus_mmio_map(s, 0, power_base);
sysbus_connect_irq(s, 0, cpu_halt);
}
static void tcx_init(hwaddr addr, qemu_irq irq, int vram_size, int width,
int height, int depth)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "SUNW,tcx");
qdev_prop_set_uint32(dev, "vram_size", vram_size);
qdev_prop_set_uint16(dev, "width", width);
qdev_prop_set_uint16(dev, "height", height);
qdev_prop_set_uint16(dev, "depth", depth);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
/* 10/ROM : FCode ROM */
sysbus_mmio_map(s, 0, addr);
/* 2/STIP : Stipple */
sysbus_mmio_map(s, 1, addr + 0x04000000ULL);
/* 3/BLIT : Blitter */
sysbus_mmio_map(s, 2, addr + 0x06000000ULL);
/* 5/RSTIP : Raw Stipple */
sysbus_mmio_map(s, 3, addr + 0x0c000000ULL);
/* 6/RBLIT : Raw Blitter */
sysbus_mmio_map(s, 4, addr + 0x0e000000ULL);
/* 7/TEC : Transform Engine */
sysbus_mmio_map(s, 5, addr + 0x00700000ULL);
/* 8/CMAP : DAC */
sysbus_mmio_map(s, 6, addr + 0x00200000ULL);
/* 9/THC : */
if (depth == 8) {
sysbus_mmio_map(s, 7, addr + 0x00300000ULL);
} else {
sysbus_mmio_map(s, 7, addr + 0x00301000ULL);
}
/* 11/DHC : */
sysbus_mmio_map(s, 8, addr + 0x00240000ULL);
/* 12/ALT : */
sysbus_mmio_map(s, 9, addr + 0x00280000ULL);
/* 0/DFB8 : 8-bit plane */
sysbus_mmio_map(s, 10, addr + 0x00800000ULL);
/* 1/DFB24 : 24bit plane */
sysbus_mmio_map(s, 11, addr + 0x02000000ULL);
/* 4/RDFB32: Raw framebuffer. Control plane */
sysbus_mmio_map(s, 12, addr + 0x0a000000ULL);
/* 9/THC24bits : NetBSD writes here even with 8-bit display: dummy */
if (depth == 8) {
sysbus_mmio_map(s, 13, addr + 0x00301000ULL);
}
sysbus_connect_irq(s, 0, irq);
}
static void cg3_init(hwaddr addr, qemu_irq irq, int vram_size, int width,
int height, int depth)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "cgthree");
qdev_prop_set_uint32(dev, "vram-size", vram_size);
qdev_prop_set_uint16(dev, "width", width);
qdev_prop_set_uint16(dev, "height", height);
qdev_prop_set_uint16(dev, "depth", depth);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
/* FCode ROM */
sysbus_mmio_map(s, 0, addr);
/* DAC */
sysbus_mmio_map(s, 1, addr + 0x400000ULL);
/* 8-bit plane */
sysbus_mmio_map(s, 2, addr + 0x800000ULL);
sysbus_connect_irq(s, 0, irq);
}
/* NCR89C100/MACIO Internal ID register */
#define TYPE_MACIO_ID_REGISTER "macio_idreg"
static const uint8_t idreg_data[] = { 0xfe, 0x81, 0x01, 0x03 };
static void idreg_init(hwaddr addr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, TYPE_MACIO_ID_REGISTER);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, addr);
address_space_write_rom(&address_space_memory, addr,
MEMTXATTRS_UNSPECIFIED,
idreg_data, sizeof(idreg_data));
}
#define MACIO_ID_REGISTER(obj) \
OBJECT_CHECK(IDRegState, (obj), TYPE_MACIO_ID_REGISTER)
typedef struct IDRegState {
SysBusDevice parent_obj;
MemoryRegion mem;
} IDRegState;
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
static void idreg_realize(DeviceState *ds, Error **errp)
{
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
IDRegState *s = MACIO_ID_REGISTER(ds);
SysBusDevice *dev = SYS_BUS_DEVICE(ds);
Error *local_err = NULL;
memory_region_init_ram_nomigrate(&s->mem, OBJECT(ds), "sun4m.idreg",
sizeof(idreg_data), &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
vmstate_register_ram_global(&s->mem);
memory_region_set_readonly(&s->mem, true);
sysbus_init_mmio(dev, &s->mem);
}
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
static void idreg_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = idreg_realize;
}
static const TypeInfo idreg_info = {
.name = TYPE_MACIO_ID_REGISTER,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(IDRegState),
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
.class_init = idreg_class_init,
};
#define TYPE_TCX_AFX "tcx_afx"
#define TCX_AFX(obj) OBJECT_CHECK(AFXState, (obj), TYPE_TCX_AFX)
typedef struct AFXState {
SysBusDevice parent_obj;
MemoryRegion mem;
} AFXState;
/* SS-5 TCX AFX register */
static void afx_init(hwaddr addr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, TYPE_TCX_AFX);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, addr);
}
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
static void afx_realize(DeviceState *ds, Error **errp)
{
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
AFXState *s = TCX_AFX(ds);
SysBusDevice *dev = SYS_BUS_DEVICE(ds);
Error *local_err = NULL;
memory_region_init_ram_nomigrate(&s->mem, OBJECT(ds), "sun4m.afx", 4,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
vmstate_register_ram_global(&s->mem);
sysbus_init_mmio(dev, &s->mem);
}
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
static void afx_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = afx_realize;
}
static const TypeInfo afx_info = {
.name = TYPE_TCX_AFX,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AFXState),
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
.class_init = afx_class_init,
};
#define TYPE_OPENPROM "openprom"
#define OPENPROM(obj) OBJECT_CHECK(PROMState, (obj), TYPE_OPENPROM)
typedef struct PROMState {
SysBusDevice parent_obj;
MemoryRegion prom;
} PROMState;
/* Boot PROM (OpenBIOS) */
static uint64_t translate_prom_address(void *opaque, uint64_t addr)
{
hwaddr *base_addr = (hwaddr *)opaque;
return addr + *base_addr - PROM_VADDR;
}
static void prom_init(hwaddr addr, const char *bios_name)
{
DeviceState *dev;
SysBusDevice *s;
char *filename;
int ret;
dev = qdev_create(NULL, TYPE_OPENPROM);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, addr);
/* load boot prom */
if (bios_name == NULL) {
bios_name = PROM_FILENAME;
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
ret = load_elf(filename, NULL,
translate_prom_address, &addr, NULL,
hw/core/loader: Let load_elf() populate a field with CPU-specific flags While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-26 22:55:04 +00:00
NULL, NULL, NULL, 1, EM_SPARC, 0, 0);
if (ret < 0 || ret > PROM_SIZE_MAX) {
ret = load_image_targphys(filename, addr, PROM_SIZE_MAX);
}
g_free(filename);
} else {
ret = -1;
}
if (ret < 0 || ret > PROM_SIZE_MAX) {
hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Fabien Chouteau <chouteau@adacore.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-12-armbru@redhat.com>
2018-02-03 08:43:12 +00:00
error_report("could not load prom '%s'", bios_name);
exit(1);
}
}
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
static void prom_realize(DeviceState *ds, Error **errp)
{
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
PROMState *s = OPENPROM(ds);
SysBusDevice *dev = SYS_BUS_DEVICE(ds);
Error *local_err = NULL;
memory_region_init_ram_nomigrate(&s->prom, OBJECT(ds), "sun4m.prom",
PROM_SIZE_MAX, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
vmstate_register_ram_global(&s->prom);
memory_region_set_readonly(&s->prom, true);
sysbus_init_mmio(dev, &s->prom);
}
static Property prom_properties[] = {
{/* end of property list */},
};
static void prom_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
device_class_set_props(dc, prom_properties);
hw/sparc/sun4m: Fix problems with device introspection Several devices of the sun4m machines are using &error_fatal in their instance_init function and thus can cause QEMU to abort unexpectedly: $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'openprom'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.prom" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'macio_idreg'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-10 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.idreg" already registered, abort! Aborted (core dumped) $ echo "{'execute':'qmp_capabilities'}"\ "{'execute':'device-list-properties',"\ " 'arguments':{'typename':'tcx_afx'}}" \ | sparc-softmmu/qemu-system-sparc -M SS-5 -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 91, "minor": 11, "major": 2}, "package": "build-all"}, "capabilities": []}} {"return": {}} RAMBlock "sun4m.afx" already registered, abort! Aborted (core dumped) Fix the issues by converting the instance_init functions into realize() functions instead, which are allowed to fail (and not called during device introspection). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-04-05 10:43:03 +00:00
dc->realize = prom_realize;
}
static const TypeInfo prom_info = {
.name = TYPE_OPENPROM,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PROMState),
.class_init = prom_class_init,
};
#define TYPE_SUN4M_MEMORY "memory"
#define SUN4M_RAM(obj) OBJECT_CHECK(RamDevice, (obj), TYPE_SUN4M_MEMORY)
typedef struct RamDevice {
SysBusDevice parent_obj;
HostMemoryBackend *memdev;
} RamDevice;
/* System RAM */
static void ram_realize(DeviceState *dev, Error **errp)
{
RamDevice *d = SUN4M_RAM(dev);
MemoryRegion *ram = host_memory_backend_get_memory(d->memdev);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), ram);
}
static void ram_initfn(Object *obj)
{
RamDevice *d = SUN4M_RAM(obj);
object_property_add_link(obj, "memdev", TYPE_MEMORY_BACKEND,
(Object **)&d->memdev,
object_property_allow_set_link,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 15:29:22 +00:00
OBJ_PROP_LINK_STRONG);
object_property_set_description(obj, "memdev", "Set RAM backend"
"Valid value is ID of a hostmem backend");
}
static void ram_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = ram_realize;
}
static const TypeInfo ram_info = {
.name = TYPE_SUN4M_MEMORY,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(RamDevice),
.instance_init = ram_initfn,
.class_init = ram_class_init,
};
static void cpu_devinit(const char *cpu_type, unsigned int id,
uint64_t prom_addr, qemu_irq **cpu_irqs)
{
CPUState *cs;
SPARCCPU *cpu;
CPUSPARCState *env;
cpu = SPARC_CPU(cpu_create(cpu_type));
env = &cpu->env;
cpu_sparc_set_id(env, id);
if (id == 0) {
qemu_register_reset(main_cpu_reset, cpu);
} else {
qemu_register_reset(secondary_cpu_reset, cpu);
cs = CPU(cpu);
cs->halted = 1;
}
*cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);
env->prom_addr = prom_addr;
}
static void dummy_fdc_tc(void *opaque, int irq, int level)
{
}
static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
MachineState *machine)
{
DeviceState *slavio_intctl;
unsigned int i;
void *nvram;
qemu_irq *cpu_irqs[MAX_CPUS], slavio_irq[32], slavio_cpu_irq[MAX_CPUS];
qemu_irq fdc_tc;
unsigned long kernel_size;
uint32_t initrd_size;
DriveInfo *fd[MAX_FD];
FWCfgState *fw_cfg;
DeviceState *dev;
SysBusDevice *s;
unsigned int smp_cpus = machine->smp.cpus;
unsigned int max_cpus = machine->smp.max_cpus;
Object *ram_memdev = object_resolve_path_type(machine->ram_memdev_id,
TYPE_MEMORY_BACKEND, NULL);
if (machine->ram_size > hwdef->max_mem) {
error_report("Too much memory for this machine: %" PRId64 ","
" maximum %" PRId64,
machine->ram_size / MiB, hwdef->max_mem / MiB);
exit(1);
}
/* init CPUs */
for(i = 0; i < smp_cpus; i++) {
cpu_devinit(machine->cpu_type, i, hwdef->slavio_base, &cpu_irqs[i]);
}
for (i = smp_cpus; i < MAX_CPUS; i++)
cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);
/* Create and map RAM frontend */
dev = qdev_create(NULL, "memory");
object_property_set_link(OBJECT(dev), ram_memdev, "memdev", &error_fatal);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0);
/* models without ECC don't trap when missing ram is accessed */
if (!hwdef->ecc_base) {
empty_slot_init(machine->ram_size, hwdef->max_mem - machine->ram_size);
}
prom_init(hwdef->slavio_base, bios_name);
slavio_intctl = slavio_intctl_init(hwdef->intctl_base,
hwdef->intctl_base + 0x10000ULL,
cpu_irqs);
for (i = 0; i < 32; i++) {
slavio_irq[i] = qdev_get_gpio_in(slavio_intctl, i);
}
for (i = 0; i < MAX_CPUS; i++) {
slavio_cpu_irq[i] = qdev_get_gpio_in(slavio_intctl, 32 + i);
}
if (hwdef->idreg_base) {
idreg_init(hwdef->idreg_base);
}
if (hwdef->afx_base) {
afx_init(hwdef->afx_base);
}
iommu_init(hwdef->iommu_base, hwdef->iommu_version, slavio_irq[30]);
if (hwdef->iommu_pad_base) {
/* On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when does. Using empty_slot instead of aliasing can help with
debugging such accesses */
empty_slot_init(hwdef->iommu_pad_base,hwdef->iommu_pad_len);
}
sparc32_dma_init(hwdef->dma_base,
hwdef->esp_base, slavio_irq[18],
hwdef->le_base, slavio_irq[16]);
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit (1);
}
if (vga_interface_type != VGA_NONE) {
if (vga_interface_type == VGA_CG3) {
if (graphic_depth != 8) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768) &&
!(graphic_width == 1152 && graphic_height == 900)) {
error_report("Unsupported resolution: %d x %d", graphic_width,
graphic_height);
exit(1);
}
/* sbus irq 5 */
cg3_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
} else {
/* If no display specified, default to TCX */
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768)) {
error_report("Unsupported resolution: %d x %d",
graphic_width, graphic_height);
exit(1);
}
tcx_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
}
}
for (i = 0; i < MAX_VSIMMS; i++) {
/* vsimm registers probed by OBP */
if (hwdef->vsimm[i].reg_base) {
empty_slot_init(hwdef->vsimm[i].reg_base, 0x2000);
}
}
if (hwdef->sx_base) {
create_unimplemented_device("SUNW,sx", hwdef->sx_base, 0x2000);
}
nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0, 0x2000, 1968, 8);
slavio_timer_init_all(hwdef->counter_base, slavio_irq[19], slavio_cpu_irq, smp_cpus);
/* Slavio TTYA (base+4, Linux ttyS0) is the first QEMU serial device
Slavio TTYB (base+0, Linux ttyS1) is the second QEMU serial device */
dev = qdev_create(NULL, TYPE_ESCC);
qdev_prop_set_uint32(dev, "disabled", !machine->enable_graphics);
qdev_prop_set_uint32(dev, "frequency", ESCC_CLOCK);
qdev_prop_set_uint32(dev, "it_shift", 1);
qdev_prop_set_chr(dev, "chrB", NULL);
qdev_prop_set_chr(dev, "chrA", NULL);
qdev_prop_set_uint32(dev, "chnBtype", escc_mouse);
qdev_prop_set_uint32(dev, "chnAtype", escc_kbd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, slavio_irq[14]);
sysbus_connect_irq(s, 1, slavio_irq[14]);
sysbus_mmio_map(s, 0, hwdef->ms_kb_base);
dev = qdev_create(NULL, TYPE_ESCC);
qdev_prop_set_uint32(dev, "disabled", 0);
qdev_prop_set_uint32(dev, "frequency", ESCC_CLOCK);
qdev_prop_set_uint32(dev, "it_shift", 1);
qdev_prop_set_chr(dev, "chrB", serial_hd(1));
qdev_prop_set_chr(dev, "chrA", serial_hd(0));
qdev_prop_set_uint32(dev, "chnBtype", escc_serial);
qdev_prop_set_uint32(dev, "chnAtype", escc_serial);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, slavio_irq[15]);
sysbus_connect_irq(s, 1, slavio_irq[15]);
sysbus_mmio_map(s, 0, hwdef->serial_base);
if (hwdef->apc_base) {
apc_init(hwdef->apc_base, qemu_allocate_irq(cpu_halt_signal, NULL, 0));
}
if (hwdef->fd_base) {
/* there is zero or one floppy drive */
memset(fd, 0, sizeof(fd));
fd[0] = drive_get(IF_FLOPPY, 0, 0);
sun4m_fdctrl_init(slavio_irq[22], hwdef->fd_base, fd,
&fdc_tc);
} else {
fdc_tc = qemu_allocate_irq(dummy_fdc_tc, NULL, 0);
}
slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
slavio_irq[30], fdc_tc);
if (hwdef->cs_base) {
sysbus_create_simple("SUNW,CS4231", hwdef->cs_base,
slavio_irq[5]);
}
if (hwdef->dbri_base) {
/* ISDN chip with attached CS4215 audio codec */
/* prom space */
create_unimplemented_device("SUNW,DBRI.prom",
hwdef->dbri_base + 0x1000, 0x30);
/* reg space */
create_unimplemented_device("SUNW,DBRI",
hwdef->dbri_base + 0x10000, 0x100);
}
if (hwdef->bpp_base) {
/* parallel port */
create_unimplemented_device("SUNW,bpp", hwdef->bpp_base, 0x20);
}
initrd_size = 0;
kernel_size = sun4m_load_kernel(machine->kernel_filename,
machine->initrd_filename,
machine->ram_size, &initrd_size);
nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, machine->kernel_cmdline,
machine->boot_order, machine->ram_size, kernel_size,
graphic_width, graphic_height, graphic_depth,
hwdef->nvram_machine_id, "Sun4m");
if (hwdef->ecc_base)
ecc_init(hwdef->ecc_base, slavio_irq[28],
hwdef->ecc_version);
dev = qdev_create(NULL, TYPE_FW_CFG_MEM);
fw_cfg = FW_CFG(dev);
qdev_prop_set_uint32(dev, "data_width", 1);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 15:29:22 +00:00
OBJECT(fw_cfg));
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, CFG_ADDR);
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_DEPTH, graphic_depth);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_HEIGHT, graphic_height);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, KERNEL_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, INITRD_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
enum {
ss5_id = 32,
vger_id,
lx_id,
ss4_id,
scls_id,
sbook_id,
ss10_id = 64,
ss20_id,
ss600mp_id,
};
static const struct sun4m_hwdef sun4m_hwdefs[] = {
/* SS-5 */
{
.iommu_base = 0x10000000,
.iommu_pad_base = 0x10004000,
.iommu_pad_len = 0x0fffb000,
.tcx_base = 0x50000000,
.cs_base = 0x6c000000,
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.apc_base = 0x6a000000,
.afx_base = 0x6e000000,
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = ss5_id,
.iommu_version = 0x05000000,
.max_mem = 0x10000000,
},
/* SS-10 */
{
.iommu_base = 0xfe0000000ULL,
.tcx_base = 0xe20000000ULL,
.slavio_base = 0xff0000000ULL,
.ms_kb_base = 0xff1000000ULL,
.serial_base = 0xff1100000ULL,
.nvram_base = 0xff1200000ULL,
.fd_base = 0xff1700000ULL,
.counter_base = 0xff1300000ULL,
.intctl_base = 0xff1400000ULL,
.idreg_base = 0xef0000000ULL,
.dma_base = 0xef0400000ULL,
.esp_base = 0xef0800000ULL,
.le_base = 0xef0c00000ULL,
.apc_base = 0xefa000000ULL, // XXX should not exist
.aux1_base = 0xff1800000ULL,
.aux2_base = 0xff1a01000ULL,
.ecc_base = 0xf00000000ULL,
.ecc_version = 0x10000000, // version 0, implementation 1
.nvram_machine_id = 0x72,
.machine_id = ss10_id,
.iommu_version = 0x03000000,
.max_mem = 0xf00000000ULL,
},
/* SS-600MP */
{
.iommu_base = 0xfe0000000ULL,
.tcx_base = 0xe20000000ULL,
.slavio_base = 0xff0000000ULL,
.ms_kb_base = 0xff1000000ULL,
.serial_base = 0xff1100000ULL,
.nvram_base = 0xff1200000ULL,
.counter_base = 0xff1300000ULL,
.intctl_base = 0xff1400000ULL,
.dma_base = 0xef0081000ULL,
.esp_base = 0xef0080000ULL,
.le_base = 0xef0060000ULL,
.apc_base = 0xefa000000ULL, // XXX should not exist
.aux1_base = 0xff1800000ULL,
.aux2_base = 0xff1a01000ULL, // XXX should not exist
.ecc_base = 0xf00000000ULL,
.ecc_version = 0x00000000, // version 0, implementation 0
.nvram_machine_id = 0x71,
.machine_id = ss600mp_id,
.iommu_version = 0x01000000,
.max_mem = 0xf00000000ULL,
},
/* SS-20 */
{
.iommu_base = 0xfe0000000ULL,
.tcx_base = 0xe20000000ULL,
.slavio_base = 0xff0000000ULL,
.ms_kb_base = 0xff1000000ULL,
.serial_base = 0xff1100000ULL,
.nvram_base = 0xff1200000ULL,
.fd_base = 0xff1700000ULL,
.counter_base = 0xff1300000ULL,
.intctl_base = 0xff1400000ULL,
.idreg_base = 0xef0000000ULL,
.dma_base = 0xef0400000ULL,
.esp_base = 0xef0800000ULL,
.le_base = 0xef0c00000ULL,
.bpp_base = 0xef4800000ULL,
.apc_base = 0xefa000000ULL, // XXX should not exist
.aux1_base = 0xff1800000ULL,
.aux2_base = 0xff1a01000ULL,
.dbri_base = 0xee0000000ULL,
.sx_base = 0xf80000000ULL,
.vsimm = {
{
.reg_base = 0x9c000000ULL,
.vram_base = 0xfc000000ULL
}, {
.reg_base = 0x90000000ULL,
.vram_base = 0xf0000000ULL
}, {
.reg_base = 0x94000000ULL
}, {
.reg_base = 0x98000000ULL
}
},
.ecc_base = 0xf00000000ULL,
.ecc_version = 0x20000000, // version 0, implementation 2
.nvram_machine_id = 0x72,
.machine_id = ss20_id,
.iommu_version = 0x13000000,
.max_mem = 0xf00000000ULL,
},
/* Voyager */
{
.iommu_base = 0x10000000,
.tcx_base = 0x50000000,
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.apc_base = 0x71300000, // pmc
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = vger_id,
.iommu_version = 0x05000000,
.max_mem = 0x10000000,
},
/* LX */
{
.iommu_base = 0x10000000,
.iommu_pad_base = 0x10004000,
.iommu_pad_len = 0x0fffb000,
.tcx_base = 0x50000000,
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = lx_id,
.iommu_version = 0x04000000,
.max_mem = 0x10000000,
},
/* SS-4 */
{
.iommu_base = 0x10000000,
.tcx_base = 0x50000000,
.cs_base = 0x6c000000,
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.apc_base = 0x6a000000,
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = ss4_id,
.iommu_version = 0x05000000,
.max_mem = 0x10000000,
},
/* SPARCClassic */
{
.iommu_base = 0x10000000,
.tcx_base = 0x50000000,
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.apc_base = 0x6a000000,
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = scls_id,
.iommu_version = 0x05000000,
.max_mem = 0x10000000,
},
/* SPARCbook */
{
.iommu_base = 0x10000000,
.tcx_base = 0x50000000, // XXX
.slavio_base = 0x70000000,
.ms_kb_base = 0x71000000,
.serial_base = 0x71100000,
.nvram_base = 0x71200000,
.fd_base = 0x71400000,
.counter_base = 0x71d00000,
.intctl_base = 0x71e00000,
.idreg_base = 0x78000000,
.dma_base = 0x78400000,
.esp_base = 0x78800000,
.le_base = 0x78c00000,
.apc_base = 0x6a000000,
.aux1_base = 0x71900000,
.aux2_base = 0x71910000,
.nvram_machine_id = 0x80,
.machine_id = sbook_id,
.iommu_version = 0x05000000,
.max_mem = 0x10000000,
},
};
/* SPARCstation 5 hardware initialisation */
static void ss5_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[0], machine);
}
/* SPARCstation 10 hardware initialisation */
static void ss10_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[1], machine);
}
/* SPARCserver 600MP hardware initialisation */
static void ss600mp_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[2], machine);
}
/* SPARCstation 20 hardware initialisation */
static void ss20_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[3], machine);
}
/* SPARCstation Voyager hardware initialisation */
static void vger_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[4], machine);
}
/* SPARCstation LX hardware initialisation */
static void ss_lx_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[5], machine);
}
/* SPARCstation 4 hardware initialisation */
static void ss4_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[6], machine);
}
/* SPARCClassic hardware initialisation */
static void scls_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[7], machine);
}
/* SPARCbook hardware initialisation */
static void sbook_init(MachineState *machine)
{
sun4m_hw_init(&sun4m_hwdefs[8], machine);
}
static void ss5_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation 5";
mc->init = ss5_init;
mc->block_default_type = IF_SCSI;
mc->is_default = true;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("Fujitsu-MB86904");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss5_type = {
.name = MACHINE_TYPE_NAME("SS-5"),
.parent = TYPE_MACHINE,
.class_init = ss5_class_init,
};
static void ss10_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation 10";
mc->init = ss10_init;
mc->block_default_type = IF_SCSI;
mc->max_cpus = 4;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-SuperSparc-II");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss10_type = {
.name = MACHINE_TYPE_NAME("SS-10"),
.parent = TYPE_MACHINE,
.class_init = ss10_class_init,
};
static void ss600mp_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCserver 600MP";
mc->init = ss600mp_init;
mc->block_default_type = IF_SCSI;
mc->max_cpus = 4;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-SuperSparc-II");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss600mp_type = {
.name = MACHINE_TYPE_NAME("SS-600MP"),
.parent = TYPE_MACHINE,
.class_init = ss600mp_class_init,
};
static void ss20_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation 20";
mc->init = ss20_init;
mc->block_default_type = IF_SCSI;
mc->max_cpus = 4;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-SuperSparc-II");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss20_type = {
.name = MACHINE_TYPE_NAME("SS-20"),
.parent = TYPE_MACHINE,
.class_init = ss20_class_init,
};
static void voyager_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation Voyager";
mc->init = vger_init;
mc->block_default_type = IF_SCSI;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("Fujitsu-MB86904");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo voyager_type = {
.name = MACHINE_TYPE_NAME("Voyager"),
.parent = TYPE_MACHINE,
.class_init = voyager_class_init,
};
static void ss_lx_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation LX";
mc->init = ss_lx_init;
mc->block_default_type = IF_SCSI;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-MicroSparc-I");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss_lx_type = {
.name = MACHINE_TYPE_NAME("LX"),
.parent = TYPE_MACHINE,
.class_init = ss_lx_class_init,
};
static void ss4_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCstation 4";
mc->init = ss4_init;
mc->block_default_type = IF_SCSI;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("Fujitsu-MB86904");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo ss4_type = {
.name = MACHINE_TYPE_NAME("SS-4"),
.parent = TYPE_MACHINE,
.class_init = ss4_class_init,
};
static void scls_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCClassic";
mc->init = scls_init;
mc->block_default_type = IF_SCSI;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-MicroSparc-I");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo scls_type = {
.name = MACHINE_TYPE_NAME("SPARCClassic"),
.parent = TYPE_MACHINE,
.class_init = scls_class_init,
};
static void sbook_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Sun4m platform, SPARCbook";
mc->init = sbook_init;
mc->block_default_type = IF_SCSI;
mc->default_boot_order = "c";
mc->default_cpu_type = SPARC_CPU_TYPE_NAME("TI-MicroSparc-I");
mc->default_display = "tcx";
mc->default_ram_id = "sun4m.ram";
}
static const TypeInfo sbook_type = {
.name = MACHINE_TYPE_NAME("SPARCbook"),
.parent = TYPE_MACHINE,
.class_init = sbook_class_init,
};
static void sun4m_register_types(void)
{
type_register_static(&idreg_info);
type_register_static(&afx_info);
type_register_static(&prom_info);
type_register_static(&ram_info);
type_register_static(&ss5_type);
type_register_static(&ss10_type);
type_register_static(&ss600mp_type);
type_register_static(&ss20_type);
type_register_static(&voyager_type);
type_register_static(&ss_lx_type);
type_register_static(&ss4_type);
type_register_static(&scls_type);
type_register_static(&sbook_type);
}
type_init(sun4m_register_types)