xemu/qapi/qapi-clone-visitor.c

205 lines
5.4 KiB
C
Raw Normal View History

qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
/*
* Copy one QAPI object to another
*
* Copyright (C) 2016 Red Hat, Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "qapi/clone-visitor.h"
#include "qapi/visitor-impl.h"
#include "qapi/error.h"
#include "qapi/qmp/qnull.h"
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
struct QapiCloneVisitor {
Visitor visitor;
size_t depth;
};
static QapiCloneVisitor *to_qcv(Visitor *v)
{
return container_of(v, QapiCloneVisitor, visitor);
}
static bool qapi_clone_start_struct(Visitor *v, const char *name, void **obj,
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
size_t size, Error **errp)
{
QapiCloneVisitor *qcv = to_qcv(v);
if (!obj) {
assert(qcv->depth);
/* Only possible when visiting an alternate's object
* branch. Nothing further to do here, since the earlier
* visit_start_alternate() already copied memory. */
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
*obj = g_memdup(*obj, size);
qcv->depth++;
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static void qapi_clone_end(Visitor *v, void **obj)
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
if (obj) {
qcv->depth--;
}
}
static bool qapi_clone_start_list(Visitor *v, const char *name,
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
GenericList **listp, size_t size,
Error **errp)
{
return qapi_clone_start_struct(v, name, (void **)listp, size, errp);
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static GenericList *qapi_clone_next_list(Visitor *v, GenericList *tail,
size_t size)
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/* Unshare the tail of the list cloned by g_memdup() */
tail->next = g_memdup(tail->next, size);
return tail->next;
}
static bool qapi_clone_start_alternate(Visitor *v, const char *name,
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
GenericAlternate **obj, size_t size,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
return qapi_clone_start_struct(v, name, (void **)obj, size, errp);
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_int64(Visitor *v, const char *name, int64_t *obj,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/* Value was already cloned by g_memdup() */
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_uint64(Visitor *v, const char *name,
uint64_t *obj, Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/* Value was already cloned by g_memdup() */
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_bool(Visitor *v, const char *name, bool *obj,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/* Value was already cloned by g_memdup() */
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_str(Visitor *v, const char *name, char **obj,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/*
* Pointer was already cloned by g_memdup; create fresh copy.
* Note that as long as qobject-output-visitor accepts NULL instead of
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
* "", then we must do likewise. However, we want to obey the
* input visitor semantics of never producing NULL when the empty
* string is intended.
*/
*obj = g_strdup(*obj ?: "");
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_number(Visitor *v, const char *name, double *obj,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
/* Value was already cloned by g_memdup() */
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static bool qapi_clone_type_null(Visitor *v, const char *name, QNull **obj,
Error **errp)
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
{
QapiCloneVisitor *qcv = to_qcv(v);
assert(qcv->depth);
*obj = qnull();
return true;
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
}
static void qapi_clone_free(Visitor *v)
{
g_free(v);
}
static Visitor *qapi_clone_visitor_new(void)
{
QapiCloneVisitor *v;
v = g_malloc0(sizeof(*v));
v->visitor.type = VISITOR_CLONE;
v->visitor.start_struct = qapi_clone_start_struct;
v->visitor.end_struct = qapi_clone_end;
v->visitor.start_list = qapi_clone_start_list;
v->visitor.next_list = qapi_clone_next_list;
v->visitor.end_list = qapi_clone_end;
v->visitor.start_alternate = qapi_clone_start_alternate;
v->visitor.end_alternate = qapi_clone_end;
v->visitor.type_int64 = qapi_clone_type_int64;
v->visitor.type_uint64 = qapi_clone_type_uint64;
v->visitor.type_bool = qapi_clone_type_bool;
v->visitor.type_str = qapi_clone_type_str;
v->visitor.type_number = qapi_clone_type_number;
v->visitor.type_null = qapi_clone_type_null;
v->visitor.free = qapi_clone_free;
return &v->visitor;
}
void *qapi_clone(const void *src, bool (*visit_type)(Visitor *, const char *,
qapi: Add new clone visitor We have a couple places in the code base that want to deep-clone one QAPI object into another, and they were resorting to serializing the struct out to QObject then reparsing it. A much more efficient version can be done by adding a new clone visitor. Since cloning is still relatively uncommon, expose the use of the new visitor via a QAPI_CLONE() macro that takes care of type-punning the underlying function pointer, rather than generating lots of unused functions for types that won't be cloned. And yes, we're relying on the compiler treating all pointers equally, even though a strict C program cannot portably do so - but we're not the first one in the qemu code base to expect it to work (hello, glib!). The choice of adding a fourth visitor type deserves some explanation. On the surface, the clone visitor is mostly an input visitor (it takes arbitrary input - in this case, another QAPI object - and creates a new QAPI object during the course of the visit). But ever since commit da72ab0 consolidated enum visits based on the visitor type, using VISITOR_INPUT would cause us to run visit_type_str(), even though for cloning there is nothing to do (we just copy the enum value across, without regards to its mapping to strings). Also, since our input happens to be a QAPI object, we can also satisfy the internal checks for VISITOR_OUTPUT. So in the end, I settled with a new VISITOR_CLONE, and chose its value such that many internal checks can use 'v->type & mask', sticking to 'v->type == value' where the difference matters. Note that we can only clone objects (including alternates) and lists, not built-ins or enums. The visitor core hides integer width from the actual visitor (since commit 04e070d), and as long as that's the case, we can't clone top-level integers. Then again, those can always be cloned by direct copy, since they are not objects with deep pointers, so it's no real loss. And restricting cloning to just objects and lists is cleaner than restricting it to non-integers. As such, I documented that the clone visitor is for direct use only by code internal to QAPI, and should not be used on incomplete objects (other than a hack to work around the fact that we allow NULL in place of "" in visit_type_str() in other output visitors). Note that as written, the clone visitor will never fail on a complete object. Scalars (including enums) not at the root of the clone copy just fine with no additional effort while visiting the scalar, by virtue of a g_memdup() each time we push another struct onto the stack. Cloning a string requires deduplication of a pointer, which means it can also provide the guarantee of an input visitor of never producing NULL even when still accepting NULL in place of "" the way the QMP output visitor does. Cloning an 'any' type could be possible by incrementing the QObject refcnt, but it's not obvious whether that is better than implementing a QObject deep clone. So for now, we document it as unsupported, and intentionally omit the .type_any() callback to let a developer know their usage needs implementation. Add testsuite coverage for several different clone situations, to ensure that the code is working. I also tested that valgrind was happy with the test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:44 +00:00
void **, Error **))
{
Visitor *v;
void *dst = (void *) src; /* Cast away const */
if (!src) {
return NULL;
}
v = qapi_clone_visitor_new();
visit_type(v, NULL, &dst, &error_abort);
visit_free(v);
return dst;
}
void qapi_clone_members(void *dst, const void *src, size_t sz,
bool (*visit_type_members)(Visitor *, void *,
Error **))
{
Visitor *v;
v = qapi_clone_visitor_new();
memcpy(dst, src, sz);
to_qcv(v)->depth++;
visit_type_members(v, dst, &error_abort);
visit_free(v);
}