xemu/hw/misc/tmp105.c

277 lines
7.0 KiB
C
Raw Normal View History

/*
* Texas Instruments TMP105 temperature sensor.
*
* Copyright (C) 2008 Nokia Corporation
* Written by Andrzej Zaborowski <andrew@openedhand.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 or
* (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "hw/i2c/i2c.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "tmp105.h"
2016-03-14 08:01:28 +00:00
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/module.h"
static void tmp105_interrupt_update(TMP105State *s)
{
qemu_set_irq(s->pin, s->alarm ^ ((~s->config >> 2) & 1)); /* POL */
}
static void tmp105_alarm_update(TMP105State *s)
{
if ((s->config >> 0) & 1) { /* SD */
if ((s->config >> 7) & 1) /* OS */
s->config &= ~(1 << 7); /* OS */
else
return;
}
if ((s->config >> 1) & 1) { /* TM */
if (s->temperature >= s->limit[1])
s->alarm = 1;
else if (s->temperature < s->limit[0])
s->alarm = 1;
} else {
if (s->temperature >= s->limit[1])
s->alarm = 1;
else if (s->temperature < s->limit[0])
s->alarm = 0;
}
tmp105_interrupt_update(s);
}
static void tmp105_get_temperature(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
TMP105State *s = TMP105(obj);
int64_t value = s->temperature * 1000 / 256;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 13:48:54 +00:00
visit_type_int(v, name, &value, errp);
}
/* Units are 0.001 centigrades relative to 0 C. s->temperature is 8.8
* fixed point, so units are 1/256 centigrades. A simple ratio will do.
*/
static void tmp105_set_temperature(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
TMP105State *s = TMP105(obj);
Error *local_err = NULL;
int64_t temp;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 13:48:54 +00:00
visit_type_int(v, name, &temp, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (temp >= 128000 || temp < -128000) {
error_setg(errp, "value %" PRId64 ".%03" PRIu64 " C is out of range",
temp / 1000, temp % 1000);
return;
}
s->temperature = (int16_t) (temp * 256 / 1000);
tmp105_alarm_update(s);
}
static const int tmp105_faultq[4] = { 1, 2, 4, 6 };
static void tmp105_read(TMP105State *s)
{
s->len = 0;
if ((s->config >> 1) & 1) { /* TM */
s->alarm = 0;
tmp105_interrupt_update(s);
}
switch (s->pointer & 3) {
case TMP105_REG_TEMPERATURE:
s->buf[s->len ++] = (((uint16_t) s->temperature) >> 8);
s->buf[s->len ++] = (((uint16_t) s->temperature) >> 0) &
(0xf0 << ((~s->config >> 5) & 3)); /* R */
break;
case TMP105_REG_CONFIG:
s->buf[s->len ++] = s->config;
break;
case TMP105_REG_T_LOW:
s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 8;
s->buf[s->len ++] = ((uint16_t) s->limit[0]) >> 0;
break;
case TMP105_REG_T_HIGH:
s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 8;
s->buf[s->len ++] = ((uint16_t) s->limit[1]) >> 0;
break;
}
}
static void tmp105_write(TMP105State *s)
{
switch (s->pointer & 3) {
case TMP105_REG_TEMPERATURE:
break;
case TMP105_REG_CONFIG:
if (s->buf[0] & ~s->config & (1 << 0)) /* SD */
printf("%s: TMP105 shutdown\n", __func__);
s->config = s->buf[0];
s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
tmp105_alarm_update(s);
break;
case TMP105_REG_T_LOW:
case TMP105_REG_T_HIGH:
if (s->len >= 3)
s->limit[s->pointer & 1] = (int16_t)
((((uint16_t) s->buf[0]) << 8) | s->buf[1]);
tmp105_alarm_update(s);
break;
}
}
static uint8_t tmp105_rx(I2CSlave *i2c)
{
TMP105State *s = TMP105(i2c);
if (s->len < 2) {
return s->buf[s->len ++];
} else {
return 0xff;
}
}
static int tmp105_tx(I2CSlave *i2c, uint8_t data)
{
TMP105State *s = TMP105(i2c);
if (s->len == 0) {
s->pointer = data;
s->len++;
} else {
if (s->len <= 2) {
s->buf[s->len - 1] = data;
}
s->len++;
tmp105_write(s);
}
return 0;
}
static int tmp105_event(I2CSlave *i2c, enum i2c_event event)
{
TMP105State *s = TMP105(i2c);
if (event == I2C_START_RECV) {
tmp105_read(s);
}
s->len = 0;
return 0;
}
static int tmp105_post_load(void *opaque, int version_id)
{
TMP105State *s = opaque;
s->faults = tmp105_faultq[(s->config >> 3) & 3]; /* F */
tmp105_interrupt_update(s);
return 0;
}
static const VMStateDescription vmstate_tmp105 = {
.name = "TMP105",
.version_id = 0,
.minimum_version_id = 0,
.post_load = tmp105_post_load,
.fields = (VMStateField[]) {
VMSTATE_UINT8(len, TMP105State),
VMSTATE_UINT8_ARRAY(buf, TMP105State, 2),
VMSTATE_UINT8(pointer, TMP105State),
VMSTATE_UINT8(config, TMP105State),
VMSTATE_INT16(temperature, TMP105State),
VMSTATE_INT16_ARRAY(limit, TMP105State, 2),
VMSTATE_UINT8(alarm, TMP105State),
VMSTATE_I2C_SLAVE(i2c, TMP105State),
VMSTATE_END_OF_LIST()
}
};
static void tmp105_reset(I2CSlave *i2c)
{
TMP105State *s = TMP105(i2c);
s->temperature = 0;
s->pointer = 0;
s->config = 0;
s->faults = tmp105_faultq[(s->config >> 3) & 3];
s->alarm = 0;
tmp105_interrupt_update(s);
}
static void tmp105_realize(DeviceState *dev, Error **errp)
{
I2CSlave *i2c = I2C_SLAVE(dev);
TMP105State *s = TMP105(i2c);
qdev_init_gpio_out(&i2c->qdev, &s->pin, 1);
tmp105_reset(&s->i2c);
}
static void tmp105_initfn(Object *obj)
{
object_property_add(obj, "temperature", "int",
tmp105_get_temperature,
qom: Drop parameter @errp of object_property_add() & friends The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-05 15:29:22 +00:00
tmp105_set_temperature, NULL, NULL);
}
static void tmp105_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
dc->realize = tmp105_realize;
k->event = tmp105_event;
k->recv = tmp105_rx;
k->send = tmp105_tx;
dc->vmsd = &vmstate_tmp105;
}
static const TypeInfo tmp105_info = {
.name = TYPE_TMP105,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(TMP105State),
.instance_init = tmp105_initfn,
.class_init = tmp105_class_init,
};
static void tmp105_register_types(void)
{
type_register_static(&tmp105_info);
}
type_init(tmp105_register_types)