2018-02-07 15:42:44 +00:00
|
|
|
=== Successful image creation (defaults) ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2", "size": 0}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-add", "arguments": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2", "node-name": "imgfile"}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "imgfile", "size": 134217728}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2018-05-23 16:19:00 +00:00
|
|
|
image: TEST_IMG
|
2018-02-07 15:42:44 +00:00
|
|
|
file format: IMGFMT
|
2019-04-17 17:11:01 +00:00
|
|
|
virtual size: 128 MiB (134217728 bytes)
|
2018-02-07 15:42:44 +00:00
|
|
|
cluster_size: 65536
|
|
|
|
|
Format specific information:
|
|
|
|
|
compat: 1.1
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 08:25:18 +00:00
|
|
|
compression type: zlib
|
2018-02-07 15:42:44 +00:00
|
|
|
lazy refcounts: false
|
|
|
|
|
refcount bits: 16
|
|
|
|
|
corrupt: false
|
2020-07-10 16:13:13 +00:00
|
|
|
extended l2: false
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Successful image creation (inline blockdev-add, explicit defaults) ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2", "nocow": false, "preallocation": "off", "size": 0}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 65536, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2"}, "lazy-refcounts": false, "preallocation": "off", "refcount-bits": 16, "size": 67108864, "version": "v3"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
|
|
|
|
image: TEST_IMG
|
2018-02-07 15:42:44 +00:00
|
|
|
file format: IMGFMT
|
2019-04-17 17:11:01 +00:00
|
|
|
virtual size: 64 MiB (67108864 bytes)
|
2018-02-07 15:42:44 +00:00
|
|
|
cluster_size: 65536
|
|
|
|
|
Format specific information:
|
|
|
|
|
compat: 1.1
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 08:25:18 +00:00
|
|
|
compression type: zlib
|
2018-02-07 15:42:44 +00:00
|
|
|
lazy refcounts: false
|
|
|
|
|
refcount bits: 16
|
|
|
|
|
corrupt: false
|
2020-07-10 16:13:13 +00:00
|
|
|
extended l2: false
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Successful image creation (v3 non-default options) ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2", "nocow": true, "preallocation": "falloc", "size": 0}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 2097152, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2"}, "lazy-refcounts": true, "preallocation": "metadata", "refcount-bits": 1, "size": 33554432, "version": "v3"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2018-05-23 16:19:00 +00:00
|
|
|
image: TEST_IMG
|
2018-02-07 15:42:44 +00:00
|
|
|
file format: IMGFMT
|
2019-04-17 17:11:01 +00:00
|
|
|
virtual size: 32 MiB (33554432 bytes)
|
2018-02-07 15:42:44 +00:00
|
|
|
cluster_size: 2097152
|
|
|
|
|
Format specific information:
|
|
|
|
|
compat: 1.1
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 08:25:18 +00:00
|
|
|
compression type: zlib
|
2018-02-07 15:42:44 +00:00
|
|
|
lazy refcounts: true
|
|
|
|
|
refcount bits: 1
|
|
|
|
|
corrupt: false
|
2020-07-10 16:13:13 +00:00
|
|
|
extended l2: false
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Successful image creation (v2 non-default options) ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2", "size": 0}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"backing-file": "TEST_DIR/PID-t.qcow2.base", "backing-fmt": "qcow2", "cluster-size": 512, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2"}, "size": 33554432, "version": "v2"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
|
|
|
|
image: TEST_IMG
|
2018-02-07 15:42:44 +00:00
|
|
|
file format: IMGFMT
|
2019-04-17 17:11:01 +00:00
|
|
|
virtual size: 32 MiB (33554432 bytes)
|
2018-02-07 15:42:44 +00:00
|
|
|
cluster_size: 512
|
2018-05-23 16:19:00 +00:00
|
|
|
backing file: TEST_IMG.base
|
2018-02-07 15:42:44 +00:00
|
|
|
backing file format: IMGFMT
|
|
|
|
|
Format specific information:
|
|
|
|
|
compat: 0.10
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 08:25:18 +00:00
|
|
|
compression type: zlib
|
2018-02-07 15:42:44 +00:00
|
|
|
refcount bits: 16
|
|
|
|
|
|
|
|
|
|
=== Successful image creation (encrypted) ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "encrypt": {"cipher-alg": "twofish-128", "cipher-mode": "ctr", "format": "luks", "hash-alg": "sha1", "iter-time": 10, "ivgen-alg": "plain64", "ivgen-hash-alg": "md5", "key-secret": "keysec0"}, "file": {"driver": "file", "filename": "TEST_DIR/PID-t.qcow2"}, "size": 33554432}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
|
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2018-05-23 16:19:00 +00:00
|
|
|
image: TEST_IMG
|
2018-02-07 15:42:44 +00:00
|
|
|
file format: IMGFMT
|
2019-04-17 17:11:01 +00:00
|
|
|
virtual size: 32 MiB (33554432 bytes)
|
2018-05-23 16:19:00 +00:00
|
|
|
encrypted: yes
|
|
|
|
|
cluster_size: 65536
|
2018-02-07 15:42:44 +00:00
|
|
|
Format specific information:
|
|
|
|
|
compat: 1.1
|
qcow2: introduce compression type feature
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-07 08:25:18 +00:00
|
|
|
compression type: zlib
|
2018-02-07 15:42:44 +00:00
|
|
|
lazy refcounts: false
|
|
|
|
|
refcount bits: 16
|
|
|
|
|
encrypt:
|
|
|
|
|
ivgen alg: plain64
|
|
|
|
|
hash alg: sha1
|
|
|
|
|
cipher alg: twofish-128
|
2018-05-23 16:19:00 +00:00
|
|
|
uuid: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
|
2018-02-07 15:42:44 +00:00
|
|
|
format: luks
|
|
|
|
|
cipher mode: ctr
|
|
|
|
|
slots:
|
|
|
|
|
[0]:
|
|
|
|
|
active: true
|
2018-05-23 16:19:00 +00:00
|
|
|
iters: XXX
|
2018-02-07 15:42:44 +00:00
|
|
|
key offset: 4096
|
|
|
|
|
stripes: 4000
|
|
|
|
|
[1]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 69632
|
|
|
|
|
[2]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 135168
|
|
|
|
|
[3]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 200704
|
|
|
|
|
[4]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 266240
|
|
|
|
|
[5]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 331776
|
|
|
|
|
[6]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 397312
|
|
|
|
|
[7]:
|
|
|
|
|
active: false
|
|
|
|
|
key offset: 462848
|
|
|
|
|
payload offset: 528384
|
2018-05-23 16:19:00 +00:00
|
|
|
master key iters: XXX
|
2018-02-07 15:42:44 +00:00
|
|
|
corrupt: false
|
2020-07-10 16:13:13 +00:00
|
|
|
extended l2: false
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid BlockdevRef ===
|
|
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "this doesn't exist", "size": 33554432}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2021-03-05 15:19:28 +00:00
|
|
|
Job failed: Cannot find device='this doesn't exist' nor node-name='this doesn't exist'
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid sizes ===
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 1234}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Image size must be a multiple of 512 bytes
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 18446744073709551104}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Could not resize image: Image size cannot be negative
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 9223372036854775808}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Could not resize image: Image size cannot be negative
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 9223372036854775296}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2020-12-11 18:39:19 +00:00
|
|
|
Job failed: Could not resize image: offset(9223372036854775296) exceeds maximum(9223372035781033984)
|
block: introduce BDRV_MAX_LENGTH
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-03 22:27:13 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
|
|
|
|
|
|
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 9223372035781033984}}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Could not resize image: Failed to grow the L1 table: File too large
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid version ===
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "size": 67108864, "version": "v1"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"error": {"class": "GenericError", "desc": "Invalid parameter 'v1'"}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "lazy-refcounts": true, "size": 67108864, "version": "v2"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Lazy refcounts only supported with compatibility level 1.1 and above (use version=v3 or greater)
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "refcount-bits": 8, "size": 67108864, "version": "v2"}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Different refcount widths than 16 bits require compatibility level 1.1 or above (use version=v3 or greater)
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid backing file options ===
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"backing-file": "/dev/null", "driver": "qcow2", "file": "node0", "preallocation": "full", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2020-07-10 16:13:14 +00:00
|
|
|
Job failed: Backing file and preallocation can only be used at the same time if extended_l2 is on
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"backing-fmt": "qcow2", "driver": "qcow2", "file": "node0", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Backing format cannot be used without backing file
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid cluster size ===
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 1234, "driver": "qcow2", "file": "node0", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Cluster size must be a power of two between 512 and 2048k
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 128, "driver": "qcow2", "file": "node0", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Cluster size must be a power of two between 512 and 2048k
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 4194304, "driver": "qcow2", "file": "node0", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Cluster size must be a power of two between 512 and 2048k
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 0, "driver": "qcow2", "file": "node0", "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Cluster size must be a power of two between 512 and 2048k
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"cluster-size": 512, "driver": "qcow2", "file": "node0", "size": 281474976710656}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Could not resize image: Failed to grow the L1 table: File too large
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|
|
|
|
|
=== Invalid refcount width ===
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "refcount-bits": 128, "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Refcount width must be a power of two and may not exceed 64 bits
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "refcount-bits": 0, "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Refcount width must be a power of two and may not exceed 64 bits
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
|
2019-02-10 14:57:36 +00:00
|
|
|
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options": {"driver": "qcow2", "file": "node0", "refcount-bits": 7, "size": 67108864}}}
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"return": {}}
|
2018-05-23 16:19:00 +00:00
|
|
|
Job failed: Refcount width must be a power of two and may not exceed 64 bits
|
iotests: Unify log outputs between Python 2 and 3
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-22 13:53:07 +00:00
|
|
|
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
|
|
|
|
|
{"return": {}}
|
2018-02-07 15:42:44 +00:00
|
|
|
|