2017-07-28 22:46:05 +00:00
# See docs/devel/tracing.txt for syntax documentation.
2016-06-16 08:39:57 +00:00
2018-01-19 10:39:20 +00:00
# hw/virtio/vhost.c
2018-01-19 10:39:21 +00:00
vhost_commit(bool started, bool changed) "Started: %d Changed: %d"
2018-01-19 10:39:20 +00:00
vhost_region_add_section(const char *name, uint64_t gpa, uint64_t size, uint64_t host) "%s: 0x%"PRIx64"+0x%"PRIx64" @ 0x%"PRIx64
2018-03-12 17:21:21 +00:00
vhost_region_add_section_merge(const char *name, uint64_t new_size, uint64_t gpa, uint64_t owr) "%s: size: 0x%"PRIx64 " gpa: 0x%"PRIx64 " owr: 0x%"PRIx64
vhost_region_add_section_aligned(const char *name, uint64_t gpa, uint64_t size, uint64_t host) "%s: 0x%"PRIx64"+0x%"PRIx64" @ 0x%"PRIx64
2018-01-19 10:39:24 +00:00
vhost_section(const char *name, int r) "%s:%d"
2018-04-27 09:07:24 +00:00
vhost_iotlb_miss(void *dev, int step) "%p step %d"
2018-01-19 10:39:20 +00:00
2018-03-12 17:21:06 +00:00
# hw/virtio/vhost-user.c
2018-03-12 17:21:20 +00:00
vhost_user_postcopy_end_entry(void) ""
vhost_user_postcopy_end_exit(void) ""
2018-03-12 17:21:13 +00:00
vhost_user_postcopy_fault_handler(const char *name, uint64_t fault_address, int nregions) "%s: @0x%"PRIx64" nregions:%d"
vhost_user_postcopy_fault_handler_loop(int i, uint64_t client_base, uint64_t size) "%d: client 0x%"PRIx64" +0x%"PRIx64
vhost_user_postcopy_fault_handler_found(int i, uint64_t region_offset, uint64_t rb_offset) "%d: region_offset: 0x%"PRIx64" rb_offset:0x%"PRIx64
2018-03-12 17:21:06 +00:00
vhost_user_postcopy_listen(void) ""
2018-03-12 17:21:10 +00:00
vhost_user_set_mem_table_postcopy(uint64_t client_addr, uint64_t qhva, int reply_i, int region_i) "client:0x%"PRIx64" for hva: 0x%"PRIx64" reply %d region %d"
2018-03-12 17:21:11 +00:00
vhost_user_set_mem_table_withfd(int index, const char *name, uint64_t memory_size, uint64_t guest_phys_addr, uint64_t userspace_addr, uint64_t offset) "%d:%s: size:0x%"PRIx64" GPA:0x%"PRIx64" QVA/userspace:0x%"PRIx64" RB offset:0x%"PRIx64
2018-03-12 17:21:16 +00:00
vhost_user_postcopy_waker(const char *rb, uint64_t rb_offset) "%s + 0x%"PRIx64
vhost_user_postcopy_waker_found(uint64_t client_addr) "0x%"PRIx64
vhost_user_postcopy_waker_nomatch(const char *rb, uint64_t rb_offset) "%s + 0x%"PRIx64
2018-03-12 17:21:06 +00:00
2016-06-16 08:39:57 +00:00
# hw/virtio/virtio.c
2017-06-01 13:54:47 +00:00
virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u"
2016-06-16 08:39:57 +00:00
virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
virtio: set ISR on dataplane notifications
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18 15:07:02 +00:00
virtio_notify_irqfd(void *vdev, void *vq) "vdev %p vq %p"
2016-06-16 08:39:57 +00:00
virtio_notify(void *vdev, void *vq) "vdev %p vq %p"
virtio_set_status(void *vdev, uint8_t val) "vdev %p val %u"
# hw/virtio/virtio-rng.c
virtio_rng_guest_not_ready(void *rng) "rng %p: guest not ready"
2017-04-12 13:53:12 +00:00
virtio_rng_cpu_is_stopped(void *rng, int size) "rng %p: cpu is stopped, dropping %d bytes"
virtio_rng_popped(void *rng) "rng %p: elem popped"
2016-06-16 08:39:57 +00:00
virtio_rng_pushed(void *rng, size_t len) "rng %p: %zd bytes pushed"
virtio_rng_request(void *rng, size_t size, unsigned quota) "rng %p: %zd bytes requested, %u bytes quota left"
2017-04-12 13:53:12 +00:00
virtio_rng_vm_state_change(void *rng, int running, int state) "rng %p: state change to running %d state %d"
2016-06-16 08:39:57 +00:00
2016-09-14 17:03:44 +00:00
# hw/virtio/virtio-balloon.c
2016-12-16 11:41:55 +00:00
#
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 16:01:35 +00:00
virtio_balloon_bad_addr(uint64_t gpa) "0x%"PRIx64
virtio_balloon_handle_output(const char *name, uint64_t gpa) "section name: %s gpa: 0x%"PRIx64
2016-09-14 17:03:44 +00:00
virtio_balloon_get_config(uint32_t num_pages, uint32_t actual) "num_pages: %d actual: %d"
virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual: %d oldactual: %d"
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31 16:01:35 +00:00
virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon target: 0x%"PRIx64" num_pages: %d"
