xemu/block/iscsi.c

1522 lines
42 KiB
C
Raw Normal View History

iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
/*
* QEMU Block driver for iSCSI images
*
* Copyright (c) 2010-2011 Ronnie Sahlberg <ronniesahlberg@gmail.com>
* Copyright (c) 2012-2013 Peter Lieven <pl@kamp.de>
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "config-host.h"
#include <poll.h>
#include <arpa/inet.h>
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
#include "qemu-common.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "block/block_int.h"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
#include "trace.h"
#include "block/scsi.h"
#include "qemu/iov.h"
#include "sysemu/sysemu.h"
#include "qmp-commands.h"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
#include <iscsi/iscsi.h>
#include <iscsi/scsi-lowlevel.h>
#ifdef __linux__
#include <scsi/sg.h>
#include <block/scsi.h>
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
typedef struct IscsiLun {
struct iscsi_context *iscsi;
int lun;
enum scsi_inquiry_peripheral_device_type type;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
int block_size;
uint64_t num_blocks;
int events;
QEMUTimer *nop_timer;
uint8_t lbpme;
uint8_t lbprz;
uint8_t has_write_same;
struct scsi_inquiry_logical_block_provisioning lbp;
struct scsi_inquiry_block_limits bl;
unsigned char *zeroblock;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
} IscsiLun;
typedef struct IscsiTask {
int status;
int complete;
int retries;
int do_retry;
struct scsi_task *task;
Coroutine *co;
QEMUBH *bh;
} IscsiTask;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
typedef struct IscsiAIOCB {
BlockDriverAIOCB common;
QEMUIOVector *qiov;
QEMUBH *bh;
IscsiLun *iscsilun;
struct scsi_task *task;
uint8_t *buf;
int status;
int canceled;
int retries;
int64_t sector_num;
int nb_sectors;
#ifdef __linux__
sg_io_hdr_t *ioh;
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
} IscsiAIOCB;
#define NOP_INTERVAL 5000
#define MAX_NOP_FAILURES 3
#define ISCSI_CMD_RETRIES 5
static void
iscsi_bh_cb(void *p)
{
IscsiAIOCB *acb = p;
qemu_bh_delete(acb->bh);
g_free(acb->buf);
acb->buf = NULL;
if (acb->canceled == 0) {
acb->common.cb(acb->common.opaque, acb->status);
}
if (acb->task != NULL) {
scsi_free_scsi_task(acb->task);
acb->task = NULL;
}
qemu_aio_release(acb);
}
static void
iscsi_schedule_bh(IscsiAIOCB *acb)
{
if (acb->bh) {
return;
}
acb->bh = qemu_bh_new(iscsi_bh_cb, acb);
qemu_bh_schedule(acb->bh);
}
static void iscsi_co_generic_bh_cb(void *opaque)
{
struct IscsiTask *iTask = opaque;
qemu_bh_delete(iTask->bh);
qemu_coroutine_enter(iTask->co, NULL);
}
static void
iscsi_co_generic_cb(struct iscsi_context *iscsi, int status,
void *command_data, void *opaque)
{
struct IscsiTask *iTask = opaque;
struct scsi_task *task = command_data;
iTask->complete = 1;
iTask->status = status;
iTask->do_retry = 0;
iTask->task = task;
if (iTask->retries-- > 0 && status == SCSI_STATUS_CHECK_CONDITION
&& task->sense.key == SCSI_SENSE_UNIT_ATTENTION) {
iTask->do_retry = 1;
goto out;
}
if (status != SCSI_STATUS_GOOD) {
error_report("iSCSI: Failure. %s", iscsi_get_error(iscsi));
}
out:
if (iTask->co) {
iTask->bh = qemu_bh_new(iscsi_co_generic_bh_cb, iTask);
qemu_bh_schedule(iTask->bh);
}
}
static void iscsi_co_init_iscsitask(IscsiLun *iscsilun, struct IscsiTask *iTask)
{
*iTask = (struct IscsiTask) {
.co = qemu_coroutine_self(),
.retries = ISCSI_CMD_RETRIES,
};
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
static void
iscsi_abort_task_cb(struct iscsi_context *iscsi, int status, void *command_data,
void *private_data)
{
IscsiAIOCB *acb = private_data;
acb->status = -ECANCELED;
iscsi_schedule_bh(acb);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
static void
iscsi_aio_cancel(BlockDriverAIOCB *blockacb)
{
IscsiAIOCB *acb = (IscsiAIOCB *)blockacb;
IscsiLun *iscsilun = acb->iscsilun;
if (acb->status != -EINPROGRESS) {
return;
}
acb->canceled = 1;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
/* send a task mgmt call to the target to cancel the task on the target */
iscsi_task_mgmt_abort_task_async(iscsilun->iscsi, acb->task,
iscsi_abort_task_cb, acb);
while (acb->status == -EINPROGRESS) {
qemu_aio_wait();
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
static const AIOCBInfo iscsi_aiocb_info = {
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
.aiocb_size = sizeof(IscsiAIOCB),
.cancel = iscsi_aio_cancel,
};
static void iscsi_process_read(void *arg);
static void iscsi_process_write(void *arg);
static void
iscsi_set_events(IscsiLun *iscsilun)
{
struct iscsi_context *iscsi = iscsilun->iscsi;
int ev;
/* We always register a read handler. */
ev = POLLIN;
ev |= iscsi_which_events(iscsi);
if (ev != iscsilun->events) {
qemu_aio_set_fd_handler(iscsi_get_fd(iscsi),
iscsi_process_read,
(ev & POLLOUT) ? iscsi_process_write : NULL,
iscsilun);
}
iscsilun->events = ev;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
static void
iscsi_process_read(void *arg)
{
IscsiLun *iscsilun = arg;
struct iscsi_context *iscsi = iscsilun->iscsi;
iscsi_service(iscsi, POLLIN);
iscsi_set_events(iscsilun);
}
static void
iscsi_process_write(void *arg)
{
IscsiLun *iscsilun = arg;
struct iscsi_context *iscsi = iscsilun->iscsi;
iscsi_service(iscsi, POLLOUT);
iscsi_set_events(iscsilun);
}
static int64_t sector_lun2qemu(int64_t sector, IscsiLun *iscsilun)
{
return sector * iscsilun->block_size / BDRV_SECTOR_SIZE;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
static int64_t sector_qemu2lun(int64_t sector, IscsiLun *iscsilun)
{
return sector * BDRV_SECTOR_SIZE / iscsilun->block_size;
}
static bool is_request_lun_aligned(int64_t sector_num, int nb_sectors,
IscsiLun *iscsilun)
{
if ((sector_num * BDRV_SECTOR_SIZE) % iscsilun->block_size ||
(nb_sectors * BDRV_SECTOR_SIZE) % iscsilun->block_size) {
error_report("iSCSI misaligned request: "
"iscsilun->block_size %u, sector_num %" PRIi64
", nb_sectors %d",
iscsilun->block_size, sector_num, nb_sectors);
return 0;
}
return 1;
}
static int coroutine_fn iscsi_co_writev(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
QEMUIOVector *iov)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t num_sectors;
uint8_t *data = NULL;
uint8_t *buf = NULL;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
lba = sector_qemu2lun(sector_num, iscsilun);
num_sectors = sector_qemu2lun(nb_sectors, iscsilun);
#if !defined(LIBISCSI_FEATURE_IOVECTOR)
/* if the iovec only contains one buffer we can pass it directly */
if (iov->niov == 1) {
data = iov->iov[0].iov_base;
} else {
size_t size = MIN(nb_sectors * BDRV_SECTOR_SIZE, iov->size);
buf = g_malloc(size);
qemu_iovec_to_buf(iov, 0, buf, size);
data = buf;
}
#endif
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
iTask.task = iscsi_write16_task(iscsilun->iscsi, iscsilun->lun, lba,
data, num_sectors * iscsilun->block_size,
iscsilun->block_size, 0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
if (iTask.task == NULL) {
g_free(buf);
return -ENOMEM;
}
#if defined(LIBISCSI_FEATURE_IOVECTOR)
scsi_task_set_iov_out(iTask.task, (struct scsi_iovec *) iov->iov,
iov->niov);
#endif
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
goto retry;
}
g_free(buf);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
return 0;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
int64_t sector_num, int nb_sectors,
QEMUIOVector *iov)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t num_sectors;
#if !defined(LIBISCSI_FEATURE_IOVECTOR)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
int i;
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
lba = sector_qemu2lun(sector_num, iscsilun);
num_sectors = sector_qemu2lun(nb_sectors, iscsilun);
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
switch (iscsilun->type) {
case TYPE_DISK:
iTask.task = iscsi_read16_task(iscsilun->iscsi, iscsilun->lun, lba,
num_sectors * iscsilun->block_size,
iscsilun->block_size, 0, 0, 0, 0, 0,
iscsi_co_generic_cb, &iTask);
break;
default:
iTask.task = iscsi_read10_task(iscsilun->iscsi, iscsilun->lun, lba,
num_sectors * iscsilun->block_size,
iscsilun->block_size,
#if !defined(CONFIG_LIBISCSI_1_4) /* API change from 1.4.0 to 1.5.0 */
0, 0, 0, 0, 0,
#endif
iscsi_co_generic_cb, &iTask);
break;
}
if (iTask.task == NULL) {
return -ENOMEM;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
#if defined(LIBISCSI_FEATURE_IOVECTOR)
scsi_task_set_iov_in(iTask.task, (struct scsi_iovec *) iov->iov, iov->niov);
#else
for (i = 0; i < iov->niov; i++) {
scsi_task_add_data_in_buffer(iTask.task,
iov->iov[i].iov_len,
iov->iov[i].iov_base);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
#endif
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
if (iTask.do_retry) {
goto retry;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
return 0;
}
static int coroutine_fn iscsi_co_flush(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsi_synchronizecache10_task(iscsilun->iscsi, iscsilun->lun, 0, 0, 0,
0, iscsi_co_generic_cb, &iTask) == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
if (iTask.do_retry) {
goto retry;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
return 0;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
#ifdef __linux__
static void
iscsi_aio_ioctl_cb(struct iscsi_context *iscsi, int status,
void *command_data, void *opaque)
{
IscsiAIOCB *acb = opaque;
g_free(acb->buf);
acb->buf = NULL;
if (acb->canceled != 0) {
return;
}
acb->status = 0;
if (status < 0) {
error_report("Failed to ioctl(SG_IO) to iSCSI lun. %s",
iscsi_get_error(iscsi));
acb->status = -EIO;
}
acb->ioh->driver_status = 0;
acb->ioh->host_status = 0;
acb->ioh->resid = 0;
#define SG_ERR_DRIVER_SENSE 0x08
if (status == SCSI_STATUS_CHECK_CONDITION && acb->task->datain.size >= 2) {
int ss;
acb->ioh->driver_status |= SG_ERR_DRIVER_SENSE;
acb->ioh->sb_len_wr = acb->task->datain.size - 2;
ss = (acb->ioh->mx_sb_len >= acb->ioh->sb_len_wr) ?
acb->ioh->mx_sb_len : acb->ioh->sb_len_wr;
memcpy(acb->ioh->sbp, &acb->task->datain.data[2], ss);
}
iscsi_schedule_bh(acb);
}
static BlockDriverAIOCB *iscsi_aio_ioctl(BlockDriverState *bs,
unsigned long int req, void *buf,
BlockDriverCompletionFunc *cb, void *opaque)
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = iscsilun->iscsi;
struct iscsi_data data;
IscsiAIOCB *acb;
assert(req == SG_IO);
acb = qemu_aio_get(&iscsi_aiocb_info, bs, cb, opaque);
acb->iscsilun = iscsilun;
acb->canceled = 0;
acb->bh = NULL;
acb->status = -EINPROGRESS;
acb->buf = NULL;
acb->ioh = buf;
acb->task = malloc(sizeof(struct scsi_task));
if (acb->task == NULL) {
error_report("iSCSI: Failed to allocate task for scsi command. %s",
iscsi_get_error(iscsi));
qemu_aio_release(acb);
return NULL;
}
memset(acb->task, 0, sizeof(struct scsi_task));
switch (acb->ioh->dxfer_direction) {
case SG_DXFER_TO_DEV:
acb->task->xfer_dir = SCSI_XFER_WRITE;
break;
case SG_DXFER_FROM_DEV:
acb->task->xfer_dir = SCSI_XFER_READ;
break;
default:
acb->task->xfer_dir = SCSI_XFER_NONE;
break;
}
acb->task->cdb_size = acb->ioh->cmd_len;
memcpy(&acb->task->cdb[0], acb->ioh->cmdp, acb->ioh->cmd_len);
acb->task->expxferlen = acb->ioh->dxfer_len;
data.size = 0;
if (acb->task->xfer_dir == SCSI_XFER_WRITE) {
if (acb->ioh->iovec_count == 0) {
data.data = acb->ioh->dxferp;
data.size = acb->ioh->dxfer_len;
} else {
#if defined(LIBISCSI_FEATURE_IOVECTOR)
scsi_task_set_iov_out(acb->task,
(struct scsi_iovec *) acb->ioh->dxferp,
acb->ioh->iovec_count);
#else
struct iovec *iov = (struct iovec *)acb->ioh->dxferp;
acb->buf = g_malloc(acb->ioh->dxfer_len);
data.data = acb->buf;
data.size = iov_to_buf(iov, acb->ioh->iovec_count, 0,
acb->buf, acb->ioh->dxfer_len);
#endif
}
}
if (iscsi_scsi_command_async(iscsi, iscsilun->lun, acb->task,
iscsi_aio_ioctl_cb,
(data.size > 0) ? &data : NULL,
acb) != 0) {
scsi_free_scsi_task(acb->task);
qemu_aio_release(acb);
return NULL;
}
/* tell libiscsi to read straight into the buffer we got from ioctl */
if (acb->task->xfer_dir == SCSI_XFER_READ) {
if (acb->ioh->iovec_count == 0) {
scsi_task_add_data_in_buffer(acb->task,
acb->ioh->dxfer_len,
acb->ioh->dxferp);
} else {
#if defined(LIBISCSI_FEATURE_IOVECTOR)
scsi_task_set_iov_in(acb->task,
(struct scsi_iovec *) acb->ioh->dxferp,
acb->ioh->iovec_count);
#else
int i;
for (i = 0; i < acb->ioh->iovec_count; i++) {
struct iovec *iov = (struct iovec *)acb->ioh->dxferp;
scsi_task_add_data_in_buffer(acb->task,
iov[i].iov_len,
iov[i].iov_base);
}
#endif
}
}
iscsi_set_events(iscsilun);
return &acb->common;
}
static void ioctl_cb(void *opaque, int status)
{
int *p_status = opaque;
*p_status = status;
}
static int iscsi_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
{
IscsiLun *iscsilun = bs->opaque;
int status;
switch (req) {
case SG_GET_VERSION_NUM:
*(int *)buf = 30000;
break;
case SG_GET_SCSI_ID:
((struct sg_scsi_id *)buf)->scsi_type = iscsilun->type;
break;
case SG_IO:
status = -EINPROGRESS;
iscsi_aio_ioctl(bs, req, buf, ioctl_cb, &status);
while (status == -EINPROGRESS) {
qemu_aio_wait();
}
return 0;
default:
return -1;
}
return 0;
}
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
static int64_t
iscsi_getlength(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
int64_t len;
len = iscsilun->num_blocks;
len *= iscsilun->block_size;
return len;
}
#if defined(LIBISCSI_FEATURE_IOVECTOR)
static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
int64_t sector_num,
int nb_sectors, int *pnum)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
int64_t ret;
iscsi_co_init_iscsitask(iscsilun, &iTask);
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
ret = -EINVAL;
goto out;
}
/* default to all sectors allocated */
ret = BDRV_BLOCK_DATA;
ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
*pnum = nb_sectors;
/* LUN does not support logical block provisioning */
if (iscsilun->lbpme == 0) {
goto out;
}
retry:
if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
sector_qemu2lun(sector_num, iscsilun),
8 + 16, iscsi_co_generic_cb,
&iTask) == NULL) {
ret = -ENOMEM;
goto out;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.do_retry) {
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
goto retry;
}
if (iTask.status != SCSI_STATUS_GOOD) {
/* in case the get_lba_status_callout fails (i.e.
* because the device is busy or the cmd is not
* supported) we pretend all blocks are allocated
* for backwards compatibility */
goto out;
}
lbas = scsi_datain_unmarshall(iTask.task);
if (lbas == NULL) {
ret = -EIO;
goto out;
}
lbasd = &lbas->descriptors[0];
if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
ret = -EIO;
goto out;
}
*pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
if (*pnum > nb_sectors) {
*pnum = nb_sectors;
}
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
ret &= ~BDRV_BLOCK_DATA;
if (iscsilun->lbprz) {
ret |= BDRV_BLOCK_ZERO;
}
}
out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
return ret;
}
#endif /* LIBISCSI_FEATURE_IOVECTOR */
static int
coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
int nb_sectors)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
struct unmap_list list;
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (!iscsilun->lbp.lbpu) {
/* UNMAP is not supported by the target */
return 0;
}
list.lba = sector_qemu2lun(sector_num, iscsilun);
list.num = sector_qemu2lun(nb_sectors, iscsilun);
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsi_unmap_task(iscsilun->iscsi, iscsilun->lun, 0, 0, &list, 1,
iscsi_co_generic_cb, &iTask) == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
goto retry;
}
if (iTask.status == SCSI_STATUS_CHECK_CONDITION) {
/* the target might fail with a check condition if it
is not happy with the alignment of the UNMAP request
we silently fail in this case */
return 0;
}
if (iTask.status != SCSI_STATUS_GOOD) {
return -EIO;
}
return 0;
}
#if defined(SCSI_SENSE_ASCQ_CAPACITY_DATA_HAS_CHANGED)
static int
coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, BdrvRequestFlags flags)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
uint64_t lba;
uint32_t nb_blocks;
if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
if (!(flags & BDRV_REQ_MAY_UNMAP) && !iscsilun->has_write_same) {
/* WRITE SAME without UNMAP is not supported by the target */
return -ENOTSUP;
}
if ((flags & BDRV_REQ_MAY_UNMAP) && !iscsilun->lbp.lbpws) {
/* WRITE SAME with UNMAP is not supported by the target */
return -ENOTSUP;
}
lba = sector_qemu2lun(sector_num, iscsilun);
nb_blocks = sector_qemu2lun(nb_sectors, iscsilun);
if (iscsilun->zeroblock == NULL) {
iscsilun->zeroblock = g_malloc0(iscsilun->block_size);
}
iscsi_co_init_iscsitask(iscsilun, &iTask);
retry:
if (iscsi_writesame16_task(iscsilun->iscsi, iscsilun->lun, lba,
iscsilun->zeroblock, iscsilun->block_size,
nb_blocks, 0, !!(flags & BDRV_REQ_MAY_UNMAP),
0, 0, iscsi_co_generic_cb, &iTask) == NULL) {
return -ENOMEM;
}
while (!iTask.complete) {
iscsi_set_events(iscsilun);
qemu_coroutine_yield();
}
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
iTask.task = NULL;
}
if (iTask.do_retry) {
goto retry;
}
if (iTask.status != SCSI_STATUS_GOOD) {
if (iTask.status == SCSI_STATUS_CHECK_CONDITION &&
iTask.task->sense.key == SCSI_SENSE_ILLEGAL_REQUEST &&
iTask.task->sense.ascq == SCSI_SENSE_ASCQ_INVALID_OPERATION_CODE) {
/* WRITE SAME is not supported by the target */
iscsilun->has_write_same = false;
return -ENOTSUP;
}
return -EIO;
}
return 0;
}
#endif /* SCSI_SENSE_ASCQ_CAPACITY_DATA_HAS_CHANGED */
static void parse_chap(struct iscsi_context *iscsi, const char *target,
Error **errp)
{
QemuOptsList *list;
QemuOpts *opts;
const char *user = NULL;
const char *password = NULL;
list = qemu_find_opts("iscsi");
if (!list) {
return;
}
opts = qemu_opts_find(list, target);
if (opts == NULL) {
opts = QTAILQ_FIRST(&list->head);
if (!opts) {
return;
}
}
user = qemu_opt_get(opts, "user");
if (!user) {
return;
}
password = qemu_opt_get(opts, "password");
if (!password) {
error_setg(errp, "CHAP username specified but no password was given");
return;
}
if (iscsi_set_initiator_username_pwd(iscsi, user, password)) {
error_setg(errp, "Failed to set initiator username and password");
}
}
static void parse_header_digest(struct iscsi_context *iscsi, const char *target,
Error **errp)
{
QemuOptsList *list;
QemuOpts *opts;
const char *digest = NULL;
list = qemu_find_opts("iscsi");
if (!list) {
return;
}
opts = qemu_opts_find(list, target);
if (opts == NULL) {
opts = QTAILQ_FIRST(&list->head);
if (!opts) {
return;
}
}
digest = qemu_opt_get(opts, "header-digest");
if (!digest) {
return;
}
if (!strcmp(digest, "CRC32C")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_CRC32C);
} else if (!strcmp(digest, "NONE")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE);
} else if (!strcmp(digest, "CRC32C-NONE")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_CRC32C_NONE);
} else if (!strcmp(digest, "NONE-CRC32C")) {
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE_CRC32C);
} else {
error_setg(errp, "Invalid header-digest setting : %s", digest);
}
}
static char *parse_initiator_name(const char *target)
{
QemuOptsList *list;
QemuOpts *opts;
const char *name;
char *iscsi_name;
UuidInfo *uuid_info;
list = qemu_find_opts("iscsi");
if (list) {
opts = qemu_opts_find(list, target);
if (!opts) {
opts = QTAILQ_FIRST(&list->head);
}
if (opts) {
name = qemu_opt_get(opts, "initiator-name");
if (name) {
return g_strdup(name);
}
}
}
uuid_info = qmp_query_uuid(NULL);
if (strcmp(uuid_info->UUID, UUID_NONE) == 0) {
name = qemu_get_vm_name();
} else {
name = uuid_info->UUID;
}
iscsi_name = g_strdup_printf("iqn.2008-11.org.linux-kvm%s%s",
name ? ":" : "", name ? name : "");
qapi_free_UuidInfo(uuid_info);
return iscsi_name;
}
#if defined(LIBISCSI_FEATURE_NOP_COUNTER)
static void iscsi_nop_timed_event(void *opaque)
{
IscsiLun *iscsilun = opaque;
if (iscsi_get_nops_in_flight(iscsilun->iscsi) > MAX_NOP_FAILURES) {
error_report("iSCSI: NOP timeout. Reconnecting...");
iscsi_reconnect(iscsilun->iscsi);
}
if (iscsi_nop_out_async(iscsilun->iscsi, NULL, NULL, 0, NULL) != 0) {
error_report("iSCSI: failed to sent NOP-Out. Disabling NOP messages.");
return;
}
timer_mod(iscsilun->nop_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + NOP_INTERVAL);
iscsi_set_events(iscsilun);
}
#endif
static void iscsi_readcapacity_sync(IscsiLun *iscsilun, Error **errp)
{
struct scsi_task *task = NULL;
struct scsi_readcapacity10 *rc10 = NULL;
struct scsi_readcapacity16 *rc16 = NULL;
int retries = ISCSI_CMD_RETRIES;
do {
if (task != NULL) {
scsi_free_scsi_task(task);
task = NULL;
}
switch (iscsilun->type) {
case TYPE_DISK:
task = iscsi_readcapacity16_sync(iscsilun->iscsi, iscsilun->lun);
if (task != NULL && task->status == SCSI_STATUS_GOOD) {
rc16 = scsi_datain_unmarshall(task);
if (rc16 == NULL) {
error_setg(errp, "iSCSI: Failed to unmarshall readcapacity16 data.");
} else {
iscsilun->block_size = rc16->block_length;
iscsilun->num_blocks = rc16->returned_lba + 1;
iscsilun->lbpme = rc16->lbpme;
iscsilun->lbprz = rc16->lbprz;
}
}
break;
case TYPE_ROM:
task = iscsi_readcapacity10_sync(iscsilun->iscsi, iscsilun->lun, 0, 0);
if (task != NULL && task->status == SCSI_STATUS_GOOD) {
rc10 = scsi_datain_unmarshall(task);
if (rc10 == NULL) {
error_setg(errp, "iSCSI: Failed to unmarshall readcapacity10 data.");
} else {
iscsilun->block_size = rc10->block_size;
if (rc10->lba == 0) {
/* blank disk loaded */
iscsilun->num_blocks = 0;
} else {
iscsilun->num_blocks = rc10->lba + 1;
}
}
}
break;
default:
return;
}
} while (task != NULL && task->status == SCSI_STATUS_CHECK_CONDITION
&& task->sense.key == SCSI_SENSE_UNIT_ATTENTION
&& retries-- > 0);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
error_setg(errp, "iSCSI: failed to send readcapacity10 command.");
}
if (task) {
scsi_free_scsi_task(task);
}
}
/* TODO Convert to fine grained options */
static QemuOptsList runtime_opts = {
.name = "iscsi",
.head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
.desc = {
{
.name = "filename",
.type = QEMU_OPT_STRING,
.help = "URL to the iscsi image",
},
{ /* end of list */ }
},
};
static struct scsi_task *iscsi_do_inquiry(struct iscsi_context *iscsi, int lun,
int evpd, int pc, Error **errp)
{
int full_size;
struct scsi_task *task = NULL;
task = iscsi_inquiry_sync(iscsi, lun, evpd, pc, 64);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
goto fail;
}
full_size = scsi_datain_getfullsize(task);
if (full_size > task->datain.size) {
scsi_free_scsi_task(task);
/* we need more data for the full list */
task = iscsi_inquiry_sync(iscsi, lun, evpd, pc, full_size);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
goto fail;
}
}
return task;
fail:
error_setg(errp, "iSCSI: Inquiry command failed : %s",
iscsi_get_error(iscsi));
if (task) {
scsi_free_scsi_task(task);
return NULL;
}
return NULL;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
/*
* We support iscsi url's on the form
* iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun>
*
* Note: flags are currently not used by iscsi_open. If this function
* is changed such that flags are used, please examine iscsi_reopen_prepare()
* to see if needs to be changed as well.
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
*/
static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = NULL;
struct iscsi_url *iscsi_url = NULL;
struct scsi_task *task = NULL;
struct scsi_inquiry_standard *inq = NULL;
char *initiator_name = NULL;
QemuOpts *opts;
Error *local_err = NULL;
const char *filename;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
int ret;
if ((BDRV_SECTOR_SIZE % 512) != 0) {
error_setg(errp, "iSCSI: Invalid BDRV_SECTOR_SIZE. "
"BDRV_SECTOR_SIZE(%lld) is not a multiple "
"of 512", BDRV_SECTOR_SIZE);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
return -EINVAL;
}
opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
qemu_opts_absorb_qdict(opts, options, &local_err);
if (local_err) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
filename = qemu_opt_get(opts, "filename");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
iscsi_url = iscsi_parse_full_url(iscsi, filename);
if (iscsi_url == NULL) {
error_setg(errp, "Failed to parse URL : %s", filename);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
memset(iscsilun, 0, sizeof(IscsiLun));
initiator_name = parse_initiator_name(iscsi_url->target);
iscsi = iscsi_create_context(initiator_name);
if (iscsi == NULL) {
error_setg(errp, "iSCSI: Failed to create iSCSI context.");
ret = -ENOMEM;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iscsi_set_targetname(iscsi, iscsi_url->target)) {
error_setg(errp, "iSCSI: Failed to set target name.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
if (iscsi_url->user != NULL) {
ret = iscsi_set_initiator_username_pwd(iscsi, iscsi_url->user,
iscsi_url->passwd);
if (ret != 0) {
error_setg(errp, "Failed to set initiator username and password");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
}
/* check if we got CHAP username/password via the options */
parse_chap(iscsi, iscsi_url->target, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iscsi_set_session_type(iscsi, ISCSI_SESSION_NORMAL) != 0) {
error_setg(errp, "iSCSI: Failed to set session type to normal.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
iscsi_set_header_digest(iscsi, ISCSI_HEADER_DIGEST_NONE_CRC32C);
/* check if we got HEADER_DIGEST via the options */
parse_header_digest(iscsi, iscsi_url->target, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
ret = -EINVAL;
goto out;
}
if (iscsi_full_connect_sync(iscsi, iscsi_url->portal, iscsi_url->lun) != 0) {
error_setg(errp, "iSCSI: Failed to connect to LUN : %s",
iscsi_get_error(iscsi));
ret = -EINVAL;
goto out;
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
iscsilun->iscsi = iscsi;
iscsilun->lun = iscsi_url->lun;
task = iscsi_inquiry_sync(iscsi, iscsilun->lun, 0, 0, 36);
if (task == NULL || task->status != SCSI_STATUS_GOOD) {
error_setg(errp, "iSCSI: failed to send inquiry command.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
inq = scsi_datain_unmarshall(task);
if (inq == NULL) {
error_setg(errp, "iSCSI: Failed to unmarshall inquiry data.");
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
ret = -EINVAL;
goto out;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
iscsilun->type = inq->periperal_device_type;
iscsilun->has_write_same = true;
iscsi_readcapacity_sync(iscsilun, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
goto out;
}
bs->total_sectors = sector_lun2qemu(iscsilun->num_blocks, iscsilun);
bs->request_alignment = iscsilun->block_size;
/* Medium changer or tape. We dont have any emulation for this so this must
* be sg ioctl compatible. We force it to be sg, otherwise qemu will try
* to read from the device to guess the image format.
*/
if (iscsilun->type == TYPE_MEDIUM_CHANGER ||
iscsilun->type == TYPE_TAPE) {
bs->sg = 1;
}
if (iscsilun->lbpme) {
struct scsi_inquiry_logical_block_provisioning *inq_lbp;
task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING,
errp);
if (task == NULL) {
ret = -EINVAL;
goto out;
}
inq_lbp = scsi_datain_unmarshall(task);
if (inq_lbp == NULL) {
error_setg(errp, "iSCSI: failed to unmarshall inquiry datain blob");
ret = -EINVAL;
goto out;
}
memcpy(&iscsilun->lbp, inq_lbp,
sizeof(struct scsi_inquiry_logical_block_provisioning));
scsi_free_scsi_task(task);
task = NULL;
}
if (iscsilun->lbp.lbpu || iscsilun->lbp.lbpws) {
struct scsi_inquiry_block_limits *inq_bl;
task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1,
SCSI_INQUIRY_PAGECODE_BLOCK_LIMITS, errp);
if (task == NULL) {
ret = -EINVAL;
goto out;
}
inq_bl = scsi_datain_unmarshall(task);
if (inq_bl == NULL) {
error_setg(errp, "iSCSI: failed to unmarshall inquiry datain blob");
ret = -EINVAL;
goto out;
}
memcpy(&iscsilun->bl, inq_bl,
sizeof(struct scsi_inquiry_block_limits));
scsi_free_scsi_task(task);
task = NULL;
}
#if defined(LIBISCSI_FEATURE_NOP_COUNTER)
/* Set up a timer for sending out iSCSI NOPs */
iscsilun->nop_timer = timer_new_ms(QEMU_CLOCK_REALTIME, iscsi_nop_timed_event, iscsilun);
timer_mod(iscsilun->nop_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + NOP_INTERVAL);
#endif
out:
qemu_opts_del(opts);
if (initiator_name != NULL) {
g_free(initiator_name);
}
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
if (iscsi_url != NULL) {
iscsi_destroy_url(iscsi_url);
}
if (task != NULL) {
scsi_free_scsi_task(task);
}
if (ret) {
if (iscsi != NULL) {
iscsi_destroy_context(iscsi);
}
memset(iscsilun, 0, sizeof(IscsiLun));
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
return ret;
}
static void iscsi_close(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
struct iscsi_context *iscsi = iscsilun->iscsi;
if (iscsilun->nop_timer) {
timer_del(iscsilun->nop_timer);
timer_free(iscsilun->nop_timer);
}
qemu_aio_set_fd_handler(iscsi_get_fd(iscsi), NULL, NULL, NULL);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
iscsi_destroy_context(iscsi);
g_free(iscsilun->zeroblock);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
memset(iscsilun, 0, sizeof(IscsiLun));
}
static int iscsi_refresh_limits(BlockDriverState *bs)
{
IscsiLun *iscsilun = bs->opaque;
/* We don't actually refresh here, but just return data queried in
* iscsi_open(): iscsi targets don't change their limits. */
if (iscsilun->lbp.lbpu || iscsilun->lbp.lbpws) {
if (iscsilun->bl.max_unmap < 0xffffffff) {
bs->bl.max_discard = sector_lun2qemu(iscsilun->bl.max_unmap,
iscsilun);
}
bs->bl.discard_alignment = sector_lun2qemu(iscsilun->bl.opt_unmap_gran,
iscsilun);
if (iscsilun->bl.max_ws_len < 0xffffffff) {
bs->bl.max_write_zeroes = sector_lun2qemu(iscsilun->bl.max_ws_len,
iscsilun);
}
bs->bl.write_zeroes_alignment = sector_lun2qemu(iscsilun->bl.opt_unmap_gran,
iscsilun);
}
bs->bl.opt_transfer_length = sector_lun2qemu(iscsilun->bl.opt_xfer_len,
iscsilun);
return 0;
}
/* Since iscsi_open() ignores bdrv_flags, there is nothing to do here in
* prepare. Note that this will not re-establish a connection with an iSCSI
* target - it is effectively a NOP. */
static int iscsi_reopen_prepare(BDRVReopenState *state,
BlockReopenQueue *queue, Error **errp)
{
/* NOP */
return 0;
}
static int iscsi_truncate(BlockDriverState *bs, int64_t offset)
{
IscsiLun *iscsilun = bs->opaque;
Error *local_err = NULL;
if (iscsilun->type != TYPE_DISK) {
return -ENOTSUP;
}
iscsi_readcapacity_sync(iscsilun, &local_err);
if (local_err != NULL) {
error_free(local_err);
return -EIO;
}
if (offset > iscsi_getlength(bs)) {
return -EINVAL;
}
return 0;
}
static int iscsi_create(const char *filename, QEMUOptionParameter *options,
Error **errp)
{
int ret = 0;
int64_t total_size = 0;
BlockDriverState *bs;
IscsiLun *iscsilun = NULL;
QDict *bs_options;
bs = bdrv_new("");
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, "size")) {
total_size = options->value.n / BDRV_SECTOR_SIZE;
}
options++;
}
bs->opaque = g_malloc0(sizeof(struct IscsiLun));
iscsilun = bs->opaque;
bs_options = qdict_new();
qdict_put(bs_options, "filename", qstring_from_str(filename));
ret = iscsi_open(bs, bs_options, 0, NULL);
QDECREF(bs_options);
if (ret != 0) {
goto out;
}
if (iscsilun->nop_timer) {
timer_del(iscsilun->nop_timer);
timer_free(iscsilun->nop_timer);
}
if (iscsilun->type != TYPE_DISK) {
ret = -ENODEV;
goto out;
}
if (bs->total_sectors < total_size) {
ret = -ENOSPC;
goto out;
}
ret = 0;
out:
if (iscsilun->iscsi != NULL) {
iscsi_destroy_context(iscsilun->iscsi);
}
g_free(bs->opaque);
bs->opaque = NULL;
bdrv_unref(bs);
return ret;
}
static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
{
IscsiLun *iscsilun = bs->opaque;
bdi->unallocated_blocks_are_zero = !!iscsilun->lbprz;
bdi->can_write_zeroes_with_unmap = iscsilun->lbprz && iscsilun->lbp.lbpws;
/* Guess the internal cluster (page) size of the iscsi target by the means
* of opt_unmap_gran. Transfer the unmap granularity only if it has a
* reasonable size for bdi->cluster_size */
if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 64 * 1024 &&
iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
bdi->cluster_size = iscsilun->bl.opt_unmap_gran * iscsilun->block_size;
}
return 0;
}
static QEMUOptionParameter iscsi_create_options[] = {
{
.name = BLOCK_OPT_SIZE,
.type = OPT_SIZE,
.help = "Virtual disk size"
},
{ NULL }
};
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
static BlockDriver bdrv_iscsi = {
.format_name = "iscsi",
.protocol_name = "iscsi",
.instance_size = sizeof(IscsiLun),
.bdrv_needs_filename = true,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
.bdrv_file_open = iscsi_open,
.bdrv_close = iscsi_close,
.bdrv_create = iscsi_create,
.create_options = iscsi_create_options,
.bdrv_reopen_prepare = iscsi_reopen_prepare,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
.bdrv_getlength = iscsi_getlength,
.bdrv_get_info = iscsi_get_info,
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
#if defined(LIBISCSI_FEATURE_IOVECTOR)
.bdrv_co_get_block_status = iscsi_co_get_block_status,
#endif
.bdrv_co_discard = iscsi_co_discard,
#if defined(SCSI_SENSE_ASCQ_CAPACITY_DATA_HAS_CHANGED)
.bdrv_co_write_zeroes = iscsi_co_write_zeroes,
#endif
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev = iscsi_co_writev,
.bdrv_co_flush_to_disk = iscsi_co_flush,
#ifdef __linux__
.bdrv_ioctl = iscsi_ioctl,
.bdrv_aio_ioctl = iscsi_aio_ioctl,
#endif
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
};
static QemuOptsList qemu_iscsi_opts = {
.name = "iscsi",
.head = QTAILQ_HEAD_INITIALIZER(qemu_iscsi_opts.head),
.desc = {
{
.name = "user",
.type = QEMU_OPT_STRING,
.help = "username for CHAP authentication to target",
},{
.name = "password",
.type = QEMU_OPT_STRING,
.help = "password for CHAP authentication to target",
},{
.name = "header-digest",
.type = QEMU_OPT_STRING,
.help = "HeaderDigest setting. "
"{CRC32C|CRC32C-NONE|NONE-CRC32C|NONE}",
},{
.name = "initiator-name",
.type = QEMU_OPT_STRING,
.help = "Initiator iqn name to use when connecting",
},
{ /* end of list */ }
},
};
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
static void iscsi_block_init(void)
{
bdrv_register(&bdrv_iscsi);
qemu_add_opts(&qemu_iscsi_opts);
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 08:24:24 +00:00
}
block_init(iscsi_block_init);