xemu/net/net.c

1776 lines
46 KiB
C
Raw Normal View History

/*
* QEMU System Emulator
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "net/net.h"
#include "clients.h"
#include "hub.h"
#include "hw/qdev-properties.h"
#include "net/slirp.h"
#include "net/eth.h"
#include "util.h"
#include "monitor/monitor.h"
#include "qemu/help_option.h"
#include "qapi/qapi-commands-net.h"
#include "qapi/qapi-visit-net.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qemu/error-report.h"
#include "qemu/sockets.h"
#include "qemu/cutils.h"
#include "qemu/config-file.h"
#include "qemu/ctype.h"
#include "qemu/id.h"
#include "qemu/iov.h"
#include "qemu/qemu-print.h"
#include "qemu/main-loop.h"
#include "qemu/option.h"
#include "qapi/error.h"
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
#include "qapi/opts-visitor.h"
#include "sysemu/runstate.h"
Add the function of colo_compare_cleanup This patch fixes the following: #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007f6ae4559859 in __GI_abort () at abort.c:79 #2 0x0000559aaa386720 in error_exit (err=16, msg=0x559aaa5973d0 <__func__.16227> "qemu_mutex_destroy") at util/qemu-thread-posix.c:36 #3 0x0000559aaa3868c5 in qemu_mutex_destroy (mutex=0x559aabffe828) at util/qemu-thread-posix.c:69 #4 0x0000559aaa2f93a8 in char_finalize (obj=0x559aabffe800) at chardev/char.c:285 #5 0x0000559aaa23318a in object_deinit (obj=0x559aabffe800, type=0x559aabfd7d20) at qom/object.c:606 #6 0x0000559aaa2331b8 in object_deinit (obj=0x559aabffe800, type=0x559aabfd9060) at qom/object.c:610 #7 0x0000559aaa233200 in object_finalize (data=0x559aabffe800) at qom/object.c:620 #8 0x0000559aaa234202 in object_unref (obj=0x559aabffe800) at qom/object.c:1074 #9 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0dac10, name=0x559aac778760 "compare0-0", opaque=0x559aabffe800) at qom/object.c:1584 #10 0x0000559aaa232f70 in object_property_del_all (obj=0x559aac0dac10) at qom/object.c:557 #11 0x0000559aaa2331ed in object_finalize (data=0x559aac0dac10) at qom/object.c:619 #12 0x0000559aaa234202 in object_unref (obj=0x559aac0dac10) at qom/object.c:1074 #13 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0c75c0, name=0x559aac0dadc0 "chardevs", opaque=0x559aac0dac10) at qom/object.c:1584 #14 0x0000559aaa233071 in object_property_del_child (obj=0x559aac0c75c0, child=0x559aac0dac10, errp=0x0) at qom/object.c:580 #15 0x0000559aaa233155 in object_unparent (obj=0x559aac0dac10) at qom/object.c:599 #16 0x0000559aaa2fb721 in qemu_chr_cleanup () at chardev/char.c:1159 #17 0x0000559aa9f9b110 in main (argc=54, argv=0x7ffeb62fa998, envp=0x7ffeb62fab50) at vl.c:4539 When chardev is cleaned up, chr_write_lock needs to be destroyed. But the colo-compare module is not cleaned up normally before it when the guest poweroff. It is holding chr_write_lock at this time. This will cause qemu crash.So we add the function of colo_compare_cleanup() before qemu_chr_cleanup() to fix the bug. Signed-off-by: Lei Rao <lei.rao@intel.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-08 08:23:30 +00:00
#include "net/colo-compare.h"
#include "net/filter.h"
#include "qapi/string-output-visitor.h"
/* Net bridge is currently not supported for W32. */
#if !defined(_WIN32)
# define CONFIG_NET_BRIDGE
#endif
static VMChangeStateEntry *net_change_state_entry;
static QTAILQ_HEAD(, NetClientState) net_clients;
/***********************************************************/
/* network device redirectors */
int parse_host_port(struct sockaddr_in *saddr, const char *str,
Error **errp)
{
gchar **substrings;
struct hostent *he;
const char *addr, *p, *r;
int port, ret = 0;
memset(saddr, 0, sizeof(*saddr));
substrings = g_strsplit(str, ":", 2);
if (!substrings || !substrings[0] || !substrings[1]) {
error_setg(errp, "host address '%s' doesn't contain ':' "
"separating host from port", str);
ret = -1;
goto out;
}
addr = substrings[0];
p = substrings[1];
saddr->sin_family = AF_INET;
if (addr[0] == '\0') {
saddr->sin_addr.s_addr = 0;
} else {
if (qemu_isdigit(addr[0])) {
if (!inet_aton(addr, &saddr->sin_addr)) {
error_setg(errp, "host address '%s' is not a valid "
"IPv4 address", addr);
ret = -1;
goto out;
}
} else {
he = gethostbyname(addr);
if (he == NULL) {
error_setg(errp, "can't resolve host address '%s'", addr);
ret = -1;
goto out;
}
saddr->sin_addr = *(struct in_addr *)he->h_addr;
}
}
port = strtol(p, (char **)&r, 0);
if (r == p) {
error_setg(errp, "port number '%s' is invalid", p);
ret = -1;
goto out;
}
saddr->sin_port = htons(port);
out:
g_strfreev(substrings);
return ret;
}
char *qemu_mac_strdup_printf(const uint8_t *macaddr)
{
return g_strdup_printf("%.2x:%.2x:%.2x:%.2x:%.2x:%.2x",
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
void qemu_format_nic_info_str(NetClientState *nc, uint8_t macaddr[6])
{
snprintf(nc->info_str, sizeof(nc->info_str),
"model=%s,macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
nc->model,
macaddr[0], macaddr[1], macaddr[2],
macaddr[3], macaddr[4], macaddr[5]);
}
static int mac_table[256] = {0};
static void qemu_macaddr_set_used(MACAddr *macaddr)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]++;
}
}
}
static void qemu_macaddr_set_free(MACAddr *macaddr)
{
int index;
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
}
for (index = 0x56; index < 0xFF; index++) {
if (macaddr->a[5] == index) {
mac_table[index]--;
}
}
}
static int qemu_macaddr_get_free(void)
{
int index;
for (index = 0x56; index < 0xFF; index++) {
if (mac_table[index] == 0) {
return index;
}
}
return -1;
}
void qemu_macaddr_default_if_unset(MACAddr *macaddr)
{
static const MACAddr zero = { .a = { 0,0,0,0,0,0 } };
static const MACAddr base = { .a = { 0x52, 0x54, 0x00, 0x12, 0x34, 0 } };
if (memcmp(macaddr, &zero, sizeof(zero)) != 0) {
if (memcmp(macaddr->a, &base.a, (sizeof(base.a) - 1)) != 0) {
return;
} else {
qemu_macaddr_set_used(macaddr);
return;
}
}
macaddr->a[0] = 0x52;
macaddr->a[1] = 0x54;
macaddr->a[2] = 0x00;
macaddr->a[3] = 0x12;
macaddr->a[4] = 0x34;
macaddr->a[5] = qemu_macaddr_get_free();
qemu_macaddr_set_used(macaddr);
}
/**
* Generate a name for net client
*
* Only net clients created with the legacy -net option and NICs need this.
*/
static char *assign_name(NetClientState *nc1, const char *model)
{
NetClientState *nc;
int id = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc == nc1) {
continue;
}
if (strcmp(nc->model, model) == 0) {
id++;
}
}
return g_strdup_printf("%s.%d", model, id);
}
static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
}
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque);
static void qemu_net_client_setup(NetClientState *nc,
NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name,
NetClientDestructor *destructor,
bool is_datapath)
{
nc->info = info;
nc->model = g_strdup(model);
if (name) {
nc->name = g_strdup(name);
} else {
nc->name = assign_name(nc, model);
}
if (peer) {
assert(!peer->peer);
nc->peer = peer;
peer->peer = nc;
}
QTAILQ_INSERT_TAIL(&net_clients, nc, next);
nc->incoming_queue = qemu_new_net_queue(qemu_deliver_packet_iov, nc);
nc->destructor = destructor;
nc->is_datapath = is_datapath;
QTAILQ_INIT(&nc->filters);
}
NetClientState *qemu_new_net_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name)
{
NetClientState *nc;
assert(info->size >= sizeof(NetClientState));
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
qemu_net_client_destructor, true);
return nc;
}
NetClientState *qemu_new_net_control_client(NetClientInfo *info,
NetClientState *peer,
const char *model,
const char *name)
{
NetClientState *nc;
assert(info->size >= sizeof(NetClientState));
nc = g_malloc0(info->size);
qemu_net_client_setup(nc, info, peer, model, name,
qemu_net_client_destructor, false);
return nc;
}
NICState *qemu_new_nic(NetClientInfo *info,
NICConf *conf,
const char *model,
const char *name,
void *opaque)
{
NetClientState **peers = conf->peers.ncs;
NICState *nic;
int i, queues = MAX(1, conf->peers.queues);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
assert(info->type == NET_CLIENT_DRIVER_NIC);
assert(info->size >= sizeof(NICState));
nic = g_malloc0(info->size + sizeof(NetClientState) * queues);
nic->ncs = (void *)nic + info->size;
nic->conf = conf;
nic->opaque = opaque;
for (i = 0; i < queues; i++) {
qemu_net_client_setup(&nic->ncs[i], info, peers[i], model, name,
NULL, true);
nic->ncs[i].queue_index = i;
}
return nic;
}
NetClientState *qemu_get_subqueue(NICState *nic, int queue_index)
{
return nic->ncs + queue_index;
}
NetClientState *qemu_get_queue(NICState *nic)
{
return qemu_get_subqueue(nic, 0);
}
NICState *qemu_get_nic(NetClientState *nc)
{
NetClientState *nc0 = nc - nc->queue_index;
return (NICState *)((void *)nc0 - nc->info->size);
}
void *qemu_get_nic_opaque(NetClientState *nc)
{
NICState *nic = qemu_get_nic(nc);
return nic->opaque;
}
NetClientState *qemu_get_peer(NetClientState *nc, int queue_index)
{
assert(nc != NULL);
NetClientState *ncs = nc + queue_index;
return ncs->peer;
}
static void qemu_cleanup_net_client(NetClientState *nc)
{
QTAILQ_REMOVE(&net_clients, nc, next);
if (nc->info->cleanup) {
nc->info->cleanup(nc);
}
}
static void qemu_free_net_client(NetClientState *nc)
{
if (nc->incoming_queue) {
qemu_del_net_queue(nc->incoming_queue);
}
if (nc->peer) {
nc->peer->peer = NULL;
}
g_free(nc->name);
g_free(nc->model);
if (nc->destructor) {
nc->destructor(nc);
}
}
void qemu_del_net_client(NetClientState *nc)
{
NetClientState *ncs[MAX_QUEUE_NUM];
int queues, i;
NetFilterState *nf, *next;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
assert(nc->info->type != NET_CLIENT_DRIVER_NIC);
/* If the NetClientState belongs to a multiqueue backend, we will change all
* other NetClientStates also.
*/
queues = qemu_find_net_clients_except(nc->name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues != 0);
QTAILQ_FOREACH_SAFE(nf, &nc->filters, next, next) {
object_unparent(OBJECT(nf));
}
/* If there is a peer NIC, delete and cleanup client, but do not free. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
NICState *nic = qemu_get_nic(nc->peer);
if (nic->peer_deleted) {
return;
}
nic->peer_deleted = true;
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = true;
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
}
return;
}
for (i = 0; i < queues; i++) {
qemu_cleanup_net_client(ncs[i]);
qemu_free_net_client(ncs[i]);
}
}
void qemu_del_nic(NICState *nic)
{
int i, queues = MAX(nic->conf->peers.queues, 1);
qemu_macaddr_set_free(&nic->conf->macaddr);
for (i = 0; i < queues; i++) {
NetClientState *nc = qemu_get_subqueue(nic, i);
/* If this is a peer NIC and peer has already been deleted, free it now. */
if (nic->peer_deleted) {
qemu_free_net_client(nc->peer);
} else if (nc->peer) {
/* if there are RX packets pending, complete them */
qemu_purge_queued_packets(nc->peer);
}
}
for (i = queues - 1; i >= 0; i--) {
NetClientState *nc = qemu_get_subqueue(nic, i);
qemu_cleanup_net_client(nc);
qemu_free_net_client(nc);
}
g_free(nic);
}
void qemu_foreach_nic(qemu_nic_foreach func, void *opaque)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
if (nc->queue_index == 0) {
func(qemu_get_nic(nc), opaque);
}
}
}
}
bool qemu_has_ufo(NetClientState *nc)
{
if (!nc || !nc->info->has_ufo) {
return false;
}
return nc->info->has_ufo(nc);
}
bool qemu_has_vnet_hdr(NetClientState *nc)
{
if (!nc || !nc->info->has_vnet_hdr) {
return false;
}
return nc->info->has_vnet_hdr(nc);
}
bool qemu_has_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->has_vnet_hdr_len) {
return false;
}
return nc->info->has_vnet_hdr_len(nc, len);
}
void qemu_using_vnet_hdr(NetClientState *nc, bool enable)
{
if (!nc || !nc->info->using_vnet_hdr) {
return;
}
nc->info->using_vnet_hdr(nc, enable);
}
void qemu_set_offload(NetClientState *nc, int csum, int tso4, int tso6,
int ecn, int ufo)
{
if (!nc || !nc->info->set_offload) {
return;
}
nc->info->set_offload(nc, csum, tso4, tso6, ecn, ufo);
}
void qemu_set_vnet_hdr_len(NetClientState *nc, int len)
{
if (!nc || !nc->info->set_vnet_hdr_len) {
return;
}
nc->vnet_hdr_len = len;
nc->info->set_vnet_hdr_len(nc, len);
}
int qemu_set_vnet_le(NetClientState *nc, bool is_le)
{
#if HOST_BIG_ENDIAN
if (!nc || !nc->info->set_vnet_le) {
return -ENOSYS;
}
return nc->info->set_vnet_le(nc, is_le);
#else
return 0;
#endif
}
int qemu_set_vnet_be(NetClientState *nc, bool is_be)
{
#if HOST_BIG_ENDIAN
return 0;
#else
if (!nc || !nc->info->set_vnet_be) {
return -ENOSYS;
}
return nc->info->set_vnet_be(nc, is_be);
#endif
}
int qemu_can_receive_packet(NetClientState *nc)
{
if (nc->receive_disabled) {
return 0;
} else if (nc->info->can_receive &&
!nc->info->can_receive(nc)) {
return 0;
}
return 1;
}
int qemu_can_send_packet(NetClientState *sender)
{
int vm_running = runstate_is_running();
if (!vm_running) {
return 0;
}
if (!sender->peer) {
return 1;
}
return qemu_can_receive_packet(sender->peer);
}
static ssize_t filter_receive_iov(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
NetPacketSent *sent_cb)
{
ssize_t ret = 0;
NetFilterState *nf = NULL;
if (direction == NET_FILTER_DIRECTION_TX) {
QTAILQ_FOREACH(nf, &nc->filters, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
} else {
QTAILQ_FOREACH_REVERSE(nf, &nc->filters, next) {
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
return ret;
}
}
}
return ret;
}
static ssize_t filter_receive(NetClientState *nc,
NetFilterDirection direction,
NetClientState *sender,
unsigned flags,
const uint8_t *data,
size_t size,
NetPacketSent *sent_cb)
{
struct iovec iov = {
.iov_base = (void *)data,
.iov_len = size
};
return filter_receive_iov(nc, direction, sender, flags, &iov, 1, sent_cb);
}
void qemu_purge_queued_packets(NetClientState *nc)
{
if (!nc->peer) {
return;
}
qemu_net_queue_purge(nc->peer->incoming_queue, nc);
}
void qemu_flush_or_purge_queued_packets(NetClientState *nc, bool purge)
{
nc->receive_disabled = 0;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_HUBPORT) {
if (net_hub_flush(nc->peer)) {
qemu_notify_event();
}
}
if (qemu_net_queue_flush(nc->incoming_queue)) {
/* We emptied the queue successfully, signal to the IO thread to repoll
* the file descriptor (for tap, for example).
*/
qemu_notify_event();
} else if (purge) {
/* Unable to empty the queue, purge remaining packets */
qemu_net_queue_purge(nc->incoming_queue, nc->peer);
}
}
void qemu_flush_queued_packets(NetClientState *nc)
{
qemu_flush_or_purge_queued_packets(nc, false);
}
static ssize_t qemu_send_packet_async_with_flags(NetClientState *sender,
unsigned flags,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
NetQueue *queue;
int ret;
#ifdef DEBUG_NET
printf("qemu_send_packet_async:\n");
qemu_hexdump(stdout, "net", buf, size);
#endif
if (sender->link_down || !sender->peer) {
return size;
}
/* Let filters handle the packet first */
ret = filter_receive(sender, NET_FILTER_DIRECTION_TX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive(sender->peer, NET_FILTER_DIRECTION_RX,
sender, flags, buf, size, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send(queue, sender, flags, buf, size, sent_cb);
}
ssize_t qemu_send_packet_async(NetClientState *sender,
const uint8_t *buf, int size,
NetPacketSent *sent_cb)
{
return qemu_send_packet_async_with_flags(sender, QEMU_NET_PACKET_FLAG_NONE,
buf, size, sent_cb);
}
ssize_t qemu_send_packet(NetClientState *nc, const uint8_t *buf, int size)
{
return qemu_send_packet_async(nc, buf, size, NULL);
}
ssize_t qemu_receive_packet(NetClientState *nc, const uint8_t *buf, int size)
{
if (!qemu_can_receive_packet(nc)) {
return 0;
}
return qemu_net_queue_receive(nc->incoming_queue, buf, size);
}
ssize_t qemu_receive_packet_iov(NetClientState *nc, const struct iovec *iov,
int iovcnt)
{
if (!qemu_can_receive_packet(nc)) {
return 0;
}
return qemu_net_queue_receive_iov(nc->incoming_queue, iov, iovcnt);
}
ssize_t qemu_send_packet_raw(NetClientState *nc, const uint8_t *buf, int size)
{
return qemu_send_packet_async_with_flags(nc, QEMU_NET_PACKET_FLAG_RAW,
buf, size, NULL);
}
static ssize_t nc_sendv_compat(NetClientState *nc, const struct iovec *iov,
int iovcnt, unsigned flags)
{
uint8_t *buf = NULL;
uint8_t *buffer;
size_t offset;
ssize_t ret;
if (iovcnt == 1) {
buffer = iov[0].iov_base;
offset = iov[0].iov_len;
} else {
offset = iov_size(iov, iovcnt);
if (offset > NET_BUFSIZE) {
return -1;
}
buf = g_malloc(offset);
buffer = buf;
offset = iov_to_buf(iov, iovcnt, 0, buf, offset);
}
if (flags & QEMU_NET_PACKET_FLAG_RAW && nc->info->receive_raw) {
ret = nc->info->receive_raw(nc, buffer, offset);
} else {
ret = nc->info->receive(nc, buffer, offset);
}
g_free(buf);
return ret;
}
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
static ssize_t qemu_deliver_packet_iov(NetClientState *sender,
unsigned flags,
const struct iovec *iov,
int iovcnt,
void *opaque)
{
NetClientState *nc = opaque;
int ret;
if (nc->link_down) {
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
return iov_size(iov, iovcnt);
}
if (nc->receive_disabled) {
return 0;
}
if (nc->info->receive_iov && !(flags & QEMU_NET_PACKET_FLAG_RAW)) {
ret = nc->info->receive_iov(nc, iov, iovcnt);
} else {
ret = nc_sendv_compat(nc, iov, iovcnt, flags);
}
if (ret == 0) {
nc->receive_disabled = 1;
}
return ret;
}
ssize_t qemu_sendv_packet_async(NetClientState *sender,
const struct iovec *iov, int iovcnt,
NetPacketSent *sent_cb)
{
NetQueue *queue;
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
size_t size = iov_size(iov, iovcnt);
int ret;
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
if (size > NET_BUFSIZE) {
return size;
}
if (sender->link_down || !sender->peer) {
net: drop too large packet early We try to detect and drop too large packet (>INT_MAX) in 1592a9947036 ("net: ignore packet size greater than INT_MAX") during packet delivering. Unfortunately, this is not sufficient as we may hit another integer overflow when trying to queue such large packet in qemu_net_queue_append_iov(): - size of the allocation may overflow on 32bit - packet->size is integer which may overflow even on 64bit Fixing this by moving the check to qemu_sendv_packet_async() which is the entrance of all networking codes and reduce the limit to NET_BUFSIZE to be more conservative. This works since: - For the callers that call qemu_sendv_packet_async() directly, they only care about if zero is returned to determine whether to prevent the source from producing more packets. A callback will be triggered if peer can accept more then source could be enabled. This is usually used by high speed networking implementation like virtio-net or netmap. - For the callers that call qemu_sendv_packet() that calls qemu_sendv_packet_async() indirectly, they often ignore the return value. In this case qemu will just the drop packets if peer can't receive. Qemu will copy the packet if it was queued. So it was safe for both kinds of the callers to assume the packet was sent. Since we move the check from qemu_deliver_packet_iov() to qemu_sendv_packet_async(), it would be safer to make qemu_deliver_packet_iov() static to prevent any external user in the future. This is a revised patch of CVE-2018-17963. Cc: qemu-stable@nongnu.org Cc: Li Qiang <liq3ea@163.com> Fixes: 1592a9947036 ("net: ignore packet size greater than INT_MAX") Reported-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20181204035347.6148-2-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-04 03:53:43 +00:00
return size;
}
/* Let filters handle the packet first */
ret = filter_receive_iov(sender, NET_FILTER_DIRECTION_TX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
ret = filter_receive_iov(sender->peer, NET_FILTER_DIRECTION_RX, sender,
QEMU_NET_PACKET_FLAG_NONE, iov, iovcnt, sent_cb);
if (ret) {
return ret;
}
queue = sender->peer->incoming_queue;
return qemu_net_queue_send_iov(queue, sender,
QEMU_NET_PACKET_FLAG_NONE,
iov, iovcnt, sent_cb);
}
ssize_t
qemu_sendv_packet(NetClientState *nc, const struct iovec *iov, int iovcnt)
{
return qemu_sendv_packet_async(nc, iov, iovcnt, NULL);
}
NetClientState *qemu_find_netdev(const char *id)
{
NetClientState *nc;
QTAILQ_FOREACH(nc, &net_clients, next) {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC)
Fix netdev name lookup in -device, device_add, netdev_del qemu_find_netdev() looks up members of non_vlan_clients by name. It happily returns the first match. Trouble is the names need not be unique. non_vlan_clients contains host parts (netdevs) and guest parts (NICs). Netdevs have unique names: a netdev's name is a (mandatory) qemu_netdev_opts ID, and these are unique. NIC names are not unique. If a NIC has a qdev ID (which is unique), that's its name. Else, we make up a name. The made-up names are unique, but they can clash with qdev IDs. Even if NICs had unique names, they could still clash with netdev names. Callers of qemu_find_netdev(): * net_init_nic() wants a netdev. It happens to work because it runs before NICs get added to non_vlan_clients. * do_netdev_del() wants a netdev. If it gets a NIC, it complains and fails. Bug: a netdev with the same name that comes later in non_vlan_clients can't be deleted: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -netdev user,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=virtio1 [...] (qemu) netdev_add user,id=virtio1 (qemu) info network Devices not on any VLAN: hostnet0: net=10.0.2.0, restricted=n peer=virtio1 virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=hostnet0 virtio1: net=10.0.2.0, restricted=n (qemu) netdev_del virtio1 Device 'virtio1' not found * parse_netdev() wants a netdev. If it gets a NIC, it gets confused. With the test setup above: (qemu) device_add virtio-net-pci,netdev=virtio1 Property 'virtio-net-pci.netdev' can't take value 'virtio1', it's in use You can even connect two NICs to each other: $ qemu-system-x86_64 -nodefaults -vnc :0 -S -monitor stdio -device virtio-net-pci,id=virtio1 -device e1000,netdev=virtio1 [...] Devices not on any VLAN: virtio1: model=virtio-net-pci,macaddr=52:54:00:12:34:56 peer=e1000.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:57 peer=virtio1 (qemu) q Segmentation fault (core dumped) * do_set_link() works fine for both netdevs and NICs. Whether it really makes sense for netdevs is debatable, but that's outside this patch's scope. Change qemu_find_netdev() to return only netdevs. This fixes the netdev_del and device_add/-device bugs demonstrated above. To avoid changing set_link, make do_set_link() search non_vlan_clients by hand instead of calling qemu_find_netdev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-16 16:45:37 +00:00
continue;
if (!strcmp(nc->name, id)) {
return nc;
}
}
return NULL;
}
int qemu_find_net_clients_except(const char *id, NetClientState **ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
NetClientDriver type, int max)
{
NetClientState *nc;
int ret = 0;
QTAILQ_FOREACH(nc, &net_clients, next) {
if (nc->info->type == type) {
continue;
}
if (!id || !strcmp(nc->name, id)) {
if (ret < max) {
ncs[ret] = nc;
}
ret++;
}
}
return ret;
}
static int nic_get_free_idx(void)
{
int index;
for (index = 0; index < MAX_NICS; index++)
if (!nd_table[index].used)
return index;
return -1;
}
int qemu_show_nic_models(const char *arg, const char *const *models)
{
int i;
if (!arg || !is_help_option(arg)) {
return 0;
}
printf("Supported NIC models:\n");
for (i = 0 ; models[i]; i++) {
printf("%s\n", models[i]);
}
return 1;
}
void qemu_check_nic_model(NICInfo *nd, const char *model)
{
const char *models[2];
models[0] = model;
models[1] = NULL;
if (qemu_show_nic_models(nd->model, models))
exit(0);
if (qemu_find_nic_model(nd, models, model) < 0)
exit(1);
}
int qemu_find_nic_model(NICInfo *nd, const char * const *models,
const char *default_model)
{
int i;
if (!nd->model)
nd->model = g_strdup(default_model);
for (i = 0 ; models[i]; i++) {
if (strcmp(nd->model, models[i]) == 0)
return i;
}
error_report("Unsupported NIC model: %s", nd->model);
return -1;
}
static int net_init_nic(const Netdev *netdev, const char *name,
NetClientState *peer, Error **errp)
{
int idx;
NICInfo *nd;
const NetLegacyNicOptions *nic;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
assert(netdev->type == NET_CLIENT_DRIVER_NIC);
nic = &netdev->u.nic;
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
error_setg(errp, "too many NICs");
return -1;
}
nd = &nd_table[idx];
memset(nd, 0, sizeof(*nd));
if (nic->has_netdev) {
nd->netdev = qemu_find_netdev(nic->netdev);
if (!nd->netdev) {
error_setg(errp, "netdev '%s' not found", nic->netdev);
return -1;
}
} else {
assert(peer);
nd->netdev = peer;
}
nd->name = g_strdup(name);
if (nic->has_model) {
nd->model = g_strdup(nic->model);
}
if (nic->has_addr) {
nd->devaddr = g_strdup(nic->addr);
}
if (nic->has_macaddr &&
net_parse_macaddr(nd->macaddr.a, nic->macaddr) < 0) {
error_setg(errp, "invalid syntax for ethernet address");
return -1;
}
if (nic->has_macaddr &&
is_multicast_ether_addr(nd->macaddr.a)) {
error_setg(errp,
"NIC cannot have multicast MAC address (odd 1st byte)");
return -1;
}
qemu_macaddr_default_if_unset(&nd->macaddr);
if (nic->has_vectors) {
if (nic->vectors > 0x7ffffff) {
error_setg(errp, "invalid # of vectors: %"PRIu32, nic->vectors);
return -1;
}
nd->nvectors = nic->vectors;
} else {
nd->nvectors = DEV_NVECTORS_UNSPECIFIED;
}
nd->used = 1;
nb_nics++;
return idx;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
static int (* const net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
const Netdev *netdev,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
const char *name,
NetClientState *peer, Error **errp) = {
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_NIC] = net_init_nic,
#ifdef CONFIG_SLIRP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_USER] = net_init_slirp,
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_TAP] = net_init_tap,
[NET_CLIENT_DRIVER_SOCKET] = net_init_socket,
#ifdef CONFIG_VDE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_VDE] = net_init_vde,
#endif
#ifdef CONFIG_NETMAP
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_NETMAP] = net_init_netmap,
#endif
#ifdef CONFIG_NET_BRIDGE
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_BRIDGE] = net_init_bridge,
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
#endif
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_HUBPORT] = net_init_hubport,
#ifdef CONFIG_VHOST_NET_USER
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_VHOST_USER] = net_init_vhost_user,
#endif
#ifdef CONFIG_VHOST_NET_VDPA
[NET_CLIENT_DRIVER_VHOST_VDPA] = net_init_vhost_vdpa,
#endif
#ifdef CONFIG_L2TPV3
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
[NET_CLIENT_DRIVER_L2TPV3] = net_init_l2tpv3,
#endif
#ifdef CONFIG_VMNET
[NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
[NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
[NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
#endif /* CONFIG_VMNET */
};
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
static int net_client_init1(const Netdev *netdev, bool is_netdev, Error **errp)
{
NetClientState *peer = NULL;
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 10:02:20 +00:00
NetClientState *nc;
if (is_netdev) {
if (netdev->type == NET_CLIENT_DRIVER_NIC ||
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
!net_client_init_fun[netdev->type]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
"a netdev backend type");
return -1;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
} else {
if (netdev->type == NET_CLIENT_DRIVER_NONE) {
return 0; /* nothing to do */
}
if (netdev->type == NET_CLIENT_DRIVER_HUBPORT ||
!net_client_init_fun[netdev->type]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "type",
"a net backend type (maybe it is not compiled "
"into this binary)");
return -1;
}
/* Do not add to a hub if it's a nic with a netdev= parameter. */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (netdev->type != NET_CLIENT_DRIVER_NIC ||
!netdev->u.nic.has_netdev) {
peer = net_hub_add_port(0, NULL, NULL);
}
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 10:02:20 +00:00
nc = qemu_find_netdev(netdev->id);
if (nc) {
error_setg(errp, "Duplicate ID '%s'", netdev->id);
return -1;
}
if (net_client_init_fun[netdev->type](netdev, netdev->id, peer, errp) < 0) {
/* FIXME drop when all init functions store an Error */
if (errp && !*errp) {
error_setg(errp, "Device '%s' could not be initialized",
NetClientDriver_str(netdev->type));
}
return -1;
}
if (is_netdev) {
nc = qemu_find_netdev(netdev->id);
assert(nc);
nc->is_netdev = true;
}
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
return 0;
}
void show_netdevs(void)
{
int idx;
const char *available_netdevs[] = {
"socket",
"hubport",
"tap",
#ifdef CONFIG_SLIRP
"user",
#endif
#ifdef CONFIG_L2TPV3
"l2tpv3",
#endif
#ifdef CONFIG_VDE
"vde",
#endif
#ifdef CONFIG_NET_BRIDGE
"bridge",
#endif
#ifdef CONFIG_NETMAP
"netmap",
#endif
#ifdef CONFIG_POSIX
"vhost-user",
#endif
#ifdef CONFIG_VHOST_VDPA
"vhost-vdpa",
#endif
#ifdef CONFIG_VMNET
"vmnet-host",
"vmnet-shared",
"vmnet-bridged",
#endif
};
qemu_printf("Available netdev backend types:\n");
for (idx = 0; idx < ARRAY_SIZE(available_netdevs); idx++) {
qemu_printf("%s\n", available_netdevs[idx]);
}
}
static int net_client_init(QemuOpts *opts, bool is_netdev, Error **errp)
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
{
gchar **substrings = NULL;
Netdev *object = NULL;
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
int ret = -1;
Visitor *v = opts_visitor_new(opts);
/* Parse convenience option format ip6-net=fec0::0[/64] */
const char *ip6_net = qemu_opt_get(opts, "ipv6-net");
if (ip6_net) {
char *prefix_addr;
unsigned long prefix_len = 64; /* Default 64bit prefix length. */
substrings = g_strsplit(ip6_net, "/", 2);
if (!substrings || !substrings[0]) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "ipv6-net",
"a valid IPv6 prefix");
goto out;
}
prefix_addr = substrings[0];
/* Handle user-specified prefix length. */
if (substrings[1] &&
qemu_strtoul(substrings[1], NULL, 10, &prefix_len))
{
error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
"ipv6-prefixlen", "a number");
goto out;
}
qemu_opt_set(opts, "ipv6-prefix", prefix_addr, &error_abort);
qemu_opt_set_number(opts, "ipv6-prefixlen", prefix_len,
&error_abort);
qemu_opt_unset(opts, "ipv6-net");
}
/* Create an ID for -net if the user did not specify one */
if (!is_netdev && !qemu_opts_id(opts)) {
qemu_opts_set_id(opts, id_generate(ID_NET));
}
if (visit_type_Netdev(v, NULL, &object, errp)) {
ret = net_client_init1(object, is_netdev, errp);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
}
qapi_free_Netdev(object);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
out:
g_strfreev(substrings);
visit_free(v);
convert net_client_init() to OptsVisitor The net_client_init() prototype is kept intact. Based on "is_netdev", the QemuOpts-rooted QemuOpt-list is parsed as a Netdev or a NetLegacy. The original meat of net_client_init() is moved to and simplified in net_client_init1(): Fields not common between -net and -netdev are clearly separated. Getting the name for the init functions is cleaner: Netdev::id is mandatory, and all init functions handle a NULL NetLegacy::name. NetLegacy::vlan explicitly depends on -net (see below). Verifying the "type=" option for -netdev can be turned into a switch. Format validation with qemu_opts_validate() can be removed because the visitor covers it. Relatedly, the "net_client_types" array is reduced to an array of init functions that can be directly indexed by opts->kind. (Help text is available in the schema JSON.) The outermost negation in the condition around qemu_find_vlan() was flattened, because it expresses the dependent code's requirements more clearly. VLAN lookup is avoided if there's no init function to pass the VLAN to. Whenever the value of type=... is needed, we substitute NetClientOptionsKind_lookup[kind]. The individual init functions are not converted yet, thus the original QemuOpts instance is passed transparently. v1->v2: - NetLegacy::name is optional. Tracked it through all init functions: they all handle a NULL name. Updated commit message accordingly. v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17 14:17:13 +00:00
return ret;
}
void netdev_add(QemuOpts *opts, Error **errp)
{
net_client_init(opts, true, errp);
}
net: Complete qapi-fication of netdev_add We've had all the required pieces for doing a type-safe representation of netdev_add as a flat union for quite some time now (since 0e55c381f6 in v2.7.0, released in 2016), but did not make the final switch to using it because of concern about whether a command-line regression in accepting "1" in place of 1 for integer arguments would be problematic. Back then, we did not have the deprecation cycle to allow us to make progress. But now that we have waited so long, other problems have crept in: for example, our desire to add qemu-storage-daemon is hampered by the inability to express net objects, and we are unable to introspect what we actually accept. Additionally, our round-trip through QemuOpts silently eats any argument that expands to an array, rendering dnssearch, hostfwd, and guestfwd useless through QMP: {"execute": "netdev_add", "arguments": { "id": "netdev0", "type": "user", "dnssearch": [ { "str": "8.8.8.8" }, { "str": "8.8.4.4" } ]}} So without further ado, let's turn on proper QAPI. netdev_add() was a trivial wrapper around net_client_init(), which did a few steps prior to calling net_client_init1(); with this patch, we now skip directly to net_client_init1(). In addition to fixing array parameters, the following additional differences occur: - {"execute": "netdev_add", "arguments": {"type": "help"}} no longer attempts to print help to stdout and exit. Bug fix, broken in 547203ead4 'net: List available netdevs with "-netdev help"', v2.12.0. - {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }} no longer attempts to desugar the undocumented ipv6-net magic string into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses", v2.6.0. - {'execute':'netdev_add', 'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}} {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}} Used to succeed: since our command line treats everything as strings, our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost the original typing and turned everything into a string; now that we skip the QemuOpts, the JSON input has to match the exact QAPI type. But this stricter QMP is desirable, and introspection is sufficient for any affected applications to make sure they use it correctly. In qmp_netdev_add(), we still have to create a QemuOpts object so that qmp_netdev_del() will be able to remove a hotplugged network device; but the opts->head remains empty since we now manage all parsing through the QAPI object rather than QemuOpts; a separate patch will address the abuse of QemuOpts as a witness for whether a NetClientState is a netdev. In the meantime, our argument that we are okay requires auditing all uses of option group "netdev": - qemu_netdev_opts: option group definition, empty .desc[] - CLI (CLI netdev parsing ends before monitors start, so while monitors can mess with CLI netdevs, CLI cannot mess with monitor netdevs): - main() case QEMU_OPTION_netdev: store CLI definition - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig: similar, dealing only with CLI - net_init_clients(): Pass CLI to net_client_init() - Monitor: - hmp_netdev_add(): straightforward parse into net_client_init() - qmp_netdev_add(): subject of this patch, used to add full object to option group, now just adds bare-bones id - qmp_netdev_del(), netdev_del_completion(): check the option group solely for id, as a 'is this a netdev' predicate Reported-by: Alex Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317201711.322764-2-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message typo fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 20:17:10 +00:00
void qmp_netdev_add(Netdev *netdev, Error **errp)
{
if (!id_wellformed(netdev->id)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "id", "an identifier");
return;
}
net_client_init1(netdev, true, errp);
}
void qmp_netdev_del(const char *id, Error **errp)
{
NetClientState *nc;
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 10:02:20 +00:00
QemuOpts *opts;
nc = qemu_find_netdev(id);
if (!nc) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", id);
return;
}
if (!nc->is_netdev) {
error_setg(errp, "Device '%s' is not a netdev", id);
return;
}
qemu_del_net_client(nc);
net: Fix handling of id in netdev_add and netdev_del CLI -netdev accumulates in option group "netdev". Before commit 08712fcb85 "net: Track netdevs in NetClientState rather than QemuOpt", netdev_add added to the option group, and netdev_del removed from it, both HMP and QMP. Thus, every netdev had a corresponding QemuOpts in this option group. Commit 08712fcb85 dropped this for QMP netdev_add and both netdev_del. Now a netdev has a corresponding QemuOpts only when it was created with CLI or HMP. Two issues: * QMP and HMP netdev_del can leave QemuOpts behind, breaking HMP netdev_add. Reproducer: $ qemu-system-x86_64 -S -display none -nodefaults -monitor stdio QEMU 5.1.92 monitor - type 'help' for more information (qemu) netdev_add user,id=net0 (qemu) info network net0: index=0,type=user,net=10.0.2.0,restrict=off (qemu) netdev_del net0 (qemu) info network (qemu) netdev_add user,id=net0 upstream-qemu: Duplicate ID 'net0' for netdev Try "help netdev_add" for more information Fix by restoring the QemuOpts deletion in qmp_netdev_del(), but with a guard, because the QemuOpts need not exist. * QMP netdev_add loses its "no duplicate ID" check. Reproducer: $ qemu-system-x86_64 -S -display none -qmp stdio {"QMP": {"version": {"qemu": {"micro": 92, "minor": 1, "major": 5}, "package": "v5.2.0-rc2-1-g02c1f0142c"}, "capabilities": ["oob"]}} {"execute": "qmp_capabilities"} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} {"execute": "netdev_add", "arguments": {"type": "user", "id":"net0"}} {"return": {}} Fix by adding a duplicate ID check to net_client_init1() to replace the lost one. The check is redundant for callers where QemuOpts still checks, i.e. for CLI and HMP. Reported-by: Andrew Melnichenko <andrew@daynix.com> Fixes: 08712fcb851034228b61f75bd922863a984a4f60 Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-25 10:02:20 +00:00
/*
* Wart: we need to delete the QemuOpts associated with netdevs
* created via CLI or HMP, to avoid bogus "Duplicate ID" errors in
* HMP netdev_add.
*/
opts = qemu_opts_find(qemu_find_opts("netdev"), id);
if (opts) {
qemu_opts_del(opts);
}
}
static void netfilter_print_info(Monitor *mon, NetFilterState *nf)
{
char *str;
ObjectProperty *prop;
ObjectPropertyIterator iter;
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:43 +00:00
Visitor *v;
/* generate info str */
object_property_iter_init(&iter, OBJECT(nf));
while ((prop = object_property_iter_next(&iter))) {
if (!strcmp(prop->name, "type")) {
continue;
}
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:43 +00:00
v = string_output_visitor_new(false, &str);
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 16:05:54 +00:00
object_property_get(OBJECT(nf), prop->name, v, NULL);
qapi: Add new visit_complete() function Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-09 16:48:43 +00:00
visit_complete(v, &str);
visit_free(v);
monitor_printf(mon, ",%s=%s", prop->name, str);
g_free(str);
}
monitor_printf(mon, "\n");
}
void print_net_client(Monitor *mon, NetClientState *nc)
{
NetFilterState *nf;
monitor_printf(mon, "%s: index=%d,type=%s,%s\n", nc->name,
nc->queue_index,
NetClientDriver_str(nc->info->type),
nc->info_str);
if (!QTAILQ_EMPTY(&nc->filters)) {
monitor_printf(mon, "filters:\n");
}
QTAILQ_FOREACH(nf, &nc->filters, next) {
monitor_printf(mon, " - %s: type=%s",
object_get_canonical_path_component(OBJECT(nf)),
object_get_typename(OBJECT(nf)));
netfilter_print_info(mon, nf);
}
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
RxFilterInfoList *qmp_query_rx_filter(bool has_name, const char *name,
Error **errp)
{
NetClientState *nc;
RxFilterInfoList *filter_list = NULL, **tail = &filter_list;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
QTAILQ_FOREACH(nc, &net_clients, next) {
RxFilterInfo *info;
if (has_name && strcmp(nc->name, name) != 0) {
continue;
}
/* only query rx-filter information of NIC */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->info->type != NET_CLIENT_DRIVER_NIC) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
if (has_name) {
error_setg(errp, "net client(%s) isn't a NIC", name);
assert(!filter_list);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
}
continue;
}
/* only query information on queue 0 since the info is per nic,
* not per queue
*/
if (nc->queue_index != 0)
continue;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
if (nc->info->query_rx_filter) {
info = nc->info->query_rx_filter(nc);
QAPI_LIST_APPEND(tail, info);
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
} else if (has_name) {
error_setg(errp, "net client(%s) doesn't support"
" rx-filter querying", name);
assert(!filter_list);
return NULL;
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
}
if (has_name) {
break;
}
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
}
if (filter_list == NULL && has_name) {
net: add support of mac-programming over macvtap in QEMU side Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-14 07:45:52 +00:00
error_setg(errp, "invalid net client name: %s", name);
}
return filter_list;
}
void hmp_info_network(Monitor *mon, const QDict *qdict)
{
NetClientState *nc, *peer;
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
NetClientDriver type;
net_hub_info(mon);
QTAILQ_FOREACH(nc, &net_clients, next) {
peer = nc->peer;
type = nc->info->type;
/* Skip if already printed in hub info */
if (net_hub_id_for_client(nc, NULL) == 0) {
continue;
}
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (!peer || type == NET_CLIENT_DRIVER_NIC) {
print_net_client(mon, nc);
} /* else it's a netdev connected to a NIC, printed with the NIC */
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (peer && type == NET_CLIENT_DRIVER_NIC) {
monitor_printf(mon, " \\ ");
print_net_client(mon, peer);
}
}
}
void colo_notify_filters_event(int event, Error **errp)
{
NetClientState *nc;
NetFilterState *nf;
NetFilterClass *nfc = NULL;
Error *local_err = NULL;
QTAILQ_FOREACH(nc, &net_clients, next) {
QTAILQ_FOREACH(nf, &nc->filters, next) {
nfc = NETFILTER_GET_CLASS(OBJECT(nf));
nfc->handle_event(nf, event, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
}
}
}
void qmp_set_link(const char *name, bool up, Error **errp)
{
NetClientState *ncs[MAX_QUEUE_NUM];
NetClientState *nc;
int queues, i;
queues = qemu_find_net_clients_except(name, ncs,
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
NET_CLIENT_DRIVER__MAX,
MAX_QUEUE_NUM);
if (queues == 0) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", name);
return;
}
nc = ncs[0];
for (i = 0; i < queues; i++) {
ncs[i]->link_down = !up;
}
if (nc->info->link_status_changed) {
nc->info->link_status_changed(nc);
}
if (nc->peer) {
/* Change peer link only if the peer is NIC and then notify peer.
* If the peer is a HUBPORT or a backend, we do not change the
* link status.
*
* This behavior is compatible with qemu hubs where there could be
* multiple clients that can still communicate with each other in
* disconnected mode. For now maintain this compatibility.
*/
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
for (i = 0; i < queues; i++) {
ncs[i]->peer->link_down = !up;
}
}
if (nc->peer->info->link_status_changed) {
nc->peer->info->link_status_changed(nc->peer);
}
}
}
static void net_vm_change_state_handler(void *opaque, bool running,
RunState state)
{
NetClientState *nc;
NetClientState *tmp;
QTAILQ_FOREACH_SAFE(nc, &net_clients, next, tmp) {
if (running) {
/* Flush queued packets and wake up backends. */
if (nc->peer && qemu_can_send_packet(nc)) {
qemu_flush_queued_packets(nc->peer);
}
} else {
/* Complete all queued packets, to guarantee we don't modify
* state later when VM is not running.
*/
qemu_flush_or_purge_queued_packets(nc, true);
}
}
}
void net_cleanup(void)
{
NetClientState *nc;
Add the function of colo_compare_cleanup This patch fixes the following: #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007f6ae4559859 in __GI_abort () at abort.c:79 #2 0x0000559aaa386720 in error_exit (err=16, msg=0x559aaa5973d0 <__func__.16227> "qemu_mutex_destroy") at util/qemu-thread-posix.c:36 #3 0x0000559aaa3868c5 in qemu_mutex_destroy (mutex=0x559aabffe828) at util/qemu-thread-posix.c:69 #4 0x0000559aaa2f93a8 in char_finalize (obj=0x559aabffe800) at chardev/char.c:285 #5 0x0000559aaa23318a in object_deinit (obj=0x559aabffe800, type=0x559aabfd7d20) at qom/object.c:606 #6 0x0000559aaa2331b8 in object_deinit (obj=0x559aabffe800, type=0x559aabfd9060) at qom/object.c:610 #7 0x0000559aaa233200 in object_finalize (data=0x559aabffe800) at qom/object.c:620 #8 0x0000559aaa234202 in object_unref (obj=0x559aabffe800) at qom/object.c:1074 #9 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0dac10, name=0x559aac778760 "compare0-0", opaque=0x559aabffe800) at qom/object.c:1584 #10 0x0000559aaa232f70 in object_property_del_all (obj=0x559aac0dac10) at qom/object.c:557 #11 0x0000559aaa2331ed in object_finalize (data=0x559aac0dac10) at qom/object.c:619 #12 0x0000559aaa234202 in object_unref (obj=0x559aac0dac10) at qom/object.c:1074 #13 0x0000559aaa2356b6 in object_finalize_child_property (obj=0x559aac0c75c0, name=0x559aac0dadc0 "chardevs", opaque=0x559aac0dac10) at qom/object.c:1584 #14 0x0000559aaa233071 in object_property_del_child (obj=0x559aac0c75c0, child=0x559aac0dac10, errp=0x0) at qom/object.c:580 #15 0x0000559aaa233155 in object_unparent (obj=0x559aac0dac10) at qom/object.c:599 #16 0x0000559aaa2fb721 in qemu_chr_cleanup () at chardev/char.c:1159 #17 0x0000559aa9f9b110 in main (argc=54, argv=0x7ffeb62fa998, envp=0x7ffeb62fab50) at vl.c:4539 When chardev is cleaned up, chr_write_lock needs to be destroyed. But the colo-compare module is not cleaned up normally before it when the guest poweroff. It is holding chr_write_lock at this time. This will cause qemu crash.So we add the function of colo_compare_cleanup() before qemu_chr_cleanup() to fix the bug. Signed-off-by: Lei Rao <lei.rao@intel.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-08 08:23:30 +00:00
/*cleanup colo compare module for COLO*/
colo_compare_cleanup();
/* We may del multiple entries during qemu_del_net_client(),
* so QTAILQ_FOREACH_SAFE() is also not safe here.
*/
while (!QTAILQ_EMPTY(&net_clients)) {
nc = QTAILQ_FIRST(&net_clients);
qapi: Change Netdev into a flat union This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-14 03:50:23 +00:00
if (nc->info->type == NET_CLIENT_DRIVER_NIC) {
qemu_del_nic(qemu_get_nic(nc));
} else {
qemu_del_net_client(nc);
}
}
qemu_del_vm_change_state_handler(net_change_state_entry);
}
void net_check_clients(void)
{
NetClientState *nc;
int i;
net_hub_check_clients();
QTAILQ_FOREACH(nc, &net_clients, next) {
if (!nc->peer) {
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 19:52:53 +00:00
warn_report("%s %s has no peer",
nc->info->type == NET_CLIENT_DRIVER_NIC
? "nic" : "netdev",
nc->name);
}
}
/* Check that all NICs requested via -net nic actually got created.
* NICs created via -device don't need to be checked here because
* they are always instantiated.
*/
for (i = 0; i < MAX_NICS; i++) {
NICInfo *nd = &nd_table[i];
if (nd->used && !nd->instantiated) {
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 19:52:53 +00:00
warn_report("requested NIC (%s, model %s) "
"was not created (not supported by this machine?)",
nd->name ? nd->name : "anonymous",
nd->model ? nd->model : "unspecified");
}
}
}
static int net_init_client(void *dummy, QemuOpts *opts, Error **errp)
{
return net_client_init(opts, false, errp);
}
static int net_init_netdev(void *dummy, QemuOpts *opts, Error **errp)
{
const char *type = qemu_opt_get(opts, "type");
if (type && is_help_option(type)) {
show_netdevs();
exit(0);
}
return net_client_init(opts, true, errp);
}
/* For the convenience "--nic" parameter */
static int net_param_nic(void *dummy, QemuOpts *opts, Error **errp)
{
char *mac, *nd_id;
int idx, ret;
NICInfo *ni;
const char *type;
type = qemu_opt_get(opts, "type");
if (type && g_str_equal(type, "none")) {
return 0; /* Nothing to do, default_net is cleared in vl.c */
}
idx = nic_get_free_idx();
if (idx == -1 || nb_nics >= MAX_NICS) {
error_setg(errp, "no more on-board/default NIC slots available");
return -1;
}
if (!type) {
qemu_opt_set(opts, "type", "user", &error_abort);
}
ni = &nd_table[idx];
memset(ni, 0, sizeof(*ni));
ni->model = qemu_opt_get_del(opts, "model");
/* Create an ID if the user did not specify one */
nd_id = g_strdup(qemu_opts_id(opts));
if (!nd_id) {
nd_id = id_generate(ID_NET);
qemu_opts_set_id(opts, nd_id);
}
/* Handle MAC address */
mac = qemu_opt_get_del(opts, "mac");
if (mac) {
ret = net_parse_macaddr(ni->macaddr.a, mac);
g_free(mac);
if (ret) {
error_setg(errp, "invalid syntax for ethernet address");
goto out;
}
if (is_multicast_ether_addr(ni->macaddr.a)) {
error_setg(errp, "NIC cannot have multicast MAC address");
ret = -1;
goto out;
}
}
qemu_macaddr_default_if_unset(&ni->macaddr);
ret = net_client_init(opts, true, errp);
if (ret == 0) {
ni->netdev = qemu_find_netdev(nd_id);
ni->used = true;
nb_nics++;
}
out:
g_free(nd_id);
return ret;
}
int net_init_clients(Error **errp)
{
net_change_state_entry =
qemu_add_vm_change_state_handler(net_vm_change_state_handler, NULL);
QTAILQ_INIT(&net_clients);
if (qemu_opts_foreach(qemu_find_opts("netdev"),
net_init_netdev, NULL, errp)) {
return -1;
}
if (qemu_opts_foreach(qemu_find_opts("nic"), net_param_nic, NULL, errp)) {
return -1;
}
if (qemu_opts_foreach(qemu_find_opts("net"), net_init_client, NULL, errp)) {
return -1;
}
return 0;
}
int net_client_parse(QemuOptsList *opts_list, const char *optarg)
{
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 11:50:26 +00:00
if (!qemu_opts_parse_noisily(opts_list, optarg, true)) {
return -1;
}
return 0;
}
/* From FreeBSD */
/* XXX: optimize */
uint32_t net_crc32(const uint8_t *p, int len)
{
uint32_t crc;
int carry, i, j;
uint8_t b;
crc = 0xffffffff;
for (i = 0; i < len; i++) {
b = *p++;
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
crc <<= 1;
b >>= 1;
if (carry) {
crc = ((crc ^ POLYNOMIAL_BE) | carry);
}
}
}
return crc;
}
uint32_t net_crc32_le(const uint8_t *p, int len)
{
uint32_t crc;
int carry, i, j;
uint8_t b;
crc = 0xffffffff;
for (i = 0; i < len; i++) {
b = *p++;
for (j = 0; j < 8; j++) {
carry = (crc & 0x1) ^ (b & 0x01);
crc >>= 1;
b >>= 1;
if (carry) {
crc ^= POLYNOMIAL_LE;
}
}
}
return crc;
}
QemuOptsList qemu_netdev_opts = {
.name = "netdev",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_netdev_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_nic_opts = {
.name = "nic",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_nic_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_net_opts = {
.name = "net",
.implied_opt_name = "type",
.head = QTAILQ_HEAD_INITIALIZER(qemu_net_opts.head),
.desc = {
/*
* no elements => accept any params
* validation will happen later
*/
{ /* end of list */ }
},
};
void net_socket_rs_init(SocketReadState *rs,
SocketReadStateFinalize *finalize,
bool vnet_hdr)
{
rs->state = 0;
rs->vnet_hdr = vnet_hdr;
rs->index = 0;
rs->packet_len = 0;
rs->vnet_hdr_len = 0;
memset(rs->buf, 0, sizeof(rs->buf));
rs->finalize = finalize;
}
/*
* Returns
* 0: success
* -1: error occurs
*/
int net_fill_rstate(SocketReadState *rs, const uint8_t *buf, int size)
{
unsigned int l;
while (size > 0) {
/* Reassemble a packet from the network.
* 0 = getting length.
* 1 = getting vnet header length.
* 2 = getting data.
*/
switch (rs->state) {
case 0:
l = 4 - rs->index;
if (l > size) {
l = size;
}
memcpy(rs->buf + rs->index, buf, l);
buf += l;
size -= l;
rs->index += l;
if (rs->index == 4) {
/* got length */
rs->packet_len = ntohl(*(uint32_t *)rs->buf);
rs->index = 0;
if (rs->vnet_hdr) {
rs->state = 1;
} else {
rs->state = 2;
rs->vnet_hdr_len = 0;
}
}
break;
case 1:
l = 4 - rs->index;
if (l > size) {
l = size;
}
memcpy(rs->buf + rs->index, buf, l);
buf += l;
size -= l;
rs->index += l;
if (rs->index == 4) {
/* got vnet header length */
rs->vnet_hdr_len = ntohl(*(uint32_t *)rs->buf);
rs->index = 0;
rs->state = 2;
}
break;
case 2:
l = rs->packet_len - rs->index;
if (l > size) {
l = size;
}
if (rs->index + l <= sizeof(rs->buf)) {
memcpy(rs->buf + rs->index, buf, l);
} else {
fprintf(stderr, "serious error: oversized packet received,"
"connection terminated.\n");
rs->index = rs->state = 0;
return -1;
}
rs->index += l;
buf += l;
size -= l;
if (rs->index >= rs->packet_len) {
rs->index = 0;
rs->state = 0;
assert(rs->finalize);
rs->finalize(rs);
}
break;
}
}
assert(size == 0);
return 0;
}