xemu/target/xtensa/cpu.c

232 lines
7.2 KiB
C
Raw Normal View History

/*
* QEMU Xtensa CPU
*
* Copyright (c) 2011, Max Filippov, Open Source and Linux Lab.
* Copyright (c) 2012 SUSE LINUX Products GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the Open Source and Linux Lab nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "qemu/osdep.h"
2016-03-14 08:01:28 +00:00
#include "qapi/error.h"
#include "cpu.h"
#include "fpu/softfloat.h"
#include "qemu/module.h"
#include "migration/vmstate.h"
static void xtensa_cpu_set_pc(CPUState *cs, vaddr value)
{
XtensaCPU *cpu = XTENSA_CPU(cs);
cpu->env.pc = value;
}
static bool xtensa_cpu_has_work(CPUState *cs)
{
#ifndef CONFIG_USER_ONLY
XtensaCPU *cpu = XTENSA_CPU(cs);
return !cpu->env.runstall && cpu->env.pending_irq_level;
#else
return true;
#endif
}
#ifdef CONFIG_USER_ONLY
static bool abi_call0;
void xtensa_set_abi_call0(void)
{
abi_call0 = true;
}
bool xtensa_abi_call0(void)
{
return abi_call0;
}
#endif
cpu: Use DeviceClass reset instead of a special CPUClass reset The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-03-03 10:05:11 +00:00
static void xtensa_cpu_reset(DeviceState *dev)
{
cpu: Use DeviceClass reset instead of a special CPUClass reset The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-03-03 10:05:11 +00:00
CPUState *s = CPU(dev);
XtensaCPU *cpu = XTENSA_CPU(s);
XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(cpu);
CPUXtensaState *env = &cpu->env;
bool dfpu = xtensa_option_enabled(env->config,
XTENSA_OPTION_DFP_COPROCESSOR);
cpu: Use DeviceClass reset instead of a special CPUClass reset The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-03-03 10:05:11 +00:00
xcc->parent_reset(dev);
env->exception_taken = 0;
env->pc = env->config->exception_vector[EXC_RESET0 + env->static_vectors];
env->sregs[LITBASE] &= ~1;
#ifndef CONFIG_USER_ONLY
env->sregs[PS] = xtensa_option_enabled(env->config,
XTENSA_OPTION_INTERRUPT) ? 0x1f : 0x10;
env->pending_irq_level = 0;
#else
env->sregs[PS] = PS_UM | (3 << PS_RING_SHIFT);
if (xtensa_option_enabled(env->config,
XTENSA_OPTION_WINDOWED_REGISTER) &&
!xtensa_abi_call0()) {
env->sregs[PS] |= PS_WOE;
}
env->sregs[CPENABLE] = 0xff;
#endif
env->sregs[VECBASE] = env->config->vecbase;
env->sregs[IBREAKENABLE] = 0;
env->sregs[MEMCTL] = MEMCTL_IL0EN & env->config->memctl_mask;
env->sregs[ATOMCTL] = xtensa_option_enabled(env->config,
XTENSA_OPTION_ATOMCTL) ? 0x28 : 0x15;
env->sregs[CONFIGID0] = env->config->configid[0];
env->sregs[CONFIGID1] = env->config->configid[1];
env->exclusive_addr = -1;
#ifndef CONFIG_USER_ONLY
reset_mmu(env);
s->halted = env->runstall;
#endif
set_no_signaling_nans(!dfpu, &env->fp_status);
set_use_first_nan(!dfpu, &env->fp_status);
}
static ObjectClass *xtensa_cpu_class_by_name(const char *cpu_model)
{
ObjectClass *oc;
char *typename;
typename = g_strdup_printf(XTENSA_CPU_TYPE_NAME("%s"), cpu_model);
oc = object_class_by_name(typename);
g_free(typename);
if (oc == NULL || !object_class_dynamic_cast(oc, TYPE_XTENSA_CPU) ||
object_class_is_abstract(oc)) {
return NULL;
}
return oc;
}
static void xtensa_cpu_disas_set_info(CPUState *cs, disassemble_info *info)
{
XtensaCPU *cpu = XTENSA_CPU(cs);
info->private_data = cpu->env.config->isa;
info->print_insn = print_insn_xtensa;
}
static void xtensa_cpu_realizefn(DeviceState *dev, Error **errp)
{
CPUState *cs = CPU(dev);
XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(dev);
Error *local_err = NULL;
#ifndef CONFIG_USER_ONLY
xtensa_irq_init(&XTENSA_CPU(dev)->env);
#endif
cpu_exec_realizefn(cs, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return;
}
cs->gdb_num_regs = xcc->config->gdb_regmap.num_regs;
qemu_init_vcpu(cs);
xcc->parent_realize(dev, errp);
}
static void xtensa_cpu_initfn(Object *obj)
{
XtensaCPU *cpu = XTENSA_CPU(obj);
XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(obj);
CPUXtensaState *env = &cpu->env;
cpu_set_cpustate_pointers(cpu);
env->config = xcc->config;
#ifndef CONFIG_USER_ONLY
env->address_space_er = g_malloc(sizeof(*env->address_space_er));
env->system_er = g_malloc(sizeof(*env->system_er));
memory_region_init_io(env->system_er, obj, NULL, env, "er",
UINT64_C(0x100000000));
address_space_init(env->address_space_er, env->system_er, "ER");
#endif
}
static const VMStateDescription vmstate_xtensa_cpu = {
.name = "cpu",
.unmigratable = 1,
};
static void xtensa_cpu_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
CPUClass *cc = CPU_CLASS(oc);
XtensaCPUClass *xcc = XTENSA_CPU_CLASS(cc);
device_class_set_parent_realize(dc, xtensa_cpu_realizefn,
&xcc->parent_realize);
cpu: Use DeviceClass reset instead of a special CPUClass reset The CPUClass has a 'reset' method. This is a legacy from when TYPE_CPU used not to inherit from TYPE_DEVICE. We don't need it any more, as we can simply use the TYPE_DEVICE reset. The 'cpu_reset()' function is kept as the API which most places use to reset a CPU; it is now a wrapper which calls device_cold_reset() and then the tracepoint function. This change should not cause CPU objects to be reset more often than they are at the moment, because: * nobody is directly calling device_cold_reset() or qdev_reset_all() on CPU objects * no CPU object is on a qbus, so they will not be reset either by somebody calling qbus_reset_all()/bus_cold_reset(), or by the main "reset sysbus and everything in the qbus tree" reset that most devices are reset by Note that this does not change the need for each machine or whatever to use qemu_register_reset() to arrange to call cpu_reset() -- that is necessary because CPU objects are not on any qbus, so they don't get reset when the qbus tree rooted at the sysbus bus is reset, and this isn't being changed here. All the changes to the files under target/ were made using the included Coccinelle script, except: (1) the deletion of the now-inaccurate and not terribly useful "CPUClass::reset" comments was done with a perl one-liner afterwards: perl -n -i -e '/ CPUClass::reset/ or print' target/*/*.c (2) this bit of the s390 change was done by hand, because the Coccinelle script is not sophisticated enough to handle the parent_reset call being inside another function: | @@ -96,8 +96,9 @@ static void s390_cpu_reset(CPUState *s, cpu_reset_type type) | S390CPU *cpu = S390_CPU(s); | S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); | CPUS390XState *env = &cpu->env; |+ DeviceState *dev = DEVICE(s); | |- scc->parent_reset(s); |+ scc->parent_reset(dev); | cpu->env.sigp_order = 0; | s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu); Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200303100511.5498-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-03-03 10:05:11 +00:00
device_class_set_parent_reset(dc, xtensa_cpu_reset, &xcc->parent_reset);
cc->class_by_name = xtensa_cpu_class_by_name;
cc->has_work = xtensa_cpu_has_work;
cc->do_interrupt = xtensa_cpu_do_interrupt;
cc->tcg_ops.cpu_exec_interrupt = xtensa_cpu_exec_interrupt;
cc->dump_state = xtensa_cpu_dump_state;
cc->set_pc = xtensa_cpu_set_pc;
cc->gdb_read_register = xtensa_cpu_gdb_read_register;
cc->gdb_write_register = xtensa_cpu_gdb_write_register;
cc->gdb_stop_before_watchpoint = true;
cc->tcg_ops.tlb_fill = xtensa_cpu_tlb_fill;
#ifndef CONFIG_USER_ONLY
cc->do_unaligned_access = xtensa_cpu_do_unaligned_access;
cc->get_phys_page_debug = xtensa_cpu_get_phys_page_debug;
cc->do_transaction_failed = xtensa_cpu_do_transaction_failed;
#endif
cc->debug_excp_handler = xtensa_breakpoint_handler;
cc->disas_set_info = xtensa_cpu_disas_set_info;
cc->tcg_ops.initialize = xtensa_translate_init;
dc->vmsd = &vmstate_xtensa_cpu;
}
static const TypeInfo xtensa_cpu_type_info = {
.name = TYPE_XTENSA_CPU,
.parent = TYPE_CPU,
.instance_size = sizeof(XtensaCPU),
.instance_init = xtensa_cpu_initfn,
.abstract = true,
.class_size = sizeof(XtensaCPUClass),
.class_init = xtensa_cpu_class_init,
};
static void xtensa_cpu_register_types(void)
{
type_register_static(&xtensa_cpu_type_info);
}
type_init(xtensa_cpu_register_types)