xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-24 20:19:44 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

ivshmem: Receive shared memory synchronously in realize()

Browse Source 
When configured for interrupts (property "chardev" given), we receive
the shared memory from an ivshmem server.  We do so asynchronously
after realize() completes, by setting up callbacks with
qemu_chr_add_handlers().

Keeping server I/O out of realize() that way avoids delays due to a
slow server.  This is probably relevant only for hot plug.

However, this funny "no shared memory, yet" state of the device also
causes a raft of issues that are hard or impossible to work around:

* The guest is exposed to this state: when we enter and leave it its
  shared memory contents is apruptly replaced, and device register
  IVPosition changes.

  This is a known issue.  We document that guests should not access
  the shared memory after device initialization until the IVPosition
  register becomes non-negative.

  For cold plug, the funny state is unlikely to be visible in
  practice, because we normally receive the shared memory long before
  the guest gets around to mess with the device.

  For hot plug, the timing is tighter, but the relative slowness of
  PCI device configuration has a good chance to hide the funny state.

  In either case, guests complying with the documented procedure are
  safe.

* Migration becomes racy.

  If migration completes before the shared memory setup completes on
  the source, shared memory contents is silently lost.  Fortunately,
  migration is rather unlikely to win this race.

  If the shared memory's ramblock arrives at the destination before
  shared memory setup completes, migration fails.

  There is no known way for a management application to wait for
  shared memory setup to complete.

  All you can do is retry failed migration.  You can improve your
  chances by leaving more time between running the destination QEMU
  and the migrate command.

  To mitigate silent memory loss, you need to ensure the server
  initializes shared memory exactly the same on source and
  destination.

  These issues are entirely undocumented so far.

I'd expect the server to be almost always fast enough to hide these
issues.  But then rare catastrophic races are in a way the worst kind.

This is way more trouble than I'm willing to take from any device.
Kill the funny state by receiving shared memory synchronously in
realize().  If your hot plug hangs, go kill your ivshmem server.

For easier review, this commit only makes the receive synchronous, it
doesn't add the necessary error propagation.  Without that, the funny
state persists.  The next commit will do that, and kill it off for
real.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-26-git-send-email-armbru@redhat.com>
This commit is contained in:
Markus Armbruster 2016-03-15 19:34:40 +01:00
parent 9db51b4d64
commit 3a55fc0f24
2 changed files with 55 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

68
hw/misc/ivshmem.c
View File

@ -675,27 +675,45 @@ static void ivshmem_read(void *opaque, const uint8_t *buf, int size)
process_msg(s, msg, fd);
}
static void ivshmem_check_version(void *opaque, const uint8_t * buf, int size)
static int64_t ivshmem_recv_msg(IVShmemState *s, int *pfd)
{
IVShmemState *s = opaque;
int tmp;
int64_t version;
int64_t msg;
int n, ret;
if (!fifo_update_and_get_i64(s, buf, size, &version)) {
return;
}
n = 0;
do {
ret = qemu_chr_fe_read_all(s->server_chr, (uint8_t *)&msg + n,
sizeof(msg) - n);
if (ret < 0 && ret != -EINTR) {
/* TODO error handling */
return INT64_MIN;
}
n += ret;
} while (n < sizeof(msg));
tmp = qemu_chr_fe_get_msgfd(s->server_chr);
if (tmp != -1 || version != IVSHMEM_PROTOCOL_VERSION) {
*pfd = qemu_chr_fe_get_msgfd(s->server_chr);
return msg;
}
static void ivshmem_recv_setup(IVShmemState *s)
{
int64_t msg;
int fd;
msg = ivshmem_recv_msg(s, &fd);
if (fd != -1 || msg != IVSHMEM_PROTOCOL_VERSION) {
fprintf(stderr, "incompatible version, you are connecting to a ivshmem-"
"server using a different protocol please check your setup\n");
qemu_chr_add_handlers(s->server_chr, NULL, NULL, NULL, s);
return;
}
IVSHMEM_DPRINTF("version check ok, switch to real chardev handler\n");
qemu_chr_add_handlers(s->server_chr, ivshmem_can_receive, ivshmem_read,
NULL, s);
/*
* Receive more messages until we got shared memory.
*/
do {
msg = ivshmem_recv_msg(s, &fd);
process_msg(s, msg, fd);
} while (msg != -1);
}
/* Select the MSI-X vectors used by device.
@ -900,19 +918,29 @@ static void pci_ivshmem_realize(PCIDevice *dev, Error **errp)
IVSHMEM_DPRINTF("using shared memory server (socket = %s)\n",
s->server_chr->filename);
if (ivshmem_setup_interrupts(s) < 0) {
error_setg(errp, "failed to initialize interrupts");
return;
}
/* we allocate enough space for 16 peers and grow as needed */
resize_peers(s, 16);
s->vm_id = -1;
pci_register_bar(dev, 2, attr, &s->bar);
qemu_chr_add_handlers(s->server_chr, ivshmem_can_receive,
ivshmem_check_version, NULL, s);
/*
* Receive setup messages from server synchronously.
* Older versions did it asynchronously, but that creates a
* number of entertaining race conditions.
* TODO Propagate errors! Without that, we still have races
* on errors.
*/
ivshmem_recv_setup(s);
if (memory_region_is_mapped(&s->ivshmem)) {
qemu_chr_add_handlers(s->server_chr, ivshmem_can_receive,
ivshmem_read, NULL, s);
}
if (ivshmem_setup_interrupts(s) < 0) {
error_setg(errp, "failed to initialize interrupts");
return;
}
} else {
/* just map the file immediately, we're not using a server */
int fd;

26
tests/ivshmem-test.c
View File

@ -309,35 +309,23 @@ static void test_ivshmem_server(bool msi)
ret = ivshmem_server_start(&server);
g_assert_cmpint(ret, ==, 0);
setup_vm_with_server(&state1, nvectors, msi);
s1 = &state1;
setup_vm_with_server(&state2, nvectors, msi);
s2 = &state2;
/* check state before server sends stuff */
g_assert_cmpuint(in_reg(s1, IVPOSITION), ==, 0xffffffff);
g_assert_cmpuint(in_reg(s2, IVPOSITION), ==, 0xffffffff);
g_assert_cmpuint(qtest_readb(s1->qtest, (uintptr_t)s1->mem_base), ==, 0x00);
thread.server = &server;
ret = pipe(thread.pipe);
g_assert_cmpint(ret, ==, 0);
thread.thread = g_thread_new("ivshmem-server", server_thread, &thread);
g_assert(thread.thread != NULL);
/* waiting for devices to become operational */
while (g_get_monotonic_time() < end_time) {
g_usleep(1000);
if ((int)in_reg(s1, IVPOSITION) >= 0 &&
(int)in_reg(s2, IVPOSITION) >= 0) {
break;
}
}
setup_vm_with_server(&state1, nvectors, msi);
s1 = &state1;
setup_vm_with_server(&state2, nvectors, msi);
s2 = &state2;
/* check got different VM ids */
vm1 = in_reg(s1, IVPOSITION);
vm2 = in_reg(s2, IVPOSITION);
g_assert_cmpuint(vm1, !=, vm2);
g_assert_cmpint(vm1, >=, 0);
g_assert_cmpint(vm2, >=, 0);
g_assert_cmpint(vm1, !=, vm2);
/* check number of MSI-X vectors */
global_qtest = s1->qtest;