mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-23 19:49:43 +00:00
hw/i2c/bitbang_i2c: Use in-place rather than malloc'd bitbang_i2c_interface struct
Currently the bitbang_i2c_init() function allocates a bitbang_i2c_interface struct which it returns. This is unfortunate because it means that if the function is used from a DeviceState init method then the memory will be leaked by an "init then delete" cycle, as used by the qmp/hmp commands that list device properties. Since three out of four of the uses of this function are in device init methods, switch the function to do an in-place initialization of a struct that can be embedded in the device state struct of the caller. This fixes LeakSanitizer leak warnings that have appeared in the patchew configuration (which only tries to run the sanitizers for the x86_64-softmmu target) now that we use the bitbang-i2c code in an x86-64 config. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190702163844.20458-1-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit is contained in:
parent
b0ee78ff31
commit
41742927ee
@ -538,7 +538,7 @@ static void ati_mm_write(void *opaque, hwaddr addr,
|
||||
break;
|
||||
case GPIO_DVI_DDC:
|
||||
if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF) {
|
||||
s->regs.gpio_dvi_ddc = ati_i2c(s->bbi2c, data, 0);
|
||||
s->regs.gpio_dvi_ddc = ati_i2c(&s->bbi2c, data, 0);
|
||||
}
|
||||
break;
|
||||
case GPIO_MONID ... GPIO_MONID + 3:
|
||||
@ -554,7 +554,7 @@ static void ati_mm_write(void *opaque, hwaddr addr,
|
||||
*/
|
||||
if ((s->regs.gpio_monid & BIT(25)) &&
|
||||
addr <= GPIO_MONID + 2 && addr + size > GPIO_MONID + 2) {
|
||||
s->regs.gpio_monid = ati_i2c(s->bbi2c, s->regs.gpio_monid, 1);
|
||||
s->regs.gpio_monid = ati_i2c(&s->bbi2c, s->regs.gpio_monid, 1);
|
||||
}
|
||||
}
|
||||
break;
|
||||
@ -856,7 +856,7 @@ static void ati_vga_realize(PCIDevice *dev, Error **errp)
|
||||
|
||||
/* ddc, edid */
|
||||
I2CBus *i2cbus = i2c_init_bus(DEVICE(s), "ati-vga.ddc");
|
||||
s->bbi2c = bitbang_i2c_init(i2cbus);
|
||||
bitbang_i2c_init(&s->bbi2c, i2cbus);
|
||||
I2CSlave *i2cddc = I2C_SLAVE(qdev_create(BUS(i2cbus), TYPE_I2CDDC));
|
||||
i2c_set_slave_address(i2cddc, 0x50);
|
||||
|
||||
@ -885,7 +885,6 @@ static void ati_vga_exit(PCIDevice *dev)
|
||||
ATIVGAState *s = ATI_VGA(dev);
|
||||
|
||||
graphic_console_close(s->vga.con);
|
||||
g_free(s->bbi2c);
|
||||
}
|
||||
|
||||
static Property ati_vga_properties[] = {
|
||||
|
@ -88,7 +88,7 @@ typedef struct ATIVGAState {
|
||||
uint16_t cursor_size;
|
||||
uint32_t cursor_offset;
|
||||
QEMUCursor *cursor;
|
||||
bitbang_i2c_interface *bbi2c;
|
||||
bitbang_i2c_interface bbi2c;
|
||||
MemoryRegion io;
|
||||
MemoryRegion mm;
|
||||
ATIVGARegs regs;
|
||||
|
@ -25,39 +25,6 @@ do { printf("bitbang_i2c: " fmt , ## __VA_ARGS__); } while (0)
|
||||
#define DPRINTF(fmt, ...) do {} while(0)
|
||||
#endif
|
||||
|
||||
typedef enum bitbang_i2c_state {
|
||||
STOPPED = 0,
|
||||
SENDING_BIT7,
|
||||
SENDING_BIT6,
|
||||
SENDING_BIT5,
|
||||
SENDING_BIT4,
|
||||
SENDING_BIT3,
|
||||
SENDING_BIT2,
|
||||
SENDING_BIT1,
|
||||
SENDING_BIT0,
|
||||
WAITING_FOR_ACK,
|
||||
RECEIVING_BIT7,
|
||||
RECEIVING_BIT6,
|
||||
RECEIVING_BIT5,
|
||||
RECEIVING_BIT4,
|
||||
RECEIVING_BIT3,
|
||||
RECEIVING_BIT2,
|
||||
RECEIVING_BIT1,
|
||||
RECEIVING_BIT0,
|
||||
SENDING_ACK,
|
||||
SENT_NACK
|
||||
} bitbang_i2c_state;
|
||||
|
||||
struct bitbang_i2c_interface {
|
||||
I2CBus *bus;
|
||||
bitbang_i2c_state state;
|
||||
int last_data;
|
||||
int last_clock;
|
||||
int device_out;
|
||||
uint8_t buffer;
|
||||
int current_addr;
|
||||
};
|
||||
|
||||
static void bitbang_i2c_enter_stop(bitbang_i2c_interface *i2c)
|
||||
{
|
||||
DPRINTF("STOP\n");
|
||||
@ -184,18 +151,12 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
|
||||
abort();
|
||||
}
|
||||
|
||||
bitbang_i2c_interface *bitbang_i2c_init(I2CBus *bus)
|
||||
void bitbang_i2c_init(bitbang_i2c_interface *s, I2CBus *bus)
|
||||
{
|
||||
bitbang_i2c_interface *s;
|
||||
|
||||
s = g_malloc0(sizeof(bitbang_i2c_interface));
|
||||
|
||||
s->bus = bus;
|
||||
s->last_data = 1;
|
||||
s->last_clock = 1;
|
||||
s->device_out = 1;
|
||||
|
||||
return s;
|
||||
}
|
||||
|
||||
/* GPIO interface. */
|
||||
@ -207,7 +168,7 @@ typedef struct GPIOI2CState {
|
||||
SysBusDevice parent_obj;
|
||||
|
||||
MemoryRegion dummy_iomem;
|
||||
bitbang_i2c_interface *bitbang;
|
||||
bitbang_i2c_interface bitbang;
|
||||
int last_level;
|
||||
qemu_irq out;
|
||||
} GPIOI2CState;
|
||||
@ -216,7 +177,7 @@ static void bitbang_i2c_gpio_set(void *opaque, int irq, int level)
|
||||
{
|
||||
GPIOI2CState *s = opaque;
|
||||
|
||||
level = bitbang_i2c_set(s->bitbang, irq, level);
|
||||
level = bitbang_i2c_set(&s->bitbang, irq, level);
|
||||
if (level != s->last_level) {
|
||||
s->last_level = level;
|
||||
qemu_set_irq(s->out, level);
|
||||
@ -234,7 +195,7 @@ static void gpio_i2c_init(Object *obj)
|
||||
sysbus_init_mmio(sbd, &s->dummy_iomem);
|
||||
|
||||
bus = i2c_init_bus(dev, "i2c");
|
||||
s->bitbang = bitbang_i2c_init(bus);
|
||||
bitbang_i2c_init(&s->bitbang, bus);
|
||||
|
||||
qdev_init_gpio_in(dev, bitbang_i2c_gpio_set, 2);
|
||||
qdev_init_gpio_out(dev, &s->out, 1);
|
||||
|
@ -311,9 +311,9 @@ static void ppc4xx_i2c_writeb(void *opaque, hwaddr addr, uint64_t value,
|
||||
case IIC_DIRECTCNTL:
|
||||
i2c->directcntl = value & (IIC_DIRECTCNTL_SDAC & IIC_DIRECTCNTL_SCLC);
|
||||
i2c->directcntl |= (value & IIC_DIRECTCNTL_SCLC ? 1 : 0);
|
||||
bitbang_i2c_set(i2c->bitbang, BITBANG_I2C_SCL,
|
||||
bitbang_i2c_set(&i2c->bitbang, BITBANG_I2C_SCL,
|
||||
i2c->directcntl & IIC_DIRECTCNTL_MSCL);
|
||||
i2c->directcntl |= bitbang_i2c_set(i2c->bitbang, BITBANG_I2C_SDA,
|
||||
i2c->directcntl |= bitbang_i2c_set(&i2c->bitbang, BITBANG_I2C_SDA,
|
||||
(value & IIC_DIRECTCNTL_SDAC) != 0) << 1;
|
||||
break;
|
||||
default:
|
||||
@ -347,7 +347,7 @@ static void ppc4xx_i2c_init(Object *o)
|
||||
sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
|
||||
sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq);
|
||||
s->bus = i2c_init_bus(DEVICE(s), "i2c");
|
||||
s->bitbang = bitbang_i2c_init(s->bus);
|
||||
bitbang_i2c_init(&s->bitbang, s->bus);
|
||||
}
|
||||
|
||||
static void ppc4xx_i2c_class_init(ObjectClass *klass, void *data)
|
||||
|
@ -35,7 +35,7 @@ typedef struct VersatileI2CState {
|
||||
SysBusDevice parent_obj;
|
||||
|
||||
MemoryRegion iomem;
|
||||
bitbang_i2c_interface *bitbang;
|
||||
bitbang_i2c_interface bitbang;
|
||||
int out;
|
||||
int in;
|
||||
} VersatileI2CState;
|
||||
@ -70,8 +70,8 @@ static void versatile_i2c_write(void *opaque, hwaddr offset,
|
||||
qemu_log_mask(LOG_GUEST_ERROR,
|
||||
"%s: Bad offset 0x%x\n", __func__, (int)offset);
|
||||
}
|
||||
bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
|
||||
s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
|
||||
bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
|
||||
s->in = bitbang_i2c_set(&s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
|
||||
}
|
||||
|
||||
static const MemoryRegionOps versatile_i2c_ops = {
|
||||
@ -88,7 +88,7 @@ static void versatile_i2c_init(Object *obj)
|
||||
I2CBus *bus;
|
||||
|
||||
bus = i2c_init_bus(dev, "i2c");
|
||||
s->bitbang = bitbang_i2c_init(bus);
|
||||
bitbang_i2c_init(&s->bitbang, bus);
|
||||
memory_region_init_io(&s->iomem, obj, &versatile_i2c_ops, s,
|
||||
"versatile_i2c", 0x1000);
|
||||
sysbus_init_mmio(sbd, &s->iomem);
|
||||
|
@ -8,7 +8,43 @@ typedef struct bitbang_i2c_interface bitbang_i2c_interface;
|
||||
#define BITBANG_I2C_SDA 0
|
||||
#define BITBANG_I2C_SCL 1
|
||||
|
||||
bitbang_i2c_interface *bitbang_i2c_init(I2CBus *bus);
|
||||
typedef enum bitbang_i2c_state {
|
||||
STOPPED = 0,
|
||||
SENDING_BIT7,
|
||||
SENDING_BIT6,
|
||||
SENDING_BIT5,
|
||||
SENDING_BIT4,
|
||||
SENDING_BIT3,
|
||||
SENDING_BIT2,
|
||||
SENDING_BIT1,
|
||||
SENDING_BIT0,
|
||||
WAITING_FOR_ACK,
|
||||
RECEIVING_BIT7,
|
||||
RECEIVING_BIT6,
|
||||
RECEIVING_BIT5,
|
||||
RECEIVING_BIT4,
|
||||
RECEIVING_BIT3,
|
||||
RECEIVING_BIT2,
|
||||
RECEIVING_BIT1,
|
||||
RECEIVING_BIT0,
|
||||
SENDING_ACK,
|
||||
SENT_NACK
|
||||
} bitbang_i2c_state;
|
||||
|
||||
struct bitbang_i2c_interface {
|
||||
I2CBus *bus;
|
||||
bitbang_i2c_state state;
|
||||
int last_data;
|
||||
int last_clock;
|
||||
int device_out;
|
||||
uint8_t buffer;
|
||||
int current_addr;
|
||||
};
|
||||
|
||||
/**
|
||||
* bitbang_i2c_init: in-place initialize the bitbang_i2c_interface struct
|
||||
*/
|
||||
void bitbang_i2c_init(bitbang_i2c_interface *s, I2CBus *bus);
|
||||
int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level);
|
||||
|
||||
#endif
|
||||
|
@ -41,7 +41,7 @@ typedef struct PPC4xxI2CState {
|
||||
I2CBus *bus;
|
||||
qemu_irq irq;
|
||||
MemoryRegion iomem;
|
||||
bitbang_i2c_interface *bitbang;
|
||||
bitbang_i2c_interface bitbang;
|
||||
int mdidx;
|
||||
uint8_t mdata[4];
|
||||
uint8_t lmadr;
|
||||
|
Loading…
Reference in New Issue
Block a user