xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-23 19:49:43 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

target-arm queue:

Browse Source 
* support instruction syndrome info for data aborts from A64 to EL2
  * add HSTR_EL2 register
  * fix incorrect ESR IL bits in various syndrome register cases
  * virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
  * gicv2: RAZ/WI non-sec access to sec interrupts
  * i2c: add aspeed i2c controller
  * virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
  * xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
  * xlnx-zynqmp: Support KVM on AArch64 hosts
  * ptimer: Various fixes for awkward corner cases
  * char: QOMify various ARM UART models
  * char: get rid of qemu_char_get_next_serial
  * target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
  * zynqmp: Add the ZCU102 board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJXVZ5HAAoJEDwlJe0UNgzedgEP/Rbtq8xctqTjXuDL9zvzdnSI
 Gvv25/DPuJJREERlXVJWM6WVf2MIaiqMIhEe1jjMj6K/tAvNd0ZX+0rioFGJ+F1c
 GVdb28nHg8u89TBBpZai23XrjCDtEIpOw/Yo7W2KOCdpfQgEAMIiFvsEe+8q26Dp
 XAlmcqKWmmxvM5CrOOKulALvzkWowg4nEZ72IoB/dAvXl9S23iEHXz8FdJZcIb/H
 I7m+zOoSlW+vicHDeHO7BuO91eqiUXfDOXbIUbUu14Jku8iE5sW6wlUKDiHeotQt
 qOVuFWcMBh09G+YH6DR1Y9+TTMvBYHvZX0+v2nABUu9L10RibWhxjzArktU8ioka
 U4tAGcIFrrbCcInGShFvT10vI9A1cqGgfUyZcR5zm1jVE2uwg7KDER0eu4qytSbM
 WpJfL7vIiCmqKyHji+v/TdGqmjRfY7MdU4DmJvzwCcSOo8NJ3AI38qTEVUZBcWPi
 QCQCeCncckcDcEbC4jfCisxNHdyALv3c5s4jQS9r9VmbOs4BuPRwxpmliQQnzMRv
 pPW66ftoUojphAqNqdefScOc6CjU6OrqnJxy+BanWxyEBwUnegDGH782FYx4blne
 g47z+vJrg4F4op1d/X7Tpm6FgwiYIBR/KW2QUKb954/65YpEH8Y08laOgaMKtwMV
 8XZYvv0/kPLyc0gjYaPt
 =mHQd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160606-1' into staging

target-arm queue:
 * support instruction syndrome info for data aborts from A64 to EL2
 * add HSTR_EL2 register
 * fix incorrect ESR IL bits in various syndrome register cases
 * virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
 * gicv2: RAZ/WI non-sec access to sec interrupts
 * i2c: add aspeed i2c controller
 * virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
 * xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
 * xlnx-zynqmp: Support KVM on AArch64 hosts
 * ptimer: Various fixes for awkward corner cases
 * char: QOMify various ARM UART models
 * char: get rid of qemu_char_get_next_serial
 * target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
 * zynqmp: Add the ZCU102 board

# gpg: Signature made Mon 06 Jun 2016 17:01:11 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160606-1: (25 commits)
  zynqmp: Add the ZCU102 board
  target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
  char: get rid of qemu_char_get_next_serial
  hw/char: QOM'ify xilinx_uartlite model
  hw/char: QOM'ify stm32f2xx_usart model
  hw/char: QOM'ify digic-uart model
  hw/char: QOM'ify cadence_uart model
  hw/char: QOM'ify pl011 model
  hw/ptimer: Introduce ptimer_get_limit
  hw/ptimer: Support "on the fly" timer mode switch
  hw/ptimer: Update .delta on period/freq change
  hw/ptimer: Perform counter wrap around if timer already expired
  hw/ptimer: Fix issues caused by the adjusted timer limit value
  xlnx-zynqmp: Use the in kernel GIC model for KVM runs
  xlnx-zynqmp: Delay realization of GIC until post CPU realization
  xlnx-zynqmp: Make the RPU subsystem optional
  xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
  hw/arm/virt: Reject gic-version=host for non-KVM
  i2c: add aspeed i2c controller
  hw/intc/gic: RAZ/WI non-sec access to sec interrupts
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit is contained in:
Peter Maydell 2016-06-06 17:02:42 +01:00
commit 7646240580
41 changed files with 1125 additions and 213 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
hw/arm/ast2400.c
View File

@ -18,12 +18,14 @@
#include "hw/arm/ast2400.h"
#include "hw/char/serial.h"
#include "qemu/log.h"
#include "hw/i2c/aspeed_i2c.h"
#define AST2400_UART_5_BASE 0x00184000
#define AST2400_IOMEM_SIZE 0x00200000
#define AST2400_IOMEM_BASE 0x1E600000
#define AST2400_VIC_BASE 0x1E6C0000
#define AST2400_TIMER_BASE 0x1E782000
#define AST2400_I2C_BASE 0x1E78A000
static const int uart_irqs[] = { 9, 32, 33, 34, 10 };
static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, };
@ -66,6 +68,10 @@ static void ast2400_init(Object *obj)
object_initialize(&s->timerctrl, sizeof(s->timerctrl), TYPE_ASPEED_TIMER);
object_property_add_child(obj, "timerctrl", OBJECT(&s->timerctrl), NULL);
qdev_set_parent_bus(DEVICE(&s->timerctrl), sysbus_get_default());
object_initialize(&s->i2c, sizeof(s->i2c), TYPE_ASPEED_I2C);
object_property_add_child(obj, "i2c", OBJECT(&s->i2c), NULL);
qdev_set_parent_bus(DEVICE(&s->i2c), sysbus_get_default());
}
static void ast2400_realize(DeviceState *dev, Error **errp)
@ -110,6 +116,16 @@ static void ast2400_realize(DeviceState *dev, Error **errp)
serial_mm_init(&s->iomem, AST2400_UART_5_BASE, 2,
uart5, 38400, serial_hds[0], DEVICE_LITTLE_ENDIAN);
}
/* I2C */
object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, AST2400_I2C_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 12));
}
static void ast2400_class_init(ObjectClass *oc, void *data)

16
hw/arm/bcm2835_peripherals.c
View File

@ -14,6 +14,7 @@
#include "hw/misc/bcm2835_mbox_defs.h"
#include "hw/arm/raspi_platform.h"
#include "sysemu/char.h"
#include "sysemu/sysemu.h"
/* Peripheral base address on the VC (GPU) system bus */
#define BCM2835_VC_PERI_BASE 0x7e000000
@ -106,7 +107,6 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
MemoryRegion *ram;
Error *err = NULL;
uint32_t ram_size, vcram_size;
CharDriverState *chr;
int n;
obj = object_property_get_link(OBJECT(dev), "ram", &err);
@ -147,6 +147,7 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
sysbus_pass_irq(SYS_BUS_DEVICE(s), SYS_BUS_DEVICE(&s->ic));
/* UART0 */
qdev_prop_set_chr(DEVICE(s->uart0), "chardev", serial_hds[0]);
object_property_set_bool(OBJECT(s->uart0), true, "realized", &err);
if (err) {
error_propagate(errp, err);
@ -158,17 +159,8 @@ static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(s->uart0, 0,
qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
INTERRUPT_UART));
/* AUX / UART1 */
/* TODO: don't call qemu_char_get_next_serial() here, instead set
* chardev properties for each uart at the board level, once pl011
* (uart0) has been updated to avoid qemu_char_get_next_serial()
*/
chr = qemu_char_get_next_serial();
if (chr == NULL) {
chr = qemu_chr_new("bcm2835.uart1", "null", NULL);
}
qdev_prop_set_chr(DEVICE(&s->aux), "chardev", chr);
qdev_prop_set_chr(DEVICE(&s->aux), "chardev", serial_hds[1]);
object_property_set_bool(OBJECT(&s->aux), true, "realized", &err);
if (err) {
@ -292,8 +284,6 @@ static void bcm2835_peripherals_class_init(ObjectClass *oc, void *data)
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = bcm2835_peripherals_realize;
/* Reason: realize() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
}
static const TypeInfo bcm2835_peripherals_type_info = {

2
hw/arm/digic.c
View File

@ -23,6 +23,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/digic.h"
#include "sysemu/sysemu.h"
#define DIGIC4_TIMER_BASE(n) (0xc0210000 + (n) * 0x100)
@ -84,6 +85,7 @@ static void digic_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(sbd, 0, DIGIC4_TIMER_BASE(i));
}
qdev_prop_set_chr(DEVICE(&s->uart), "chardev", serial_hds[0]);
object_property_set_bool(OBJECT(&s->uart), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);

3
hw/arm/highbank.c
View File

@ -30,6 +30,7 @@
#include "sysemu/block-backend.h"
#include "exec/address-spaces.h"
#include "qemu/error-report.h"
#include "hw/char/pl011.h"
#define SMP_BOOT_ADDR 0x100
#define SMP_BOOT_REG 0x40
@ -326,7 +327,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
sysbus_create_simple("pl011", 0xfff36000, pic[20]);
pl011_create(0xfff36000, pic[20], serial_hds[0]);
dev = qdev_create(NULL, "highbank-regs");
qdev_init_nofail(dev);

5
hw/arm/integratorcp.c
View File

@ -20,6 +20,7 @@
#include "exec/address-spaces.h"
#include "sysemu/sysemu.h"
#include "qemu/error-report.h"
#include "hw/char/pl011.h"
#define TYPE_INTEGRATOR_CM "integrator_core"
#define INTEGRATOR_CM(obj) \
@ -588,8 +589,8 @@ static void integratorcp_init(MachineState *machine)
sysbus_create_varargs("integrator_pit", 0x13000000,
pic[5], pic[6], pic[7], NULL);
sysbus_create_simple("pl031", 0x15000000, pic[8]);
sysbus_create_simple("pl011", 0x16000000, pic[1]);
sysbus_create_simple("pl011", 0x17000000, pic[2]);
pl011_create(0x16000000, pic[1], serial_hds[0]);
pl011_create(0x17000000, pic[2], serial_hds[1]);
icp = sysbus_create_simple(TYPE_ICP_CONTROL_REGS, 0xcb000000,
qdev_get_gpio_in(sic, 3));
sysbus_create_simple("pl050_keyboard", 0x18000000, pic[3]);

9
hw/arm/realview.c
View File

@ -23,6 +23,7 @@
#include "sysemu/block-backend.h"
#include "exec/address-spaces.h"
#include "qemu/error-report.h"
#include "hw/char/pl011.h"
#define SMP_BOOT_ADDR 0xe0000000
#define SMP_BOOTREG_ADDR 0x10000030
@ -202,10 +203,10 @@ static void realview_init(MachineState *machine,
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
pl011_create(0x10009000, pic[12], serial_hds[0]);
pl011_create(0x1000a000, pic[13], serial_hds[1]);
pl011_create(0x1000b000, pic[14], serial_hds[2]);
pl011_create(0x1000c000, pic[15], serial_hds[3]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);

6
hw/arm/stellaris.c
View File

@ -20,6 +20,7 @@
#include "qemu/log.h"
#include "exec/address-spaces.h"
#include "sysemu/sysemu.h"
#include "hw/char/pl011.h"
#define GPIO_A 0
#define GPIO_B 1
@ -1303,8 +1304,9 @@ static void stellaris_init(const char *kernel_filename, const char *cpu_model,
for (i = 0; i < 4; i++) {
if (board->dc2 & (1 << i)) {
sysbus_create_simple("pl011_luminary", 0x4000c000 + i * 0x1000,
qdev_get_gpio_in(nvic, uart_irq[i]));
pl011_luminary_create(0x4000c000 + i * 0x1000,
qdev_get_gpio_in(nvic, uart_irq[i]),
serial_hds[i]);
}
}
if (board->dc2 & (1 << 4)) {

1
hw/arm/stm32f205_soc.c
View File

@ -107,6 +107,7 @@ static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
/* Attach UART (uses USART registers) and USART controllers */
for (i = 0; i < STM_NUM_USARTS; i++) {
usartdev = DEVICE(&(s->usart[i]));
qdev_prop_set_chr(usartdev, "chardev", i < MAX_SERIAL_PORTS ? serial_hds[i] : NULL);
object_property_set_bool(OBJECT(&s->usart[i]), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);

9
hw/arm/versatilepb.c
View File

@ -23,6 +23,7 @@
#include "exec/address-spaces.h"
#include "hw/block/flash.h"
#include "qemu/error-report.h"
#include "hw/char/pl011.h"
#define VERSATILE_FLASH_ADDR 0x34000000
#define VERSATILE_FLASH_SIZE (64 * 1024 * 1024)
@ -284,10 +285,10 @@ static void versatile_init(MachineState *machine, int board_id)
n--;
}
sysbus_create_simple("pl011", 0x101f1000, pic[12]);
sysbus_create_simple("pl011", 0x101f2000, pic[13]);
sysbus_create_simple("pl011", 0x101f3000, pic[14]);
sysbus_create_simple("pl011", 0x10009000, sic[6]);
pl011_create(0x101f1000, pic[12], serial_hds[0]);
pl011_create(0x101f2000, pic[13], serial_hds[1]);
pl011_create(0x101f3000, pic[14], serial_hds[2]);
pl011_create(0x10009000, sic[6], serial_hds[3]);
sysbus_create_simple("pl080", 0x10130000, pic[17]);
sysbus_create_simple("sp804", 0x101e2000, pic[4]);

9
hw/arm/vexpress.c
View File

@ -39,6 +39,7 @@
#include "sysemu/device_tree.h"
#include "qemu/error-report.h"
#include <libfdt.h>
#include "hw/char/pl011.h"
#define VEXPRESS_BOARD_ID 0x8e0
#define VEXPRESS_FLASH_SIZE (64 * 1024 * 1024)
@ -631,10 +632,10 @@ static void vexpress_common_init(MachineState *machine)
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
pl011_create(map[VE_UART0], pic[5], serial_hds[0]);
pl011_create(map[VE_UART1], pic[6], serial_hds[1]);
pl011_create(map[VE_UART2], pic[7], serial_hds[2]);
pl011_create(map[VE_UART3], pic[8], serial_hds[3]);
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);

3
hw/arm/virt-acpi-build.c
View File

@ -231,7 +231,8 @@ static void acpi_dsdt_add_pci(Aml *scope, const MemMapEntry *memmap,
aml_append(rbuf,
aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000,
base_mmio_high, base_mmio_high, 0x0000,
base_mmio_high,
base_mmio_high + size_mmio_high - 1, 0x0000,
size_mmio_high));
}

7
hw/arm/virt.c
View File

@ -536,6 +536,7 @@ static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic, int uart,
DeviceState *dev = qdev_create(NULL, "pl011");
SysBusDevice *s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", serial_hds[0]);
qdev_init_nofail(dev);
memory_region_add_subregion(mem, base,
sysbus_mmio_get_region(s, 0));
@ -1122,10 +1123,14 @@ static void machvirt_init(MachineState *machine)
* KVM is not available yet
*/
if (!gic_version) {
if (!kvm_enabled()) {
error_report("gic-version=host requires KVM");
exit(1);
}
gic_version = kvm_arm_vgic_probe();
if (!gic_version) {
error_report("Unable to determine GIC version supported by host");
error_printf("KVM acceleration is probably not supported\n");
exit(1);
}
}

5
hw/arm/xilinx_zynq.c
View File

@ -32,6 +32,7 @@
#include "hw/ssi/ssi.h"
#include "qemu/error-report.h"
#include "hw/sd/sd.h"
#include "hw/char/cadence_uart.h"
#define NUM_SPI_FLASHES 4
#define NUM_QSPI_FLASHES 2
@ -235,8 +236,8 @@ static void zynq_init(MachineState *machine)
sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hds[0]);
cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hds[1]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);

8
hw/arm/xlnx-ep108.c
View File

@ -114,3 +114,11 @@ static void xlnx_ep108_machine_init(MachineClass *mc)
}
DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init)
static void xlnx_zcu102_machine_init(MachineClass *mc)
{
mc->desc = "Xilinx ZynqMP ZCU102 board";
mc->init = xlnx_ep108_init;
}
DEFINE_MACHINE("xlnx-zcu102", xlnx_zcu102_machine_init)

122
hw/arm/xlnx-zynqmp.c
View File

@ -22,6 +22,8 @@
#include "hw/arm/xlnx-zynqmp.h"
#include "hw/intc/arm_gic_common.h"
#include "exec/address-spaces.h"
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#define GIC_NUM_SPI_INTR 160
@ -83,6 +85,41 @@ static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index)
return GIC_NUM_SPI_INTR + cpu_nr * GIC_INTERNAL + ppi_index;
}
static void xlnx_zynqmp_create_rpu(XlnxZynqMPState *s, const char *boot_cpu,
Error **errp)
{
Error *err = NULL;
int i;
for (i = 0; i < XLNX_ZYNQMP_NUM_RPU_CPUS; i++) {
char *name;
object_initialize(&s->rpu_cpu[i], sizeof(s->rpu_cpu[i]),
"cortex-r5-" TYPE_ARM_CPU);
object_property_add_child(OBJECT(s), "rpu-cpu[*]",
OBJECT(&s->rpu_cpu[i]), &error_abort);
name = object_get_canonical_path_component(OBJECT(&s->rpu_cpu[i]));
if (strcmp(name, boot_cpu)) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true,
"start-powered-off", &error_abort);
} else {
s->boot_cpu_ptr = &s->rpu_cpu[i];
}
g_free(name);
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true, "reset-hivecs",
&error_abort);
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true, "realized",
&err);
if (err) {
error_propagate(errp, err);
return;
}
}
}
static void xlnx_zynqmp_init(Object *obj)
{
XlnxZynqMPState *s = XLNX_ZYNQMP(obj);
@ -95,19 +132,12 @@ static void xlnx_zynqmp_init(Object *obj)
&error_abort);
}
for (i = 0; i < XLNX_ZYNQMP_NUM_RPU_CPUS; i++) {
object_initialize(&s->rpu_cpu[i], sizeof(s->rpu_cpu[i]),
"cortex-r5-" TYPE_ARM_CPU);
object_property_add_child(obj, "rpu-cpu[*]", OBJECT(&s->rpu_cpu[i]),
&error_abort);
}
object_property_add_link(obj, "ddr-ram", TYPE_MEMORY_REGION,
(Object **)&s->ddr_ram,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_initialize(&s->gic, sizeof(s->gic), TYPE_ARM_GIC);
object_initialize(&s->gic, sizeof(s->gic), gic_class_name());
qdev_set_parent_bus(DEVICE(&s->gic), sysbus_get_default());
for (i = 0; i < XLNX_ZYNQMP_NUM_GEMS; i++) {
@ -196,11 +226,42 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32);
qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2);
qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", XLNX_ZYNQMP_NUM_APU_CPUS);
/* Realize APUs before realizing the GIC. KVM requires this. */
for (i = 0; i < XLNX_ZYNQMP_NUM_APU_CPUS; i++) {
char *name;
object_property_set_int(OBJECT(&s->apu_cpu[i]), QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
name = object_get_canonical_path_component(OBJECT(&s->apu_cpu[i]));
if (strcmp(name, boot_cpu)) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(OBJECT(&s->apu_cpu[i]), true,
"start-powered-off", &error_abort);
} else {
s->boot_cpu_ptr = &s->apu_cpu[i];
}
g_free(name);
object_property_set_bool(OBJECT(&s->apu_cpu[i]),
s->secure, "has_el3", NULL);
object_property_set_int(OBJECT(&s->apu_cpu[i]), GIC_BASE_ADDR,
"reset-cbar", &error_abort);
object_property_set_bool(OBJECT(&s->apu_cpu[i]), true, "realized",
&err);
if (err) {
error_propagate(errp, err);
return;
}
}
object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
assert(ARRAY_SIZE(xlnx_zynqmp_gic_regions) == XLNX_ZYNQMP_GIC_REGIONS);
for (i = 0; i < XLNX_ZYNQMP_GIC_REGIONS; i++) {
SysBusDevice *gic = SYS_BUS_DEVICE(&s->gic);
@ -223,29 +284,6 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
for (i = 0; i < XLNX_ZYNQMP_NUM_APU_CPUS; i++) {
qemu_irq irq;
char *name;
object_property_set_int(OBJECT(&s->apu_cpu[i]), QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
name = object_get_canonical_path_component(OBJECT(&s->apu_cpu[i]));
if (strcmp(name, boot_cpu)) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(OBJECT(&s->apu_cpu[i]), true,
"start-powered-off", &error_abort);
} else {
s->boot_cpu_ptr = &s->apu_cpu[i];
}
g_free(name);
object_property_set_int(OBJECT(&s->apu_cpu[i]), GIC_BASE_ADDR,
"reset-cbar", &error_abort);
object_property_set_bool(OBJECT(&s->apu_cpu[i]), true, "realized",
&err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]),
@ -258,23 +296,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), 1, irq);
}
for (i = 0; i < XLNX_ZYNQMP_NUM_RPU_CPUS; i++) {
char *name;
name = object_get_canonical_path_component(OBJECT(&s->rpu_cpu[i]));
if (strcmp(name, boot_cpu)) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true,
"start-powered-off", &error_abort);
} else {
s->boot_cpu_ptr = &s->rpu_cpu[i];
}
g_free(name);
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true, "reset-hivecs",
&error_abort);
object_property_set_bool(OBJECT(&s->rpu_cpu[i]), true, "realized",
&err);
if (s->has_rpu) {
xlnx_zynqmp_create_rpu(s, boot_cpu, &err);
if (err) {
error_propagate(errp, err);
return;
@ -308,6 +331,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
}
for (i = 0; i < XLNX_ZYNQMP_NUM_UARTS; i++) {
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hds[i]);
object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
@ -370,6 +394,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
static Property xlnx_zynqmp_props[] = {
DEFINE_PROP_STRING("boot-cpu", XlnxZynqMPState, boot_cpu),
DEFINE_PROP_BOOL("secure", XlnxZynqMPState, secure, false),
DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false),
DEFINE_PROP_END_OF_LIST()
};

13
hw/char/cadence_uart.c
View File

@ -468,9 +468,6 @@ static void cadence_uart_realize(DeviceState *dev, Error **errp)
s->fifo_trigger_handle = timer_new_ns(QEMU_CLOCK_VIRTUAL,
fifo_trigger_update, s);
/* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
s->chr = qemu_char_get_next_serial();
if (s->chr) {
qemu_chr_add_handlers(s->chr, uart_can_receive, uart_receive,
uart_event, s);
@ -517,6 +514,11 @@ static const VMStateDescription vmstate_cadence_uart = {
}
};
static Property cadence_uart_properties[] = {
DEFINE_PROP_CHR("chardev", CadenceUARTState, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void cadence_uart_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@ -524,9 +526,8 @@ static void cadence_uart_class_init(ObjectClass *klass, void *data)
dc->realize = cadence_uart_realize;
dc->vmsd = &vmstate_cadence_uart;
dc->reset = cadence_uart_reset;
/* Reason: realize() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
}
dc->props = cadence_uart_properties;
}
static const TypeInfo cadence_uart_info = {
.name = TYPE_CADENCE_UART,

10
hw/char/digic-uart.c
View File

@ -145,8 +145,6 @@ static void digic_uart_realize(DeviceState *dev, Error **errp)
{
DigicUartState *s = DIGIC_UART(dev);
/* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
s->chr = qemu_char_get_next_serial();
if (s->chr) {
qemu_chr_add_handlers(s->chr, uart_can_rx, uart_rx, uart_event, s);
}
@ -172,6 +170,11 @@ static const VMStateDescription vmstate_digic_uart = {
}
};
static Property digic_uart_properties[] = {
DEFINE_PROP_CHR("chardev", DigicUartState, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void digic_uart_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
@ -179,8 +182,7 @@ static void digic_uart_class_init(ObjectClass *klass, void *data)
dc->realize = digic_uart_realize;
dc->reset = digic_uart_reset;
dc->vmsd = &vmstate_digic_uart;
/* Reason: realize() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
dc->props = digic_uart_properties;
}
static const TypeInfo digic_uart_info = {

11
hw/char/pl011.c
View File

@ -274,6 +274,11 @@ static const VMStateDescription vmstate_pl011 = {
}
};
static Property pl011_properties[] = {
DEFINE_PROP_CHR("chardev", PL011State, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void pl011_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
@ -295,9 +300,6 @@ static void pl011_realize(DeviceState *dev, Error **errp)
{
PL011State *s = PL011(dev);
/* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
s->chr = qemu_char_get_next_serial();
if (s->chr) {
qemu_chr_add_handlers(s->chr, pl011_can_receive, pl011_receive,
pl011_event, s);
@ -310,8 +312,7 @@ static void pl011_class_init(ObjectClass *oc, void *data)
dc->realize = pl011_realize;
dc->vmsd = &vmstate_pl011;
/* Reason: realize() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
dc->props = pl011_properties;
}
static const TypeInfo pl011_arm_info = {

15
hw/char/stm32f2xx_usart.c
View File

@ -190,6 +190,11 @@ static const MemoryRegionOps stm32f2xx_usart_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
static Property stm32f2xx_usart_properties[] = {
DEFINE_PROP_CHR("chardev", STM32F2XXUsartState, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void stm32f2xx_usart_init(Object *obj)
{
STM32F2XXUsartState *s = STM32F2XX_USART(obj);
@ -199,9 +204,11 @@ static void stm32f2xx_usart_init(Object *obj)
memory_region_init_io(&s->mmio, obj, &stm32f2xx_usart_ops, s,
TYPE_STM32F2XX_USART, 0x2000);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
}
/* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
s->chr = qemu_char_get_next_serial();
static void stm32f2xx_usart_realize(DeviceState *dev, Error **errp)
{
STM32F2XXUsartState *s = STM32F2XX_USART(dev);
if (s->chr) {
qemu_chr_add_handlers(s->chr, stm32f2xx_usart_can_receive,
@ -214,8 +221,8 @@ static void stm32f2xx_usart_class_init(ObjectClass *klass, void *data)
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = stm32f2xx_usart_reset;
/* Reason: instance_init() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
dc->props = stm32f2xx_usart_properties;
dc->realize = stm32f2xx_usart_realize;
}
static const TypeInfo stm32f2xx_usart_info = {

10
hw/char/xilinx_uartlite.c
View File

@ -172,6 +172,11 @@ static const MemoryRegionOps uart_ops = {
}
};
static Property xilinx_uartlite_properties[] = {
DEFINE_PROP_CHR("chardev", XilinxUARTLite, chr),
DEFINE_PROP_END_OF_LIST(),
};
static void uart_rx(void *opaque, const uint8_t *buf, int size)
{
XilinxUARTLite *s = opaque;
@ -206,8 +211,6 @@ static void xilinx_uartlite_realize(DeviceState *dev, Error **errp)
{
XilinxUARTLite *s = XILINX_UARTLITE(dev);
/* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
s->chr = qemu_char_get_next_serial();
if (s->chr)
qemu_chr_add_handlers(s->chr, uart_can_rx, uart_rx, uart_event, s);
}
@ -229,8 +232,7 @@ static void xilinx_uartlite_class_init(ObjectClass *klass, void *data)
dc->reset = xilinx_uartlite_reset;
dc->realize = xilinx_uartlite_realize;
/* Reason: realize() method uses qemu_char_get_next_serial() */
dc->cannot_instantiate_with_device_add_yet = true;
dc->props = xilinx_uartlite_properties;
}
static const TypeInfo xilinx_uartlite_info = {

88
hw/core/ptimer.c
View File

@ -35,6 +35,9 @@ static void ptimer_trigger(ptimer_state *s)
static void ptimer_reload(ptimer_state *s)
{
uint32_t period_frac = s->period_frac;
uint64_t period = s->period;
if (s->delta == 0) {
ptimer_trigger(s);
s->delta = s->limit;
@ -45,10 +48,24 @@ static void ptimer_reload(ptimer_state *s)
return;
}
/*
* Artificially limit timeout rate to something
* achievable under QEMU. Otherwise, QEMU spends all
* its time generating timer interrupts, and there
* is no forward progress.
* About ten microseconds is the fastest that really works
* on the current generation of host machines.
*/
if (s->enabled == 1 && (s->delta * period < 10000) && !use_icount) {
period = 10000 / s->delta;
period_frac = 0;
}
s->last_event = s->next_event;
s->next_event = s->last_event + s->delta * s->period;
if (s->period_frac) {
s->next_event += ((int64_t)s->period_frac * s->delta) >> 32;
s->next_event = s->last_event + s->delta * period;
if (period_frac) {
s->next_event += ((int64_t)period_frac * s->delta) >> 32;
}
timer_mod(s->timer, s->next_event);
}
@ -67,14 +84,16 @@ static void ptimer_tick(void *opaque)
uint64_t ptimer_get_count(ptimer_state *s)
{
int64_t now;
uint64_t counter;
if (s->enabled) {
now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
int64_t next = s->next_event;
bool expired = (now - next >= 0);
bool oneshot = (s->enabled == 2);
/* Figure out the current counter value. */
if (now - s->next_event > 0
|| s->period == 0) {
if (s->period == 0 || (expired && (oneshot || use_icount))) {
/* Prevent timer underflowing if it should already have
triggered. */
counter = 0;
@ -83,6 +102,13 @@ uint64_t ptimer_get_count(ptimer_state *s)
uint64_t div;
int clz1, clz2;
int shift;
uint32_t period_frac = s->period_frac;
uint64_t period = s->period;
if (!oneshot && (s->delta * period < 10000) && !use_icount) {
period = 10000 / s->delta;
period_frac = 0;
}
/* We need to divide time by period, where time is stored in
rem (64-bit integer) and period is stored in period/period_frac
@ -94,8 +120,8 @@ uint64_t ptimer_get_count(ptimer_state *s)
backwards.
*/
rem = s->next_event - now;
div = s->period;
rem = expired ? now - next : next - now;
div = period;
clz1 = clz64(rem);
clz2 = clz64(div);
@ -104,16 +130,21 @@ uint64_t ptimer_get_count(ptimer_state *s)
rem <<= shift;
div <<= shift;
if (shift >= 32) {
div |= ((uint64_t)s->period_frac << (shift - 32));
div |= ((uint64_t)period_frac << (shift - 32));
} else {
if (shift != 0)
div |= (s->period_frac >> (32 - shift));
div |= (period_frac >> (32 - shift));
/* Look at remaining bits of period_frac and round div up if
necessary. */
if ((uint32_t)(s->period_frac << shift))
if ((uint32_t)(period_frac << shift))
div += 1;
}
counter = rem / div;
if (expired && counter != 0) {
/* Wrap around periodic counter. */
counter = s->limit - (counter - 1) % s->limit;
}
}
} else {
counter = s->delta;
@ -132,16 +163,17 @@ void ptimer_set_count(ptimer_state *s, uint64_t count)
void ptimer_run(ptimer_state *s, int oneshot)
{
if (s->enabled) {
return;
}
if (s->period == 0) {
bool was_disabled = !s->enabled;
if (was_disabled && s->period == 0) {
fprintf(stderr, "Timer with period zero, disabling\n");
return;
}
s->enabled = oneshot ? 2 : 1;
s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ptimer_reload(s);
if (was_disabled) {
s->next_event = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
ptimer_reload(s);
}
}
/* Pause a timer. Note that this may cause it to "lose" time, even if it
@ -159,6 +191,7 @@ void ptimer_stop(ptimer_state *s)
/* Set counter increment interval in nanoseconds. */
void ptimer_set_period(ptimer_state *s, int64_t period)
{
s->delta = ptimer_get_count(s);
s->period = period;
s->period_frac = 0;
if (s->enabled) {
@ -170,6 +203,7 @@ void ptimer_set_period(ptimer_state *s, int64_t period)
/* Set counter frequency in Hz. */
void ptimer_set_freq(ptimer_state *s, uint32_t freq)
{
s->delta = ptimer_get_count(s);
s->period = 1000000000ll / freq;
s->period_frac = (1000000000ll << 32) / freq;
if (s->enabled) {
@ -182,19 +216,6 @@ void ptimer_set_freq(ptimer_state *s, uint32_t freq)
count = limit. */
void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload)
{
/*
* Artificially limit timeout rate to something
* achievable under QEMU. Otherwise, QEMU spends all
* its time generating timer interrupts, and there
* is no forward progress.
* About ten microseconds is the fastest that really works
* on the current generation of host machines.
*/
if (!use_icount && limit * s->period < 10000 && s->period) {
limit = 10000 / s->period;
}
s->limit = limit;
if (reload)
s->delta = limit;
@ -204,6 +225,11 @@ void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload)
}
}
uint64_t ptimer_get_limit(ptimer_state *s)
{
return s->limit;
}
const VMStateDescription vmstate_ptimer = {
.name = "ptimer",
.version_id = 1,

1
hw/i2c/Makefile.objs
View File

@ -5,4 +5,5 @@ common-obj-$(CONFIG_APM) += pm_smbus.o
common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o
common-obj-$(CONFIG_IMX_I2C) += imx_i2c.o
common-obj-$(CONFIG_ASPEED_SOC) += aspeed_i2c.o
obj-$(CONFIG_OMAP) += omap_i2c.o

440
hw/i2c/aspeed_i2c.c Normal file
View File

@ -0,0 +1,440 @@
/*
* ARM Aspeed I2C controller
*
* Copyright (C) 2016 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "qemu/log.h"
#include "hw/i2c/aspeed_i2c.h"
/* I2C Global Register */
#define I2C_CTRL_STATUS 0x00 /* Device Interrupt Status */
#define I2C_CTRL_ASSIGN 0x08 /* Device Interrupt Target
Assignment */
/* I2C Device (Bus) Register */
#define I2CD_FUN_CTRL_REG 0x00 /* I2CD Function Control */
#define I2CD_BUFF_SEL_MASK (0x7 << 20)
#define I2CD_BUFF_SEL(x) (x << 20)
#define I2CD_M_SDA_LOCK_EN (0x1 << 16)
#define I2CD_MULTI_MASTER_DIS (0x1 << 15)
#define I2CD_M_SCL_DRIVE_EN (0x1 << 14)
#define I2CD_MSB_STS (0x1 << 9)
#define I2CD_SDA_DRIVE_1T_EN (0x1 << 8)
#define I2CD_M_SDA_DRIVE_1T_EN (0x1 << 7)
#define I2CD_M_HIGH_SPEED_EN (0x1 << 6)
#define I2CD_DEF_ADDR_EN (0x1 << 5)
#define I2CD_DEF_ALERT_EN (0x1 << 4)
#define I2CD_DEF_ARP_EN (0x1 << 3)
#define I2CD_DEF_GCALL_EN (0x1 << 2)
#define I2CD_SLAVE_EN (0x1 << 1)
#define I2CD_MASTER_EN (0x1)
#define I2CD_AC_TIMING_REG1 0x04 /* Clock and AC Timing Control #1 */
#define I2CD_AC_TIMING_REG2 0x08 /* Clock and AC Timing Control #1 */
#define I2CD_INTR_CTRL_REG 0x0c /* I2CD Interrupt Control */
#define I2CD_INTR_STS_REG 0x10 /* I2CD Interrupt Status */
#define I2CD_INTR_SDA_DL_TIMEOUT (0x1 << 14)
#define I2CD_INTR_BUS_RECOVER_DONE (0x1 << 13)
#define I2CD_INTR_SMBUS_ALERT (0x1 << 12) /* Bus [0-3] only */
#define I2CD_INTR_SMBUS_ARP_ADDR (0x1 << 11) /* Removed */
#define I2CD_INTR_SMBUS_DEV_ALERT_ADDR (0x1 << 10) /* Removed */
#define I2CD_INTR_SMBUS_DEF_ADDR (0x1 << 9) /* Removed */
#define I2CD_INTR_GCALL_ADDR (0x1 << 8) /* Removed */
#define I2CD_INTR_SLAVE_MATCH (0x1 << 7) /* use RX_DONE */
#define I2CD_INTR_SCL_TIMEOUT (0x1 << 6)
#define I2CD_INTR_ABNORMAL (0x1 << 5)
#define I2CD_INTR_NORMAL_STOP (0x1 << 4)
#define I2CD_INTR_ARBIT_LOSS (0x1 << 3)
#define I2CD_INTR_RX_DONE (0x1 << 2)
#define I2CD_INTR_TX_NAK (0x1 << 1)
#define I2CD_INTR_TX_ACK (0x1 << 0)
#define I2CD_CMD_REG 0x14 /* I2CD Command/Status */
#define I2CD_SDA_OE (0x1 << 28)
#define I2CD_SDA_O (0x1 << 27)
#define I2CD_SCL_OE (0x1 << 26)
#define I2CD_SCL_O (0x1 << 25)
#define I2CD_TX_TIMING (0x1 << 24)
#define I2CD_TX_STATUS (0x1 << 23)
#define I2CD_TX_STATE_SHIFT 19 /* Tx State Machine */
#define I2CD_TX_STATE_MASK 0xf
#define I2CD_IDLE 0x0
#define I2CD_MACTIVE 0x8
#define I2CD_MSTART 0x9
#define I2CD_MSTARTR 0xa
#define I2CD_MSTOP 0xb
#define I2CD_MTXD 0xc
#define I2CD_MRXACK 0xd
#define I2CD_MRXD 0xe
#define I2CD_MTXACK 0xf
#define I2CD_SWAIT 0x1
#define I2CD_SRXD 0x4
#define I2CD_STXACK 0x5
#define I2CD_STXD 0x6
#define I2CD_SRXACK 0x7
#define I2CD_RECOVER 0x3
#define I2CD_SCL_LINE_STS (0x1 << 18)
#define I2CD_SDA_LINE_STS (0x1 << 17)
#define I2CD_BUS_BUSY_STS (0x1 << 16)
#define I2CD_SDA_OE_OUT_DIR (0x1 << 15)
#define I2CD_SDA_O_OUT_DIR (0x1 << 14)
#define I2CD_SCL_OE_OUT_DIR (0x1 << 13)
#define I2CD_SCL_O_OUT_DIR (0x1 << 12)
#define I2CD_BUS_RECOVER_CMD_EN (0x1 << 11)
#define I2CD_S_ALT_EN (0x1 << 10)
#define I2CD_RX_DMA_ENABLE (0x1 << 9)
#define I2CD_TX_DMA_ENABLE (0x1 << 8)
/* Command Bit */
#define I2CD_M_STOP_CMD (0x1 << 5)
#define I2CD_M_S_RX_CMD_LAST (0x1 << 4)
#define I2CD_M_RX_CMD (0x1 << 3)
#define I2CD_S_TX_CMD (0x1 << 2)
#define I2CD_M_TX_CMD (0x1 << 1)
#define I2CD_M_START_CMD (0x1)
#define I2CD_DEV_ADDR_REG 0x18 /* Slave Device Address */
#define I2CD_BUF_CTRL_REG 0x1c /* Pool Buffer Control */
#define I2CD_BYTE_BUF_REG 0x20 /* Transmit/Receive Byte Buffer */
#define I2CD_BYTE_BUF_TX_SHIFT 0
#define I2CD_BYTE_BUF_TX_MASK 0xff
#define I2CD_BYTE_BUF_RX_SHIFT 8
#define I2CD_BYTE_BUF_RX_MASK 0xff
static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus)
{
return bus->ctrl & I2CD_MASTER_EN;
}
static inline bool aspeed_i2c_bus_is_enabled(AspeedI2CBus *bus)
{
return bus->ctrl & (I2CD_MASTER_EN | I2CD_SLAVE_EN);
}
static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus)
{
bus->intr_status &= bus->intr_ctrl;
if (bus->intr_status) {
bus->controller->intr_status |= 1 << bus->id;
qemu_irq_raise(bus->controller->irq);
}
}
static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset,
unsigned size)
{
AspeedI2CBus *bus = opaque;
switch (offset) {
case I2CD_FUN_CTRL_REG:
return bus->ctrl;
case I2CD_AC_TIMING_REG1:
return bus->timing[0];
case I2CD_AC_TIMING_REG2:
return bus->timing[1];
case I2CD_INTR_CTRL_REG:
return bus->intr_ctrl;
case I2CD_INTR_STS_REG:
return bus->intr_status;
case I2CD_BYTE_BUF_REG:
return bus->buf;
case I2CD_CMD_REG:
return bus->cmd | (i2c_bus_busy(bus->bus) << 16);
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset);
return -1;
}
}
static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
{
bus->cmd |= value & 0xFFFF;
bus->intr_status = 0;
if (bus->cmd & I2CD_M_START_CMD) {
if (i2c_start_transfer(bus->bus, extract32(bus->buf, 1, 7),
extract32(bus->buf, 0, 1))) {
bus->intr_status |= I2CD_INTR_TX_NAK;
} else {
bus->intr_status |= I2CD_INTR_TX_ACK;
}
} else if (bus->cmd & I2CD_M_TX_CMD) {
if (i2c_send(bus->bus, bus->buf)) {
bus->intr_status |= (I2CD_INTR_TX_NAK | I2CD_INTR_ABNORMAL);
i2c_end_transfer(bus->bus);
} else {
bus->intr_status |= I2CD_INTR_TX_ACK;
}
} else if (bus->cmd & I2CD_M_RX_CMD) {
int ret = i2c_recv(bus->bus);
if (ret < 0) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: read failed\n", __func__);
ret = 0xff;
} else {
bus->intr_status |= I2CD_INTR_RX_DONE;
}
bus->buf = (ret & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT;
}
if (bus->cmd & (I2CD_M_STOP_CMD | I2CD_M_S_RX_CMD_LAST)) {
if (!i2c_bus_busy(bus->bus)) {
bus->intr_status |= I2CD_INTR_ABNORMAL;
} else {
i2c_end_transfer(bus->bus);
bus->intr_status |= I2CD_INTR_NORMAL_STOP;
}
}
/* command is handled, reset it and check for interrupts */
bus->cmd &= ~0xFFFF;
aspeed_i2c_bus_raise_interrupt(bus);
}
static void aspeed_i2c_bus_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
AspeedI2CBus *bus = opaque;
switch (offset) {
case I2CD_FUN_CTRL_REG:
if (value & I2CD_SLAVE_EN) {
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
__func__);
break;
}
bus->ctrl = value & 0x0071C3FF;
break;
case I2CD_AC_TIMING_REG1:
bus->timing[0] = value & 0xFFFFF0F;
break;
case I2CD_AC_TIMING_REG2:
bus->timing[1] = value & 0x7;
break;
case I2CD_INTR_CTRL_REG:
bus->intr_ctrl = value & 0x7FFF;
break;
case I2CD_INTR_STS_REG:
bus->intr_status &= ~(value & 0x7FFF);
bus->controller->intr_status &= ~(1 << bus->id);
qemu_irq_lower(bus->controller->irq);
break;
case I2CD_DEV_ADDR_REG:
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
__func__);
break;
case I2CD_BYTE_BUF_REG:
bus->buf = (value & I2CD_BYTE_BUF_TX_MASK) << I2CD_BYTE_BUF_TX_SHIFT;
break;
case I2CD_CMD_REG:
if (!aspeed_i2c_bus_is_enabled(bus)) {
break;
}
if (!aspeed_i2c_bus_is_master(bus)) {
qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
__func__);
break;
}
aspeed_i2c_bus_handle_cmd(bus, value);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
}
}
static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset,
unsigned size)
{
AspeedI2CState *s = opaque;
switch (offset) {
case I2C_CTRL_STATUS:
return s->intr_status;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
break;
}
return -1;
}
static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
switch (offset) {
case I2C_CTRL_STATUS:
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
__func__, offset);
break;
}
}
static const MemoryRegionOps aspeed_i2c_bus_ops = {
.read = aspeed_i2c_bus_read,
.write = aspeed_i2c_bus_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static const MemoryRegionOps aspeed_i2c_ctrl_ops = {
.read = aspeed_i2c_ctrl_read,
.write = aspeed_i2c_ctrl_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static const VMStateDescription aspeed_i2c_bus_vmstate = {
.name = TYPE_ASPEED_I2C,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(id, AspeedI2CBus),
VMSTATE_UINT32(ctrl, AspeedI2CBus),
VMSTATE_UINT32_ARRAY(timing, AspeedI2CBus, 2),
VMSTATE_UINT32(intr_ctrl, AspeedI2CBus),
VMSTATE_UINT32(intr_status, AspeedI2CBus),
VMSTATE_UINT32(cmd, AspeedI2CBus),
VMSTATE_UINT32(buf, AspeedI2CBus),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription aspeed_i2c_vmstate = {
.name = TYPE_ASPEED_I2C,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(intr_status, AspeedI2CState),
VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState,
ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate,
AspeedI2CBus),
VMSTATE_END_OF_LIST()
}
};
static void aspeed_i2c_reset(DeviceState *dev)
{
int i;
AspeedI2CState *s = ASPEED_I2C(dev);
s->intr_status = 0;
for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) {
s->busses[i].intr_ctrl = 0;
s->busses[i].intr_status = 0;
s->busses[i].cmd = 0;
s->busses[i].buf = 0;
i2c_end_transfer(s->busses[i].bus);
}
}
/*
* Address Definitions
*
* 0x000 ... 0x03F: Global Register
* 0x040 ... 0x07F: Device 1
* 0x080 ... 0x0BF: Device 2
* 0x0C0 ... 0x0FF: Device 3
* 0x100 ... 0x13F: Device 4
* 0x140 ... 0x17F: Device 5
* 0x180 ... 0x1BF: Device 6
* 0x1C0 ... 0x1FF: Device 7
* 0x200 ... 0x2FF: Buffer Pool (unused in linux driver)
* 0x300 ... 0x33F: Device 8
* 0x340 ... 0x37F: Device 9
* 0x380 ... 0x3BF: Device 10
* 0x3C0 ... 0x3FF: Device 11
* 0x400 ... 0x43F: Device 12
* 0x440 ... 0x47F: Device 13
* 0x480 ... 0x4BF: Device 14
* 0x800 ... 0xFFF: Buffer Pool (unused in linux driver)
*/
static void aspeed_i2c_realize(DeviceState *dev, Error **errp)
{
int i;
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedI2CState *s = ASPEED_I2C(dev);
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s,
"aspeed.i2c", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
for (i = 0; i < ASPEED_I2C_NR_BUSSES; i++) {
char name[16];
int offset = i < 7 ? 1 : 5;
snprintf(name, sizeof(name), "aspeed.i2c.%d", i);
s->busses[i].controller = s;
s->busses[i].id = i;
s->busses[i].bus = i2c_init_bus(dev, name);
memory_region_init_io(&s->busses[i].mr, OBJECT(dev),
&aspeed_i2c_bus_ops, &s->busses[i], name, 0x40);
memory_region_add_subregion(&s->iomem, 0x40 * (i + offset),
&s->busses[i].mr);
}
}
static void aspeed_i2c_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->vmsd = &aspeed_i2c_vmstate;
dc->reset = aspeed_i2c_reset;
dc->realize = aspeed_i2c_realize;
dc->desc = "Aspeed I2C Controller";
}
static const TypeInfo aspeed_i2c_info = {
.name = TYPE_ASPEED_I2C,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedI2CState),
.class_init = aspeed_i2c_class_init,
};
static void aspeed_i2c_register_types(void)
{
type_register_static(&aspeed_i2c_info);
}
type_init(aspeed_i2c_register_types)
I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr)
{
AspeedI2CState *s = ASPEED_I2C(dev);
I2CBus *bus = NULL;
if (busnr >= 0 && busnr < ASPEED_I2C_NR_BUSSES) {
bus = s->busses[busnr].bus;
}
return bus;
}

68
hw/intc/arm_gic.c
View File

@ -661,6 +661,11 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
goto bad_reg;
res = 0;
for (i = 0; i < 8; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (GIC_TEST_ENABLED(irq + i, cm)) {
res |= (1 << i);
}
@ -677,6 +682,11 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
res = 0;
mask = (irq < GIC_INTERNAL) ? cm : ALL_CPU_MASK;
for (i = 0; i < 8; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (gic_test_pending(s, irq + i, mask)) {
res |= (1 << i);
}
@ -689,6 +699,11 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
res = 0;
mask = (irq < GIC_INTERNAL) ? cm : ALL_CPU_MASK;
for (i = 0; i < 8; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (GIC_TEST_ACTIVE(irq + i, mask)) {
res |= (1 << i);
}
@ -722,6 +737,11 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
goto bad_reg;
res = 0;
for (i = 0; i < 4; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (GIC_TEST_MODEL(irq + i))
res |= (1 << (i * 2));
if (GIC_TEST_EDGE_TRIGGER(irq + i))
@ -742,7 +762,12 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
/* GICD_SPENDSGIRn */
}
res = s->sgi_pending[irq][cpu];
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq, 1 << cpu)) {
res = 0; /* Ignore Non-secure access of Group0 IRQ */
} else {
res = s->sgi_pending[irq][cpu];
}
} else if (offset < 0xfd0) {
goto bad_reg;
} else if (offset < 0x1000) {
@ -862,6 +887,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
(irq < GIC_INTERNAL) ? (1 << cpu) : GIC_TARGET(irq + i);
int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (!GIC_TEST_ENABLED(irq + i, cm)) {
DPRINTF("Enabled IRQ %d\n", irq + i);
trace_gic_enable_irq(irq + i);
@ -889,6 +919,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
if (value & (1 << i)) {
int cm = (irq < GIC_INTERNAL) ? (1 << cpu) : ALL_CPU_MASK;
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (GIC_TEST_ENABLED(irq + i, cm)) {
DPRINTF("Disabled IRQ %d\n", irq + i);
trace_gic_disable_irq(irq + i);
@ -907,6 +942,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
for (i = 0; i < 8; i++) {
if (value & (1 << i)) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
GIC_SET_PENDING(irq + i, GIC_TARGET(irq + i));
}
}
@ -920,6 +960,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
}
for (i = 0; i < 8; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
/* ??? This currently clears the pending bit for all CPUs, even
for per-CPU interrupts. It's unclear whether this is the
corect behavior. */
@ -960,6 +1005,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
if (irq < GIC_NR_SGIS)
value |= 0xaa;
for (i = 0; i < 4; i++) {
if (s->security_extn && !attrs.secure &&
!GIC_TEST_GROUP(irq + i, 1 << cpu)) {
continue; /* Ignore Non-secure access of Group0 IRQ */
}
if (s->revision == REV_11MPCORE || s->revision == REV_NVIC) {
if (value & (1 << (i * 2))) {
GIC_SET_MODEL(irq + i);
@ -983,9 +1033,12 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
}
irq = (offset - 0xf10);
s->sgi_pending[irq][cpu] &= ~value;
if (s->sgi_pending[irq][cpu] == 0) {
GIC_CLEAR_PENDING(irq, 1 << cpu);
if (!s->security_extn || attrs.secure ||
GIC_TEST_GROUP(irq, 1 << cpu)) {
s->sgi_pending[irq][cpu] &= ~value;
if (s->sgi_pending[irq][cpu] == 0) {
GIC_CLEAR_PENDING(irq, 1 << cpu);
}
}
} else if (offset < 0xf30) {
/* GICD_SPENDSGIRn */
@ -994,8 +1047,11 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
}
irq = (offset - 0xf20);
GIC_SET_PENDING(irq, 1 << cpu);
s->sgi_pending[irq][cpu] |= value;
if (!s->security_extn || attrs.secure ||
GIC_TEST_GROUP(irq, 1 << cpu)) {
GIC_SET_PENDING(irq, 1 << cpu);
s->sgi_pending[irq][cpu] |= value;
}
} else {
goto bad_reg;
}

5
hw/microblaze/petalogix_s3adsp1800_mmu.c
View File

@ -36,6 +36,7 @@
#include "hw/boards.h"
#include "sysemu/block-backend.h"
#include "exec/address-spaces.h"
#include "hw/char/xilinx_uartlite.h"
#include "boot.h"
@ -103,8 +104,8 @@ petalogix_s3adsp1800_init(MachineState *machine)
irq[i] = qdev_get_gpio_in(dev, i);
}
sysbus_create_simple("xlnx.xps-uartlite", UARTLITE_BASEADDR,
irq[UARTLITE_IRQ]);
xilinx_uartlite_create(UARTLITE_BASEADDR, irq[UARTLITE_IRQ],
serial_hds[0]);
/* 2 timers at irq 2 @ 62 Mhz. */
dev = qdev_create(NULL, "xlnx.xps-timer");

2
include/hw/arm/ast2400.h
View File

@ -15,6 +15,7 @@
#include "hw/arm/arm.h"
#include "hw/intc/aspeed_vic.h"
#include "hw/timer/aspeed_timer.h"
#include "hw/i2c/aspeed_i2c.h"
typedef struct AST2400State {
/*< private >*/
@ -25,6 +26,7 @@ typedef struct AST2400State {
MemoryRegion iomem;
AspeedVICState vic;
AspeedTimerCtrlState timerctrl;
AspeedI2CState i2c;
} AST2400State;
#define TYPE_AST2400 "ast2400"

5
include/hw/arm/xlnx-zynqmp.h
View File

@ -84,6 +84,11 @@ typedef struct XlnxZynqMPState {
char *boot_cpu;
ARMCPU *boot_cpu_ptr;
/* Has the ARM Security extensions? */
bool secure;
/* Has the RPU subsystem? */
bool has_rpu;
} XlnxZynqMPState;
#define XLNX_ZYNQMP_H

17
include/hw/char/cadence_uart.h
View File

@ -49,5 +49,22 @@ typedef struct {
QEMUTimer *fifo_trigger_handle;
} CadenceUARTState;
static inline DeviceState *cadence_uart_create(hwaddr addr,
qemu_irq irq,
CharDriverState *chr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, TYPE_CADENCE_UART);
s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", chr);
qdev_init_nofail(dev);
sysbus_mmio_map(s, 0, addr);
sysbus_connect_irq(s, 0, irq);
return dev;
}
#define CADENCE_UART_H
#endif

52
include/hw/char/pl011.h Normal file
View File

@ -0,0 +1,52 @@
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef PL011_UART_H
#define PL011_UART_H
static inline DeviceState *pl011_create(hwaddr addr,
qemu_irq irq,
CharDriverState *chr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "pl011");
s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", chr);
qdev_init_nofail(dev);
sysbus_mmio_map(s, 0, addr);
sysbus_connect_irq(s, 0, irq);
return dev;
}
static inline DeviceState *pl011_luminary_create(hwaddr addr,
qemu_irq irq,
CharDriverState *chr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "pl011_luminary");
s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", chr);
qdev_init_nofail(dev);
sysbus_mmio_map(s, 0, addr);
sysbus_connect_irq(s, 0, irq);
return dev;
}
#endif

35
include/hw/char/xilinx_uartlite.h Normal file
View File

@ -0,0 +1,35 @@
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef XILINX_UARTLITE_H
#define XILINX_UARTLITE_H
static inline DeviceState *xilinx_uartlite_create(hwaddr addr,
qemu_irq irq,
CharDriverState *chr)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "xlnx.xps-uartlite");
s = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", chr);
qdev_init_nofail(dev);
sysbus_mmio_map(s, 0, addr);
sysbus_connect_irq(s, 0, irq);
return dev;
}
#endif

62
include/hw/i2c/aspeed_i2c.h Normal file
View File

@ -0,0 +1,62 @@
/*
* ASPEED AST2400 I2C Controller
*
* Copyright (C) 2016 IBM Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef ASPEED_I2C_H
#define ASPEED_I2C_H
#include "hw/i2c/i2c.h"
#define TYPE_ASPEED_I2C "aspeed.i2c"
#define ASPEED_I2C(obj) \
OBJECT_CHECK(AspeedI2CState, (obj), TYPE_ASPEED_I2C)
#define ASPEED_I2C_NR_BUSSES 14
struct AspeedI2CState;
typedef struct AspeedI2CBus {
struct AspeedI2CState *controller;
MemoryRegion mr;
I2CBus *bus;
uint8_t id;
uint32_t ctrl;
uint32_t timing[2];
uint32_t intr_ctrl;
uint32_t intr_status;
uint32_t cmd;
uint32_t buf;
} AspeedI2CBus;
typedef struct AspeedI2CState {
SysBusDevice parent_obj;
MemoryRegion iomem;
qemu_irq irq;
uint32_t intr_status;
AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES];
} AspeedI2CState;
I2CBus *aspeed_i2c_get_bus(DeviceState *dev, int busnr);
#endif /* ASPEED_I2C_H */

1
include/hw/ptimer.h
View File

@ -19,6 +19,7 @@ typedef void (*ptimer_cb)(void *opaque);
ptimer_state *ptimer_init(QEMUBH *bh);
void ptimer_set_period(ptimer_state *s, int64_t period);
void ptimer_set_freq(ptimer_state *s, uint32_t freq);
uint64_t ptimer_get_limit(ptimer_state *s);
void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
uint64_t ptimer_get_count(ptimer_state *s);
void ptimer_set_count(ptimer_state *s, uint64_t count);

1
include/sysemu/char.h
View File

@ -403,7 +403,6 @@ void register_char_driver(const char *name, ChardevBackendKind kind,
extern int term_escape_char;
CharDriverState *qemu_char_get_next_serial(void);
/* console.c */
typedef CharDriverState *(VcHandler)(ChardevVC *vc, Error **errp);

16
qemu-char.c
View File

@ -4088,22 +4088,6 @@ CharDriverState *qemu_chr_find(const char *name)
return NULL;
}
/* Get a character (serial) device interface. */
CharDriverState *qemu_char_get_next_serial(void)
{
static int next_serial;
CharDriverState *chr;
/* FIXME: This function needs to go away: use chardev properties! */
while (next_serial < MAX_SERIAL_PORTS && serial_hds[next_serial]) {
chr = serial_hds[next_serial++];
qemu_chr_fe_claim_no_fail(chr);
return chr;
}
return NULL;
}
QemuOptsList qemu_chardev_opts = {
.name = "chardev",
.implied_opt_name = "backend",

15
target-arm/cpu.h
View File

@ -93,7 +93,19 @@
#define ARM_CPU_VFIQ 3
#define NB_MMU_MODES 7
#define TARGET_INSN_START_EXTRA_WORDS 1
/* ARM-specific extra insn start words:
* 1: Conditional execution bits
* 2: Partial exception syndrome for data aborts
*/
#define TARGET_INSN_START_EXTRA_WORDS 2
/* The 2nd extra word holding syndrome info for data aborts does not use
* the upper 6 bits nor the lower 14 bits. We mask and shift it down to
* help the sleb128 encoder do a better job.
* When restoring the CPU state, we shift it back up.
*/
#define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1)
#define ARM_INSN_START_WORD2_SHIFT 14
/* We currently assume float and double are IEEE single and double
precision respectively.
@ -278,6 +290,7 @@ typedef struct CPUARMState {
uint64_t far_el[4];
};
uint64_t hpfar_el2;
uint64_t hstr_el2;
union { /* Translation result. */
struct {
uint64_t _unused_par_0;

48
target-arm/helper.c
View File

@ -3471,6 +3471,9 @@ static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
.access = PL2_RW, .accessfn = access_el3_aa32ns_aa64any,
.type = ARM_CP_CONST, .resetvalue = 0 },
{ .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3,
.access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
REGINFO_SENTINEL
};
@ -3706,6 +3709,10 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4,
.access = PL2_RW,
.fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) },
{ .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH,
.cp = 15, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3,
.access = PL2_RW,
.fieldoffset = offsetof(CPUARMState, cp15.hstr_el2) },
REGINFO_SENTINEL
};
@ -6358,9 +6365,6 @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
env->elr_el[new_el] = env->pc;
} else {
env->banked_spsr[aarch64_banked_spsr_index(new_el)] = cpsr_read(env);
if (!env->thumb) {
env->cp15.esr_el[new_el] |= 1 << 25;
}
env->elr_el[new_el] = env->regs[15];
aarch64_sync_32_to_64(env);
@ -7275,7 +7279,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
target_ulong page_size;
uint32_t attrs;
int32_t stride = 9;
int32_t va_size;
int32_t addrsize;
int inputsize;
int32_t tbi = 0;
TCR *tcr = regime_tcr(env, mmu_idx);
@ -7283,6 +7287,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
uint32_t el = regime_el(env, mmu_idx);
bool ttbr1_valid = true;
uint64_t descaddrmask;
bool aarch64 = arm_el_is_aa64(env, el);
/* TODO:
* This code does not handle the different format TCR for VTCR_EL2.
@ -7290,9 +7295,9 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* Attribute and permission bit handling should also be checked when adding
* support for those page table walks.
*/
if (arm_el_is_aa64(env, el)) {
if (aarch64) {
level = 0;
va_size = 64;
addrsize = 64;
if (el > 1) {
if (mmu_idx != ARMMMUIdx_S2NS) {
tbi = extract64(tcr->raw_tcr, 20, 1);
@ -7314,7 +7319,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
}
} else {
level = 1;
va_size = 32;
addrsize = 32;
/* There is no TTBR1 for EL2 */
if (el == 2) {
ttbr1_valid = false;
@ -7326,7 +7331,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* This is a Non-secure PL0/1 stage 1 translation, so controlled by
* TTBCR/TTBR0/TTBR1 in accordance with ARM ARM DDI0406C table B-32:
*/
if (va_size == 64) {
if (aarch64) {
/* AArch64 translation. */
t0sz = extract32(tcr->raw_tcr, 0, 6);
t0sz = MIN(t0sz, 39);
@ -7338,7 +7343,12 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
/* AArch32 stage 2 translation. */
bool sext = extract32(tcr->raw_tcr, 4, 1);
bool sign = extract32(tcr->raw_tcr, 3, 1);
t0sz = sextract32(tcr->raw_tcr, 0, 4);
/* Address size is 40-bit for a stage 2 translation,
* and t0sz can be negative (from -8 to 7),
* so we need to adjust it to use the TTBR selecting logic below.
*/
addrsize = 40;
t0sz = sextract32(tcr->raw_tcr, 0, 4) + 8;
/* If the sign-extend bit is not the same as t0sz[3], the result
* is unpredictable. Flag this as a guest error. */
@ -7348,15 +7358,15 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
}
}
t1sz = extract32(tcr->raw_tcr, 16, 6);
if (va_size == 64) {
if (aarch64) {
t1sz = MIN(t1sz, 39);
t1sz = MAX(t1sz, 16);
}
if (t0sz && !extract64(address, va_size - t0sz, t0sz - tbi)) {
if (t0sz && !extract64(address, addrsize - t0sz, t0sz - tbi)) {
/* there is a ttbr0 region and we are in it (high bits all zero) */
ttbr_select = 0;
} else if (ttbr1_valid && t1sz &&
!extract64(~address, va_size - t1sz, t1sz - tbi)) {
!extract64(~address, addrsize - t1sz, t1sz - tbi)) {
/* there is a ttbr1 region and we are in it (high bits all one) */
ttbr_select = 1;
} else if (!t0sz) {
@ -7383,7 +7393,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
if (el < 2) {
epd = extract32(tcr->raw_tcr, 7, 1);
}
inputsize = va_size - t0sz;
inputsize = addrsize - t0sz;
tg = extract32(tcr->raw_tcr, 14, 2);
if (tg == 1) { /* 64KB pages */
@ -7398,7 +7408,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
ttbr = regime_ttbr(env, mmu_idx, 1);
epd = extract32(tcr->raw_tcr, 23, 1);
inputsize = va_size - t1sz;
inputsize = addrsize - t1sz;
tg = extract32(tcr->raw_tcr, 30, 2);
if (tg == 3) { /* 64KB pages */
@ -7410,7 +7420,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
}
/* Here we should have set up all the parameters for the translation:
* va_size, inputsize, ttbr, epd, stride, tbi
* inputsize, ttbr, epd, stride, tbi
*/
if (epd) {
@ -7441,7 +7451,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
uint32_t startlevel;
bool ok;
if (va_size == 32 || stride == 9) {
if (!aarch64 || stride == 9) {
/* AArch32 or 4KB pages */
startlevel = 2 - sl0;
} else {
@ -7450,7 +7460,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
}
/* Check that the starting level is valid. */
ok = check_s2_mmu_setup(cpu, va_size == 64, startlevel,
ok = check_s2_mmu_setup(cpu, aarch64, startlevel,
inputsize, stride);
if (!ok) {
fault_type = translation_fault;
@ -7471,7 +7481,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* up to bit 39 for AArch32, because we don't need other bits in that case
* to construct next descriptor address (anyway they should be all zeroes).
*/
descaddrmask = ((1ull << (va_size == 64 ? 48 : 40)) - 1) &
descaddrmask = ((1ull << (aarch64 ? 48 : 40)) - 1) &
~indexmask_grainsize;
/* Secure accesses start with the page table in secure memory and
@ -7554,7 +7564,7 @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address,
} else {
ns = extract32(attrs, 3, 1);
pxn = extract32(attrs, 11, 1);
*prot = get_S1prot(env, mmu_idx, va_size == 64, ap, ns, xn, pxn);
*prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
}
fault_type = permission_fault;

6
target-arm/internals.h
View File

@ -367,7 +367,7 @@ static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit)
static inline uint32_t syn_insn_abort(int same_el, int ea, int s1ptw, int fsc)
{
return (EC_INSNABORT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
| (ea << 9) | (s1ptw << 7) | fsc;
| ARM_EL_IL | (ea << 9) | (s1ptw << 7) | fsc;
}
static inline uint32_t syn_data_abort_no_iss(int same_el,
@ -396,13 +396,13 @@ static inline uint32_t syn_data_abort_with_iss(int same_el,
static inline uint32_t syn_swstep(int same_el, int isv, int ex)
{
return (EC_SOFTWARESTEP << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
| (isv << 24) | (ex << 6) | 0x22;
| ARM_EL_IL | (isv << 24) | (ex << 6) | 0x22;
}
static inline uint32_t syn_watchpoint(int same_el, int cm, int wnr)
{
return (EC_WATCHPOINT << ARM_EL_EC_SHIFT) | (same_el << ARM_EL_EC_SHIFT)
| (cm << 8) | (wnr << 6) | 0x22;
| ARM_EL_IL | (cm << 8) | (wnr << 6) | 0x22;
}
static inline uint32_t syn_breakpoint(int same_el)

49
target-arm/op_helper.c
View File

@ -76,6 +76,43 @@ uint32_t HELPER(neon_tbl)(CPUARMState *env, uint32_t ireg, uint32_t def,
#if !defined(CONFIG_USER_ONLY)
static inline uint32_t merge_syn_data_abort(uint32_t template_syn,
unsigned int target_el,
bool same_el,
bool s1ptw, int is_write,
int fsc)
{
uint32_t syn;
/* ISV is only set for data aborts routed to EL2 and
* never for stage-1 page table walks faulting on stage 2.
*
* Furthermore, ISV is only set for certain kinds of load/stores.
* If the template syndrome does not have ISV set, we should leave
* it cleared.
*
* See ARMv8 specs, D7-1974:
* ISS encoding for an exception from a Data Abort, the
* ISV field.
*/
if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) {
syn = syn_data_abort_no_iss(same_el,
0, 0, s1ptw, is_write == 1, fsc);
} else {
/* Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template
* syndrome created at translation time.
* Now we create the runtime syndrome with the remaining fields.
*/
syn = syn_data_abort_with_iss(same_el,
0, 0, 0, 0, 0,
0, 0, s1ptw, is_write == 1, fsc,
false);
/* Merge the runtime syndrome with the template syndrome. */
syn |= template_syn;
}
return syn;
}
/* try to fill the TLB and return an exception if error. If retaddr is
* NULL, it means that the function was called in C code (i.e. not
* from generated code or from helper.c)
@ -116,8 +153,8 @@ void tlb_fill(CPUState *cs, target_ulong addr, int is_write, int mmu_idx,
syn = syn_insn_abort(same_el, 0, fi.s1ptw, syn);
exc = EXCP_PREFETCH_ABORT;
} else {
syn = syn_data_abort_no_iss(same_el,
0, 0, fi.s1ptw, is_write == 1, syn);
syn = merge_syn_data_abort(env->exception.syndrome, target_el,
same_el, fi.s1ptw, is_write, syn);
if (is_write == 1 && arm_feature(env, ARM_FEATURE_V6)) {
fsr |= (1 << 11);
}
@ -138,6 +175,7 @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int is_write,
CPUARMState *env = &cpu->env;
int target_el;
bool same_el;
uint32_t syn;
if (retaddr) {
/* now we have a real cpu fault */
@ -162,10 +200,9 @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int is_write,
env->exception.fsr |= (1 << 11);
}
raise_exception(env, EXCP_DATA_ABORT,
syn_data_abort_no_iss(same_el,
0, 0, 0, is_write == 1, 0x21),
target_el);
syn = merge_syn_data_abort(env->exception.syndrome, target_el,
same_el, 0, is_write, 0x21);
raise_exception(env, EXCP_DATA_ABORT, syn, target_el);
}
#endif /* !defined(CONFIG_USER_ONLY) */

140
target-arm/translate-a64.c
View File

@ -308,6 +308,20 @@ static inline void gen_goto_tb(DisasContext *s, int n, uint64_t dest)
}
}
static void disas_set_insn_syndrome(DisasContext *s, uint32_t syn)
{
/* We don't need to save all of the syndrome so we mask and shift
* out uneeded bits to help the sleb128 encoder do a better job.
*/
syn &= ARM_INSN_START_WORD2_MASK;
syn >>= ARM_INSN_START_WORD2_SHIFT;
/* We check and clear insn_start_idx to catch multiple updates. */
assert(s->insn_start_idx != 0);
tcg_set_insn_param(s->insn_start_idx, 2, syn);
s->insn_start_idx = 0;
}
static void unallocated_encoding(DisasContext *s)
{
/* Unallocated and reserved encodings are uncategorized */
@ -723,23 +737,47 @@ static void gen_adc_CC(int sf, TCGv_i64 dest, TCGv_i64 t0, TCGv_i64 t1)
* Store from GPR register to memory.
*/
static void do_gpr_st_memidx(DisasContext *s, TCGv_i64 source,
TCGv_i64 tcg_addr, int size, int memidx)
TCGv_i64 tcg_addr, int size, int memidx,
bool iss_valid,
unsigned int iss_srt,
bool iss_sf, bool iss_ar)
{
g_assert(size <= 3);
tcg_gen_qemu_st_i64(source, tcg_addr, memidx, s->be_data + size);
if (iss_valid) {
uint32_t syn;
syn = syn_data_abort_with_iss(0,
size,
false,
iss_srt,
iss_sf,
iss_ar,
0, 0, 0, 0, 0, false);
disas_set_insn_syndrome(s, syn);
}
}
static void do_gpr_st(DisasContext *s, TCGv_i64 source,
TCGv_i64 tcg_addr, int size)
TCGv_i64 tcg_addr, int size,
bool iss_valid,
unsigned int iss_srt,
bool iss_sf, bool iss_ar)
{
do_gpr_st_memidx(s, source, tcg_addr, size, get_mem_index(s));
do_gpr_st_memidx(s, source, tcg_addr, size, get_mem_index(s),
iss_valid, iss_srt, iss_sf, iss_ar);
}
/*
* Load from memory to GPR register
*/
static void do_gpr_ld_memidx(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr,
int size, bool is_signed, bool extend, int memidx)
static void do_gpr_ld_memidx(DisasContext *s,
TCGv_i64 dest, TCGv_i64 tcg_addr,
int size, bool is_signed,
bool extend, int memidx,
bool iss_valid, unsigned int iss_srt,
bool iss_sf, bool iss_ar)
{
TCGMemOp memop = s->be_data + size;
@ -755,13 +793,30 @@ static void do_gpr_ld_memidx(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr,
g_assert(size < 3);
tcg_gen_ext32u_i64(dest, dest);
}
if (iss_valid) {
uint32_t syn;
syn = syn_data_abort_with_iss(0,
size,
is_signed,
iss_srt,
iss_sf,
iss_ar,
0, 0, 0, 0, 0, false);
disas_set_insn_syndrome(s, syn);
}
}
static void do_gpr_ld(DisasContext *s, TCGv_i64 dest, TCGv_i64 tcg_addr,
int size, bool is_signed, bool extend)
static void do_gpr_ld(DisasContext *s,
TCGv_i64 dest, TCGv_i64 tcg_addr,
int size, bool is_signed, bool extend,
bool iss_valid, unsigned int iss_srt,
bool iss_sf, bool iss_ar)
{
do_gpr_ld_memidx(s, dest, tcg_addr, size, is_signed, extend,
get_mem_index(s));
get_mem_index(s),
iss_valid, iss_srt, iss_sf, iss_ar);
}
/*
@ -1817,6 +1872,22 @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2,
}
#endif
/* Update the Sixty-Four bit (SF) registersize. This logic is derived
* from the ARMv8 specs for LDR (Shared decode for all encodings).
*/
static bool disas_ldst_compute_iss_sf(int size, bool is_signed, int opc)
{
int opc0 = extract32(opc, 0, 1);
int regsize;
if (is_signed) {
regsize = opc0 ? 32 : 64;
} else {
regsize = size == 3 ? 64 : 32;
}
return regsize == 64;
}
/* C3.3.6 Load/store exclusive
*
* 31 30 29 24 23 22 21 20 16 15 14 10 9 5 4 0
@ -1868,10 +1939,15 @@ static void disas_ldst_excl(DisasContext *s, uint32_t insn)
}
} else {
TCGv_i64 tcg_rt = cpu_reg(s, rt);
bool iss_sf = disas_ldst_compute_iss_sf(size, false, 0);
/* Generate ISS for non-exclusive accesses including LASR. */
if (is_store) {
do_gpr_st(s, tcg_rt, tcg_addr, size);
do_gpr_st(s, tcg_rt, tcg_addr, size,
true, rt, iss_sf, is_lasr);
} else {
do_gpr_ld(s, tcg_rt, tcg_addr, size, false, false);
do_gpr_ld(s, tcg_rt, tcg_addr, size, false, false,
true, rt, iss_sf, is_lasr);
}
}
}
@ -1923,7 +1999,11 @@ static void disas_ld_lit(DisasContext *s, uint32_t insn)
if (is_vector) {
do_fp_ld(s, rt, tcg_addr, size);
} else {
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, false);
/* Only unsigned 32bit loads target 32bit registers. */
bool iss_sf = opc == 0 ? 32 : 64;
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, false,
true, rt, iss_sf, false);
}
tcg_temp_free_i64(tcg_addr);
}
@ -2042,9 +2122,11 @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn)
} else {
TCGv_i64 tcg_rt = cpu_reg(s, rt);
if (is_load) {
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, false);
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, false,
false, 0, false, false);
} else {
do_gpr_st(s, tcg_rt, tcg_addr, size);
do_gpr_st(s, tcg_rt, tcg_addr, size,
false, 0, false, false);
}
}
tcg_gen_addi_i64(tcg_addr, tcg_addr, 1 << size);
@ -2057,9 +2139,11 @@ static void disas_ldst_pair(DisasContext *s, uint32_t insn)
} else {
TCGv_i64 tcg_rt2 = cpu_reg(s, rt2);
if (is_load) {
do_gpr_ld(s, tcg_rt2, tcg_addr, size, is_signed, false);
do_gpr_ld(s, tcg_rt2, tcg_addr, size, is_signed, false,
false, 0, false, false);
} else {
do_gpr_st(s, tcg_rt2, tcg_addr, size);
do_gpr_st(s, tcg_rt2, tcg_addr, size,
false, 0, false, false);
}
}
@ -2102,6 +2186,7 @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn,
bool is_store = false;
bool is_extended = false;
bool is_unpriv = (idx == 2);
bool iss_valid = !is_vector;
bool post_index;
bool writeback;
@ -2169,12 +2254,15 @@ static void disas_ldst_reg_imm9(DisasContext *s, uint32_t insn,
} else {
TCGv_i64 tcg_rt = cpu_reg(s, rt);
int memidx = is_unpriv ? get_a64_user_mem_index(s) : get_mem_index(s);
bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc);
if (is_store) {
do_gpr_st_memidx(s, tcg_rt, tcg_addr, size, memidx);
do_gpr_st_memidx(s, tcg_rt, tcg_addr, size, memidx,
iss_valid, rt, iss_sf, false);
} else {
do_gpr_ld_memidx(s, tcg_rt, tcg_addr, size,
is_signed, is_extended, memidx);
is_signed, is_extended, memidx,
iss_valid, rt, iss_sf, false);
}
}
@ -2272,10 +2360,14 @@ static void disas_ldst_reg_roffset(DisasContext *s, uint32_t insn,
}
} else {
TCGv_i64 tcg_rt = cpu_reg(s, rt);
bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc);
if (is_store) {
do_gpr_st(s, tcg_rt, tcg_addr, size);
do_gpr_st(s, tcg_rt, tcg_addr, size,
true, rt, iss_sf, false);
} else {
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, is_extended);
do_gpr_ld(s, tcg_rt, tcg_addr, size,
is_signed, is_extended,
true, rt, iss_sf, false);
}
}
}
@ -2352,10 +2444,13 @@ static void disas_ldst_reg_unsigned_imm(DisasContext *s, uint32_t insn,
}
} else {
TCGv_i64 tcg_rt = cpu_reg(s, rt);
bool iss_sf = disas_ldst_compute_iss_sf(size, is_signed, opc);
if (is_store) {
do_gpr_st(s, tcg_rt, tcg_addr, size);
do_gpr_st(s, tcg_rt, tcg_addr, size,
true, rt, iss_sf, false);
} else {
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, is_extended);
do_gpr_ld(s, tcg_rt, tcg_addr, size, is_signed, is_extended,
true, rt, iss_sf, false);
}
}
}
@ -11102,7 +11197,8 @@ void gen_intermediate_code_a64(ARMCPU *cpu, TranslationBlock *tb)
tcg_clear_temp_count();
do {
tcg_gen_insn_start(dc->pc, 0);
dc->insn_start_idx = tcg_op_buf_count();
tcg_gen_insn_start(dc->pc, 0, 0);
num_insns++;
if (unlikely(!QTAILQ_EMPTY(&cs->breakpoints))) {

5
target-arm/translate.c
View File

@ -11732,7 +11732,8 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
}
do {
tcg_gen_insn_start(dc->pc,
(dc->condexec_cond << 4) | (dc->condexec_mask >> 1));
(dc->condexec_cond << 4) | (dc->condexec_mask >> 1),
0);
num_insns++;
#ifdef CONFIG_USER_ONLY
@ -12049,8 +12050,10 @@ void restore_state_to_opc(CPUARMState *env, TranslationBlock *tb,
if (is_a64(env)) {
env->pc = data[0];
env->condexec_bits = 0;
env->exception.syndrome = data[2] << ARM_INSN_START_WORD2_SHIFT;
} else {
env->regs[15] = data[0];
env->condexec_bits = data[1];
env->exception.syndrome = data[2] << ARM_INSN_START_WORD2_SHIFT;
}
}

2
target-arm/translate.h
View File

@ -59,6 +59,8 @@ typedef struct DisasContext {
bool ss_same_el;
/* Bottom two bits of XScale c15_cpar coprocessor access control reg */
int c15_cpar;
/* TCG op index of the current insn_start. */
int insn_start_idx;
#define TMP_A64_MAX 16
int tmp_a64_count;
TCGv_i64 tmp_a64[TMP_A64_MAX];