ioapic: when switches to level trigger mode, interrupts raised repeatedly.

- the trigger mode is edge at first
- During initializatoin, the interrupt is raised as edge which is masked.
  The corresponding bit of irr is set.
- Then the mode is switched to level and it's unmasked.
- the bit of irr is set, so the interrupt is raised repeatedly by
  ioapic_service().
- OS considers that the irq line is broken and falls back to polling mode.

This patch fixes the issues.
After raising edige, clear the bit of irr.

> Bringing up interface eth0:
> Determining IP information for eth0...irq 18: nobody cared (try booting with the "irqpoll" option)
> Pid: 4126, comm: ip Not tainted 2.6.38-rc7 #1
> Call Trace:
>  <IRQ>  [<ffffffff8105b009>] ? __report_bad_irq+0x38/0x87
>  [<ffffffff8105b177>] ? note_interrupt+0x11f/0x188
>  [<ffffffff8105bacf>] ? handle_fasteoi_irq+0xa7/0xd1
>  [<ffffffff810046ff>] ? handle_irq+0x83/0x8c
>  [<ffffffff81003eb9>] ? do_IRQ+0x48/0xaf
>  [<ffffffff81300513>] ? ret_from_intr+0x0/0xe
>  [<ffffffff81031ab8>] ? __do_softirq+0x4f/0x114
>  [<ffffffff81002d6c>] ? call_softirq+0x1c/0x28
>  [<ffffffff81004647>] ? do_softirq+0x33/0x68
>  [<ffffffff810316fb>] ? irq_exit+0x36/0x38
>  [<ffffffff81015f2c>] ? smp_apic_timer_interrupt+0x88/0x96
>  [<ffffffff81002853>] ? apic_timer_interrupt+0x13/0x20
>  <EOI>  [<ffffffff810177ed>] ? __ioapic_set_affinity+0x68/0x7c
>  [<ffffffff813000f0>] ? _raw_spin_unlock_irqrestore+0x8/0xa
>  [<ffffffff8105a84f>] ? __setup_irq+0x224/0x2cb
>  [<ffffffff8120e3c5>] ? e1000_intr+0x0/0x103
>  [<ffffffff8105a9c7>] ? request_threaded_irq+0xd1/0x114
>  [<ffffffff8120e396>] ? e1000_request_irq+0x34/0x63
>  [<ffffffff8121237d>] ? e1000_open+0x81/0x11f
>  [<ffffffff8129097c>] ? call_netdevice_notifiers+0x45/0x4a
>  [<ffffffff81290d8d>] ? __dev_open+0x97/0xc4
>  [<ffffffff8128e9c5>] ? __dev_change_flags+0xb9/0x13d
>  [<ffffffff81290cc1>] ? dev_change_flags+0x1c/0x51
>  [<ffffffff812d0542>] ? devinet_ioctl+0x26e/0x594
>  [<ffffffff812d174c>] ? inet_ioctl+0x92/0xaa
>  [<ffffffff81281d75>] ? T.1003+0x13/0x32
>  [<ffffffff81282152>] ? sock_ioctl+0x1f2/0x1ff
>  [<ffffffff810ae2d3>] ? do_vfs_ioctl+0x498/0x4e7
>  [<ffffffff81281203>] ? sock_alloc_file+0xb3/0x115
>  [<ffffffff8109f79f>] ? fd_install+0x31/0x5d
>  [<ffffffff810ae364>] ? sys_ioctl+0x42/0x65
>  [<ffffffff81001f3b>] ? system_call_fastpath+0x16/0x1b
> handlers:
> [<ffffffff8120e3c5>] (e1000_intr+0x0/0x103)
> Disabling IRQ #18

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>

hw/ioapic.c

@@ -164,6 +164,7 @@ static void ioapic_set_irq(void *opaque, int vector, int level)
             if (level) {
                 s->irr |= mask;
                 ioapic_service(s);
+                s->irr &= ~mask;
             }
         }
     }