bcm2836: add bcm2836 SoC device

This is the SoC for Raspberry Pi 2.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/Makefile.objs

@@ -11,7 +11,7 @@ obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
 obj-$(CONFIG_DIGIC) += digic.o
 obj-y += omap1.o omap2.o strongarm.o
 obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
-obj-$(CONFIG_RASPI) += bcm2835_peripherals.o
+obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o
 obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
 obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
 obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o

hw/arm/bcm2836.c

@@ -0,0 +1,165 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
+ *
+ * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
+ * Written by Andrew Baumann
+ *
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#include "hw/arm/bcm2836.h"
+#include "hw/arm/raspi_platform.h"
+#include "hw/sysbus.h"
+#include "exec/address-spaces.h"
+
+/* Peripheral base address seen by the CPU */
+#define BCM2836_PERI_BASE       0x3F000000
+
+/* "QA7" (Pi2) interrupt controller and mailboxes etc. */
+#define BCM2836_CONTROL_BASE    0x40000000
+
+static void bcm2836_init(Object *obj)
+{
+    BCM2836State *s = BCM2836(obj);
+    int n;
+
+    for (n = 0; n < BCM2836_NCPUS; n++) {
+        object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
+                          "cortex-a15-" TYPE_ARM_CPU);
+        object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
+                                  &error_abort);
+    }
+
+    object_initialize(&s->control, sizeof(s->control), TYPE_BCM2836_CONTROL);
+    object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
+    qdev_set_parent_bus(DEVICE(&s->control), sysbus_get_default());
+
+    object_initialize(&s->peripherals, sizeof(s->peripherals),
+                      TYPE_BCM2835_PERIPHERALS);
+    object_property_add_child(obj, "peripherals", OBJECT(&s->peripherals),
+                              &error_abort);
+    qdev_set_parent_bus(DEVICE(&s->peripherals), sysbus_get_default());
+}
+
+static void bcm2836_realize(DeviceState *dev, Error **errp)
+{
+    BCM2836State *s = BCM2836(dev);
+    Object *obj;
+    Error *err = NULL;
+    int n;
+
+    /* common peripherals from bcm2835 */
+
+    obj = object_property_get_link(OBJECT(dev), "ram", &err);
+    if (obj == NULL) {
+        error_setg(errp, "%s: required ram link not found: %s",
+                   __func__, error_get_pretty(err));
+        return;
+    }
+
+    object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj, &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    object_property_set_bool(OBJECT(&s->peripherals), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
+                            BCM2836_PERI_BASE, 1);
+
+    /* bcm2836 interrupt controller (and mailboxes, etc.) */
+    object_property_set_bool(OBJECT(&s->control), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, BCM2836_CONTROL_BASE);
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
+        qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
+        qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
+
+    for (n = 0; n < BCM2836_NCPUS; n++) {
+        /* Mirror bcm2836, which has clusterid set to 0xf
+         * TODO: this should be converted to a property of ARM_CPU
+         */
+        s->cpus[n].mp_affinity = 0xF00 | n;
+
+        /* set periphbase/CBAR value for CPU-local registers */
+        object_property_set_int(OBJECT(&s->cpus[n]),
+                                BCM2836_PERI_BASE + MCORE_OFFSET,
+                                "reset-cbar", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        /* start powered off if not enabled */
+        object_property_set_bool(OBJECT(&s->cpus[n]), n >= s->enabled_cpus,
+                                 "start-powered-off", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        object_property_set_bool(OBJECT(&s->cpus[n]), true, "realized", &err);
+        if (err) {
+            error_propagate(errp, err);
+            return;
+        }
+
+        /* Connect irq/fiq outputs from the interrupt controller. */
+        qdev_connect_gpio_out_named(DEVICE(&s->control), "irq", n,
+                qdev_get_gpio_in(DEVICE(&s->cpus[n]), ARM_CPU_IRQ));
+        qdev_connect_gpio_out_named(DEVICE(&s->control), "fiq", n,
+                qdev_get_gpio_in(DEVICE(&s->cpus[n]), ARM_CPU_FIQ));
+
+        /* Connect timers from the CPU to the interrupt controller */
+        qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_PHYS,
+                qdev_get_gpio_in_named(DEVICE(&s->control), "cntpsirq", n));
+        qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_VIRT,
+                qdev_get_gpio_in_named(DEVICE(&s->control), "cntvirq", n));
+    }
+}
+
+static Property bcm2836_props[] = {
+    DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus, BCM2836_NCPUS),
+    DEFINE_PROP_END_OF_LIST()
+};
+
+static void bcm2836_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->props = bcm2836_props;
+    dc->realize = bcm2836_realize;
+
+    /*
+     * Reason: creates an ARM CPU, thus use after free(), see
+     * arm_cpu_class_init()
+     */
+    dc->cannot_destroy_with_object_finalize_yet = true;
+}
+
+static const TypeInfo bcm2836_type_info = {
+    .name = TYPE_BCM2836,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(BCM2836State),
+    .instance_init = bcm2836_init,
+    .class_init = bcm2836_class_init,
+};
+
+static void bcm2836_register_types(void)
+{
+    type_register_static(&bcm2836_type_info);
+}
+
+type_init(bcm2836_register_types)

include/hw/arm/bcm2836.h

@@ -0,0 +1,35 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
+ *
+ * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
+ * Written by Andrew Baumann
+ *
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#ifndef BCM2836_H
+#define BCM2836_H
+
+#include "hw/arm/arm.h"
+#include "hw/arm/bcm2835_peripherals.h"
+#include "hw/intc/bcm2836_control.h"
+
+#define TYPE_BCM2836 "bcm2836"
+#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836)
+
+#define BCM2836_NCPUS 4
+
+typedef struct BCM2836State {
+    /*< private >*/
+    DeviceState parent_obj;
+    /*< public >*/
+
+    uint32_t enabled_cpus;
+
+    ARMCPU cpus[BCM2836_NCPUS];
+    BCM2836ControlState control;
+    BCM2835PeripheralState peripherals;
+} BCM2836State;
+
+#endif /* BCM2836_H */