improve error handling during module load, by changing:
bool module_load(const char *prefix, const char *lib_name);
void module_load_qom(const char *type);
to:
int module_load(const char *prefix, const char *name, Error **errp);
int module_load_qom(const char *type, Error **errp);
where the return value is:
-1 on module load error, and errp is set with the error
0 on module or one of its dependencies are not installed
1 on module load success
2 on module load success (module already loaded or built-in)
module_load_qom_one has been introduced in:
commit 28457744c3 ("module: qom module support"), which built on top of
module_load_one, but discarded the bool return value. Restore it.
Adapt all callers to emit errors, or ignore them, or fail hard,
as appropriate in each context.
Replace the previous emission of errors via fprintf in _some_ error
conditions with Error and error_report, so as to emit to the appropriate
target.
A memory leak is also fixed as part of the module_load changes.
audio: when attempting to load an audio module, report module load errors.
Note that still for some callers, a single issue may generate multiple
error reports, and this could be improved further.
Regarding the audio code itself, audio_add() seems to ignore errors,
and this should probably be improved.
block: when attempting to load a block module, report module load errors.
For the code paths that already use the Error API, take advantage of those
to report module load errors into the Error parameter.
For the other code paths, we currently emit the error, but this could be
improved further by adding Error parameters to all possible code paths.
console: when attempting to load a display module, report module load errors.
qdev: when creating a new qdev Device object (DeviceState), report load errors.
If a module cannot be loaded to create that device, now abort execution
(if no CONFIG_MODULE) or exit (if CONFIG_MODULE).
qom/object.c: when initializing a QOM object, or looking up class_by_name,
report module load errors.
qtest: when processing the "module_load" qtest command, report errors
in the load of the module.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929093035.4231-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve readability of audio out.voices test:
If 1 is logged and set after positive test, 1 should be tested.
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221012114925.5084-3-hk@zapateado.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The calculation of the buffer size needed to store audio samples
after resampling is wrong for audio recording. For audio recording
sw->ratio is calculated as
sw->ratio = frontend sample rate / backend sample rate.
From this follows
frontend samples = frontend sample rate / backend sample rate
* backend samples
frontend samples = sw->ratio * backend samples
In 2 of 3 places in the audio recording code where sw->ratio
is used in a calculation to get the number of frontend frames,
the calculation is wrong. Fix this. The 3rd formula in
audio_pcm_sw_read() is correct.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/71
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split out the code in audio_get_avail() that calculates the
buffer size that the audio frontend can read. This is similar
to the code changes in audio_get_free().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename and refactor audio_sw_bytes_free(). This function is not
limited to calculate the free audio buffer size. The renamed
function returns the number of frames instead of bytes.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Swap the rate and info parameters of the audio_rate_get_bytes()
function to align the parameter order with the rest of the
audio_rate_*() functions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch needs two new rate control functions. The first
one returns the bytes needed at call time to maintain the
selected rate. The second one adjusts the bytes actually sent.
Split the audio_rate_get_bytes() function into these two
functions and reintroduce audio_rate_get_bytes().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Run the downstream playback queue even if the emulated audio
device didn't write new samples. There still may be buffered
audio samples downstream.
This is for the -audiodev out.mixing-engine=off case. Commit
a8a98cfd42 ("audio: run downstream playback queue uncondition-
ally") fixed the out.mixing-engine=on case.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix GUS audio playback with out.mixing-engine=off.
The GUS audio device needs to know the amount of samples to
produce in advance.
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
and start the cartoon.exe demo in a FreeDOS guest. The demo file
is available on the download page of the GUSemu32 author.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refactoring the code in audio_run_out() avoids code duplication
in the next patch. There's no functional change.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220923183640.8314-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit ab32b78cd1 "audio: Simplify audio_bug() removing old code"
introduced abort() in audio_bug() for regular builds.
audio_bug() was never meant to abort QEMU for the following
reasons.
- There's code in audio_bug() that expects audio_bug() gets
called more than once with error condition true. The variable
'shown' is only 0 on first error.
- All call sites test the return code of audio_bug(), print
an error context message and handle the errror.
- The abort() in audio_bug() enables a class of guest-triggered
aborts similar to the Launchpad Bug #1910603 at
https://bugs.launchpad.net/bugs/1910603.
Fixes: ab32b78cd1 "audio: Simplify audio_bug() removing old code"
Buglink: https://bugs.launchpad.net/bugs/1910603
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220917131626.7521-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sndio is the native API used by OpenBSD, although it has been ported to
other *BSD's and Linux (packages for Ubuntu, Debian, Void, Arch, etc.).
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Alexandre Ratchov <alex@caoua.org>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <YxibXrWsrS3XYQM3@vm1.arverb.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
add a simple help option for -audio and -audiodev
to show the list of available drivers, and document them.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20220908081441.7111-1-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If you specify a known backend but it isn't compiled in, or failed to
initialize, you get a simple warning and the "none" backend as a
fallback, and QEMU runs happily:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
audio: warning: Using timer based audio emulation
...
Instead, QEMU should fail to start:
$ qemu-system-x86_64 -audiodev id=audio,driver=dsound
audio: Unknown audio driver `dsound'
$
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1983493
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220822131021.975656-1-marcandre.lureau@redhat.com>
-audio is used like "-audio pa,model=sb16". It is almost as simple as
-soundhw, but it reuses the -audiodev parsing machinery and attaches an
audiodev to the newly-created device. The main 'feature' is that
it knows about adding the codec device for model=intel-hda, and adding
the audiodev to the codec device.
In the future, it could be extended to support default models or
builtin devices, just like -nic, or even a default backend. For now,
keep it simple.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Without this change audio_bug aborts when the bug condition is met,
which discards following useful logs. Call abort after such logs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220306063202.27331-1-akihiko.odaki@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit ff095e5231 "audio: api for mixeng code free backends"
introduced another FIFO for the audio subsystem with exactly the
same size as the mixing-engine FIFO. Most audio backends use
this generic FIFO. The generic FIFO used together with the
mixing-engine FIFO doubles the audio FIFO size, because that's
just two independent FIFOs connected together in series.
For audio playback this nearly doubles the playback latency.
This patch restores the effective mixing-engine playback buffer
size to a pre v4.2.0 size by only accepting the amount of
samples for the mixing-engine queue which the downstream queue
accepts.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220301191311.26695-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit cbaf25d1f5.
Since previous commit every audio backend has a pcm_ops function
table. It's no longer necessary to test if the table is available.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a pcm_ops function table for the capture backend. This avoids
additional code in the next patches to test if the pcm_ops table
is available.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the code to copy the playback stream in sequential order.
The advantage can be seen in the next patches where the stream
copy operation effectively becomes a write through operation.
The following diagram shows the average buffer fill level and
the stream copy sequence. ### represents a timer_period sized
chunk. The rest of the buffer sizes are not to scale.
With current code:
|--------| |#####111| |---#####|
sw->buf mix_buf backend buffer
1. clip
|--------| |---#####| |111##222|
sw->buf mix_buf backend buffer
2. write to audio device
333 -> |--------| |---#####| |---111##| -> 222
sw->buf mix_buf backend buffer
3a. sw device write
|-----333| |---#####| |---111##|
sw->buf mix_buf backend buffer
3b. resample and mix
|--------| |333#####| |---111##|
sw->buf mix_buf backend buffer
With this patch:
111 -> |--------| |---#####| |---#####|
sw->buf mix_buf backend buffer
1a: sw device write
|-----111| |---#####| |---#####|
sw->buf mix_buf backend buffer
1b. resample and mix
|--------| |111##222| |---#####|
sw->buf mix_buf backend buffer
2. clip
|--------| |---111##| |222##333|
sw->buf mix_buf backend buffer
3. write to audio device
|--------| |---111##| |---222##| -> 333
sw->buf mix_buf backend buffer
The effective total playback buffer size is reduced by
timer_period.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify code by inlining function audio_pcm_sw_get_rpos_in()
at the only call site and remove the duplicated audio_bug()
test.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function audio_pcm_hw_conv_in() similar to the existing
counterpart function audio_pcm_hw_clip_out(). This function reduces
the number of calls to the pcm_ops functions get_buffer_in() and
put_buffer_in(). That's one less call to get_buffer_in() and
put_buffer_in() every time the conv_buffer wraps around.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the function audio_pcm_hw_clip_out() into the correct
section 'Hard voice (playback)'.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220301191311.26695-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace open-coded buffer arithmetic with the new function
audio_ring_posb(). That's the position in backward direction
of a given point at a given distance.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220301191311.26695-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The audio migration vmstate is empty, and always has been; we can't
just remove it though because an old qemu might send it us.
Changes with -audiodev now mean it's sometimes created when it didn't
used to be, and can confuse migration to old qemu.
Change it so that vmstate_audio is never sent; if it's received it
should still be accepted, and old qemu's shouldn't be too upset if it's
missing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210809170956.78536-1-dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the code to generate the pa_context_new() application name
argument to a function in audio/audio.c. The new function
audio_application_name() will also be used in the jackaudio
backend.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix problems about braces:
-braces are necessary for all arms of if/for/while statements
-else should follow close brace '}'
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-2-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Break the unnecessary dependency of the generic buffer management
code on mixing-engine. This is required for the next patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split off pcm_ops function run_buffer_in from get_buffer_in and
call run_buffer_in before get_buffer_in.
The next patch only needs the generic buffer management part
from audio_generic_get_buffer_in().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check whenever we actually found the spiceaudio driver
before flipping the can_be_default field.
Fixes: f0c4555edf ("audio: remove qemu_spice_audio_init()")
Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977301
Reported-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201215081151.20095-1-kraxel@redhat.com>
This code (introduced in commit 1d14ffa97e, Oct 2005)
is likely unused since years. Time to remove it. If
the condition is true, simply call abort().
Suggested-by: Gerd Hoffmann <gerd@kraxel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201210223506.263709-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit removed the last call site of
audio_is_cleaning_up(). Remove the now unused function.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Handle the spice special case in audio_init instead.
With the qemu_spice_audio_init() symbol dependency being
gone we can build spiceaudio as module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200916084117.21828-2-kraxel@redhat.com
Run the downstream playback queue even if there are no samples
in the mixing engine buffer. The downstream queue may still have
queued samples.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_write should work exactly like
audio_pcm_hw_run_out. It's a very similar function working on a
different buffer.
This patch significantly reduces the number of drop-outs with
the DirectSound backend. To hear the difference start qemu with
-audiodev dsound,id=audio0,out.mixing-engine=off and play a
song in the guest with and without this patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes unnecessary calls to the pcm_ops function
put_buffer_in(). No audio backend needs this call if the
returned length of pcm_ops function get_buffer_in() is zero.
For the DirectSound backend this prevents a call to
dsound_unlock_in() without a preceding call to dsound_lock_in().
While Windows doesn't complain it seems wrong anyway.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_read should work exactly like
audio_pcm_hw_run_in. It's a very similar function working
on a different buffer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The playback rate with the spiceaudio backend is currently too
fast if there's no spice client connected or the spice client
can't play audio. Rate limit the audio playback stream in all
cases. To calculate the rate correctly the limiter has to know
the maximum buffer size.
Fixes: 8c198ff065 ("spiceaudio: port to the new audio backend api")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch allows the audio backends get_buffer_out() functions
to drop audio data and mitigates a bug reported on the qemu-devel
mailing list.
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03832.html
The new rules for the variables buf and size returned by
get_buffer_out() are:
size == 0: Downstream playback buffer is full. Retry later.
size > 0, buf != NULL: Copy size bytes to buf for playback.
size > 0, buf == NULL: Drop size bytes.
The audio playback rate with spiceaudio for the no audio case is
too fast, but that's what we had before commit fb35c2cec5
"audio/dsound: fix invalid parameters error". The complete fix
comes with the next patch.
Reported-by: Qi Zhou <atmgnd@outlook.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
