Compared to other SSE instructions, VUCOMISx and VCOMISx are different:
the single and double precision versions are distinguished through a
prefix, however they use no-prefix and 0x66 for SS and SD respectively.
Scalar values usually are associated with 0xF2 and 0xF3.
Because of these, they incorrectly perform a 128-bit memory load instead
of a 32- or 64-bit load. Fix this by writing a custom decoding function.
I tested that the reproducer is fixed and the test-avx output does not
change.
Reported-by: Gabriele Svelto <gsvelto@mozilla.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1637
Fixes: f8d19eec0d ("target/i386: reimplement 0x0f 0x28-0x2f, add AVX", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CR0.TS=1, execution of x87 FPU, MMX, and some SSE instructions will
cause a Device Not Available (DNA) exception (#NM). System software uses
this exception event to lazily context switch FPU state.
Before this patch, enter_mmx helpers may be generated just before #NM
generation, prematurely resetting FPU state before the guest has a
chance to save it.
The LDG instruction loads the tag from a memory address (identified
by [Xn + offset]), and then merges that tag into the destination
register Xt. We implemented this correctly for the case when
allocation tags are enabled, but didn't get it right when ATA=0:
instead of merging the tag bits into Xt, we merged them into the
memory address [Xn + offset] and then set Xt to that.
Merge the tag bits into the old Xt value, as they should be.
Cc: qemu-stable@nongnu.org
Fixes: c15294c1e3 ("target/arm: Implement LDG, STG, ST2G instructions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 7e2788471f9e079fff696a694721a7d41a451839)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The atomic memory operations are supposed to return the old memory
data value in the destination register. This value is not
sign-extended, even if the operation is the signed minimum or
maximum. (In the pseudocode for the instructions the returned data
value is passed to ZeroExtend() to create the value in the register.)
We got this wrong because we were doing a 32-to-64 zero extend on the
result for 8 and 16 bit data values, rather than the correct amount
of zero extension.
Fix the bug by using ext8u and ext16u for the MO_8 and MO_16 data
sizes rather than ext32u.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230602155223.2040685-2-peter.maydell@linaro.org
(cherry picked from commit 243705aa6ea3465b20e9f5a8bfcf36d3153f3c10)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some of the PMU hflags bits can go out of synch, for example a store to
MMCR0 with PMCjCE=1 fails to update hflags correctly and results in
hflags mismatch:
qemu: fatal: TCG hflags mismatch (current:0x2408003d rebuilt:0x240a003d)
This can be reproduced by running perf on a recent machine.
Some of the fragility here is the duplication of PMU hflags calculations.
This change consolidates that in a single place to update pmu-related
hflags, to be called after a well defined state changes.
The post-load PMU update is pulled out of the MSR update because it does
not depend on the MSR value.
Fixes: 8b3d1c49a9 ("target/ppc: Add new PMC HFLAGS")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230530130447.372617-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 6494d2c1fd4ebc37b575130399a97a1fcfff1afc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ppc hypervisors turn HEAI interrupts into program interrupts injected
into the guest that executed the illegal instruction, if the hypervisor
doesn't handle it some other way.
The nested-hv implementation failed to account for this HEAI->program
conversion. The virtual hypervisor wants to see the HEAI when running
a nested guest, so that interrupt type can be returned to its KVM
caller.
Fixes: 7cebc5db2e ("target/ppc: Introduce a vhyp framework for nested HV support")
Cc: balaton@eik.bme.hu
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230530132127.385001-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 6c242e79b876b3570b8fd2f10f2a502467758e56)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
lqarx does not set cpu_reserve, which causes stqcx. to never succeed.
Cc: qemu-stable@nongnu.org
Fixes: 94bf265867 ("target/ppc: Use atomic load for LQ and LQARX")
Fixes: 57b38ffd0c6 ("target/ppc: Use tcg_gen_qemu_{ld,st}_i128 for LQARX, LQ, STQ")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605025445.161932-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit e025e8f5a8a7e32409bb4c7c509d752486113188)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In qemu-user-s390x, /proc/cpuinfo contains:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 400000, machine = 8561
The highest nibble is supposed to contain the CPU address, but it's off
by 2 bits. Fix the shift value and provide a symbolic constant for it.
With the fix we get:
processor 0: version = 00, identification = 000000, machine = 8561
processor 1: version = 00, identification = 100000, machine = 8561
Fixes: 076d4d39b6 ("s390x/cpumodel: wire up cpu type + id for TCG")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230605113950.1169228-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 71b11cbe1c34411238703abe24bfaf2e9712c30d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
LCBB is supposed to overwrite only the bottom 32 bits, but QEMU
erroneously overwrites the entire register.
Fixes: 6d9303322e ("s390x/tcg: Implement LOAD COUNT TO BLOCK BOUNDARY")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 079181b9bc60389e106009a1530d3cc42256f567)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For M-profile, there is no guest-facing A-profile format FSR, but we
still use the env->exception.fsr field to pass fault information from
the point where a fault is raised to the code in
arm_v7m_cpu_do_interrupt() which interprets it and sets the M-profile
specific fault status registers. So it doesn't matter whether we
fill in env->exception.fsr in the short format or the LPAE format, as
long as both sides agree. As it happens arm_v7m_cpu_do_interrupt()
assumes short-form.
In compute_fsr_fsc() we weren't explicitly choosing short-form for
M-profile, but instead relied on it falling out in the wash because
arm_s1_regime_using_lpae_format() would be false. This was broken in
commit 452c67a4 when we added v8R support, because we said "PMSAv8 is
always LPAE format" (as it is for v8R), forgetting that we were
implicitly using this code path on M-profile. At that point we would
hit a g_assert_not_reached():
ERROR:../../target/arm/internals.h:549:arm_fi_to_lfsc: code should not be reached
#7 0x0000555555e055f7 in arm_fi_to_lfsc (fi=0x7fffecff9a90) at ../../target/arm/internals.h:549
#8 0x0000555555e05a27 in compute_fsr_fsc (env=0x555557356670, fi=0x7fffecff9a90, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff9a1c)
at ../../target/arm/tlb_helper.c:95
#9 0x0000555555e05b62 in arm_deliver_fault (cpu=0x555557354800, addr=268961344, access_type=MMU_INST_FETCH, mmu_idx=1, fi=0x7fffecff9a90)
at ../../target/arm/tlb_helper.c:132
#10 0x0000555555e06095 in arm_cpu_tlb_fill (cs=0x555557354800, address=268961344, size=1, access_type=MMU_INST_FETCH, mmu_idx=1, probe=false, retaddr=0)
at ../../target/arm/tlb_helper.c:260
The specific assertion changed when commit fcc7404eff24b4c added
"assert not M-profile" to arm_is_secure_below_el3(), because the
conditions being checked in compute_fsr_fsc() include
arm_el_is_aa64(), which will end up calling arm_is_secure_below_el3()
and asserting before we try to call arm_fi_to_lfsc():
#7 0x0000555555efaf43 in arm_is_secure_below_el3 (env=0x5555574665a0) at ../../target/arm/cpu.h:2396
#8 0x0000555555efb103 in arm_is_el2_enabled (env=0x5555574665a0) at ../../target/arm/cpu.h:2448
#9 0x0000555555efb204 in arm_el_is_aa64 (env=0x5555574665a0, el=1) at ../../target/arm/cpu.h:2509
#10 0x0000555555efbdfd in compute_fsr_fsc (env=0x5555574665a0, fi=0x7fffecff99e0, target_el=1, mmu_idx=1, ret_fsc=0x7fffecff996c)
Avoid the assertion and the incorrect FSR format selection by
explicitly making M-profile use the short-format in this function.
Fixes: 452c67a42704 ("target/arm: Enable TTBCR_EAE for ARMv8-R AArch32")a
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1658
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230523131726.866635-1-peter.maydell@linaro.org
(cherry picked from commit d7fe699be54b2cbb8e4ee37b63588b3458a49da7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vzeroall: xmm_regs should be used instead of xmm_t0
vpermdq: bit 3 and 7 of imm should be considered
Signed-off-by: Xinyu Li <lixinyu20s@ict.ac.cn>
Message-Id: <20230510145222.586487-1-lixinyu20s@ict.ac.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 056d649007bc9fdae9f1d576e77c1316e9a34468)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Compared to other SSE instructions, VUCOMISx and VCOMISx are different:
the single and double precision versions are distinguished through a
prefix, however they use no-prefix and 0x66 for SS and SD respectively.
Scalar values usually are associated with 0xF2 and 0xF3.
Because of these, they incorrectly perform a 128-bit memory load instead
of a 32- or 64-bit load. Fix this by writing a custom decoding function.
I tested that the reproducer is fixed and the test-avx output does not
change.
Reported-by: Gabriele Svelto <gsvelto@mozilla.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1637
Fixes: f8d19eec0d ("target/i386: reimplement 0x0f 0x28-0x2f, add AVX", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2b55e479e6fcbb466585fd25077a50c32e10dc3a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If vd == vm, copy vm to scratch, so that we can pre-zero
the output and still access the gather indicies.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1612
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504104232.1877774-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a6771f2f5cbfbf312e2fb5b1627f38a6bf6321d0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's RRE, not RXE.
Found by running valgrind's none/tests/s390x/bfp-2.
Fixes: 86b59624c4 ("s390x/tcg: Implement LOAD LENGTHENED short HFP to long HFP")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230511134726.469651-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 970641de01908dd09b569965e78f13842e5854bc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context tweak)
Fix a problem similar to the one fixed by commit 703d03a4aaf3
("target/s390x: Fix EXECUTE of relative long instructions"), but now
for relative branches.
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230426235813.198183-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e8ecdfeb30f087574191cde523e846e023911c8d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In function do_extractm() the mask is calculated as
dup_const(1 << (element_width - 1)). '1' being signed int
works fine for MO_8,16,32. For MO_64, on PPC64 host
this ends up becoming 0 on compilation. The vextractdm
uses MO_64, and it ends up having mask as 0.
Explicitly use 1ULL instead of signed int 1 like its
used everywhere else.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1536
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <168319292809.1159309.5817546227121323288.stgit@ltc-boston1.aus.stglabs.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
(cherry picked from commit 6a5d81b17201ab8a95539bad94c8a6c08a42e076)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When I boot a ubuntu image, QEMU output a "Bad icount read" message and exit.
The reason is that when execute helper_mret or helper_sret, it will
cause a call to icount_get_raw_locked (), which needs set can_do_io flag
on cpustate.
Thus we setting this flag when execute these two instructions.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230324064011.976-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit df3ac6da476e346a17bad5bc843de1135a269229)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In several places in the 32-bit Arm translate.c, we try to use
load_cpu_field() to load from a CPUARMState field into a TCGv_i32
where the field is actually 64-bit. This works on little-endian
hosts, but gives the wrong half of the register on big-endian.
Add a new load_cpu_field_low32() which loads the low 32 bits
of a 64-bit field into a TCGv_i32. The new macro includes a
compile-time check against accidentally using it on a field
of the wrong size. Use it to fix the two places in the code
where we were using load_cpu_field() on a 64-bit field.
This fixes a bug where on big-endian hosts the guest would
crash after executing an ERET instruction, and a more corner
case one where some UNDEFs for attempted accesses to MSR
banked registers from Secure EL1 might go to the wrong EL.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230424153909.1419369-2-peter.maydell@linaro.org
(cherry picked from commit 7f3a3d3dc433dc06c0adb480729af80f9c8e3739)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit ad5c6ddea327758daa9f0e6edd916be39dce7dca)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The previous patch wrongly replaced FEAT_XSAVE_XCR0_{LO|HI} with
FEAT_XSAVE_XSS_{LO|HI} in CPUID(EAX=12,ECX=1):{ECX,EDX}. As a result,
SGX enclaves only supported SSE and x87 feature (xfrm=0x3).
Fixes: 301e90675c ("target/i386: Enable support for XSAVES based features")
Signed-off-by: Yang Zhong <yang.zhong@linux.intel.com>
Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20230406064041.420039-1-yang.zhong@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 72497cff896fecf74306ed33626c30e43633cdd6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1421
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230227225832.816605-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9094f9551df849f68d40236092d8af3ed869d093)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
GCC13 reports an error :
../target/s390x/tcg/fpu_helper.c:123:5: error: conflicting types for ‘float_comp_to_cc’ due to enum/integer mismatch; have ‘int(CPUS390XState *, FloatRelation)’ {aka ‘int(struct CPUArchState *, FloatRelation)’} [-Werror=enum-int-mismatch]
123 | int float_comp_to_cc(CPUS390XState *env, FloatRelation float_compare)
| ^~~~~~~~~~~~~~~~
In file included from ../target/s390x/tcg/fpu_helper.c:23:
../target/s390x/s390x-internal.h:302:5: note: previous declaration of ‘float_comp_to_cc’ with type ‘int(CPUS390XState *, int)’ {aka ‘int(struct CPUArchState *, int)’}
302 | int float_comp_to_cc(CPUS390XState *env, int float_compare);
| ^~~~~~~~~~~~~~~~
Fixes: 71bfd65c5f ("softfloat: Name compare relation enum")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230321161609.716474-3-clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f79283fdb8efca0cd6e818bebad12f367e83f6e6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The code uses the wrong base for relative addressing: it should use the
target instruction address and not the EXECUTE's address.
Fix by storing the target instruction address in the new CPUS390XState
member and loading it from the code generated by gen_ri2().
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230316210751.302423-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 703d03a4aaf38f285555ef5422ba5ce075416fc4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use tcg_constant_i64. Adjust in2_mri2_* to allocate a new
temporary for the output, using gen_ri2 for the address.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit bdbc87e323ee417735141ed2b11dab0091b57593)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The second operand of COMPARE HALFWORD RELATIVE LONG is a signed
halfword, it does not have the same size as the first operand.
Fixes: a7e836d5eb ("target-s390: Convert COMPARE, COMPARE LOGICAL")
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230310114157.3024170-2-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 54fce97cfcaf5463ee5f325bc1f1d4adc2772f38)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
"note_size" can be smaller than sizeof(note), so unconditionally calling
memset(notep, 0, sizeof(note)) could cause a memory corruption here in
case notep has been allocated dynamically, thus let's use note_size as
length argument for memset() instead.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: 113d8f4e95 ("s390x: pv: Add dump support")
Message-Id: <20230214141056.680969-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit eb60026120081430d554c9cabaa36c4ac271fce0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We did not correctly handle N >= operand size.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114233206.3118472-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9ad2ba6e8e7fc195d0dd0b76ab38bd2fceb1bdd4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When ADCX is followed by ADOX or vice versa, the second instruction's
carry comes from EFLAGS and the condition codes use the CC_OP_ADCOX
operation. Retrieving the carry from EFLAGS is handled by this bit
of gen_ADCOX:
tcg_gen_extract_tl(carry_in, cpu_cc_src,
ctz32(cc_op == CC_OP_ADCX ? CC_C : CC_O), 1);
Unfortunately, in this case cc_op has been overwritten by the previous
"if" statement to CC_OP_ADCOX. This works by chance when the first
instruction is ADCX; however, if the first instruction is ADOX,
ADCX will incorrectly take its carry from OF instead of CF.
Fix by moving the computation of the new cc_op at the end of the function.
The included exhaustive test case fails without this patch and passes
afterwards.
Because ADCX/ADOX need not be invoked through the VEX prefix, this
regression bisects to commit 16fc5726a6 ("target/i386: reimplement
0x0f 0x38, add AVX", 2022-10-18). However, the mistake happened a
little earlier, when BMI instructions were rewritten using the new
decoder framework.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1471
Reported-by: Paul Jolly <https://gitlab.com/myitcv>
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 60c7dd22e1383754d5f150bc9f7c2785c662a7b6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We forgot to set cc_src, which is used for computing C.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1370
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114180601.2993644-1-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 99282098dc74c2055bde5652bde6cf0067d0c370)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There were two problems here: not limiting the input to operand bits,
and not correctly handling large extraction length.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1372
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114230542.3116013-3-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b14c0098975264ed03144f145bca0179a6763a07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
During the conversion, the test against get_phys_addr_lpae got inverted,
meaning that successful translations went to the 'failed' label.
Cc: qemu-stable@nongnu.org
Fixes: f3639a64f6 ("target/arm: Use softmmu tlbs for page table walking")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1417
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230114054605.2977022-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 4a1103afb16efa64600ef0c2b03afe60f689fdc9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit
to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu
uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3
write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is
enabled and exposed to the guest. As a result EL3 writes of that bit are
ignored.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 08899b5c68a55a3780d707e2464073c8f2670d31)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't dereference CPUTLBEntryFull until we verify that
the page is valid. Move the other user-only info field
updates after the valid check to match.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230104190056.305143-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit ce848378b999214777fa984a8a0a3e3deb1cf687)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Failure to set pc_succ_insn may result in a TB covering zero bytes,
which triggers an assert within the code generator.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org>
[ Changes by AF:
- Add missing run-plugin-test-noc-% line
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit ec2918b467228e7634f1dd5f35033ad3021b6ef7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The check semihosting_enabled() wants to know if the guest is
currently in user mode. Unlike the other cases the test was inverted
causing us to block semihosting calls in non-EL0 modes.
Cc: qemu-stable@nongnu.org
Fixes: 19b26317e9 (target/arm: Honour -semihosting-config userspace=on)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9788d4c007cbde7cda1b7a577b8b836335eb2b73)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The values in env->flags are a subset of tb->flags.
Restore only the bits that belong.
Cc: qemu-stable@nongnu.org
Fixes: ab419fd8a0 ("target/sh4: Fix TB_FLAG_UNALIGN")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20221212011345.GA2235238@roeck-us.net>
[rth: Reduce to only the the superh_cpu_synchronize_from_tb change]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit bc2331635ce18ff068d2bb1e493bc546e1f786e1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The SET ADDRESS SPACE CONTROL FAST instruction is not privileged, it can be
used from problem space, too. Just the switching to the home address space
is privileged and should still generate a privilege exception. This bug is
e.g. causing programs like Java that use the "getcpu" vdso kernel function
to crash (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990417#26 ).
While we're at it, also check if DAT is not enabled. In that case the
instruction is supposed to generate a special operation exception.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/655
Message-Id: <20221201184443.136355-1-thuth@redhat.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In get_physical_address, the canonical address check failed to
set TranslateFault.stage2, which resulted in an uninitialized
read from the struct when reporting the fault in x86_cpu_tlb_fill.
Adjust all error paths to use structure assignment so that the
entire struct is always initialized.
Reported-by: Daniel Hoffman <dhoff749@gmail.com>
Fixes: 9bbcf37219 ("target/i386: Reorg GET_HPHYS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221201074522.178498-1-richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1324
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMX state is saved/restored by FSAVE/FRSTOR so the instructions are
not illegal opcodes even if CR4.OSFXSR=0. Make sure that validate_vex
takes into account the prefix and only checks HF_OSFXSR_MASK in the
presence of an SSE instruction.
Fixes: 20581aadec ("target/i386: validate VEX prefixes via the instructions' exception classes", 2022-10-18)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1350
Reported-by: Helge Konetzka (@hejko on gitlab.com)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
