Since commit cfc87e00 "block/vpc.c: Handle write failures in
get_image_offset()" older versions of gcc (in this case 4.7) incorrectly
warn that "ret" can be used uninitialised in vpc_co_pwritev().
Setting ret to 0 at the start of vpc_co_pwritev() prevents the warning
in gcc 4.7 and enables compilation with -Werror to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500625265-23844-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc 7 complains that the sprintf() might write a null byte beyond the
end of the tail buffer. That is wrong, but we can silence it by making
i unsigned (it can never be negative anyway, see the if condition right
before). For some reason, this allows gcc to suddenly accurately
calculate the range of i so we can give the tail[] array the exact size
it needs to have (which is 8 bytes) without gcc complaining.
In addition, let us convert the sprintf() to snprintf(), because that is
always nicer, and add an assertion about the range of the return value
afterwards so we can see that "8 - len" will never be negative and thus
"entry->name + MIN(j, 8 - len)" will never be out of bounds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prevents some host to guest memory content leaks.
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Write support works again when image contains non-ASCII names. It is either the
case when user created a non-ASCII filename, or when initial directory contained
a non-ASCII filename (since 0c36111f57)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also add links to related compatibility problems.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of listing only monitor-owned BlockBackends in query-block, also
add those anonymous BlockBackends that are owned by a qdev device and as
such under the control of the user.
This allows using query-block to inspect BlockBackends for the modern
configuration syntax with -blockdev and -device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This patch replaces the blk_next() loop in query-block by a
blk_all_next() one so that we also get access to BlockBackends that
aren't owned by the monitor. For now, the next thing we do is check
whether each BB has a name, so there is no semantic difference.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Coverity (CID 1355236) points out that get_image_offset() doesn't check that
it actually succeeded in writing the updated block bitmap to the file.
Check the error return from bdrv_pwrite_sync() and propagate an error
response back up to the function which calls get_image_offset() for
a write so that it can return the error to its caller.
get_sector_offset() is only used for reads, but we move it to the
same API for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function vmdk_read_cid() can fail if the read on the underlying
block device fails, or if there's a format error in the VMDK file.
However its API doesn't provide a mechanism to report these errors,
and in some cases we were returning a CID of 0 and in some cases a
CID of 0xffffffff, either of which might potentially be valid values.
Change the function to return 0 on success or a negative errno, and
return the CID via a uint32_t* argument. Update the callsites to
handle and propagate the error appropriately.
This fixes in passing a Coverity-spotted issue (CID 1350038) where
we weren't checking the return value from sscanf().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I can't see how overlay_bs could become NULL with the current code, but
other code in this function already checks it and we can make Coverity
happy with this check, so let's add it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We've had a shadowed 'ret' variable, which risks returning the wrong
value, introduced in commit b9c64947.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170710150559.30163-1-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The coroutine may run in a different AioContext, causing the
fd handler to busy wait. Fix this by resetting the handler
in restart_coroutine, before the coroutine is restarted.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-12-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This makes the driver thread-safe. The CoMutex is dropped temporarily
while accessing the data clusters or the backing file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-10-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be used in the next patch, which will call bdrv_qed_do_open
with a CoMutex taken. bdrv_qed_init_state provides a nice place to
initialize it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-9-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will let the callback take a CoMutex in the next patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This part is never called for in-place writes, move it away to avoid
the "backwards" coding style typical of callback-based code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-7-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The VirtualBox driver is using a mutex to order all allocating writes,
but it is not protecting accesses to the bitmap because they implicitly
happen under the AioContext mutex. Change this to use a CoRwlock
explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-4-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement the preallocation modes falloc and full for growing qcow2
images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-15-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now alloc_refcount_block() only contains a single fail label, so it
makes more sense to just name it "fail" instead of "fail_block".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can support PREALLOC_MODE_METADATA by invoking preallocate() in
qcow2_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-12-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
preallocate() is and will be called only from places that do not
otherwise need to lock s->lock: Currently that is qcow2_create2(), as of
a future patch it will be called from qcow2_truncate(), too.
It therefore makes sense to move locking that mutex into preallocate()
itself.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds two new parameters to the preallocate() function so we
will be able to use it not just for preallocating a new image but also
for preallocated image growth.
The offset parameter allows the caller to specify a virtual offset from
which to start preallocating. For newly created images this is always 0,
but for preallocating growth this will be the old image length.
The new_length parameter specifies the supposed new length of the image
(basically the "end offset" for preallocation). During image truncation,
bdrv_getlength() will return the old image length so we cannot rely on
its return value then.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By using raw_regular_truncate() in raw_truncate(), we can now easily
support preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, raw_regular_truncate() is intended for setting the size of a
newly created file. However, we also want to use it for truncating an
existing file in which case only the newly added space (when growing)
should be preallocated.
This also means that if resizing failed, we should try to restore the
original file size. This is important when using preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This functionality is part of raw_create() which we will be able to
reuse nicely in raw_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Variables should be declared at the start of a block, and if a certain
parameter value is not supported it may be better to return -ENOTSUP
instead of -EINVAL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use qcow2_calc_prealloc_size() to get the required file size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-7-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image creation options parsed by qcow2_create() are also needed to
implement .bdrv_measure(). Extract the parsing code, including input
validation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-6-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The refcount metadata size calculation is inaccurate and can produce
numbers that are too small. This is bad because we should calculate a
conservative number - one that is guaranteed to be large enough.
This patch switches the approach to a fixed point calculation because
the existing equation is hard to solve when inaccuracies are taken care
of.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-5-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Calculating the preallocated image size will be needed to implement
.bdrv_measure(). Extract the code out into a separate function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-4-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>