Drop test_fail: we know that exit simcall works. Now that it's not run
automatically there's no point in keeping it.
Drop test_pipeline: we're not modeling pipeline, we don't control ccount
and there's no plan to do so.
Enable test_boolean: it won't break on cores without boolean option, it
will do testing on cores with boolean option.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't announce that exit simcall has been invoked: this is just noise.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
slirp has been maintained by the QEMU maintainers and will be
maintained under an independent project soon.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kelly Price <strredwolf@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The slirp COPYRIGHT file is a BSD-3 license. Instead of referring to
another project file, the SPDX license notice present in all source
files states that unequivocally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add SPDX license identifier to clarify the license of files without
explicit license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
reference to BSD license from slirp COPYRIGHT file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit MIT license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit 3-clause BSD license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
In order to make slirp a standalone project, the project must have a
clear license, and be compatible with the GPL or LGPL.
Since commit 2f5f899631 ("Remove the
advertising clause from the slirp license"), slirp is BSD-3. But new
files have been added under slirp/ with QEMU GPL license since then.
The copyright holders have been asked to relicense files to BSD-3 and
gave their permission:
- slirp/dhcpv6.{c,h}
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, Thomas Huth <thuth@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org>
Date: Mon, 11 Mar 2019 16:23:25 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Fine for me. You can change the license of slirp/ncsi.c and
slirp/ncsi-pkt.hto a 3-Clause BSD.
Thanks,
C.
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Peter Maydell <peter.maydell@linaro.org>, Shan Gavin <shan.gavin@gmail.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>, "Marc-André Lureau" <marcandre.lureau@gmail.com>, Gavin Shan <gwshan@linux.vnet.ibm.com>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com> <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org> <CAJ+F1C+hFfsa5gcSdttTP5J+uyDvNdYJWrm9OJM26+Zc1ZQkew@mail.gmail.com> <cc62e1fd-c564-e1b7-d10c-30665b481352@ozlabs.ru> <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com> <CAFEAcA_g=L2LSo=B_5dpJhJJrqFiOb6sswMVohQwpVGiKi_A7w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <4ddf6031-0df1-b3b5-965e-a181266e42b0@kaod.org>
Date: Tue, 12 Mar 2019 11:49:21 +0100
> Is the code in question copyright you personally, or copyright
> IBM as your employer at the time ? If the latter, it is IBM that
> would need to approve the relicensing.
That was done. I had our legal team approve the change of license.
Thanks,
C.
From: Shan Gavin <shan.gavin@gmail.com>
Date: Tue, 12 Mar 2019 15:04:54 +0800
Message-ID: <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com>
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Marc-André Lureau" <marcandre.lureau@gmail.com>, "Cédric Le Goater" <clg@kaod.org>, gwshan@linux.vnet.ibm.com, Peter Maydell <peter.maydell@linaro.org>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
> Gavin, could you reply that you have no objection in relicensing
> ncsi-pkt.h as 3-Clause BSD?
No objection. Please go ahead with the relicensing.
Cheers,
Gavin
- ncsi.c, ncsi-pkt.h
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: Thomas Huth <thuth@redhat.com>
Message-ID: <ed5a9f55-f2e5-298d-58ac-414759e9b491@redhat.com>
Date: Wed, 13 Feb 2019 12:30:32 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Ok, for the records: I'm fine if you change the license of dhcpv6.[ch]
to either 3-Clause BSD or 2-Clause BSD.
Thomas
- vmstate.{c,h}
From: Juan Quintela <quintela@redhat.com>
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>
Cc: QEMU <qemu-devel@nongnu.org>, Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
Subject: Re: Clearing slirp/ license
Date: Tue, 12 Mar 2019 12:43:17 +0100
Message-ID: <87k1h4qpwq.fsf@trasno.org>
> Juan, Could you reply that you have no objection in relicensing the
> vmstate files as 3-Clause BSD?
No problem at all on my side.
Later, Juan.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ for the NC-SI files ]
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Thomas Huth <thuth@redhat.com>
According to commit 2f5f899631 ("Remove
the advertising clause from the slirp license"), Danny Gasparovski
gave permission to license slirp code under 3-clause BSD license:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
I have no objection to having Slirp code in QEMU be licensed under
the 3-clause BSD license.
slirp/COPYRIGHT's initial version in 2004 (commit 5fafdf24) listed
only 3 clauses BUT used the poisonous advertising clause for clause 3
which is the controversial clause of non-free 4-clause (that is, it
appears that the BSD-4 license was copied, and then the WRONG clause
was deleted, when creating COPYRIGHT. Perhaps explained as an easy
mistake to make since 3-clause was created by removing clause 3 of the
4-clause, where you sometimes see the three-clause version with
clauses 1, 2, 4; but more commonly see a renumbered version with
clauses 1, 2, 3 to close the gap. If you pay attention only to clause
numbers instead of content, it can be easy to confuse which clause to
delete to go from 4-clause to 3-clause).
Commit 2f5f89963 removed the poisonous wrong clause on
the grounds of moving from 4-clause to 3-clause; but did not add the
missing clause, which makes it LOOK like the 2-clause version. But I
think we have a decent enough trail showing the intent for 3-clause.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with cleanup-trace-events.pl. Funnies requiring manual
post-processing:
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Emit comments with shortened file names (previous commit).
Limit search to the input file's directory.
Cope with properties tcg (commit b2b36c22bd) and vcpu (commit
3d211d9f4d).
Cope with capital letters in function names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-4-armbru@redhat.com
Message-Id: <20190314180929.27722-4-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Almost all trace-events point to docs/devel/tracing.txt in a comment
right at the beginning. Touch up the ones that don't.
[Updated with Markus' new commit description wording.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-2-armbru@redhat.com
Message-Id: <20190314180929.27722-2-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
target/hppa/trace-events only contains disabled events, resulting in a
trace-dtrace.dtrace file that says "provider qemu {}". SystemTap's
dtrace(1) tool prints a warning when processing this input file.
This patch avoids the error by emitting an empty file instead of
"provider qemu {}" when there are no enabled trace events.
Fixes: 23c3d569f4 ("target/hppa: add TLB trace events")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-3-stefanha@redhat.com
Message-Id: <20190321170831.6539-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the tracefs mountpoint has a very long path we may exceed PATH_MAX.
This is a system misconfiguration and the user must resolve it so that
applications can perform path-based system calls successfully.
This issue does not occur on real-world systems since tracefs is mounted
on /sys/kernel/debug/tracing/, but the compiler is smart enough to
foresee the possibility and warn about the unchecked snprintf(3) return
value. This patch fixes the compiler warning.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-2-stefanha@redhat.com
Message-Id: <20190321170831.6539-2-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few fixes that missed -rc0:
* CPU model documentation updates (Daniel P. Berrangé)
* Fix bogus OSPKE warnings (Eduardo Habkost)
* Work around KVM bugs when handing arch_capabilities
(Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----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=Wg+0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue for -rc1
A few fixes that missed -rc0:
* CPU model documentation updates (Daniel P. Berrangé)
* Fix bogus OSPKE warnings (Eduardo Habkost)
* Work around KVM bugs when handing arch_capabilities
(Eduardo Habkost)
# gpg: Signature made Thu 21 Mar 2019 19:32:02 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
docs: add note about stibp CPU feature for spectre v2
docs: clarify that spec-ctrl is only needed for Spectre v2
i386: Disable OSPKE on CPU model definitions
i386: Make arch_capabilities migratable
i386: kvm: Disable arch_capabilities if MSR can't be set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While running the GCC test suite against 4.0.0-rc0, Kito found a
regression introduced by the decodetree conversion that caused divuw and
remuw to sign-extend their inputs. The ISA manual says they are
supposed to be zero extended:
DIVW and DIVUW instructions are only valid for RV64, and divide the
lower 32 bits of rs1 by the lower 32 bits of rs2, treating them as
signed and unsigned integers respectively, placing the 32-bit
quotient in rd, sign-extended to 64 bits. REMW and REMUW
instructions are only valid for RV64, and provide the corresponding
signed and unsigned remainder operations respectively. Both REMW
and REMUW always sign-extend the 32-bit result to 64 bits, including
on a divide by zero.
Here's Kito's reduced test case from the GCC test suite
unsigned calc_mp(unsigned mod)
{
unsigned a,b,c;
c=-1;
a=c/mod;
b=0-a*mod;
if (b > mod) { a += 1; b-=mod; }
return b;
}
int main(int argc, char *argv[])
{
unsigned x = 1234;
unsigned y = calc_mp(x);
if ((sizeof (y) == 4 && y != 680)
|| (sizeof (y) == 2 && y != 134))
abort ();
exit (0);
}
I haven't done any other testing on this, but it does fix the test case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
break_dependency incorrectly handles the case of dependency on an opcode
that references the same register multiple times. E.g. the following
instruction is translated incorrectly:
{ or a2, a3, a3 ; or a3, a2, a2 }
This happens because resource indices of both dependency graph nodes are
incremented, and a copy for the second instance of the same register in
the ending node is not done.
Only increment resource index of the ending node of the dependency.
Add test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When virtio-vga was added, the intention was to only support it for
those machines where the firmware does not know about virtio-gpu,
and supported VGA legacy hardware before virtio-{gpu,vga} were
introduced.
The Kconfig switch however enabled virtio-vga for all machines with
a PCI bus, and libvirt then prefers it even on hardware where
virtio-gpu would be preferrable. At least for now, only enable
virtio-vga for PC, hppa and pSeries machines, as was the case
before Kconfig dependencies were introduced.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build fails with gcc 9:
crypto/block-luks.c:689:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
689 | be32_to_cpus(&luks->header.payload_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:690:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
690 | be32_to_cpus(&luks->header.key_bytes);
| ^~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:691:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
691 | be32_to_cpus(&luks->header.master_key_iterations);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... a bunch of similar errors...
crypto/block-luks.c:1288:22: error: taking address of packed member of ‘struct QCryptoBlockLUKSKeySlot’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1288 | be32_to_cpus(&luks->header.key_slots[i].stripes);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
All members of the QCryptoBlockLUKSKeySlot and QCryptoBlockLUKSHeader are
naturally aligned and we already check at build time there isn't any
unwanted padding. Drop the QEMU_PACKED attribute.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
TYPE_QAUTHZ is an abstract object of type TYPE_OBJECT. All other
are children of TYPE_QAUTHZ, thus also objects.
Keep INTERFACE_CHECK() for interfaces, and use OBJECT_CHECK() on
objects.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We were never reporting the G_IO_HUP event when an end of file was hit
on the websocket channel.
We also didn't report G_IO_ERR when we hit a fatal error processing the
websocket protocol.
The latter in particular meant that the chardev code would not notice
when an eof/error was encountered on the websocket channel, unless the
guest OS happened to trigger a write operation.
This meant that once the first client had quit, the chardev would never
listen to accept a new client.
Fixes launchpad bug 1816819
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While the stibp CPU feature is not commonly used by guest OS for spectre
mitigation due to its performance impact, it is none the less best
practice to expose it to all guest OS. This allows the guest OS to
decide whether to make use or it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The docs currently say that the spec-ctrl feature is needed for both
Spectre variants, but it is only used to address Spectre v2. Also
remove the note about retpolines. The guest OS is usually treated
as a blackbox from host mgmt pov, so it won't have knowledge about
use of retpolines and thus should unconditionally expose spec-ctrl,
allowing the guest to decide whether to use it or not.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the Cascadelake-Server, Icelake-Client, and
Icelake-Server are always generating the following warning:
qemu-system-x86_64: warning: \
host doesn't support requested feature: CPUID.07H:ECX [bit 4]
This happens because OSPKE was never returned by
GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word().
OSPKE is a runtime flag automatically set by the KVM module or by
TCG code, was always cleared by x86_cpu_filter_features(), and
was not supposed to appear on the CPU model table.
Remove the OSPKE flag from the CPU model table entries, to avoid
the bogus warning and avoid returning invalid feature data on
query-cpu-* QMP commands. As OSPKE was always cleared by
x86_cpu_filter_features(), this won't have any guest-visible
impact.
Include a test case that should detect the problem if we introduce
a similar bug again.
Fixes: c7a88b52f6 ("i386: Add new model of Cascadelake-Server")
Fixes: 8a11c62da9 ("i386: Add new CPU model Icelake-{Server,Client}")
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190319200515.14999-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that kvm_arch_get_supported_cpuid() will only return
arch_capabilities if QEMU is able to initialize the MSR properly,
we know that the feature is safely migratable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM has two bugs in the handling of MSR_IA32_ARCH_CAPABILITIES:
1) Linux commit commit 1eaafe91a0df ("kvm: x86: IA32_ARCH_CAPABILITIES
is always supported") makes GET_SUPPORTED_CPUID return
arch_capabilities even if running on SVM. This makes "-cpu
host,migratable=off" incorrectly expose arch_capabilities on CPUID on
AMD hosts (where the MSR is not emulated by KVM).
2) KVM_GET_MSR_INDEX_LIST does not return MSR_IA32_ARCH_CAPABILITIES if
the MSR is not supported by the host CPU. This makes QEMU not
initialize the MSR properly at kvm_put_msrs() on those hosts.
Work around both bugs on the QEMU side, by checking if the MSR
was returned by KVM_GET_MSR_INDEX_LIST before returning the
feature flag on kvm_arch_get_supported_cpuid().
This has the unfortunate side effect of making arch_capabilities
unavailable on hosts without hardware support for the MSR until bug #2
is fixed on KVM, but I can't see another way to work around bug #1
without that side effect.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This ensures that softmmu directories are culled after a
"./configure --target-list=x86_64-linux-user".
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The result of this typo would be that "select_foo" would be treated as a "select"
keyword followed by "_foo". Nothing too bad, but easy to fix so let's be clean.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we have per-device system memory aliases when DMAR is
disabled by the system. It will slow the system down if there are
lots of devices especially when DMAR is disabled, because each of the
aliased system address space will contain O(N) slots, and rendering
such N address spaces will be O(N^2) complexity.
This patch introduces a shared nodmar memory region and for each
device we only create an alias to the shared memory region. With the
aliasing, QEMU memory core API will be able to detect when devices are
sharing the same address space (which is the nodmar address space)
when rendering the FlatViews and the total number of FlatViews can be
dramatically reduced when there are a lot of devices.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190313094323.18263-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the duplicated initialization code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-alpha
qemu-system-alpha: Unsupported NIC model: e1000
Fixes: d1a95ef4ac
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-hppa
qemu-system-hppa: Unsupported NIC model: e1000
Fixes: 9483cf27dd
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-14-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-sh4 -M r2d
qemu-system-sh4: Unsupported NIC model: rtl8139
Fixes: 7ab58d4c84
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-ppc64 -bios /dev/null -M bamboo
qemu-system-ppc64: Unsupported NIC model: e1000
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190316200818.8265-9-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with --without-default-devices:
$ qemu-system-mips64el -bios /dev/null -M fulong2e
qemu-system-mips64el: Unknown device 'ati-vga' for bus 'PCI'
Aborted (core dumped)
(gdb) bt
#0 0x00007ffff5a2753f in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007ffff5a11895 in __GI_abort () at abort.c:79
#2 0x00005555558768d3 in qdev_create (bus=bus@entry=0x5555562664b0, name=name@entry=0x555555b24efb "ati-vga") at hw/core/qdev.c:131
#3 0x00005555558d15e1 in pci_create_multifunction (bus=bus@entry=0x5555562664b0, devfn=devfn@entry=-1, multifunction=multifunction@entry=false, name=name@entry=0x555555b24efb "ati-vga") at hw/pci/pci.c:2104
#4 0x00005555558d1a7a in pci_create (bus=bus@entry=0x5555562664b0, devfn=devfn@entry=-1, name=name@entry=0x555555b24efb "ati-vga") at hw/pci/pci.c:2121
#5 0x0000555555763081 in mips_fulong2e_init (machine=<optimized out>) at hw/mips/mips_fulong2e.c:352
#6 0x000055555587e23b in machine_run_board_init (machine=0x5555560b2000) at hw/core/machine.c:1030
#7 0x00005555556cbea2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4463
And then:
$ qemu-system-mips64el -bios /dev/null -M fulong2e
qemu-system-mips64el: Unsupported NIC model: rtl8139
Fixes: 862b4a291d and 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with --without-default-devices:
$ qemu-system-mips64 -bios /dev/null -M malta
qemu-system-mips64: Unsupported NIC model: pcnet
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes when configuring with CONFIG_PCI_DEVICES=n:
$ qemu-system-x86_64 -M q35
qemu-system-x86_64: Unsupported NIC model: e1000e
$ qemu-system-x86_64 -M pc
qemu-system-x86_64: Unsupported NIC model: e1000
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-4-philmd@redhat.com>
This fixes when configuring with --without-default-devices:
$ qemu-system-mips64 -bios /dev/null -M malta
qemu-system-mips64: Unknown device 'piix4-usb-uhci' for bus 'PCI'
Fixes: 7c28b925b7
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-2-philmd@redhat.com>
This fixes when configuring with --without-default-devices:
$ qemu-system-ppc -M prep
qemu-system-ppc: Machine type 'prep' is deprecated: use 40p machine type instead
qemu-system-ppc: Unknown device 'isa-pcspk' for bus 'ISA'
Fixes: dd0ff8191a
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190316200818.8265-3-philmd@redhat.com>
It is only needed through I82378, which also selects it.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_I82374 is not needed for PC machines, since they create
i8257 directly instead.
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- mirror: Fix early return from drain (could cause deadlocks)
- vmdk: Fixed probing for version 3 images
- vl: Fix to create migration object before block backends again (fixes
segfault for block drivers that set migration blockers)
- Several minor fixes, documentation and test case improvements
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJckQPFAAoJEH8JsnLIjy/WI98P/2alH9DhtHwg1ufIrWonv8C6
zagmZoaABD8bI6x/YNGF+by7TJpYb2+aHv7ilu99n9ZgbVuVu0H1AlpnBYWBp/a/
Kqjq7eYpS5HNnpwnJHwLH3wFko3sU+7OxQieHcdd/v9ollXaA+w/MLq9Jwgb58jJ
BUwq80D2SHsZchZnTdvF2njWSEf+vYOQ389Uh0pwAL6mTeNontjtjwsIQEKqYJIs
4EI27tmf1kB6IGDw6Ad+K4TbsziblUKIxvM8u+J20BrqV/5zL3TwrAV9sB31Xn6t
ZuBEmNm/dFp1tl5qkJ4feXEaRL9/XFPgLKgaaBwgLDWzdf2MvPcEnkfX2mDTRUB9
5+fDE5i8K8wFN+ITCEApwHUrzuebRm/8Dy+k4IR4k0y85D7EZZWrGC7biw61aZ1z
2MnCIx9a6m3Ht9JrXSiaR3G2XbZkp0dh8o8AQkUk2Ax55P5WVSwR6TIl5aO/xXBz
vdZPCP71KbB3ioii48yvBr8ZVz+Q6NAVPJH19PfwWksIXn/lnKUtoF0T6nV5xmEG
pHGh11I08Pc4FQ6wpV8eLqEcKuOd3Dt9k9hBepKU6AVjfCUbI8Rtd/yO1vWpZw+l
4Q7LO1iC8dr8U9DUBj6AkZChWIJ41X++ArnH5MhSieh4OSmoF4rQ0vg0hYlNaNE/
G/XYHHXJyTz1h7Ty11Cw
=GcJ/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- mirror: Fix early return from drain (could cause deadlocks)
- vmdk: Fixed probing for version 3 images
- vl: Fix to create migration object before block backends again (fixes
segfault for block drivers that set migration blockers)
- Several minor fixes, documentation and test case improvements
# gpg: Signature made Tue 19 Mar 2019 14:59:17 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-iotests: Treat custom TEST_DIR in 051
blockdev: Check @replaces in blockdev_mirror_common
block: Make bdrv_{copy_on_read,crypto_luks,replication} static
blockjob: fix user pause in block_job_error_action
qemu-iotests: Fix 232 for non-qcow2
vl: Fix to create migration object before block backends again
iotests: 153: Wait for an answer to QMP commands
block: Silence Coverity in bdrv_drop_intermediate()
vmdk: Support version=3 in VMDK descriptor files
qapi: fix block-latency-histogram-set description and examples
qcow2: Fix data file error condition in qcow2_co_create()
mirror: Confirm we're quiesced only if the job is paused or cancelled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
