In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds commandline support for the logging level of the
gluster protocol driver, output to stdout. The option is 'debug',
e.g.:
-drive filename=gluster://192.168.15.180/gv2/test.qcow2,debug=9
Debug levels are 0-9, with 9 being the most verbose, and 0 representing
no debugging output. The default is the same as it was before, which
is a level of 4. The current logging levels defined in the gluster
source are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
(From: glusterfs/logging.h)
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
GlusterFS 3.8 contains support for SEEK_DATA and SEEK_HOLE. This makes
it possible to detect sparse areas in files.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upon receiving an I/O error after an fsync, by default gluster will
dump its cache. However, QEMU will retry the fsync, which is especially
useful when encountering errors such as ENOSPC when using the werror=stop
option. When using caching with gluster, however, the last written data
will be lost upon encountering ENOSPC. Using the write-behind-cache
xlator option of 'resync-failed-syncs-after-fsync' should cause gluster
to retain the cached data after a failed fsync, so that ENOSPC and other
transient errors are recoverable.
Unfortunately, we have no way of knowing if the
'resync-failed-syncs-after-fsync' xlator option is supported, so for now
close the fd and set the BDS driver to NULL upon fsync error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Move qemu_gluster_close() further up in the file, in preparation
for the next patch, to avoid a forward declaration.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Upon error, gluster will call the aio callback function with a
ret value of -1, with errno set to the proper error value. If
we set the acb->ret value to the return value in the callback,
that results in every error being EPERM (i.e. 1). Instead, set
it to the proper error result.
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is simpler now that the driver has been converted to coroutines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Use
aio_bh_new() instead of qemu_bh_new().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The docs for glfs_init suggest that the function sets errno on every
failure. In fact it doesn't. As other functions such as
qemu_gluster_open() in the gluster block code report their errors based
on this fact we need to make sure that errno is set on each failure.
This fixes a crash of qemu-img/qemu when a gluster brick isn't
accessible from given host while the server serving the volume
description is.
Thread 1 (Thread 0x7ffff7fba740 (LWP 203880)):
#0 0x00007ffff77673f8 in glfs_lseek () from /usr/lib64/libgfapi.so.0
#1 0x0000555555574a68 in qemu_gluster_getlength ()
#2 0x0000555555565742 in refresh_total_sectors ()
#3 0x000055555556914f in bdrv_open_common ()
#4 0x000055555556e8e8 in bdrv_open ()
#5 0x000055555556f02f in bdrv_open_image ()
#6 0x000055555556e5f6 in bdrv_open ()
#7 0x00005555555c5775 in bdrv_new_open ()
#8 0x00005555555c5b91 in img_info ()
#9 0x00007ffff62c9c05 in __libc_start_main () from /lib64/libc.so.6
#10 0x00005555555648ad in _start ()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the definitions of GLUSTER_FD_WRITE and GLUSTER_FD_READ which are
no longer used. Also sockets.h isn't needed any more.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pipe handling mechanism in gluster driver was based on similar implementation
in RBD driver and hence had GPLv2 and associated copyright information.
After changing gluster driver to coroutine based implementation, the pipe
handling code no longer exists and hence change gluster driver's licence to
GPLv2+ and remove RBD copyrights.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit adccfbcd60 (block: gluster - add
reopen support.) did not supply the qemu_gluster_init() Error **
argument, needed since commit a7451cb850
(gluster: correctly propagate errors).
Pass through qemu_gluster_reopen_prepare()'s errp, as done in
qemu_gluster_open().
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gluster does parse open flags in its .bdrv_open() implementation,
and the .bdrv_reopen_* implementations need to do the same.
A new gluster connection to the image file to be created is established
in the .bdrv_reopen_prepare(), and the image file opened with the new
flags.
If this is successful, then the old image file is closed, and the
old connection torn down. The relevant structure pointers in the gluster
state structure are updated to the new connection.
If it is not successful, then the new file handle and connection is
abandoned (if it exists), while the old connection is not modified at
all.
With reopen supported, block-commit (and offline commit) is now also
supported for image files whose base image uses the native gluster
protocol driver.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for supporting reopen on gluster, move flag
parsing out to a function. Also, add a NULL check in the
gconf cleanup.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, "gluster:///volname/img" and (using file. options)
"file.driver=gluster,file.filename=foo" will segfault. Also,
"//host/volname/img" will be rejected, but it is a valid URL
that should be accepted just fine with "file.driver=gluster".
Accept all of these, by inferring missing transport and host
as TCP and localhost respectively.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
GlusterFS supports creation of zero-filled file on GlusterFS volume
by means of an API called glfs_zerofill(). Use this API from QEMU to
create an image that is filled with zeroes by using the preallocation
option of qemu-img.
qemu-img create gluster://server/volume/image -o preallocation=full 10G
The allowed values for preallocation are 'full' and 'off'. By default
preallocation is off and image is not zero-filled.
glfs_zerofill() offloads the writing of zeroes to the server and if
the storage supports SCSI WRITESAME, GlusterFS server can issue
BLKZEROOUT ioctl to achieve the zeroing.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert the read, write, flush and discard implementations from aio-based
ones to coroutine based ones.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quorum driver.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently if gluster AIO callback thread fails to notify the QEMU thread about
AIO completion, we try graceful recovery by marking the disk drive as
inaccessible. This error recovery code is race-prone as found by Asias and
Stefan. However as found out by Paolo, this kind of error is impossible and
hence simplify the code that handles this error recovery.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since .io_flush() is no longer called we do not need
qemu_gluster_aio_flush_cb() anymore. It turns out that qemu_aio_count
is unused now and can be dropped.
Thanks to Bharata B Rao <bharata@linux.vnet.ibm.com> for catching a
build failure with CONFIG_GLUSTERFS_DISCARD, which has been fixed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_truncate in GlusterFS block driver so that GlusterFS backend
can support image resizing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement bdrv_aio_discard for gluster.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
GlusterFS volumes can be backed by block devices, in which case
bdrv_create() doesn't make sure that the image is zeroed out. It is
currently not possibly to detect whether a given image is backed by a
file or a block device, and incorrectly assuming that it is zeroed
corrupts images during qemu-img convert, so let's err on the side of
caution and always return 0.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is only to convert the internal interface that is used for passing
the "filename" to be parsed, but converting to actual fine grained
options is left for another day, as it doesn't look trivial.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds gluster as the new block backend in QEMU. This gives
QEMU the ability to boot VM images from gluster volumes. Its already
possible to boot from VM images on gluster volumes using FUSE mount, but
this patchset provides the ability to boot VM images from gluster volumes
by by-passing the FUSE layer in gluster. This is made possible by
using libgfapi routines to perform IO on gluster volumes directly.
VM Image on gluster volume is specified like this:
file=gluster[+transport]://[server[:port]]/volname/image[?socket=...]
'gluster' is the protocol.
'transport' specifies the transport type used to connect to gluster
management daemon (glusterd). Valid transport types are
tcp, unix and rdma. If a transport type isn't specified, then tcp
type is assumed.
'server' specifies the server where the volume file specification for
the given volume resides. This can be either hostname, ipv4 address
or ipv6 address. ipv6 address needs to be within square brackets [ ].
If transport type is 'unix', then 'server' field should not be specifed.
The 'socket' field needs to be populated with the path to unix domain
socket.
'port' is the port number on which glusterd is listening. This is optional
and if not specified, QEMU will send 0 which will make gluster to use the
default port. If the transport type is unix, then 'port' should not be
specified.
'volname' is the name of the gluster volume which contains the VM image.
'image' is the path to the actual VM image that resides on gluster volume.
Examples:
file=gluster://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4/testvol/a.img
file=gluster+tcp://1.2.3.4:24007/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]/testvol/dir/a.img
file=gluster+tcp://[1:2:3:4:5:6:7:8]:24007/testvol/dir/a.img
file=gluster+tcp://server.domain.com:24007/testvol/dir/a.img
file=gluster+unix:///testvol/dir/a.img?socket=/tmp/glusterd.socket
file=gluster+rdma://1.2.3.4:24007/testvol/a.img
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
