'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210418233448.1267991-4-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'extends' is an alternative to using YAML anchors
and is a little more flexible and readable. See:
https://docs.gitlab.com/ee/ci/yaml/#extends
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210418233448.1267991-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
There are no known users of this CPU anymore, and there are no
binaries available online which could be used for regression tests,
so the code has likely completely bit-rotten already. It's been
marked as deprecated since two releases now and nobody spoke up
that there is still a need to keep it, thus let's remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210430160355.698194-1-thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Commit message typos fixed, trivial conflicts resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If we use the system Meson but it is too old, the subsequent "meson configure"
will fail. Always use the submodule when building with CFI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are using the dtrace backend in downstream RHEL, so testing this
in the CentOS 8 task seems to be a good fit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210331160351.3071279-1-thuth@redhat.com>
Message-Id: <20210401102530.12030-12-alex.bennee@linaro.org>
Commit 7d7dbf9dc1 introduced a new line starting with
"GIT_SUBMODULES_ACTION=" in the config-host.mak file. The grep that
tries to determine the submodules in the gitlab-ci.yml file matches
this new line, too, causing a warning message when updating the modules:
warn: ignoring non-existent submodule GIT_SUBMODULES_ACTION=update
Fix it by matching the "GIT_SUBMODULES=..." line only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210331073316.2965928-1-thuth@redhat.com>
Message-Id: <20210401102530.12030-11-alex.bennee@linaro.org>
In d0f26e68a0 ("gitlab: force enable docs build in Fedora, Ubuntu,
Debian") we made sure we can build the documents on more than one
system. However we don't want to build documents all the time as it's
a waste of cycles (and energy). So lets reduce the total amount of
documentation we build while still keeping coverage of at least one
build on each supported target.
Fixes: a8a3abe0b3 ("gitlab: move docs and tools build across from Travis")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-23-alex.bennee@linaro.org>
These builds are running very close to the default build limit and as
they are already pared down the only other option is to extend the
timeout a little to give some breathing room.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210323165308.15244-16-alex.bennee@linaro.org>
Our gitlab-ci got quite slow in the past weeks, due to the immense amount
of jobs that we have, so we should try to reduce the number of jobs.
There is no real good reason for having separate jobs just to test the
trace backends, we can do this just fine in other jobs, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210319095726.45965-1-thuth@redhat.com>
Message-Id: <20210323165308.15244-11-alex.bennee@linaro.org>
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
-----BEGIN PGP SIGNATURE-----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=YxBC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-12' into staging
* Move unit and bench tests into separate directories
* Clean-up and improve gitlab-ci jobs
* Drop the non-working "check-speed" makefile target
* Minor documentation updates
# gpg: Signature made Fri 12 Mar 2021 17:18:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-03-12:
README: Add Documentation blurb
MAINTAINERS: Merge the Gitlab-CI section into the generic CI section
tests: remove "make check-speed" in favor of "make bench"
gitlab-ci.yml: Merge check-crypto-old jobs into the build-crypto-old jobs
gitlab-ci.yml: Merge one of the coroutine jobs with the tcg-disabled job
gitlab-ci.yml: Add some missing dependencies to the jobs
gitlab-ci.yml: Move build-tools-and-docs-debian to a better place
tests: Move benchmarks into a separate folder
tests: Move unit tests into a separate directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both, the build-crypto-old and the check-crypto-old jobs finish reasonably
fast, and the build artifacts are only used for the single corresponding
check jobs, so there is no reason for doing the check step in a separate
job here. Thus let's stop wasting artifacts space and job scheduler over-
head by simply merging the test step into the build jobs.
Message-Id: <20210311142211.1547864-5-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Our gitlab-ci got quite slow in the past weeks, due to the immense amount
of jobs that we have, so we should try to reduce the number of jobs.
Since we already have a job that builds without TCG, we can merge
one of the "build-coroutine" jobs with it to get rid of at least one
job.
Message-Id: <20210311142211.1547864-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make sure that all jobs have proper "needs:" statements so that
they can start as soon as possible, without having to wait for the
previous pipeline stage to finish.
Message-Id: <20210311142211.1547864-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "build-tools-and-docs-debian" job had been added in between
the "check-system-debian" and the "accepance-system-debian" jobs
and thus separates the jobs that belong together. Move it away,
to the end of the file, next to the "pages" job that depends on it.
And while we're at it, also add a proper "needs:" line to the
job so that it can be started as soon as possible instead of always
waiting for the previous stage to finish.
Message-Id: <20210311142211.1547864-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has had options to enable control-flow integrity features
for a few months now. Add two sets of build/check/acceptance
jobs to ensure the binary produced is working fine.
The three sets allow testing of x86_64 binaries for x86_64, s390x,
ppc64 and aarch64 targets
[AJB: tweak job names to avoid brands]
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210304030948.9367-3-dbuono@linux.vnet.ibm.com>
Message-Id: <20210305092328.31792-9-alex.bennee@linaro.org>
Define a new variable LD_JOBS, that can be used to select
the maximum number of linking jobs to be executed in parallel.
If the variable is not defined, maintain the default given by
make -j
Currently, make parallelism at build time is based on the number
of cpus available.
This doesn't work well with LTO at linking, because with LTO the
linker has to load in memory all the intermediate object files
for optimization.
The end result is that, if the gitlab runner happens to run two
linking processes at the same time, the job will fail with an
out-of-memory error,
This patch leverages the ability to maintain high parallelism at
compile time, but limit the number of linkers executed in parallel.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210304030948.9367-2-dbuono@linux.vnet.ibm.com>
Message-Id: <20210305092328.31792-8-alex.bennee@linaro.org>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's now possible to also run the non-x86 TCG tests with TCI.
Message-Id: <20210127055903.40148-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 299e6f19b3 ("vhost-net: revamp configure logic") added
the --enable-vhost-kernel option.
Disable it in the build-disable job.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210131104621.221602-1-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit ba2232bae6 ("gitlab-ci: Refactor code that show logs
of failed acceptances") we display the log content of failing tests
(Avocado "FAIL" event).
Since we are also interested in tests timeouting, update our global
Avocado config to display log content for the "INTERRUPT" event,
"possible when the timeout is reached" (See [*]).
[*] https://avocado-framework.readthedocs.io/en/latest/guides/writer/chapters/writing.html#test-statuses
Suggested-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210215171438.935665-1-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The standard is to use 2 space indent, not 3.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216132954.295906-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows the build jobs to start running as soon as their respective
container image is ready, instead of waiting for all container builds
to finish.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216132954.295906-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use clang-10, so we can also use the --enable-tsan configure
option instead of only passing the flag via --extra-cflags.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-6-thuth@redhat.com>
Message-Id: <20210211122750.22645-6-alex.bennee@linaro.org>
We already have similar jobs in the gitlab-CI ("build-some-softmmu" and
"build-user-plugins"), so let's switch one of them to use --enable-debug
instead of --enable-debug-tcg, then we can simply drop these jobs from
the Travis-CI.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210211045455.456371-5-thuth@redhat.com>
Message-Id: <20210211122750.22645-5-alex.bennee@linaro.org>
Simply add the flag to an existing job, no need for yet another
job here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-4-thuth@redhat.com>
Message-Id: <20210211122750.22645-4-alex.bennee@linaro.org>
Add it to the existing Clang job and also add a job that covers the
linux-user code with this compiler flag. To make sure that the detected
problems are not simply ignored, let's also use "-fno-sanitize-recover=..."
now instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-3-thuth@redhat.com>
Message-Id: <20210211122750.22645-3-alex.bennee@linaro.org>
Similarly to commit 8cdb2cef3f, move the gprof/gcov test to GitLab.
The coverage-summary.sh script is not Travis-CI specific, make it
generic.
[thuth: Add gcovr and bsdmainutils which are required for the
coverage-summary.sh script to the ubuntu docker file,
and use 'check' as test target]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201108204535.2319870-10-philmd@redhat.com>
Message-Id: <20210211045455.456371-2-thuth@redhat.com>
Message-Id: <20210211122750.22645-2-alex.bennee@linaro.org>
It is no longer necessary to point .gitmodules at GitLab repos when
running in GitLab CI since they are now used all the time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, our check-system-* jobs are recompiling the whole sources
again. This happens due to the fact that the jobs are checking out
the whole source tree and required submodules again, and only try
to use the "build" directory with the binaries and object files as an
artifact from the previous stage - which simply does not work right
anymore (with the current version of meson). Due to some changed
time stamps, meson/ninja are always trying to rebuild the whole tree.
In the long run, we could likely use "meson test --no-rebuild", but
there is still some work going on in that area to improve the user
experience. So until this has been done, simply avoid recompiling the
sources with a trick: pass NINJA=":" to the make process in the test
jobs. Also check out the submodules manually before updating the
timestamps in the build folder, so that the binaries are definitely
newer that all the source files.
This saves ca. 10 - 15 minutes of precious CI cycles in each run.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210126065757.403853-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The build-without-default-features job is running quite long and sometimes
already hits the 1h time limit. Exclude some targets which do not provide
additional test coverage here (since we e.g. also already test other targets
of the same type, just with different endianess, or a 64-bit superset) to
avoid that we hit the timeout here so easily.
Message-Id: <20210126172345.15947-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the meson build system rework, the configure script prefers the
git submodules over the system libraries. So we are testing compilation
with capstone, fdt and libslirp as a submodule all over the place,
burning CPU cycles by recompiling these third party modules and wasting
some network bandwidth in the CI by cloning the submodules each time.
Let's stop doing that in at least a couple of jobs and use the system
libraries instead.
While we're at it, also install meson in the Fedora container, since
it is new enough already, so we do not need to check out the meson
submodule here.
Message-Id: <20210121174451.658924-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a configuration tested by Peter Maydell (see [1] and [2])
but not covered in our CI [3]:
[705/2910] Compiling C object libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
FAILED: libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
../linux-user/strace.c: In function 'do_print_sockopt':
../linux-user/strace.c:2831:14: error: 'IPV6_ADDR_PREFERENCES' undeclared (first use in this function)
case IPV6_ADDR_PREFERENCES:
^
This job currently takes 31 minutes 32 seconds ([4]).
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05086.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05379.html
[3] https://gitlab.com/philmd/qemu/-/jobs/977408284
[4] https://gitlab.com/philmd/qemu/-/jobs/978223286
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210121172829.1643620-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately. The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users. However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
* Cross-references between documents become much harder or
possibly impossible
* There is no single index to the whole documentation
* Within one manual there's no links or table-of-contents info
that lets you easily navigate to the others
* The devel manual doesn't get published on the QEMU website
(it would be nice to able to refer to it there)
Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs. Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing. The previous manual
divisions remain as the new top level sections in the manual.
* The per-manual conf.py files are no longer needed
* The man_pages[] specifications previously in each per-manual
conf.py move to the top level conf.py
* docs/meson.build logic is simplified as we now only need to run
Sphinx once for the HTML and then once for the manpages5B
* The old index.html.in that produced the top-level page with
links to each manual is no longer needed
Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc. The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
These tests are good at shaking out missing stubs which otherwise work
if we have built targets. Rather than create a new job just add the
checks to the existing tools-and-docs build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-12-alex.bennee@linaro.org>
While we are at it we might as well check the tag generation. For
bonus points we run GNU globals htags into the public pages directory
for publishing with the auto generated pages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210114165730.31607-10-alex.bennee@linaro.org>
Add build-system-opensuse jobs and opensuse-leap.docker dockerfile.
Use openSUSE Leap 15.2 container image in the gitlab-CI.
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201229085046.8536-1-acho@suse.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210190417.31673-8-alex.bennee@linaro.org>
Keep the logs of acceptance tests for two days on GitLab. If you want
to make it available for more time, click on the 'Keep' button on
the Job page at web UI.
By default GitLab will archive artifacts only if the job succeed.
Instead let's keep it on both success and failure, so it gives the
opportunity to the developer/maintainer to check the error logs
as well as to the logs of CANCEL tests (not shown on the job logs).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201211183827.915232-4-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the code (python) on after_script of the acceptance jobs that
is currently used to show the logs of failed tests. Instead it is used
the Avocado's testlogs plug-in which works likewise.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201211183827.915232-3-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit 8cdb2cef3f, move the coroutine tests to GitLab.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-13-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced Travis by Gitlab-CI in comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Similarly to commit 8cdb2cef3f, move the user-static test to GitLab.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-11-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
