The ledstate should be compared before modifiers updated,
otherwise the ledstate would be the same as current_led_state.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1368606040-11950-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added TLS support to the VNC QEMU Websockets implementation.
VNC-TLS needs to be enabled for this feature to be used.
The required certificates are specified as in case of VNC-TLS
with the VNC parameter "x509=<path>".
If the server certificate isn't signed by a rooth authority it needs to
be manually imported in the browser because at least in case of Firefox
and Chrome there is no user dialog, the connection just gets canceled.
As a side note VEncrypt over Websocket doesn't work atm because TLS can't
be stacked in the current implementation. (It also didn't work before)
Nevertheless to my knowledge there is no HTML 5 VNC client which supports
it and the Websocket connection can be encrypted with regular TLS now so
it should be fine for most use cases.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make gui update rate adaption code in gui_update() actually work.
Sprinkle in a tracepoint so you can see the code at work. Remove
the update rate adaption code in vnc and make vnc simply use the
generic bits instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch). Passing NULL is allowed and updates the active console, like
the functions do today.
While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in the (single) DisplayState
struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn.
With DisplayChangeListenerOps having a more sane interface now we can
simply use the DisplayChangeListener pointer to get access to our
private data instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some VncState values are not initialized before the Websocket handshake.
If it fails QEMU segfaults during the cleanup. To prevent this behavior
intialization checks are added.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Following Anthony Liguori's Websocket implementation I have added the
buffer_advance function to VNC and replaced all related buffer memmove
operations with it.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds an x argument to qemu_pixman_linebuf_fill so it can
also be used to convert a partial scanline. Then fix tight + png/jpeg
encoding by passing in the x+y offset, so the data is read from the
correct screen location instead of the upper left corner.
Cc: 1087974@bugs.launchpad.net
Cc: qemu-stable@nongnu.org
Reported-by: Tim Hardeneck <thardeck@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
pc: Drop redundant test for ROM memory region
exec: make some functions static
target-ppc: make some functions static
ppc: add missing static
vnc: add missing static
vl.c: add missing static
target-sparc: make do_unaligned_access static
m68k: Return semihosting errno values correctly
cadence_uart: More debug information
Conflicts:
target-m68k/m68k-semi.c
Switching the vnc server framebuffer to use 32bpp unconditionally
turns the code bits which handle 8 and 16 bpp into dead code.
Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc code uses *three* DisplaySurfaces:
First is the surface of the actual QemuConsole, usually the guest
screen, but could also be a text console (monitor/serial reachable via
Ctrl-Alt-<nr> keys). This is left as-is.
Second is the current server's view of the screen content. The vnc code
uses this to figure which parts of the guest screen did _really_ change
to reduce the amount of updates sent to the vnc clients. It is also
used as data source when sending out the updates to the clients. This
surface gets replaced by a pixman image. The format changes too,
instead of using the guest screen format we'll use fixed 32bit rgb
framebuffer and convert the pixels on the fly when comparing and
updating the server framebuffer.
Third surface carries the format expected by the vnc client. That isn't
used to store image data. This surface is switched to PixelFormat and a
boolean for bigendian byte order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stop abusing displaysurface fields for text mode displays.
(bpp = 0, width = cols, height = lines).
Add flags to displaystate indicating whenever text mode display
(curses) or gfx mode displays (sdl, vnc, ...) are present.
Add separate displaychangelistener callbacks for text / gfx mode
resize & updates.
This allows to enable gfx and txt diplays at the same time and also
paves the way for more cleanups in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When adding DisplayChangeListeners the set_mouse and cursor_define
callbacks have been left in DisplayState for some reason. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We now always return "nice" error messages in errp when we goto fail.
Drop the default error message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before:
$ qemu-system-x86_64 -vnc foo.bar:12345
getaddrinfo(foo.bar,18245): Name or service not known
Failed to start VNC server on `foo.bar:12345'
$ qemu-system-x86_64 -vnc localhost:12345,reverse=on
inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
Failed to start VNC server on `localhost:12345,reverse=on'
After:
$ x86_64-softmmu/qemu-system-x86_64 -vnc foo.bar:12345
Failed to start VNC server on `foo.bar:12345': address resolution failed for foo.bar:18245: Name or service not known
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:12345,reverse=on
Failed to start VNC server on `localhost:12345,reverse=on': Failed to connect to socket: Connection refused
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets me adjust the clients to do proper error propagation first,
thus avoiding temporary regressions in the quality of the error messages.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.
Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.
Signed-off-by: Joel Martin <github@martintribe.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When reverse connection is in use, there is no active VNC server
socket. Because of this, getsockopt(-1, ...) is attempted and
the following error is emitted:
$ socat TCP-LISTEN:5900,reuseaddr TCP-LISTEN:5901,reuseaddr &
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
An undefined error has occurred
Because however the host, family, service and auth fields are
optional, we can just exit if there is no active server socket.
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
Server:
Client:
address: 127.0.0.1:5900
x509_dname: none
username: none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No need to add non blocking parameters to the blocking inet_connect
add block parameter for inet_connect_opts instead of using QemuOpt "block".
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's used to indicate the special case where a valid file-descriptor
is returned (ie. success) but the connection can't be completed
w/o blocking.
This is needed because QERR_SOCKET_CONNECT_IN_PROGRESS is not
treated like an error and a future commit will drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU now has a fundamental requirement for pthreads, so there
is no compelling reason to retain support for the non-threaded
VNC server. Remove the --{enable,disable}-vnc-thread configure
arguments, and all CONFIG_VNC_THREAD conditionals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
NULL pointer dereference in case no vnc server is configured.
Catch this and return -EINVAL like vnc_display_password() does.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new argument in inet_listen()/inet_listen_opts()
to pass back listen error.
Change nbd, qemu-char, vnc to use new interface.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a bool argument to inet_connect() to assign if set socket
to block/nonblock, and delete original argument 'socktype'
that is unused.
Add a new argument to inet_connect()/inet_connect_opts(),
to pass back connect error by error class.
Retry to connect when -EINTR is got. Connect's successful
for nonblock socket when following errors are got, user
should wait for connecting by select():
-EINPROGRESS
-EWOULDBLOCK (win32)
-WSAEALREADY (win32)
Change nbd, vnc to use new interface.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes memory reads and writes which exceeded the upper limit
of allocated memory vd->guest.ds->data and vd->server->data.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The threaded VNC servers messed up with QEMU fd handlers without
any kind of locking, and that can cause some nasty race conditions.
Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(),
which will wait for the current job queue to finish, can be called with
the iothread lock held.
Instead, we now store the data in a temporary buffer, and use a bottom
half to notify the main thread that new data is available.
vnc_[un]lock_ouput() is still needed to access VncState members like
abort, csock or jobs_buffer.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The comment is wrong, we have to do something in the setdata callback.
Changing the framebuffer backing storage (happens when the guest pans
the display) renders the whole screen content invalid.
Trigger #1: cirrus vga + 32bit linux guest + vesafb with ypan enabled.
Trigger #2: std vga + http://patchwork.ozlabs.org/patch/145479/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently when disabling login in VNC, the password is cleared out and the
authentication protocol is forced to AUTH_VNC. If you're using a stronger
authentication protocol, this has the effect of downgrading your security
protocol.
Fix this by only changing the authentication protocol if the current
authentication protocol is AUTH_NONE. That ensures we're never downgrading.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
--
NB. This patch is derived from one posted by Anthony last year, which got
accidentally lost after Luiz took over the QMP series work
https://lists.gnu.org/archive/html/qemu-devel/2011-09/msg00392.html
v1 -> v2
- Make sure to not demote when changing password (Daniel)
v2 -> v3
- Rebase to latest GIT master wrt QMP changes
For any modifier key (shift, ctrl, alt) still pressed on disconnect
inject a key-up event into the guest. The vnc client is gone, it will
not do that, so qemu has to do it instead.
Without this keys will get stuck, making the guest act in weird ways
after reconnecting. Reproducer: exit vnc client via Alt-F4, guest
continues to see the pressed alt key and will not react to key events
in any useful way until you tap the alt key once to unstuck it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
