This patch adds --{enable,disable}-debug-info switches to configure
which allows to include/exclude the '-g' switch on the gcc & ld
command lines. Not building debug info reduces ressource usage
(especially disk) alot and is quite useful for test builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code in console.c verifies whenever a screen_dump function
pointer is present before calling it, so there is no need to supply an
dummy function. Remove them. Also report an error to notify the user
that he didn't got a screenshot.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The displaychangelistener isn't needed at all, we can simply save the
image when vga_hw_update is done instead of hooking into the update
process.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Send qmp events on suspend and wakeup so libvirt
has a chance to track the vm state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the acpi timer wake up the guest.
Guests can enable/disable this via acpi too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the rtc wake up the guest when the alarm fires.
Add acpi windup to property support RTC_EN, so guests
can enable and disable this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a 'wakeup' property to the serial port. It is off by default. When
enabled any incoming character on the serial line will wake up the
guest. Useful for guests which have a serial console configured.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds wakeup support to ps/2 emulation. Any key press on the
ps/2 keyboard will wakeup the guest. Likewise any mouse button press
will wakeup the guest. Mouse moves are ignored, so the guest will not
wakeup in case your mouse crosses the vnc window of a suspended guest by
accident.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch switches pc s3 suspend over to the new infrastructure.
The cmos_s3 qemu_irq is killed, the new notifier is used instead.
The xen hack goes away with that too, the hypercall can simply be
done in a notifier function now.
This patch also makes the guest actually stay suspended instead
of leaving suspend instantly, so it is useful for more than just
testing whenever the suspend/resume cycle actually works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some infrastructure to handle suspend and resume to
qemu. First there are two functions to switch state and second there
is a suspend notifier:
* qemu_system_suspend_request is supposed to be called when the
guest asks for being be suspended, for example via ACPI.
* qemu_system_wakeup_request is supposed to be called on events
which should wake up the guest.
* qemu_register_suspend_notifier can be used to register a notifier
which will be called when the guest is suspended. Machine types
and device models can hook in there to modify state if needed.
* qemu_register_wakeup_notifier can be used to register a notifier
which will be called when the guest is woken up. Machine types
and device models can hook in there to modify state if needed.
* qemu_system_wakeup_enable can be used to enable/disable wakeup
events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do APCIREGS->pm1.evt.en updates using the new acpi_pm1_evt_write_en
function, so the acpi code will see those updates.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pretty pointless, can easily be reached via ACPIREGS now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All those acpi structs are not independent from each other.
Various acpi functions expecting multiple acpi structs passed
in are a clean indicator for that ;)
So this patch bundles all acpi structs in the new ACPIREGS
struct, then use it everythere pass around acpi state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Group all structs at the top of hw/acpi.h.
Just moving around lines, no code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mdroth/qga-win32-pull-2-23-12:
qemu-ga: add win32 guest-shutdown command
qemu-ga: add Windows service integration
qemu-ga: add initial win32 support
qemu-ga: fixes for win32 build of qemu-ga
qemu-ga: rename guest-agent-commands.c -> commands-posix.c
qemu-ga: separate out common commands from posix-specific ones
qemu-ga: move channel/transport functionality into wrapper class
qemu-ga: Add schema documentation for types
* qmp/queue/qmp:
qmp: add DEVICE_TRAY_MOVED event
ide: drop ide_tray_state_post_load()
block: Don't call bdrv_eject() if the tray state didn't change
block: bdrv_eject(): Make eject_flag a real bool
block: Rename bdrv_mon_event() & BlockMonEventAction
* kwolf/for-anthony: (46 commits)
qemu-iotests: common.config: Allow use of arbitrary qemu* paths
qemu-iotests: check: print relevant path information
qemu-iotests: test loading internal snapshots
qemu-iotests: Update filter for default cluster size
qemu-iotests: add qed support to 025 image resize test
qemu-iotests: Update rbd support
qemu-iotests: common.config: Fix no $TEST_DIR directory
qemu-iotests: only run 016 for file and sheepdog protocols
qemu-iotests: Use zero-based offsets for IO patterns
qemu-iotests: add support for rbd and sheepdog protocols
qemu-iotests: filter IMGFMT correctly in 019
qemu-iotests: README: Fix spelling
qemu-iotests: add support for qed format
qemu-iotests: filter TEST_DIR correctly in 019
qemu-iotests: fix 019 golden output
qemu-iotests: update expected results after qemu-img changes
qemu-iotests: add read/write from smaller backing image test
qemu-iotests: add sub-cluster allocating write test for sparse image formats
qemu-iotests: improve test for qemu-img convert with backing file
qemu-iotests: consider more cases in parsing qemu-io output
...
Move the logic to transform the 48-char model ID into the 12-word model
value into a helper.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the stepping field into a helper function.
To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous stepping values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the model and extended model fields
into a helper function.
To make the function self-contained and to prepare for future
unordered/multiple uses, mask out any previous model values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the logic for setting the family and extended family into a
helper function.
To make the helper self-contained and in preparation of future
unordered/multiple uses, mask out any previous family values first.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I'm trying to improve this code's error reporting, and the debug code
is getting in my way: it clutters the code, it clobbers errno in
inconvenient places, and it uses the same fprintf() both for error
reporting and debug output in a few places.
Get rid of it. Once decent error reporting is in place, adding back
whatever debug code we need shouldn't be hard.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stash away the option argument with add_device_config(), so we still
have its location when we get around to parsing it.
This doesn't improve any messages I can see just yet, but that'll
change shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are -bt, -serial, -virtcon, -parallel, -debugcon, -usbdevice.
Improves messages emitted via proper error reporting interfaces. For
instance:
$ qemu-system-x86_64 -nodefaults -S -usb -usbdevice net:vlan=xxx
qemu-system-x86_64: Parameter 'vlan' expects a number
becomes:
qemu-system-x86_64: -usbdevice net:vlan=xxx: Parameter 'vlan' expects a number
Many more remain unimproved, because they're fprintf()ed. The next
few commits will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cleaned up silently in commit aad04cd0, but that just got reverted.
Re-apply this part.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixed silently in commit aad04cd0, but that just got reverted.
Re-apply the fixes, plus one missed instance: parport on Linux.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The commit's purpose is laudable:
The only way for chardev drivers to communicate an error was to
return a NULL pointer, which resulted in an error message that
said _that_ something went wrong, but not _why_.
It attempts to achieve it by changing the interface to return 0/-errno
and update qemu_chr_open_opts() to use strerror() to display a more
helpful error message. Unfortunately, it has serious flaws:
1. Backends "socket" and "udp" return bogus error codes, because
qemu_chr_open_socket() and qemu_chr_open_udp() assume that
unix_listen_opts(), unix_connect_opts(), inet_listen_opts(),
inet_connect_opts() and inet_dgram_opts() fail with errno set
appropriately. That assumption is wrong, and the commit turns
unspecific error messages into misleading error messages. For
instance:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: No such file or directory
ENOENT is what happens to be in my errno when the backend returns
-errno. Let's put ERANGE there just for giggles:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx -drive if=none,iops=99999999999999999999
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: Numerical result out of range
Worse: when errno happens to be zero, return -errno erroneously
signals success, and qemu_chr_new_from_opts() dies dereferencing
uninitialized chr. I observe this with "-serial unix:".
2. All qemu_chr_open_opts() knows about the error is an errno error
code. That's simply not enough for a decent message. For instance,
when inet_dgram() can't resolve the parameter host, which errno code
should it use? What if it can't resolve parameter localaddr?
Clue: many backends already report errors in their open methods.
Let's revert the flawed commit along with its dependencies, and fix up
the silent error paths instead.
This reverts commit 6e1db57b2a.
Conflicts:
console.c
hw/baum.c
qemu-char.c
This reverts commit aad04cd024.
The parts of commit db418a0a "Add stdio char device on windows" that
depend on the reverted change fixed up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The conditions for detecting no free target or LUN were wrong.
The LUN loop was followed by an "if" condition that is never
true, because the loop is exited as soon as lun becomes equal
to bus->info->max_lun, and never becomes greater than it.
The target loop had a wrong condition (<= instead of <). Once
this is fixed, the loop would fail in the same way as the LUN
loop.
The fix is to see whether scsi_device_find returned the device with the
last (channel, target, LUN) pair, and fail if so.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By removing memset altogether (Patch from Stefan Hajnoczi, tested
compile only by me).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Implement guest-shutdown RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Original patch by Gal Hammer <ghammer@redhat.com>
This allows qemu-ga to function as a Windows service:
- to install the service (will auto-start on boot):
qemu-ga --service install
- to start the service:
net start qemu-ga
- to stop the service:
net stop qemu-ga
- to uninstall service:
qemu-ga --service uninstall
Original patch by Gal Hammer <ghammer@redhat.com>
This adds a win32 channel implementation that makes qemu-ga functional
on Windows using virtio-serial (unix-listen/isa-serial not currently
implemented). Unlike with the posix implementation, we do not use
GIOChannel for the following reasons:
- glib calls stat() on an fd to check whether S_IFCHR is set, which is
the case for virtio-serial on win32. Because of that, a one-time
check to determine whether the channel is readable is done by making
a call to PeekConsoleInput(), which reports the underlying handle is
not a valid console handle, and thus we can never read from the
channel.
- if one goes as far as to "trick" glib into thinking it is a normal
file descripter, the buffering is done in such a way that data
written to the output stream will subsequently result in that same
data being read back as if it were input, causing an error loop.
furthermore, a forced flush of the channel only moves the data into a
secondary buffer managed by glib, so there's no way to prevent output
from getting read back as input.
The implementation here ties into the glib main loop by implementing a
custom GSource that continually submits asynchronous/overlapped I/O to
fill an GAChannel-managed read buffer, and tells glib to poll the
corresponding event handle for a completion whenever there is no
data/RPC in the read buffer to notify the main application about.
Various stubs and #ifdefs to compile for Windows using mingw
cross-build. Still has 1 linker error due to a dependency on the
forthcoming win32 versions of the GAChannel/transport class.
Many of the current RPC implementations are very much POSIX-specific
and require complete re-writes for Windows. There are however a small
set of core guest agent commands that are common to both, and other
commands such as guest-file-* which *may* be portable. So we introduce
commands.c for the latter, and will rename guest-agent-commands.c to
commands-posix.c in a future commit. Windows implementations will go in
commands-win32.c, eventually.
This is mostly in preparation for the win32 port, which won't use
GIO channels for reasons that will be made clearer later. Here the
GAChannel class is just a loose wrapper around GIOChannel
calls/callbacks, but we also roll in the logic/configuration for
various channel types and managing unix socket connections, which makes
the abstraction much more complete and further aids in the win32 port
since isa-serial/unix-listen will not be supported initially.
There's also a bit of refactoring in the main logic to consolidate the
exit paths so we can do common cleanup for things like pid files, which
weren't always cleaned up previously.
