This parameter is to be used in the processor_id entry in the type 4
table.
This parameter is set as optional and if left will use the values from
the CPU model.
This enables hiding the host information from the guest and allowing AMD
VMs to run pretending to be Intel for some userspace software concerns.
Reviewed-by: Peter Foley <pefoley@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220125163118.1011809-1-venture@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu-options.hx contains grammar that a native English-speaking
person would never use.
Replace "This option defines where is connected the drive" by
"This option defines where the drive is connected".
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/853
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220202143422.912070-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ARM64 machines like Kunpeng Family Server Chips have a level
of hardware topology in which a group of CPU cores share L3
cache tag or L2 cache. For example, Kunpeng 920 typically
has 6 or 8 clusters in each NUMA node (also represent range
of CPU die), and each cluster has 4 CPU cores. All clusters
share L3 cache data, but CPU cores in each cluster share a
local L3 tag.
Running a guest kernel with Cluster-Aware Scheduling on the
Hosts which have physical clusters, if we can design a vCPU
topology with cluster level for guest kernel and then have
a dedicated vCPU pinning, the guest will gain scheduling
performance improvement from cache affinity of CPU cluster.
So let's enable the support for this new parameter on ARM
virt machines. After this patch, we can define a 4-level
CPU hierarchy like: cpus=*,maxcpus=*,sockets=*,clusters=*,
cores=*,threads=*.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-2-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This option was just a wrapper around the -display ...,window-close=off
parameter, and the name "no-quit" is rather confusing compared to
"window-close" (since there are still other means to quit the emulator),
so let's remove this now.
Message-Id: <20211215082417.180735-1-thuth@redhat.com>
Acked-by: Michal Prívozník <mprivozn@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The new Cluster-Aware Scheduling support has landed in Linux 5.16,
which has been proved to benefit the scheduling performance (e.g.
load balance and wake_affine strategy) on both x86_64 and AArch64.
So now in Linux 5.16 we have four-level arch-neutral CPU topology
definition like below and a new scheduler level for clusters.
struct cpu_topology {
int thread_id;
int core_id;
int cluster_id;
int package_id;
int llc_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
cpumask_t cluster_sibling;
cpumask_t llc_sibling;
}
A cluster generally means a group of CPU cores which share L2 cache
or other mid-level resources, and it is the shared resources that
is used to improve scheduler's behavior. From the point of view of
the size range, it's between CPU die and CPU core. For example, on
some ARM64 Kunpeng servers, we have 6 clusters in each NUMA node,
and 4 CPU cores in each cluster. The 4 CPU cores share a separate
L2 cache and a L3 cache tag, which brings cache affinity advantage.
In virtualization, on the Hosts which have pClusters (physical
clusters), if we can design a vCPU topology with cluster level for
guest kernel and have a dedicated vCPU pinning. A Cluster-Aware
Guest kernel can also make use of the cache affinity of CPU clusters
to gain similar scheduling performance.
This patch adds infrastructure for CPU cluster level topology
configuration and parsing, so that the user can specify cluster
parameter if their machines support it.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211228092221.21068-3-wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Added '(since 7.0)' to @clusters in qapi/machine.json]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We have a description in qemu-options.hx for each CPU topology
parameter to explain what it exactly means, and also an extra
declaration for the target-specific one, e.g. "for PC only"
when describing "dies", and "for PC, it's on one die" when
describing "cores".
Now we are going to introduce one more non-generic parameter
"clusters", it will make the Doc less readable and if we still
continue to use the legacy way to describe it.
So let's at first make two tweaks of the Docs to improve the
readability and also scalability:
1) In the -help text: Delete the extra specific declaration and
describe each topology parameter level by level. Then add a
note to declare that different machines may support different
subsets and the actual meaning of the supported parameters
will vary accordingly.
2) In the rST text: List all the sub-hierarchies currently
supported in QEMU, and correspondingly give an example of
-smp configuration for each of them.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211228092221.21068-2-wangyanan55@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to use direct connections instead of via the bus. Clients
are accepted with QMP add_client.
This allows to provide the D-Bus display without a bus. It also
simplifies the testing setup (some CI have issues to setup a D-Bus bus
in a container).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The "dbus" display backend exports the QEMU consoles and other
UI-related interfaces over D-Bus.
By default, the connection is established on the session bus, but you
can specify a different bus with the "addr" option.
The backend takes the "org.qemu" service name, while still allowing
further instances to queue on the same name (so you can lookup all the
available instances too). It accepts any number of clients at this
point, although this is expected to evolve with options to restrict
clients, or only accept p2p via fd passing.
The interface is intentionally very close to the internal QEMU API,
and can be introspected or interacted with busctl/dfeet etc:
$ ./qemu-system-x86_64 -name MyVM -display dbus
$ busctl --user introspect org.qemu /org/qemu/Display1/Console_0
org.qemu.Display1.Console interface - - -
.RegisterListener method h - -
.SetUIInfo method qqiiuu - -
.DeviceAddress property s "pci/0000/01.0" emits-change
.Head property u 0 emits-change
.Height property u 480 emits-change
.Label property s "VGA" emits-change
.Type property s "Graphic" emits-change
.Width property u 640 emits-change
[...]
See the interfaces XML source file and Sphinx docs for the generated API
documentations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new boolean 'kernel-hashes' option on the sev-guest object.
It will be used to to decide whether to add the hashes of
kernel/initrd/cmdline to SEV guest memory when booting with -kernel.
The default value is 'off'.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The single backtick markup in ReST is the "default role". Currently,
Sphinx's default role is called "content". Sphinx suggests you can use
the "Any" role instead to turn any single-backtick enclosed item into a
cross-reference.
This is useful for things like autodoc for Python docstrings, where it's
often nicer to reference other types with `foo` instead of the more
laborious :py:meth:`foo`. It's also useful in multi-domain cases to
easily reference definitions from other Sphinx domains, such as
referencing C code definitions from outside of kerneldoc comments.
Before we do that, though, we'll need to turn all existing usages of the
"content" role to inline verbatim markup wherever it does not correctly
resolve into a cross-refernece by using double backticks instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211004215238.1523082-2-jsnow@redhat.com>
New option parameters unstable-input and unstable-output set policy
for unstable interfaces just like deprecated-input and
deprecated-output set policy for deprecated interfaces (see commit
6dd75472d5 "qemu-options: New -compat to set policy for deprecated
interfaces"). This is intended for testing users of the management
interfaces. It is experimental.
For now, this covers only syntactic aspects of QMP, i.e. stuff tagged
with feature 'unstable'. We may want to extend it to cover semantic
aspects, or the command line.
Note that there is no good way for management application to detect
presence of these new option parameters: they are not visible output
of query-qmp-schema or query-command-line-options. Tolerable, because
it's meant for testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc comments fixed up]
There is one numa config example in qemu-options.hx currently
using "-smp 2" and assuming that there will be 2 sockets and
2 cpus totally. However now the actual calculation logic of
missing sockets and cores is not immutable and is considered
liable to change. Although we will get maxcpus=2 finally based
on current parser, it's always stable to specify it explicitly.
So "-smp 2,sockets=2,maxcpus=2" will be optimal when we expect
multiple sockets and 2 cpus totally.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210928121134.21064-3-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In qemu-option.hx, there is "-smp [[cpus=]n][,maxcpus=cpus]..." in the
DEF part, and "-smp [[cpus=]n][,maxcpus=maxcpus]..." in the RST part.
Obviously the later is right, let's fix the previous one.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210928121134.21064-2-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.
Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.
In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we directly calculate the omitted cpus based on the given
incomplete collection of parameters. This makes some cmdlines like:
-smp maxcpus=16
-smp sockets=2,maxcpus=16
-smp sockets=2,dies=2,maxcpus=16
-smp sockets=2,cores=4,maxcpus=16
not work. We should probably set the value of cpus to match maxcpus
if it's omitted, which will make above configs start to work.
So the calculation logic of cpus/maxcpus after this patch will be:
When both maxcpus and cpus are omitted, maxcpus will be calculated
from the given parameters and cpus will be set equal to maxcpus.
When only one of maxcpus and cpus is given then the omitted one
will be set to its counterpart's value. Both maxcpus and cpus may
be specified, but maxcpus must be equal to or greater than cpus.
Note: change in this patch won't affect any existing working cmdlines
but allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SMP configuration, we should either provide a topology
parameter with a reasonable value (greater than zero) or just
omit it and QEMU will compute the missing value.
The users shouldn't provide a configuration with any parameter
of it specified as zero (e.g. -smp 8,sockets=0) which could
possibly cause unexpected results in the -smp parsing. So we
deprecate this kind of configurations since 6.2 by adding the
explicit sanity check.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-3-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because SGX EPC is enumerated through CPUID, EPC "devices" need to be
realized prior to realizing the vCPUs themselves, i.e. long before
generic devices are parsed and realized. From a virtualization
perspective, the CPUID aspect also means that EPC sections cannot be
hotplugged without paravirtualizing the guest kernel (hardware does
not support hotplugging as EPC sections must be locked down during
pre-boot to provide EPC's security properties).
So even though EPC sections could be realized through the generic
-devices command, they need to be created much earlier for them to
actually be usable by the guest. Place all EPC sections in a
contiguous block, somewhat arbitrarily starting after RAM above 4g.
Ensuring EPC is in a contiguous region simplifies calculations, e.g.
device memory base, PCI hole, etc..., allows dynamic calculation of the
total EPC size, e.g. exposing EPC to guests does not require -maxmem,
and last but not least allows all of EPC to be enumerated in a single
ACPI entry, which is expected by some kernels, e.g. Windows 7 and 8.
The new compound properties command for sgx like below:
......
-object memory-backend-epc,id=mem1,size=28M,prealloc=on \
-object memory-backend-epc,id=mem2,size=10M \
-M sgx-epc.0.memdev=mem1,sgx-epc.1.memdev=mem2
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The alt_grab and ctrl_grab parameter of the -display sdl option prevent
the QAPIfication of the "sdl" part of the -display option, so we should
eventually remove them. And since this feature is also rather niche anyway,
we should not clutter the top-level option list with these, so let's
also deprecate the "-alt-grab" and the "-ctrl-grab" options while we're
at it.
Once the deprecation period of "alt_grab" and "ctrl_grab" is over, we
then can finally switch the -display sdl option to use QAPI internally,
too.
Message-Id: <20210825092023.81396-3-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The -display sdl option is not using QAPI internally yet, and uses hand-
crafted parsing instead (see parse_display() in vl.c), which is quite
ugly, since most of the other code is using the QAPIfied DisplayOption
already. Unfortunately, the "alt_grab" and "ctrl_grab" use underscores in
their names which has recently been forbidden in new QAPI code, so
a straight conversion is not possible. While we could add some exceptions
to the QAPI schema parser for this, the way these parameters have been
designed was maybe a bad idea anyway: First, it's not possible to enable
both parameters at the same time, thus instead of two boolean parameters
it would be better to have only one multi-choice parameter instead.
Second, the naming is also somewhat unfortunate since the "alt_grab"
parameter is not about the ALT key, but rather about the left SHIFT key
that has to be used additionally when the parameter is enabled.
So instead of trying to QAPIfy "alt_grab" and "ctrl_grab", let's rather
introduce an alternative to these parameters instead, a new parameter
called "grab-mod" which can either be set to "lshift-lctrl-lalt" or to
"rctrl". In case we ever want to support additional modes later, we can
then also simply extend the list of supported strings here.
Message-Id: <20210825092023.81396-2-thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing arguments to plugins had to be done through "arg=<argname>".
This is redundant and introduces confusion especially when the argument
has a name and value (e.g. `-plugin plugin_name,arg="argname=argvalue"`).
This allows passing plugin arguments directly e.g:
`-plugin plugin_name,argname=argvalue`
For now, passing arguments through "arg=" is still supports but outputs
a deprecation warning.
Also, this commit makes boolean arguments passed to plugins in the
`argname=on|off` form instead of the deprecated short-boolean form.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-2-ma.mandourr@gmail.com>
The documentation of the -machine memory-backend has some minor
formatting errors:
* Misindentation of the initial line meant that the whole option
section is incorrectly indented in the HTML output compared to
the other -machine options
* The examples weren't indented, which meant that they were formatted
as plain run-on text including outputting the "::" as text.
* The a) b) list has no rst-format markup so it is rendered as
a single run-on paragraph
Fix the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210719105257.3599-1-peter.maydell@linaro.org
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The parameters of intel-iommu device are non-trivial to understand. Add an
entry for it so that people can reference to it when using.
There're actually a few more options there, but I hide them explicitly because
they shouldn't be used by normal QEMU users.
Cc: Chao Yang <chayang@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jing Zhao <jinzhao@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210707154114.197580-1-peterx@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -smp option help is peculiarly specific about mentioning the CPU
upper limits, but these are wrong. The "PC" target has varying max
CPU counts depending on the machine type picked. Notes about guest
OS limits are inappropriate for QEMU docs. There are way too many
machine types for it to be practical to mention actual limits, and
some limits are even modified by downstream distribtions. Thus it
is better to remove the specific limits entirely.
The CPU topology reporting is also not neccessarily specific to the
PC platform and descriptions around the rules of usage are somewhat
terse. Expand this information with some examples to show effects
of defaulting.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The initial CPU count number is not required, if any of the topology
options are given, since it can be computed.
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The list of CPU topology options are presented in a fairly arbitrary
order currently. Re-arrange them so that they're ordered from largest to
smallest unit
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sdl and gtk display options support more parameters than currently
documented. Also the "vnc" option got lost during a recent commit,
add it again.
Fixes: ddc717581c ("Add display suboptions to man pages")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.
While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The mode=control argument configures a QMP monitor.
Signed-off-by: Ali Shirvani <alishir@routerhosting.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <0799f0de89ad2482672b5d61d0de61e6eba782da.1621407918.git.alishir@routerhosting.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These headers are also included from softmmu/vl.c, so they should be
in include/. Remove qemu-options-wrapper.h, since elsewhere
we include "template" headers directly and #define the parameters in
the including file; move qemu-options.h to include/.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a parameter for dirty gfn count for dirty rings. If zero, dirty ring is
disabled. Otherwise dirty ring will be enabled with the per-vcpu gfn count as
specified. If dirty ring cannot be enabled due to unsupported kernel or
illegal parameter, it'll fallback to dirty logging.
By default, dirty ring is not enabled (dirty-gfn-count default to 0).
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-9-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
'id' of memory-backend-{file,ram} is not only for '-numa''s reference, but
also other parameters like '-device nvdimm'.
More clearly call out this to avoid misinterpretation.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1619080922-83527-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Policy "crash" calls abort() when deprecated input is received.
Bugs in integration tests may mask the error from policy "reject".
Provide a larger hammer: crash outright. Masking that seems unlikely.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-12-armbru@redhat.com>
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
This is only semantically useful for QMP.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the new "password-secret" option, there is no reason to use the old
inecure "password" option with -spice, so it can be deprecated.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-4-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using SPICE the "password" option provides the password
in plain text on the command line. This is insecure as it is visible
to all processes on the host. As an alternative, the password can be
provided separately via the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--spice port=5901,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-3-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using VNC the "password" flag turns on password based
authentication. The actual password has to be provided separately via
the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--vnc localhost:0,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-2-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
