Add a line to the HTML document footer mentioning the QEMU version.
The version information is already provided in very faint text below
the QEMU logo in the sidebar, but that is rather inconspicious, so
repeating it in the footer seems useful.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-8-peter.maydell@linaro.org
The standard Sphinx/RTD HTML page footer gives a copyright line
(based on the 'copyright' variable set in conf.py) and a line "Built
with Sphinx using a theme provided by Read the Docs" (which can be
disabled via the html_show_sphinx variable, but we leave it enabled).
As a free software project, we'd like to also mention the license
QEMU and its manual are released under.
Add a template footer.html which defines the 'extrafooter' block that
the RtD theme provides for this purpose. The new line of text will
go below the existing copyright and sphinx-acknowledgement lines.
(Unfortunately the RTD footer template does not permit putting it
after the copyright but before the sphinx-acknowledgement.)
We use the templating functionality to make the new text also be a
hyperlink to the about/license.html page of the manual.
Unlike rst files, HTML template files are not reported to our depfile
plugin, so we maintain a manual list in meson.build. New template
files should be rare, so not being able to auto-generate the
dependency info is not too awkward.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-7-peter.maydell@linaro.org
Add some text to About to act as a brief introduction to the QEMU
manual and to make the about page a bit less of an abrupt start to
it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-6-peter.maydell@linaro.org
Now that we have a single Sphinx manual rather than multiple manuals,
we can provide a better place for "common to all of QEMU" information
like the deprecation notices, build platforms, license information,
which we currently have in the system/ manual even though it applies
to all of QEMU.
Create a new directory about/ on the same level as system/, user/,
etc, and move these documents there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-5-peter.maydell@linaro.org
Since the top-level subsections aren't self-contained manuals
any more, the "Contents:" lines at the top of each of their
index pages look a bit odd; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-4-peter.maydell@linaro.org
We merged our previous multiple-manual setup into a single Sphinx
manual, but we left some text in the various index.rst lines that
still calls the top level subsections separate 'manuals'. Update
them to talk about "this section of the manual" instead, and remove
now-obsolete comments about how the index.rst files are the "top
level page for the 'foo' manual".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-3-peter.maydell@linaro.org
In commit 6d8980a38f we updated the copyright string we present to
the user in -version output, About dialogs, etc, but we forgot that
the Sphinx manuals have a separate copyright string setting. Update
that one too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-2-peter.maydell@linaro.org
The functions vmsa_ttbcr_write and vmsa_ttbcr_raw_write expect
the offset to be for the complete TCR structure, not the offset
to the low 32-bits of a uint64_t. Using offsetoflow32 in this
case breaks big-endian hosts.
For TTBCR2, we do want the high 32-bits of a uint64_t.
Use cp15.tcr_el[*].raw_tcr as the offsetofhigh32 argument to
clarify this.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/187
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210709230621.938821-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lots of last minute stuff.
vhost-user-i2c.
vhost-vsock SOCK_SEQPACKET support.
IOMMU bypass.
ACPI based pci hotplug.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmDxoZ8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp76oH/1NJm5vFD+IjXC2sjKfxgqhi4QZGZOgU5rP6
fDQA4HA0VM0iO7wUqIwc77Dn2BJLDnHG2biNlr1E0LnUWcpTATjX9qlonMz4gFn0
1j49t1CmlkXinW55rVLsD5tjish1dR4mdzZMLQAxuUVxb5lH+rI2RDcbS2xrBs9G
jPOm5TBl1FDREqnToVpWD+/gaCQAvFyjpXbSBKDahsxAZDL9GCpcZKNGgyBQrnPK
1cYxPJZwTjVPwDXVArbFNCqUFemux2f5Hgx8gNFHomiNk9+mW0Q2quuVLwWHkbHC
KEI7ZTfpjJkDXsQayhQ7HCTsiFl0qwj44BNUX07ZvpNkxNXXRHM=
=4iA8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream3' into staging
pc,pci,virtio: lots of new features
Lots of last minute stuff.
vhost-user-i2c.
vhost-vsock SOCK_SEQPACKET support.
IOMMU bypass.
ACPI based pci hotplug.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 16:11:27 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream3:
vhost-vsock: SOCK_SEQPACKET feature bit support
docs: Add documentation for iommu bypass
hw/i386/acpi-build: Add IVRS support to bypass iommu
hw/i386/acpi-build: Add DMAR support to bypass iommu
hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3
hw/pci: Add pci_bus_range() to get PCI bus number range
hw/i386: Add a default_bus_bypass_iommu pc machine option
hw/arm/virt: Add default_bus_bypass_iommu machine option
hw/pxb: Add a bypass iommu property
hw/pci/pci_host: Allow PCI host to bypass iommu
docs: Add '-device intel-iommu' entry
hw/virtio: add vhost-user-i2c-pci boilerplate
hw/virtio: add boilerplate for vhost-user-i2c device
bios-tables-test: Update golden binaries
hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35
bios-tables-test: Allow changes in DSDT ACPI tables
hw/pci/pcie: Do not set HPC flag if acpihp is used
hw/acpi/ich9: Enable ACPI PCI hot-plug
hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds processing of VIRTIO_VSOCK_F_SEQPACKET features bit. Guest
negotiates it with vhost, thus both will know that SOCK_SEQPACKET
supported by peer.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Message-Id: <20210622144747.2949134-1-arseny.krasnov@kaspersky.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-10-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check bypass_iommu to exclude the devices which will bypass iommu.
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-9-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In DMAR table, the drhd is set to cover all PCI devices when intel_iommu
is on. To support bypass iommu feature, we need to walk the PCI bus with
bypass_iommu disabled and add explicit scope data in DMAR drhd structure.
/mnt/sdb/wxg/qemu-next/qemu/build/x86_64-softmmu/qemu-system-x86_64 \
-machine q35,accel=kvm,default_bus_bypass_iommu=true \
-cpu host \
-m 16G \
-smp 36,sockets=2,cores=18,threads=1 \
-device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3 \
-device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x4,bypass_iommu=true \
-device pcie-root-port,port=0x1,chassis=1,id=pci.11,bus=pci.10,addr=0x0 \
-device pcie-root-port,port=0x2,chassis=2,id=pci.21,bus=pci.20,addr=0x0 \
-device virtio-scsi-pci,id=scsi0,bus=pci.11,addr=0x0 \
-device virtio-scsi-pci,id=scsi1,bus=pci.21,addr=0x0 \
-drive file=/mnt/sdb/wxg/fedora-48g.qcow2,format=qcow2,if=none,id=drive-scsi0-0-0-0,cache=none,aio=native \
-device scsi-hd,bus=scsi1.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=1 \
-device intel-iommu \
-nographic \
And we get the guest configuration:
~ lspci -vt
-+-[0000:20]---00.0-[21]----00.0 Red Hat, Inc. Virtio SCSI
+-[0000:10]---00.0-[11]----00.0 Red Hat, Inc. Virtio SCSI
\-[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
+-01.0 Device 1234:1111
+-02.0 Intel Corporation 82574L Gigabit Network Connection
+-03.0 Red Hat, Inc. QEMU PCIe Expander bridge
+-04.0 Red Hat, Inc. QEMU PCIe Expander bridge
+-1f.0 Intel Corporation 82801IB (ICH9) LPC Interface Controller
+-1f.2 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]
\-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller
With bypass_iommu enabled on root bus, the attached devices will bypass iommu:
/sys/class/iommu/dmar0
├── devices
│ ├── 0000:10:00.0 -> ../../../../pci0000:10/0000:10:00.0
│ └── 0000:11:00.0 -> ../../../../pci0000:10/0000:10:00.0/0000:11:00.0
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-8-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we build IORT table with SMMUv3 and bypass iommu feature enabled,
we can no longer setup one map from RC to SMMUv3 covering the whole RIDs.
We need to walk the PCI bus and check whether the root bus will bypass
iommu, setup RC -> SMMUv3 -> ITS map for RC which will not bypass iommu.
When a SMMUv3 node exist, we setup the idmap from SMMUv3 to ITS
covering the whole RIDs, and only modify the map from RC to SMMUv3.
We build RC -> SMMUv3 -> ITS map for root bus with bypass_iommu
disabled, and build idmap from RC to ITS directly for the rest of
the whole RID space.
For example we run qemu with command line:
qemu/build/aarch64-softmmu/qemu-system-aarch64 \
-kernel arch/arm64/boot/Image \
-enable-kvm \
-cpu host \
-m 8G \
-smp 8,sockets=2,cores=4,threads=1 \
-machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3,default_bus_bypass_iommu=true \
-drive file=./QEMU_EFI-pflash.raw,if=pflash,format=raw,unit=0,readonly=on \
-device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \
-device pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x3.0x2,bypass_iommu=true \
-device pcie-root-port,port=0x20,chassis=1,id=pci.1,bus=pcie.0,addr=0x2 \
-device pcie-root-port,port=0x20,chassis=11,id=pci.11,bus=pci.10,addr=0x1 \
-device pcie-root-port,port=0x20,chassis=21,id=pci.21,bus=pci.20,addr=0x1 \
-device virtio-scsi-pci,id=scsi0,bus=pci.1,addr=0x1 \
-device virtio-scsi-pci,id=scsi1,bus=pci.11,addr=0x1 \
-device virtio-scsi-pci,id=scsi2,bus=pci.21,addr=0x1 \
-initrd /mnt/davinci/wxg/kill-linux/rootfs/mfs.cpio.gz \
-nographic \
-append "rdinit=init console=ttyAMA0 earlycon=pl011,0x9000000 nokaslr" \
And we get guest configuration:
-+-[0000:20]---01.0-[21]--
+-[0000:10]---01.0-[11]--
\-[0000:00]-+-00.0 Device 1b36:0008
+-01.0 Device 1af4:1000
\-02.0-[01]--
With bypass_iommu enabled, the attached devices will bypass iommu.
/sys/class/iommu/smmu3.0x0000000009050000/
|-- device -> ../../../arm-smmu-v3.0.auto
|-- devices
| `-- 0000:10:01.0 -> ../../../../../pci0000:10/0000:10:01.0
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-7-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This helps to get the min and max bus number of a PCI bus hierarchy.
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <1625748919-52456-6-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a default_bus_bypass_iommu pc machine option to enable/disable
bypass_iommu for default root bus. The option is disabled by default
and can be enabled with:
$QEMU -machine q35,default_bus_bypass_iommu=true
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-5-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a default_bus_bypass_iommu machine option to enable/disable
bypass_iommu for default root bus. The option is disabled by
default and can be enabled with:
$QEMU -machine virt,iommu=smmuv3,default_bus_bypass_iommu=true
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Message-Id: <1625748919-52456-4-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a bypass_iommu property for pci_expander_bridge, the property
is used to indicate whether pxb root bus will bypass iommu. By
default the bypass_iommu is disabled, and it can be enabled with:
qemu -device pxb-pcie,bus_nr=0x10,addr=0x1,bypass_iommu=true
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <1625748919-52456-3-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new bypass_iommu property for PCI host and use it to check
whether devices attached to the PCI root bus will bypass iommu.
In pci_device_iommu_address_space(), check the property and
avoid getting iommu address space for devices bypass iommu.
Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <1625748919-52456-2-git-send-email-wangxingang5@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The parameters of intel-iommu device are non-trivial to understand. Add an
entry for it so that people can reference to it when using.
There're actually a few more options there, but I hide them explicitly because
they shouldn't be used by normal QEMU users.
Cc: Chao Yang <chayang@redhat.com>
Cc: Lei Yang <leiyang@redhat.com>
Cc: Jing Zhao <jinzhao@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210707154114.197580-1-peterx@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-i2c device as part of a PCI
bus. It is mostly boilerplate which looks pretty similar to the
vhost-user-fs-pci device.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <8a083eaa57d93feaab12acd1f94b225879212f20.1625806763.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-i2c device which connects
to the remote daemon. It is based of vhost-user-fs code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <e80591b52fea4b51631818bb92a798a3daf90399.1625806763.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35 has three different types of PCI devices hot-plug: PCIe Native,
SHPC Native and ACPI hot-plug. This patch changes the default choice
for cold-plugged bridges from PCIe Native to ACPI Hot-plug with
ability to use SHPC and PCIe Native for hot-plugged bridges.
This is a list of the PCIe Native hot-plug issues that led to this
change:
* no racy behavior during boot (see 110c477c2e)
* no delay during deleting - after the actual power off software
must wait at least 1 second before indicating about it. This case
is quite important for users, it even has its own bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1594168
* no timer-based behavior - in addition to the previous example,
the attention button has a 5-second waiting period, during which
the operation can be canceled with a second press. While this
looks fine for manual button control, automation will result in
the need to queue or drop events, and the software receiving
events in all sort of unspecified combinations of attention/power
indicator states, which is racy and uppredictable.
* fixes:
* https://bugzilla.redhat.com/show_bug.cgi?id=1752465
* https://bugzilla.redhat.com/show_bug.cgi?id=1690256
To return to PCIe Native hot-plug:
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Known issue: older linux guests need the following flag
to allow hotplugged pci express devices to use io:
-device pcie-root-port,io-reserve=4096.
io is unusual for pci express so this seems minor.
We'll fix this by a follow up patch.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-6-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
All DSDT Q35 tables will be modified because ACPI hot-plug is enabled
by default.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20210713004205.775386-5-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of changing the hot-plug type in _OSC register, do not
set the 'Hot-Plug Capable' flag. This way guest will choose ACPI
hot-plug if it is preferred and leave the option to use SHPC with
pcie-pci-bridge.
The ability to control hot-plug for each downstream port is retained,
while 'hotplug=off' on the port means all hot-plug types are disabled.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210713004205.775386-4-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add acpi_pcihp to ich9_pm as part of
'acpi-pci-hotplug-with-bridge-support' option. Set default to false.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-3-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Implement notifications and gpe to support q35 ACPI PCI hot-plug.
Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20210713004205.775386-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmDu+xsACgkQ+9DbCVqe
KkQ2XAf+MRBeSMX9J091iloiqSjpuobAcVuoIFciG7gEqWd2iTQVPDqJNgBJUANQ
vTA7f89ljxj/FZjSZwLgR6cqY6X0ufXI1BLEIt7s78LJtVp14sHVo89GwNBzmRwo
615T49KG8b5EBBU5YlVcAW/m8DlfgI4b1ufS/qHldOukKegu+haoCDjGG6RNpYNx
mmXgLOBJiB/p2u2S73KTIa+3AEIIlsTJZpdLPus8hby+/Q4qB9t8YbdHaweyM9qs
NjiojczvlbHLFd/IQSl6fqBS9QI+KWf4+oFd6ZB4THhr9/GUYTiMeLjRKucBgDQG
TwGtd1RN3gAPI5aEJ0xlgCL/crz1qg==
=dQl6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugins-140721-5' into staging
Testing and plugin updates:
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
# gpg: Signature made Wed 14 Jul 2021 15:56:27 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugins-140721-5: (44 commits)
MAINTAINERS: Added myself as a reviewer for TCG Plugins
docs/devel: Added cache plugin to the plugins docs
plugins/cache: Added FIFO and LRU eviction policies
plugins/cache: Enable cache parameterization
plugins: Added a new cache modelling plugin
docs/devel: tcg-plugins: add execlog plugin description
contrib/plugins: add execlog to log instruction execution and memory access
contrib/plugins: enable -Wall for building plugins
tcg/plugins: enable by default for most TCG builds
configure: stop user enabling plugins on Windows for now
configure: add an explicit static and plugins check
configure: don't allow plugins to be enabled for a non-TCG build
tcg/plugins: remove some stale entries from the symbol list
meson.build: relax the libdl test to one for the function dlopen
meson.build: move TCG plugin summary output
plugins: fix-up handling of internal hostaddr for 32 bit
tests/tcg: make test-mmap a little less aggressive
tests/vm: update openbsd to release 6.9
tests/vm: update NetBSD to 9.2
tests/docker: expand opensuse-leap package list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New test case enum-dict-no-name.json crashes:
$ python3 scripts/qapi-gen.py tests/qapi-schema/enum-dict-no-name.json
Traceback (most recent call last):
[...]
File "/work/armbru/qemu/scripts/qapi/expr.py", line 458, in check_enum
member_name = member['name']
KeyError: 'name'
Root cause: we try to retrieve member 'name' before we check for
missing members. With that fixed, we get the expected error "'data'
member misses key 'name'".
Fixes: 0825f62c84
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210616072121.626431-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Coverity reports that we don't check the error result of fdt_pack(), so
let's save the result and assert that it is 0.
Fixes: Coverity CID 1458136
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 07325315b49d5555269f76094e4bc5296e0643b9.1626303527.git.alistair.francis@wdc.com
Currently the firmware dynamic info (fw_dyn) is put right after
the reset vector, which is not 8-byte aligned on RV64. OpenSBI
fw_dynamic uses ld to read contents from 'struct fw_dynamic_info',
which expects fw_dyn to be on the 8-byte boundary, otherwise the
misaligned load exception may happen. Fortunately this does not
cause any issue on QEMU, as QEMU does support misaligned load.
RV32 does not have any issue as it is 4-byte aligned already.
Change to make sure it is 8-byte aligned which works for both
RV32 and RV64.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210708143319.10441-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the CLINT timebase frequency is set to 10MHz on sifive_u,
but on the real hardware the timebase frequency is 1Mhz.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210706102616.1922469-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds a new section in the documentation to demonstrate how to
use the new direct kernel boot feature for Microchip Icicle Kit,
other than the HSS bootflow, using an upstream U-Boot v2021.07 image
as an example.
It also updates the truth table to have a new '-dtb' column which is
required by direct kernel boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210706095045.1917913-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The specification mandates for certain bits to be hardwired in the
hypervisor delegation registers. This was not being enforced.
Signed-off-by: Jose Martins <josemartins90@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210522155902.374439-1-josemartins90@gmail.com
[ Changes by AF:
- Improve indentation
- Convert delegable_excps to a #define to avoid failures with GCC 8
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds detailed documentation for RISC-V `virt` machine,
including the following information:
- Supported devices
- Hardware configuration information
- Boot options
- Running Linux kernel
- Running U-Boot
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627142816.19789-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
It's Core *Local* Interruptor, not 'Level'.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627142816.19789-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following check:
if (!env->debugger && !riscv_cpu_fp_enabled(env)) {
return -RISCV_EXCP_ILLEGAL_INST;
}
is redundant in fflags/frm/fcsr read/write routines, as the check was
already done in fs().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627120604.11116-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
%s/CSP/CSR
%s/thie/the
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210627115716.3552-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
I've relinquished my edk2 roles with the following commit message [1] [2]
[3]:
> Maintainers.txt: remove Laszlo Ersek's entries
>
> I'm relinquishing all my roles listed in "Maintainers.txt", for personal
> reasons.
>
> My email address <lersek@redhat.com> remains functional.
>
> To my understanding, my employer is working to assign others engineers
> to the edk2 project (at their discretion).
[1] https://edk2.groups.io/g/devel/message/77585
[2] https://listman.redhat.com/archives/edk2-devel-archive/2021-July/msg00202.html
[3] http://mid.mail-archive.com/20210708070916.8937-1-lersek@redhat.com
Accordingly, remove my entries from QEMU's MAINTAINERS file as well, which
all relate to guest firmware.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kashyap Chamarthy <kchamart@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210708071409.9671-1-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce the X86_FW_OVMF Kconfig symbol for OVMF-specific code.
Move the OVMF-specific code from pc_sysfw.c to pc_sysfw_ovmf.c,
adding a pair of stubs.
Update MAINTAINERS to reach OVMF maintainers when these new
files are modified.
This fixes when building the microvm machine standalone:
/usr/bin/ld: libqemu-i386-softmmu.fa.p/target_i386_monitor.c.o: in
function `qmp_sev_inject_launch_secret':
target/i386/monitor.c:749: undefined reference to `pc_system_ovmf_table_find'
Fixes: f522cef9b3 ("sev: update sev-inject-launch-secret to make gpa optional")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-22-philmd@redhat.com>
